Commit graph

94,495 commits

Author SHA1 Message Date
Sascha Hauer
89121a6bfe mxc nand: simplify command processing
Instead of having two switch/case with other operations
in between, use only one switch/case

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:32:39 +01:00
Sascha Hauer
f8f9608d9b mxc nand: use buffers
The NAND controller has some limitations how to access the
internal buffers. It only allows 32 bit accesses. The driver
used to work around this by having special alignment aware
copy routines.
We now copy the whole page to a buffer in memory and let the
access functions use this buffer. This simplifies the driver.
A bonnie++ test showed that this has no negative performance
impact on the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:32:32 +01:00
Sascha Hauer
d970a0730b mxc nand: use resource_size()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:32:24 +01:00
Sascha Hauer
a4ad57f8b3 mxc nand: remove dead code
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:32:19 +01:00
Sascha Hauer
6246549174 mxc nand: remove debug param
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:32:13 +01:00
Sascha Hauer
a3e65b64d5 mxc_nand: introduce mxc_do_addr_cycle
This factors the address cycle to a seperate function. This
becomes useful in a later patch where we can simplify the
command processing by making use of this function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:31:49 +01:00
Sascha Hauer
06ecb04ac5 mxc_nand: merge send_read_page and send_prog_page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:31:41 +01:00
Sascha Hauer
13e1add107 mxc_nand: cleanup initialization
The oob layout was initialized several times. Instead, use
a smallpage layout by default and switch to a largepage
afterwards if necessary.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:31:37 +01:00
Sascha Hauer
8c1fd89a85 mxc_nand: cleanup eccoob descriptions
The original Freescale driver used to have eccoob descriptions like
this:

static struct nand_ecclayout nand_hw_eccoob_8 = {
	.eccbytes = 5,
	.eccpos = {6, 7, 8, 9, 10},
	.oobfree = {{0, 5}, {11, 5}}
};

static struct nand_ecclayout nand_hw_eccoob_16 = {
	.eccbytes = 5,
	.eccpos = {6, 7, 8, 9, 10},
	.oobfree = {{0, 6}, {12, 4}}
};

The former was used for 8bit flashes and the latter for 16bit flashes.
They honored the fact that the bad block marker on 8bit flashes is on byte 5
while on 16bit flashes it is on byte 11.
In the Kernel driver this was copied wrong and we ended up with two identical
descriptions.

Change it so that we have only one description which leaves byte 5 and byte
11 unspecified so that it won't be used by others.

Also, rename the descriptions to nand_hw_eccoob_smallpage and
nand_hw_eccoob_largepage so that it can't be confused with Nand chip bus
widths (what actually happened in this driver)

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-12 08:31:28 +01:00
Anton Vorontsov
4c1fba4429 spi_mpc8xxx: Add support for QE DMA mode and CPM1/CPM2 chips
This patch adds QE buffer descriptors mode support for the
spi_mpc8xxx driver, and as a side effect we now support CPM1
and CPM2 SPI controllers.

That means that today we support almost all MPC SPI controllers:

- MPC834x-style controllers (support PIO mode only);
- CPM1 and CPM2 controllers (support DMA mode only);
- QE SPI controllers in CPU mode (PIO mode with shift quirks);
- QE SPI controllers in buffer descriptors (DMA) mode;

The only controller we don't currently support is a newer eSPI
(with a dedicated chip selects and a bit different registers map).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:26 -06:00
Anton Vorontsov
87ec0e98cf spi_mpc8xxx: Turn qe_mode into flags
Soon there will be more flags introduced in subsequent patches, so
let's turn qe_mode into flags.

Also introduce mpc8xxx_spi_strmode() and print current SPI mode.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:25 -06:00
Anton Vorontsov
a35c171095 spi_mpc8xxx: Factor out SPI mode change steps into a call
We'll add more steps soon, so get rid of the duplication.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:23 -06:00
Anton Vorontsov
783058fd58 spi_mpc8xxx: Fix uninitialized variable
This patch fixes the following warning:

CC      drivers/spi/spi_mpc8xxx.o
  spi_mpc8xxx.c: In function 'of_mpc8xxx_spi_probe':
  spi_mpc8xxx.c:681: warning: 'ret' may be used uninitialized in this function

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:21 -06:00
Anton Vorontsov
58c12bdc5d powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds
This is needed to avoid ugly #ifdefs in drivers. Also update fsl_qe_udc
driver so that now it doesn't define its own versions that cause build
breakage when the generic stubs are used.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:20 -06:00
Ben Dooks
c029f4440f DM9000: Wake on LAN support
Add support for Wake on LAN (WOL) reception and waking the device up from
this signal via the ethtool interface. Currently we are only supporting
the magic-packet variant of wakeup.

WOL is enabled by specifying a second interrupt resource to the driver
which indicates where the interrupt for the WOL is being signalled. This
then enables the necessary ethtool calls to leave the device in a state
to receive WOL frames when going into suspend.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:22:21 -08:00
Ali Gholami Rudi
f9254edaab ixgbe: r_idx not used in ixgbe_msix_clean_rx()
The values of r_idx and rx_ring are not used after the last time they
are set in ixgbe_msix_clean_rx(), so they can be removed.

Signed-off-by: Ali Gholami Rudi <ali@rudi.ir>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:22:19 -08:00
Ron Mercer
7e5ca6a22d qlge: Change version to v1.00.00.23.00.00-01.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:12:12 -08:00
Ron Mercer
a5a62a1c7f qlge: Clean up module parameter name.
Change it to match qlge_xxx convention.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:12:10 -08:00
Ron Mercer
74e1243549 qlge: Add asic reset to open call.
Force asic to known state at open().

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:12:06 -08:00
Ron Mercer
4fc9b8697c qlge: Do not change frame routing during suspend.
We do not need to change the frame routing to direct all frames to the
management fifo during suspend.  This is now done by the firmware.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:12:05 -08:00
Anton Vorontsov
a3bc1f11e9 gianfar: Revive SKB recycling
Before calling gfar_clean_tx_ring() the driver grabs an irqsave
spinlock, and then tries to recycle skbs. But since
skb_recycle_check() returns 0 with IRQs disabled, we'll never
recycle any skbs.

It appears that gfar_clean_tx_ring() and gfar_start_xmit() are
mostly idependent and can work in parallel, except when they
modify num_txbdfree.

So we can drop the lock from most sections and thus fix the skb
recycling.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:03:36 -08:00
Anton Vorontsov
836cf7faf8 gianfar: Fix race between gfar_error() and gfar_start_xmit()
gfar_error() can arrive at the middle of gfar_start_xmit() processing,
and so it can trigger transfers of BDs that we don't yet expect to
be transmitted.

Fix this by locking the tx queues in gfar_error().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:03:35 -08:00
Anton Vorontsov
499428ed28 gianfar: Fix thinko in gfar_set_rx_stash_index()
We obviously want to write a modified 'temp' value back to the
register, not the saved IRQ flags.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:03:34 -08:00
Anton Vorontsov
5ea681d4e6 gianfar: Fix build with CONFIG_PM=y
commit fba4ed030c ("gianfar: Add Multiple
Queue Support") introduced the following build failure:

  CC      gianfar.o
gianfar.c: In function 'gfar_restore':
gianfar.c:1249: error: request for member 'napi' in something not a structure or union

This patch fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:03:33 -08:00
Anton Vorontsov
4dea29d066 gianfar: Remove 'Interrupt problem!' warning
It is OK to poll with disabled IRQs, so remove the warning.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11 19:03:30 -08:00
Fenghua Yu
99dcadede4 intel-iommu: Support PCIe hot-plug
To support PCIe hot plug in IOMMU, we register a notifier to respond to device
change action.

When the notifier gets BUS_NOTIFY_UNBOUND_DRIVER, it removes the device
from its DMAR domain.

A hot added device will be added into an IOMMU domain when it first does IOMMU
op. So there is no need to add more code for hot add.

Without the patch, after a hot-remove, a hot-added device on the same
slot will not work.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-12 02:28:45 +00:00
Alex Williamson
e8bb910d1b intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough
The model for IOMMU passthrough is that decent devices that can cope
with DMA to all of memory get passthrough; crappy devices with a limited
dma_mask don't -- they get to use the IOMMU anyway.

This is done on the basis that IOMMU passthrough is usually wanted for
performance reasons, and it's only the decent PCI devices that you
really care about performance for, while the crappy 32-bit ones like
your USB controller can just use the IOMMU and you won't really care.

Unfortunately, the check for this was only looking at dev->dma_mask, not
at dev->coherent_dma_mask. And some devices have a 32-bit
coherent_dma_mask even though they have a full 64-bit dma_mask.

Even more unfortunately, fixing that simple oversight would upset
certain broken HP devices. Not only do they have a 32-bit
coherent_dma_mask, but they also have a tendency to do stray DMA to
unmapped addresses. And then they die when they take the DMA fault they
so richly deserve.

So if we do the 'correct' fix, it'll mean that affected users have to
disable IOMMU support completely on "a large percentage of servers from
a major vendor."

Personally, I have little sympathy -- given that this is the _same_
'major vendor' who is shipping machines which claim to have IOMMU
support but have obviously never _once_ booted a VT-d capable OS to do
any form of QA. But strictly speaking, it _would_ be a regression even
though it only ever worked by fluke.

For 2.6.33, we'll come up with a quirk which gives swiotlb support
for this particular device, and other devices with an inadequate
coherent_dma_mask will just get normal IOMMU mapping.

The simplest fix for 2.6.32, though, is just to jump through some hoops
to try to allocate coherent DMA memory for such devices in a place that
they can reach. We'd use dma_generic_alloc_coherent() for this if it
existed on IA64.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-12 02:10:34 +00:00
NeilBrown
5e8651060c md: factor out updating of 'recovery_offset'.
Each device has its own 'recovery_offset' showing how far
recovery has progressed on the device.
As the only real significance of this is that fact that it can
be stored in the metadata and recovered at restart, and as
only 1.x metadata can do this, we were only updating
'recovery_offset' to 'curr_resync_completed' when updating
v1.x metadata.
But this is wrong, and we will shortly make limited use of this
field in v0.90 metadata.

So move the update into common code.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-12 12:08:04 +11:00
Benjamin Herrenschmidt
0526484aa3 Merge commit 'origin/master' into next 2009-11-12 10:59:04 +11:00
Gertjan van Wingerde
41a2617064 rt2x00: Fix typo in rf programming of rt2800lib.
Fix a type in rt2800_config_channel_rt3x. The second write to RF
register 2 should be to RF register 3.  This is confirmed by the
legacy Ralink code.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:18 -05:00
Thadeu Lima de Souza Cascardo
b34e620faa rt2x00: fix some typos and punctuation in comments
fix some typos and punctuation in comments

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:18 -05:00
Jason Andryuk
13b409cc8c at76c50x-usb: Supply additional parameters to at76_start_monitor scan request
For my Linksys WUSB11 at76c503-i3861 device, scanning fails without
probe_delay, min_channel_time, and max_channel_time specified for the
scan request.  These values were found by checking scan requests from
the at76_usb driver.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:17 -05:00
Jason Andryuk
a6ef92ad35 at76c50x-usb: Remove mac2str and replace with %pM format specifier.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:17 -05:00
Gertjan van Wingerde
9c9a0d145f rt2x00: Update copyright statements.
As mentioned on the linux-wireless mailing list, the current copyright
statements in the rt2x00 are meaningless, as the rt2x00 project is
not even a formal legal entity. Therefore it is better to replace
the existing copyright statements with copyright statements for the
people that actually wrote the code.

Note: Updated to the best of my knowledge with respect to who
contributed considerable amounts of code.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:17 -05:00
Bartlomiej Zolnierkiewicz
6aefbfa020 rt2500usb: remove dead link tuning code
Link tuning code from the legacy rt2570 driver turned out to be
harmful and got disabled by the commit d06193f ("rt2x00: Disable
link tuning in rt2500usb") in August 2008.

There is no reason to keep this dead code any longer so remove it
(it can still be retrieved from the git history if necessary).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:16 -05:00
Bartlomiej Zolnierkiewicz
40beee5c15 rt2800usb: add eFuse EEPROM support
It is needed for at least RT3070 chip.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:16 -05:00
Bartlomiej Zolnierkiewicz
30e840346c rt2800: add eFuse EEPROM support code to rt2800lib
eFuse EEPROM is used also by USB chips (i.e. RT3070)
so move the needed code from rt2800pci to rt2800lib.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:16 -05:00
Bartlomiej Zolnierkiewicz
4116cb483e rt2800usb: fix RX descriptor naming
Rename RXD_W0_* defines to RXINFO_W0_* ones to match naming
used for TX descriptor and by the vendor driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:15 -05:00
Bartlomiej Zolnierkiewicz
4da2933fe1 rt2800: unify rt2800*_probe_hw_mode()
Add rf_vals tables and rt2800_probe_hw_mode() to rt2800lib.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:15 -05:00
Bartlomiej Zolnierkiewicz
f2b38cbfd9 rt2800: prepare for rt2800*_probe_hw_mode() unification
Enclose interface specific code in rt2800[pci,usb]_probe_hw_mode()
with rt2x00_intf_is_[pci,usb]() checks.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:14 -05:00
Bartlomiej Zolnierkiewicz
726984b61e rt2800usb: reorganize code in rt2800usb_probe_hw_mode()
Move hw_mode information initialization code block before
HT information initialization one to match the ordering used
by rt2800pci's rt2800pci_probe_hw_mode().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:14 -05:00
Bartlomiej Zolnierkiewicz
4d685e550b rt2800pci: add missing RF values to rf_vals table
rt2800pci's rf_vals[] copy was missing values for some channels.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:14 -05:00
Bartlomiej Zolnierkiewicz
38bd7b8a0f rt2800: unify EEPROM support code
Add rt2800_validate_eeprom() and rt2800_init_eeprom() to rt2800lib.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:14 -05:00
Bartlomiej Zolnierkiewicz
7ab71325cf rt2800: prepare for unification of EEPROM support code
* Factor out common code from rt2800[pci,usb]_validate_eeprom()
  to rt2800_validate_eeprom().

* Fix interface specific comment in rt2800[pci,usb]_validate_eeprom().

* Enclose interface specific code in rt2800[pci,usb]_init_eeprom()
  with rt2x00_intf_is_[pci,usb]() checks.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:13 -05:00
Ivo van Doorn
863cc978a7 rt2x00: Remove deprecated ieee80211_rx_status->qual usage
ieee80211_rx_status->qual has been marked deprecated.
This allows us to remove several functions and fields which
were used to calculate a reasonable value for it.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:13 -05:00
Gertjan van Wingerde
a65986824d rt2x00: Add dynamic detection of eFuse EEPROM in rt2800pci.
Instead of assuming that all rt3090 devices will have an eFuse EEPROM,
do as the legacy Ralink driver, and detect at run-time whether an
eFuse EEPROM is present.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:11 -05:00
Luis R. Rodriguez
748d451028 ath9k_common: clarify and correct jumbogram processing
Jumbograms are frames put together linked together through
more than one descriptor. For example ath9k_htc will use this
to send from the target a large frame split up into 2 or more
segments. The driver then would be in charge of putting the
frame back together.

When jumbograms are constructed the rx_stats->rs_more will
bet set and rx_stats->rs_status will not have any valid content
as the actual status will only be avialable at the end of
the chained descriptors.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:11 -05:00
Luis R. Rodriguez
165864d087 ath9k_common: remove ath9k_compute_qual()
This is now deprecated and unused within mac80211, so time
to remove it as otherwise we'd be doing some unecessary
computations for nothing.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:11 -05:00
Luis R. Rodriguez
db86f07ec6 ath9k_common: add new module to share 802.11n driver helpers
ath9k and ath9k_htc share a lot of common hardware characteristics.
They only differ in that ath9k_htc works with a target CPU and ath9k
works directly with the hardware. ath9k_htc will do *some* things in
the firmware, but a lot of others on the host.

The common 802.11n hardware code is already shared through the ath9k_hw
module. Common helpers amongst all Atheros drivers can use the ath module,
this includes ath5k and ar9170 as users. But there is some common driver
specific helpers which are not exactly hardware code which ath9k and
ath9k_htc can share. We'll be using ath9k_common for this to avoid
bloating the ath module and the common 802.11n hardware module ath9k_hw.

We start by sharing skb pre and post processing in preparation for a hand
off to mac80211.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:11 -05:00
Luis R. Rodriguez
c9b1417055 ath9k: move RX skb post processing to a helper
Use a helper for the RX skb post processing,
ath9k_rx_skb_postprocess().

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11 17:09:10 -05:00