Commit graph

94,495 commits

Author SHA1 Message Date
Len Brown
c1db9d9bb2 Merge branch 'misc-2.6.35' into release 2010-06-12 01:16:51 -04:00
Len Brown
42de5532f4 Merge branch 'bugzilla-13931-sleep-nvs' into release
Conflicts:
	drivers/acpi/sleep.c

Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 01:15:40 -04:00
Len Brown
e9e8b4dd14 Merge branch 'bugzilla-102904-workaround' into release 2010-06-12 00:58:01 -04:00
Len Brown
d9a799d197 Merge branch 'acpica-cherry-pick' into release 2010-06-12 00:56:15 -04:00
Matthew Garrett
b681f7d9ab ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
This feature is optional and is enabled if the BIOS requests any
Windows OSI strings. It can also be enabled by the host OS.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:55:50 -04:00
Bob Moore
9cbfa18e8a ACPICA: Limit maximum time for Sleep() operator
To prevent accidental deep sleeps, limit the maximum time that
Sleep() will sleep. Configurable, default maximum is two seconds.
ACPICA bugzilla 854.

http://www.acpica.org/bugzilla/show_bug.cgi?id=854

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:55:17 -04:00
Len Brown
a48ecc7718 Merge branch 'acpi_pad' into release 2010-06-12 00:52:19 -04:00
Len Brown
9263482557 Merge branch 'gpe-regression-fixes' into release 2010-06-12 00:51:49 -04:00
Rafael J. Wysocki
9d3c752de6 ACPI / ACPICA: Fix sysfs GPE interface
The sysfs interface allowing user space to disable/enable GPEs
doesn't work correctly, because a GPE disabled this way will be
re-enabled shortly by acpi_ev_asynch_enable_gpe() if it was
previosuly enabled by acpi_enable_gpe() (in which case the
corresponding bit in its enable register's enable_for_run mask is
set).

To address this issue make the sysfs GPE interface use
acpi_enable_gpe() and acpi_disable_gpe() instead of acpi_set_gpe()
so that GPE reference counters are modified by it along with the
values of GPE enable registers.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:45:28 -04:00
Rafael J. Wysocki
ce43ace023 ACPI / ACPICA: Fix GPE initialization
While developing the GPE reference counting code we overlooked the
fact that acpi_ev_update_gpes() could have enabled GPEs before
acpi_ev_initialize_gpe_block() was called.  As a result, some GPEs
are enabled twice during the initialization.

To fix this issue avoid calling acpi_enable_gpe() from
acpi_ev_initialize_gpe_block() for the GPEs that have nonzero
runtime reference counters.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:45:19 -04:00
Rafael J. Wysocki
c9a8bbb770 ACPI / ACPICA: Avoid writing full enable masks to GPE registers
ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after
an event signaled by it has been handled.  However, this function
writes the entire GPE enable mask to the GPE's enable register which
may not be correct.  Namely, if one of the other GPEs in the same
register was previously enabled by acpi_enable_gpe() and subsequently
disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will
re-enable it along with the target GPE.

To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it
calls acpi_hw_low_set_gpe() with a special action value,
ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the
corresponding bit in its register's enable_for_run mask is set.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:45:05 -04:00
Rafael J. Wysocki
fd247447c1 ACPI / ACPICA: Fix low-level GPE manipulation code
ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level,
which is incorrect, because this function only enables the GPE if the
corresponding bit in its enable register's enable_for_run mask is set.
This causes acpi_set_gpe() to work incorrectly if used for enabling
GPEs that were not previously enabled with acpi_enable_gpe().  As a
result, among other things, wakeup-only GPEs are never enabled by
acpi_enable_wakeup_device(), so the devices that use them are unable
to wake up the system.

To fix this issue remove acpi_ev_enable_gpe() and its counterpart
acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with
acpi_hw_low_set_gpe() that will be used instead to manipulate GPE
enable bits at the low level.  Make the users of acpi_ev_enable_gpe()
and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and
make sure that GPE enable masks are only updated by acpi_enable_gpe()
and acpi_disable_gpe() when GPE reference counters change from 0
to 1 and from 1 to 0, respectively.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-12 00:44:37 -04:00
Michael Chan
cbd6890c59 bnx2: Fix compiler warning in bnx2_disable_forced_2g5().
drivers/net/bnx2.c: In function 'bnx2_disable_forced_2g5':
drivers/net/bnx2.c:1489: warning: 'bmcr' may be used uninitialized in this function

We fix it by checking return values from all bnx2_read_phy() and proceeding
to do read-modify-write only if the read operation is successful.

The related bnx2_enable_forced_2g5() is also fixed the same way.

Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 18:37:07 -07:00
Dan Carpenter
fc0ba8e871 enic: cleanup vic_provinfo_alloc()
If oui were a null variable then vic_provinfo_alloc() would leak memory.
But this function is only called from one place and oui is not null so
I removed the check.

I also moved the memory allocation down a line so it was easier to spot.
(No one ever reads variable declarations).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 18:37:07 -07:00
Rafael J. Wysocki
e4e9a73599 ACPI / ACPICA: Use helper function for computing GPE masks
In quite a few places ACPICA needs to compute a GPE enable mask with
only one bit, corresponding to a given GPE, set.  Currently, that
computation is always open coded which leads to unnecessary code
duplication.  Fix this by introducing a helper function for computing
one-bit GPE enable masks and using it where appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-11 18:54:54 -04:00
Rafael J. Wysocki
a997ab3328 ACPI / ACPICA: Do not attempt to disable GPE when installing handler
Commit 0f849d2cc6 (ACPICA: Minimize
the differences between linux GPE code and ACPICA code base)
introduced a change attempting to disable a GPE before installing
a handler for it in acpi_install_gpe_handler() which was incorrect.
First, the GPE disabled by it is never enabled again (except during
resume) which leads to battery insert/remove events not being
reported on the Maxim Levitsky's machine.  Second, the disabled
GPE is still reported as enabled by the sysfs interface that only
checks its enable register's enable_for_run mask.

Revert this change for now, because it causes more damage to happen
than the bug it was supposed to fix.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-11 18:40:43 -04:00
Linus Torvalds
4cea8706c3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  wimax/i2400m: fix missing endian correction read in fw loader
  net8139: fix a race at the end of NAPI
  pktgen: Fix accuracy of inter-packet delay.
  pkt_sched: gen_estimator: add a new lock
  net: deliver skbs on inactive slaves to exact matches
  ipv6: fix ICMP6_MIB_OUTERRORS
  r8169: fix mdio_read and update mdio_write according to hw specs
  gianfar: Revive the driver for eTSEC devices (disable timestamping)
  caif: fix a couple range checks
  phylib: Add support for the LXT973 phy.
  net: Print num_rx_queues imbalance warning only when there are allocated queues
2010-06-11 14:20:03 -07:00
Linus Torvalds
eda054770e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11 14:15:44 -07:00
David S. Miller
62522d36d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-06-11 13:32:31 -07:00
Jonas Bonn
a71fba9729 ethoc: use devres resource management
The point of using the devres resource management routines is that they
simplify the driver by taking care of releasing resources on failure and
release.  A recent commit added a bunch of error handling that is unnecessary
in this context.

This patch removes this redundant error handling, as well as using
dmam_alloc_coherent in place of dma_alloc_coherent in order to use this
framework consistenly throughout the driver.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:37 -07:00
Jonas Bonn
b46773db64 ethoc: Clear command buffer after write
This matches what ethoc_mdio_read does and makes the functions
symmetric.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:36 -07:00
Jonas Bonn
2cbc8ef9fa Remove unused variable
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:36 -07:00
Jonas Bonn
637f33b80d ethoc: Clean up PHY probing
- No need to iterate over all possible addresses on bus
- Use helper function phy_find_first
- Use phy_connect_direct as we already have the relevant structure

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:35 -07:00
Jonas Bonn
ee4f56b990 ethoc: write number of TX buffers in init_ring
This moves the write of the TX_BD_NUM to init_ring together with the
rest of the code setting up the transmission buffers.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:35 -07:00
Jonas Bonn
f8555ad0cf ethoc: Write bus addresses to registers
The ethoc driver should be writing bus addresses to the ethoc registers, not
virtual addresses.  This patch adds an array to store the virtual addresses
in and references that array when manipulating the contents of the buffer
descriptors.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:34 -07:00
Jonas Bonn
c527f81475 ethoc: calculate number of buffers in ethoc_probe
This moves the calculation of the number of transmission buffers to
ethoc_probe where it more logically fits with the rest of the memory
allocation code.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 13:28:34 -07:00
Jiri Slaby
a7ef7d1f5e PCI: hotplug/cpqphp, fix NULL dereference
There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.

Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...

The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
	Subsystem: Compaq Computer Corporation Device [0e11:a2f8]

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:10:21 -07:00
Jesse Barnes
3be434f024 Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
This reverts commit 75568f8094.

Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.

Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:08:37 -07:00
Bjorn Helgaas
f6d440daeb PCI: change resource collision messages from KERN_ERR to KERN_INFO
We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:08:14 -07:00
David S. Miller
e79aa86710 Merge branch 'wimax-2.6.35.y' of git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax 2010-06-11 12:38:23 -07:00
Inaky Perez-Gonzalez
a385a53e65 wimax/i2400m: fix missing endian correction read in fw loader
i2400m_fw_hdr_check() was accessing hardware field
bcf_hdr->module_type (little endian 32) without converting to host
byte sex.

Reported-by: Данилин Михаил <mdanilin@nsg.net.ru>

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2010-06-11 11:51:20 -07:00
David S. Miller
14599f1e34 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Conflicts:
	drivers/net/wireless/wl12xx/wl1271.h
	drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-11 11:34:06 -07:00
Linus Torvalds
f1f6ea3522 Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid validate_cis failure on CIS override
  pcmcia: dev_node removal bugfix
  pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TI
  pcmcia: only keep saved I365_CSCINT flag if there is no PCI irq
2010-06-11 09:55:21 -07:00
Matthieu CASTET
095751a6e0 UBI: generate random image_seq when formatting MTD devices
Generate random image_seq when attaching empty MTD device (kernel do the
ubi formating).

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-11 17:23:37 +03:00
Artem Bityutskiy
1a49af2ca0 UBI: improve ECC error message
ECC errors are quite typical errors on NAND, so it is worth improving
the UBI message and print something like

ubi_io_read: error -74 (ECC error) while reading 4096 bytes from PEB 1:4 ...

rather than

ubi_io_read: error -74 while reading 4096 bytes from PEB 1:4 ...

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-11 17:23:37 +03:00
Changli Gao
d8d1f30b95 net-next: remove useless union keyword
remove useless union keyword in rtable, rt6_info and dn_route.

Since there is only one member in a union, the union keyword isn't useful.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 23:31:35 -07:00
Figo.zhang
349124a007 net8139: fix a race at the end of NAPI
fix a race at the end of NAPI complete processing, it had
better do __napi_complete() first before re-enable interrupt.

Signed-off-by:Figo.zhang <figo1802@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 23:14:08 -07:00
Catalin Marinas
1082345290 sata_sil24: Use memory barriers before issuing commands
The data in the cmd_block buffers may reach the main memory after the
writel() to the device ports. This patch introduces two calls to wmb()
to ensure the relative ordering.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Colin Tuckley <colin.tuckley@arm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-10 16:06:48 -04:00
Dan Carpenter
14e45c15e1 sata_sil24: memset() overflow
cb->atapi.cdb is an array of 16 u8 elements.  The call too memset()
would set the first part of the sge array to zero as well.  It's not
a packed struct.

This one has been around for five years.  I found it with Smatch.  I
think the reason no one has seen it before is because we normally call
sil24_fill_sg() and that overwrites sge with proper information?

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-10 16:06:33 -04:00
Luotao Fu
fb76dd10b9 Input: matrix_keypad - add support for clustered irq
This one adds support of a combined irq source for the whole matrix keypad.
This can be useful if all rows and columns of the keypad are e.g. connected
to a GPIO expander, which only has one interrupt line for all events on
every single GPIO.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-10 12:33:59 -07:00
Zhang Rui
4b1b29bc88 ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
Disable Vista compatibility for Sony VGN-NS50B_L.
https://bugzilla.kernel.org/show_bug.cgi?id=12904#c46

Note that this change is a workaround, not a permanent fix.
For the permanent fix is to figure out what compatibility
means and to actually be compatible...

Tested-by: Voldemar <harestomper@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10 11:31:03 -04:00
Liang Li
934231de70 ACPI: fan: fix unbalanced code block
The code block braced with CONFIG_ACPI_PROCFS is unblanced. When
CONFIG_ACPI_PROCFS=n, kernel trace will be produced like:

Call Trace:
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b02c>] warn_slowpath_common+0x6c/0xc0
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30
 [<c111637d>] remove_proc_entry+0x20d/0x290
 [<c1116bd7>] ? proc_register+0x117/0x1f0
 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50
 [<c14f483c>] ? acpi_fan_init+0x0/0x2c
 [<c14f485f>] acpi_fan_init+0x23/0x2c
 [<c1001123>] do_one_initcall+0x23/0x180
 [<c107dcf7>] ? init_irq_proc+0x67/0x80
 [<c14d43bd>] kernel_init+0x13c/0x20e
 [<c1030e50>] ? schedule_tail+0x20/0x90
 [<c1389e06>] ? syscall_exit+0x5/0x16
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c10032f6>] kernel_thread_helper+0x6/0x30
---[ end trace a7919e7f17c0a725 ]---

Then also bracket later error checking code with ACPI_PROCFS
option to avoid mismatch problem.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10 11:24:51 -04:00
Matthew Garrett
2a6b69765a ACPI: Store NVS state even when entering suspend to RAM
https://bugzilla.kernel.org/show_bug.cgi?id=13931 describes a bug where
a system fails to successfully resume after the second suspend. Maxim
Levitsky discovered that this could be rectified by forcibly saving
and restoring the ACPI non-volatile state. The spec indicates that this
is only required for S4, but testing the behaviour of Windows by adding
an ACPI NVS region to qemu's e820 map and registering a custom memory
read/write handler reveals that it's saved and restored even over suspend
to RAM. We should mimic that behaviour to avoid other broken platforms.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10 11:03:15 -04:00
Matthew Garrett
dd4c4f17d7 suspend: Move NVS save/restore code to generic suspend functionality
Saving platform non-volatile state may be required for suspend to RAM as
well as hibernation. Move it to more generic code.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-10 11:02:34 -04:00
Clemens Ladisch
c374ab4242 firewire: core: always enable cycle master packets
As part of the bus manager responsibilities, make sure that the cycle
master sends cycle start packets.  This is needed when the old bus
manager disabled the cycle master's cmstr bit and there are iso-capable
nodes on the new bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:41:51 +02:00
Clemens Ladisch
e91b2787d0 firewire: allocate broadcast channel in hardware
On OHCI 1.1 controllers, let the hardware allocate the broadcast channel
automatically.  This removes a theoretical race condition directly after
a bus reset where it could be possible to read the channel allocation
register with channel 31 still being unallocated.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:40:49 +02:00
Clemens Ladisch
7e0e314f19 firewire: core: add CSR abdicate support
Implement the abdicate bit, which is required for bus manager
capable nodes and tested by the Base 1394 Test Suite.

Finally, something to do at a command reset!  :-)

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:37:15 +02:00
Clemens Ladisch
4ffb7a6a06 firewire: add CSR cmstr support
Implement the cmstr bit, which is required for cycle master capable
nodes and tested for by the Base 1394 Test Suite.

This bit allows the bus master to disable cycle start packets; there are
bus master implementations that actually do this.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:36:37 +02:00
Clemens Ladisch
3d1f46eb60 firewire: core: add CSR MAINT_UTILITY support
Implement the MAIN_UTILITY register, which is utterly optional
but useful as a safe target for diagnostic read/write/broadcast
transactions.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:35:37 +02:00
Clemens Ladisch
a1a1132bd8 firewire: add CSR PRIORITY_BUDGET support
If supported by the OHCI controller, implement the PRIORITY_BUDGET
register, which is required for nodes that can use asynchronous
priority arbitration.

To allow the core to determine what features the lowlevel device
supports, add a new card driver callback.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2010-06-10 08:35:06 +02:00