The define MAX_PACKET_BUFF_SIZE and STATUS_MSG_LEN is not used in the driver.
Delete two defines.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SendRawpacket is declared but not implemented. It is not used also.
So just delete it.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable g_num_total_switches is never used so just remove it.
gastrWIDs is also not used because g_num_total_switches is deleted.
Remove gastrWIDs also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gstrConfigPktInfo, SemHandleSendPkt and SemHandlePktResp are never used in
the drivers. So just delete the variables and it's related code.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function NetworkInfoReceived, GnrlAsyncInfoReceived and
host_int_ScanCompleteReceived are declared in the header file already.
Just removes the declaration and comments.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wilc1000 driver does not support five Ghz band. Remove FIVE_GHZ_BAND and
it's related code.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The define PHY_802_11n is useless because wilc1000 support 802.11n as always.
Remove PHY_802_11n and it related code.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes one of the platform dependencies, PANDA_BOARD from the
driver codes. The device tree will provide the platform dependencies in
the future commits.
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First series of fixes for v4.3-rc cycle. The major points are
a fix to a regression which would let gadget driver disable
an endpoint that's already disabled and a fix to MUSB to make
sure IRQs are masked when we're going to suspend and unmasked
on resume.
Signed-off-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TQho
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.3-rc2
First series of fixes for v4.3-rc cycle. The major points are
a fix to a regression which would let gadget driver disable
an endpoint that's already disabled and a fix to MUSB to make
sure IRQs are masked when we're going to suspend and unmasked
on resume.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Use netdev_* family of macros when there is reference to a network
device. dev->name is removed as netdev_info will print the device
name
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixes sparse error:
drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c:149:6: error:
symbol 'lbug_with_loc'redeclared with different type (originally declared at
drivers/staging/lustre/lustre/libcfs/linux/../../../include/linux/libcfs/libcfs_private.h:82)
- different modifiers
Use the __noreturn macro instead of __attribute__((noreturn))
The macro is exactly that but its usage seems more common and
it is bit more readable.
Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed a space to fix the following coding style warning detected by
checkpatch:
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take initial stab at removing server-disk related defines that
client does not need.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These could only happen on the server, so they make no sense
on the client.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the client can never be server, this is all dead code.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we no longer track allocated memory, remove
obd_memory statistics counter and all references to it everywhere
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lustre memory allocation framework has a feature to track amount
of allocated memory, but since it's not being used consistently anymore
and is on the way out in general, just remove it.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lustre memory allocation wrappers also included a fault injection
framework that's totally redundant, since in-kernel offering is
actually superior to what we had.
So let's remove it.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UTILS are userland and I see it's causing confusion
with things beging already converted to kmalloc,
so just remove it.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OBD_ALLOC_LARGE is now replaced with libcfs_kvzalloc and
OBD_FREE_LARGE is now replaced with kvfree.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Part of effort of getting rid of custom Lustre alloc/free macros
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Part of effort of getting rid of custom Lustre allocation macros
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Part of effort to get rid of custom Lustre allocation macros.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since everything is now supposed to use regular kernel alloc and
free functions.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The remaining users in ll_open_cleanup and obd_mod_alloc
are converted to regular kzalloc/kfree.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are converted to regular kzalloc/kfree calls.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OBD_CPT_ALLOC and friends are no longer used, so remove them.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros are not used anymore, so let's remove them,
also __OBD_VMALLOC_VEROBSE and OBD_CPT_VMALLOC
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove OBD_CPT_ALLOC_LARGE define and convert the only user to
libcfs_kvzalloc_cpt.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
memset() uses instruction dcbz to speed up clearing by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memset(). Allthough no part of the code
explicitly uses memset(), GCC may make calls to it.
This patch modifies memset() such that at startup, memset()
unconditionally skip the optimised bloc that uses dcbz instruction.
Once the initial MMU is set up, in machine_init() we patch memset()
by replacing this inconditional jump by a NOP
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
memcpy() uses instruction dcbz to speed up copy by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memcpy(). Allthough no part of the code
explicitly uses memcpy(), GCC makes calls to it.
This patch modifies memcpy() such that at startup, memcpy()
unconditionally jumps to generic_memcpy() which doesn't use
the dcbz instruction.
Once the initial MMU is set up, in machine_init() we patch memcpy()
by replacing this inconditional jump by a NOP
Reported-by: Michal Sojka <sojkam1@fel.cvut.cz>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The VBUS line of USB2 is connected to VBUS detect logic on
the PMIC. Use the palmas-usb driver to report VBUS events
to the USB driver.
As the palmas-usb driver supports GPIO based ID reporting
provide the GPIO for ID pin as well.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables tca6424a GPIO expander driver that in turn enables
TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm.
In other words, it makes HDMI work on OMAP5 uevm.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.
Fixes: 9be495c426 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add omap2_clk_enable_autoidle_all to am43xx_init_late otherwise the call
to omap2_clk_disable_autoidle_all in am43xx_init_early may cause some
clocks to always stay active and prevent low power mode transitions.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Originally, all the SoC PHY rails were supplied by LDO3. However, as a
result of characterization, it was determined that this posed a risk in
extreme load conditions. Hence the PHY rails are split between two
different LDOs. Update the related node as a result
LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3
LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie
NOTE: We break compatibility with pre-production boards with this change
since, the PMIC LDO4 is disabled at OTP level.
The new configuration is the plan of record and all pre-production
boards are supposed to be replaced with the latest boards matching the
mentioned configuration.
Some very few 10 something boards have been created and
stopped production till the latest modifications were done (PMIC USB
interrupt, LDO4 etc) - and all of those boards are now getting
scrapped.. If there are any (as per tracking information, there should
not be any), TI should be contacted to have them replaced.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated commit about these being TI internal protos]
Signed-off-by: Tony Lindgren <tony@atomide.com>
In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to
using patch_text() to set breakpoints so that we could handle the case
when we had CONFIG_DEBUG_RODATA. That patch used patch_text().
Unfortunately, patch_text() assumes that we're not in atomic context
when it runs since it needs to grab a mutex and also wait for other
CPUs to stop (which it does with a completion).
This would result in a stack crawl if you had
CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The
crawl looked something like:
BUG: scheduling while atomic: swapper/0/0/0x00010007
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073
Hardware name: Rockchip (Device Tree)
(unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24)
(show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8)
(dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c)
(__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668)
(__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4)
(schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234)
(schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188)
(wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24)
(wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70)
(__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54)
(stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8)
(__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44)
(stop_machine) from [<c00173e8>] (patch_text+0x28/0x34)
(patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c)
(kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60)
(kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc)
(dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4)
(gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c)
(kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0)
(kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c)
(kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c)
(do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34)
It turns out that when we're in kgdb all the CPUs are stopped anyway
so there's no reason we should be calling patch_text(). We can
instead directly call __patch_text() which assumes that CPUs have
already been stopped.
Fixes: 23a4e4050b ("arm: kgdb: Handle read-only text / modules")
Reported-by: Aapo Vienamo <avienamo@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 96231b2686: ("ARM: 8419/1: dma-mapping: harmonize definition
of DMA_ERROR_CODE") changed the definition of DMA_ERROR_CODE to use
dma_addr_t, which makes the compiler barf on assigning this to an
"int" variable on ARM with LPAE enabled:
*************
In file included from /src/linux/include/linux/dma-mapping.h:86:0,
from /src/linux/arch/arm/mm/dma-mapping.c:21:
/src/linux/arch/arm/mm/dma-mapping.c: In function '__iommu_create_mapping':
/src/linux/arch/arm/include/asm/dma-mapping.h:16:24: warning:
overflow in implicit constant conversion [-Woverflow]
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
^
/src/linux/arch/arm/mm/dma-mapping.c:1252:15: note: in expansion of
macro DMA_ERROR_CODE'
int i, ret = DMA_ERROR_CODE;
^
*************
Remove the actually unneeded initialization of "ret" in
__iommu_create_mapping() and move the variable declaration inside the
for-loop to make the scope of this variable more clear.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Remove the #if statement which caused trouble for kernels that support
both ARMv6 and ARMv7. Older architectures do not implement these bits,
so it should be safe to always clear them.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If a mux clock is initialised (by hardware or firmware) with an
invalid parent, its ->get_parent() can return an out of range
index. For example, the generic mux clock attempts to return
-EINVAL, which due to the u8 return type ends up a rather large
number. Using this index with the parent_names[] array results
in an invalid pointer and (usually) a crash in the following
strcmp().
This patch adds a check for the parent index being in range,
ignoring clocks reporting invalid values.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Tested-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The OPP list needs to be protected against concurrent accesses. Using
simple RCU read locks does the trick and gets rid of the following
lockdep warning:
===============================
[ INFO: suspicious RCU usage. ]
4.2.0-next-20150908 #1 Not tainted
-------------------------------
drivers/base/power/opp.c:460 Missing rcu_read_lock() or dev_opp_list_lock protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
4 locks held by kworker/u8:0/6:
#0: ("%s""deferwq"){++++.+}, at: [<c0040d8c>] process_one_work+0x118/0x4bc
#1: (deferred_probe_work){+.+.+.}, at: [<c0040d8c>] process_one_work+0x118/0x4bc
#2: (&dev->mutex){......}, at: [<c03b8194>] __device_attach+0x20/0x118
#3: (prepare_lock){+.+...}, at: [<c054bc08>] clk_prepare_lock+0x10/0xf8
stack backtrace:
CPU: 2 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.0-next-20150908 #1
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: deferwq deferred_probe_work_func
[<c001802c>] (unwind_backtrace) from [<c00135a4>] (show_stack+0x10/0x14)
[<c00135a4>] (show_stack) from [<c02a8418>] (dump_stack+0x94/0xd4)
[<c02a8418>] (dump_stack) from [<c03c6f6c>] (dev_pm_opp_find_freq_ceil+0x108/0x114)
[<c03c6f6c>] (dev_pm_opp_find_freq_ceil) from [<c0551a3c>] (dfll_calculate_rate_request+0xb8/0x170)
[<c0551a3c>] (dfll_calculate_rate_request) from [<c0551b10>] (dfll_clk_round_rate+0x1c/0x2c)
[<c0551b10>] (dfll_clk_round_rate) from [<c054de2c>] (clk_calc_new_rates+0x1b8/0x228)
[<c054de2c>] (clk_calc_new_rates) from [<c054e44c>] (clk_core_set_rate_nolock+0x44/0xac)
[<c054e44c>] (clk_core_set_rate_nolock) from [<c054e4d8>] (clk_set_rate+0x24/0x34)
[<c054e4d8>] (clk_set_rate) from [<c0512460>] (tegra124_cpufreq_probe+0x120/0x230)
[<c0512460>] (tegra124_cpufreq_probe) from [<c03b9cbc>] (platform_drv_probe+0x44/0xac)
[<c03b9cbc>] (platform_drv_probe) from [<c03b84c8>] (driver_probe_device+0x218/0x304)
[<c03b84c8>] (driver_probe_device) from [<c03b69b0>] (bus_for_each_drv+0x60/0x94)
[<c03b69b0>] (bus_for_each_drv) from [<c03b8228>] (__device_attach+0xb4/0x118)
ata1: SATA link down (SStatus 0 SControl 300)
[<c03b8228>] (__device_attach) from [<c03b77c8>] (bus_probe_device+0x88/0x90)
[<c03b77c8>] (bus_probe_device) from [<c03b7be8>] (deferred_probe_work_func+0x58/0x8c)
[<c03b7be8>] (deferred_probe_work_func) from [<c0040dfc>] (process_one_work+0x188/0x4bc)
[<c0040dfc>] (process_one_work) from [<c004117c>] (worker_thread+0x4c/0x4f4)
[<c004117c>] (worker_thread) from [<c0047230>] (kthread+0xe4/0xf8)
[<c0047230>] (kthread) from [<c000f7d0>] (ret_from_fork+0x14/0x24)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes: c4fe70ada4 ("clk: tegra: Add closed loop support for the DFLL")
[vince.h@nvidia.com: Unlock rcu on error path]
Signed-off-by: Vince Hsu <vince.h@nvidia.com>
[sboyd@codeaurora.org: Dropped second hunk that nested the rcu
read lock unnecessarily]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add missing zero to value. This will be needed when range checking
is implemented.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous fix of pxa library support, which was introduced to fix the
library dependency, broke the previous SoC behavior, where a machine
code binding pxa2xx-ac97 with a coded relied on :
- sound/soc/pxa/pxa2xx-ac97.c
- sound/soc/codecs/XXX.c
For example, the mioa701_wm9713.c machine code is currently broken. The
"select ARM" statement wrongly selects the soc/arm/pxa2xx-ac97 for
compilation, as per an unfortunate fate SND_PXA2XX_AC97 is both declared
in sound/arm/Kconfig and sound/soc/pxa/Kconfig.
Fix this by ensuring that SND_PXA2XX_SOC correctly triggers the correct
pxa2xx-ac97 compilation.
Fixes: 846172dfe3 ("ASoC: fix SND_PXA2XX_LIB Kconfig warning")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit adcbcfea15 ("spi: mediatek: fix spi clock usage error")
added a new sel_clk but introduced bugs in the error paths since
the wrong struct clk pointers are passed to PTR_ERR().
Fixes: adcbcfea15 ("spi: mediatek: fix spi clock usage error")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following 'make htmldocs' warnings:
.//include/linux/spi/spi.h:71: warning: No description found for parameter 'lock'
.//include/linux/spi/spi.h:71: warning: Excess struct/union/enum/typedef member 'clock' description in 'spi_statistics'
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_data_get_chip() function does not exist, call irq_desc_get_chip()
instead.
Fixes: 9ec97561aa ("ARM/pxa: Prepare balloon3_irq_handler for irq argument removal")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
