Alex Elder says:
====================
net: ipa: GSI channel flow control
Starting with IPA v4.2, endpoint DELAY mode (which prevents data
transfer on TX endpoints) does not work properly. To address this,
changes were made to allow underlying GSI channels to be put into
a "flow controlled" state, which achieves a similar objective.
The first patch in this series implements the flow controlled
channel state and the commands used to control it. It arranges
to use the new mechanism--instead of DELAY mode--for IPA v4.2+.
In IPA v4.11, the notion of GSI channel flow control was enhanced,
and implemented in a slightly different way. For the most part this
doesn't affect the way the IPA driver uses flow control, but the
second patch adds support for the newer mechanism.
====================
Link: https://lore.kernel.org/r/20211124194416.707007-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA v4.2 introduced GSI channel flow control, used instead of IPA
endpoint DELAY mode to prevent a TX channel from injecting packets
into the IPA core. It used a new FLOW_CONTROLLED channel state
which could be entered using GSI generic commands.
IPA v4.11 extended the channel flow control model. Rather than
having a distinct FLOW_CONTROLLED channel state, each channel has a
"flow control" property that can be enabled or not--independent of
the channel state. The AP (or modem) can modify this property using
the same GSI generic commands as before.
The AP only uses channel flow control on modem TX channels, and only
when recovering from a modem crash. The AP has no way to discover
the state of a modem channel, so the fact that (starting with IPA
v4.11) flow control no longer uses a distinct channel state is
invisible to the AP. So enhanced flow control generally does not
change the way AP uses flow control.
There are a few small differences, however:
- There is a notion of "primary" or "secondary" flow control, and
when enabling or disabling flow control that must be specified
in a new field in the GSI generic command register. For now, we
always specify 0 (meaning "primary").
- When disabling flow control, it's possible a request will need
to be retried. We retry up to 5 times in this case.
- Another new generic command allows the current flow control
state to be queried. We do not use this.
Other than the need for retries, the code essentially works the same
way as before.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One quirk for certain versions of IPA is that endpoint DELAY mode
does not work properly. IPA DELAY mode prevents any packets from
being delivered to the IPA core for processing on a TX endpoint.
The AP uses DELAY mode when the modem crashes, to prevent modem TX
endpoints from generating traffic during crash recovery. Without
this, there is a chance the hardware will stall during recovery from
a modem crash.
To achieve a similar effect, a GSI FLOW_CONTROLLED channel state
was created. A STARTED TX channel can be placed in FLOW_CONTROLLED
state, which prevents the transfer of any more packets. A channel
in FLOW_CONTROLLED state can be either returned to STARTED state, or
can be transitioned to STOPPED state.
Because this operates on GSI channels, two generic commands were
added to allow the AP to control this state for modem channels
(similar to the ALLOCATE and HALT channel commands).
Previously the code assumed this quirk only applied to IPA v4.2.
In fact, channel flow control (rather than endpoint DELAY mode)
should be used for all versions *starting* with IPA v4.2.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Kerr says:
====================
mctp serial minor fixes
We had a few minor fixes queued for a v4 of the original series, so
they're sent here as separate changes.
v2:
- fix ordering of cancel_work vs. unregister_netdev.
====================
Link: https://lore.kernel.org/r/20211125060739.3023442-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri assures me that a ldisc->open with tty->disc_data set should never
happen, so this check doesn't do anything.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current serial driver requires a maximum MTU of 68, and it doesn't
make sense to set a MTU below the MCTP-required baseline (of 68) either.
This change sets the min_mtu & max_mtu of the mctp netdev, essentially
disallowing changes. By using these instead of a ndo_change_mtu op, we
get the netlink extacks reported too.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to ensure that the tx work has finished before returning from
the ldisc close op, so do a synchronous cancel.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: small collected improvements
This series contains a somewhat unrelated set of changes, some
inspired by some recent work posted for back-port. For the most
part they're meant to improve the code without changing it's
functionality. Each basically stands on its own.
====================
Link: https://lore.kernel.org/r/20211124202511.862588-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dummy net_device is a large field in the GSI structure, but it
is not at all interesting from the perspective of debugging. Move
it to the end of the GSI structure so the other fields are easier to
find in memory.
The channel and event ring arrays are also very large, so move them
near the end of the structure as well.
Swap the position of the result and completion fields to improve
structure packing.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A mutex ensures we never submit more than one GSI command of any
kind at once. This means the per-channel and per-event ring
completion structures provide no benefit. Instead, just use the
single (existing) GSI completion to signal the completion of GSI
commands of all types.
This makes gsi_evt_ring_init() a trivial function with no inverse,
so open-code it in its sole caller and get rid of the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ipa_endpoint_skb_copy(), a new socket buffer structure is
allocated so that some data can be copied into it. However, after
doing this, if the endpoint has a null netdev pointer, we just drop
free the socket buffer.
Instead, check endpoint->netdev pointer first, and just return early
if it's null. Also return early if the SKB allocation fails, to
avoid the deeper indentation in the normal path.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During setup, ipa_endpoint_program() programs each endpoint with
various configuration parameters. One of those registers defines
whether to drop packets when a head-of-line blocking condition is
detected on an RX endpoint. We currently assume this is disabled;
instead, explicitly set it to be disabled.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The head-of-line block (HOLB) drop timer is only meaningful when
dropping packets due to blocking is enabled. Given that, redefine
the interface so the timer is specified when enabling HOLB drop, and
use a different function when disabling.
To enable and disable HOLB drop, these functions will now be used:
ipa_endpoint_init_hol_block_enable(endpoint, milliseconds)
ipa_endpoint_init_hol_block_disable(endpoint)
The existing ipa_endpoint_init_hol_block_enable() becomes a helper
function, renamed ipa_endpoint_init_hol_block_en(), and used with
ipa_endpoint_init_hol_block_timer() to enable HOLB block on an
endpoint.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all filter table entries are used. Only certain endpoints
support filtering, and the table begins with a bitmap indicating
which endpoints use the "slots" that follow for filter rules.
Currently, unused filter table entries are not initialized.
Instead, zero-fill the entire unused portion of the filter table
memory regions, to make it more obvious that memory is unused (and
not subsequently modified).
This is not strictly necessary, but the result is reassuring when
looking at filter table memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit made disabling the SMP2P "setup ready" interrupt
unrelated to ipa_modem_stop(). Given that, it seems fitting to get
rid of ipa_modem_init() and ipa_modem_exit() (which are trivial
wrapper functions), and call ipa_smp2p_init() and ipa_smp2p_exit()
directly instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).
The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.
There are two cases that need special attention.
The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.
The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.
Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.
Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only called takes ocelot_port->bridge and passes it as the "bridge"
argument to this function, which then compares it with
ocelot_port->bridge. This is not useful.
Instead, we would like this function to return 0 if ocelot_port->bridge
is not present, which is what this patch does.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tls: splice_read fixes
As I work my way to unlocked and zero-copy TLS Rx the obvious bugs
in the splice_read implementation get harder and harder to ignore.
This is to say the fixes here are discovered by code inspection,
I'm not aware of anyone actually using splice_read.
====================
Link: https://lore.kernel.org/r/20211124232557.2039757-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous patch fixes overriding callbacks incorrectly. Triggering
the crash in sendpage_locked would be more spectacular but it's
hard to get to, so take the easier path of proving this is broken
and call getname. We're currently getting IPv4 socket info on an
IPv6 socket.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.
Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).
Use a callback building method similar to what we do for struct proto.
Fixes: c46234ebb4 ("tls: RX path for ktls")
Fixes: d4ffb02dee ("net/tls: enable sk_msg redirect to tls socket egress")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recvmsg() will put peek()ed and partially read records onto the rx_list.
splice_read() needs to consult that list otherwise it may miss data.
Align with recvmsg() and also put partially-read records onto rx_list.
tls_sw_advance_skb() is pretty pointless now and will be removed in
net-next.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.
Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.
Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.
Fixes: fedf201e12 ("net: tls: Refactor control message handling on recv")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When XDP program is loaded, it is desirable that the previous TX and RX
coalesce values are not re-inited to its default value. This prevents
unnecessary re-configurig the coalesce values that were working fine
before.
Fixes: ac746c8520 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211124114019.3949125-1-boon.leong.ong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The node pointer is returned by of_get_child_by_name() with
refcount incremented in tsnep_mdio_init(). Calling of_node_put()
to aovid the refcount leak in tsnep_mdio_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211124084048.175456-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
More missed changes, the response back to another system sending a
command that had no user to handle it wasn't formatted properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A couple of issues:
The tested data sizes are wrong; during the design that changed and this
got missed.
The formatting of the reponse couldn't use the normal one, it has to be
an IPMB formatted response.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 059747c245 ("ipmi: Add support for IPMB direct messages")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Populate the supported interfaces bitmap and MAC capabilities mask for
the macb driver and remove the old validate implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems only XID 609 made it to the mass market. Therefore let's
disable detection of the other RTL8125a XID's. If nobody complains
we can remove support for RTL_GIGA_MAC_VER_60 later.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/2cd3df01-5f8b-08dd-6def-3f31a3014bde@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYZ9i1AAKCRDj7w1vZxhR
xXHHAQDvEFEECNh1xBH7/b2VFrWnJjN+b+WF2Kxu8GGs3xhtlwEAv/mx8IrXZe9y
8W5v3QzIBveZjkp0rORkbe8rpPNGGwE=
=daCZ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-11-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One removal fix for hyperv, one fix in aspeed for the vga_pw sysfs file
content, one error-checking fix for vc4 and two fixes for nouveau, one
to support a new device and another one to properly check for errors.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211125101819.ynu7zgbs7yfwedri@houat
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Similar to previous patch, just copy over necessary struct into local
stack variable before checking its fields.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-14-andrii@kernel.org
Buf can be not zero-terminated leading to strstr() to access data beyond
the intended buf[] array. Fix by forcing zero termination.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-12-andrii@kernel.org
Perfbuf doesn't guarantee 8-byte alignment of the data like BPF ringbuf
does, so struct get_stack_trace_t can arrive not properly aligned for
subsequent u64 accesses. Easiest fix is to just copy data locally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-10-andrii@kernel.org
Prevent sanitizer from complaining about passing NULL into memcpy(),
even if it happens with zero size.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-9-andrii@kernel.org
Test is using __int128 variable as unsigned and highest order bit can be
set to 1 after bit shift. Use unsigned __int128 explicitly and prevent
UBSan from complaining.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-8-andrii@kernel.org
add_dst_sec() can invalidate bpf_linker's section index making
dst_symtab pointer pointing into unallocated memory. Reinitialize
dst_symtab pointer on each iteration to make sure it's always valid.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211124002325.1737739-7-andrii@kernel.org