To compute the rtx timeout schedule_3rdack_retransmission() does multiple
things in the wrong way: srtt_us is measured in usec/8 and the timeout
itself is an absolute value.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dedicated variable for index in the loop in the
iio_buffers_alloc_sysfs_and_mask(). This will make code cleaner and
less error prone as proved by previous changes done in this function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211013094923.2473-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Mat Martineau says:
====================
mptcp: More socket option support
These patches add MPTCP socket support for a few additional socket
options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and
IPV6_TRANSPARENT.
Patch 1 exposes __ip_sock_set_tos() for use in patch 2.
Patch 2 adds IP_TOS support.
Patches 3 and 4 add the freebind and transparent support, with a
selftest for the latter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
No hard dependencies here, just skip if test environ lacks
nft binary or the needed kernel config options.
The test case spawns listener in ns2 but ns1 will connect
to the ip address of ns4.
policy routing + tproxy rule will redirect packets to ns2 instead
of forward.
v3: - update mptcp/config (Mat Martineau)
- more verbose SKIP messages in mptcp_connect.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOL_IP provides a way to configure network layer attributes in a
socket. This patch adds support for IP_TOS for setsockopt(.. ,SOL_IP, ..)
Support for SOL_IP is added in mptcp_setsockopt() and IP_TOS is handled in
a private function. The idea here is to take in the value passed for IP_TOS
and set it to the current subflow, open subflows as well new subflows that
might be created after the initial call to setsockopt(). This sync is done
using sync_socket_options(.., ssk) and setting the value of tos using
__ip_sock_set_tos(ssk,..).
The patch has been tested using the packetdrill script here -
https://github.com/multipath-tcp/mptcp_net-next/issues/220#issuecomment-947863717
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/220
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Making the static function __ip_sock_set_tos() from net/ipv4/ip_sockglue.c
accessible by declaring it in include/net/ip.h
The reason for doing this is to use this function to set IP_TOS value in
mptcp_setsockopt() without the lock.
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the remaining exynos clock drivers to use
samsung_clk_register_cpu() or if possible use samsung_cmu_register_one().
With this we can now make exynos_register_cpu_clock() a static function
so that future CPU clock registration changes will use the samsung common
clock driver.
The main benefit of this change is that it standardizes the CPU clock
registration for the samsung clock drivers.
Link: https://lore.kernel.org/r/20211015190515.3760577-1-willmcvicker@google.com
Signed-off-by: Will McVicker <willmcvicker@google.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
[snawrocki@kernel.org: Fixed build break in clk-exynos4.c, clk-exynos5250.c]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Jakub Kicinski says:
====================
net: constify netdev->dev_addr
Take care of a few stragglers and make netdev->dev_addr const.
netdev->dev_addr can be held on the address tree like any other
address now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since all netdev->dev_addr modifications go via dev_addr_mod()
we can put it on the list. When address is change remove it
and add it back.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev->dev_addr should only be modified via helpers,
but someone may be casting off the const. Add a runtime
check to catch abuses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no module callers in-tree and it's hard to justify
why anyone would init or flush addresses of a netdev (note
the flush is more of a destructor, it frees netdev->dev_addr).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. We converted all users to make modifications via appropriate
helpers, make netdev->dev_addr const.
The update helpers need to upcast from the buffer to
struct netdev_hw_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
bnx2x_vfpf_config_mac() was constified by not its stub.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-19
This series contains updates to iavf driver only.
Nitesh prevents user from changing interrupt settings when adaptive
interrupt moderation is on.
Jedrzej resolves a hang that occurred when interface was closed while a
reset was occurring and fixes statistics to be updated when requested to
prevent stale values.
Brett adjusts driver to accommodate changes in supported VLAN features
that could occur during reset and cause various errors to be reported.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous fix for more comprehensive runtime PM calls turned out to
be not good as hoped; a few calls including pm_runtime_enable() and
pm_runtime_disable() are rather utterly superfluous for PCI devices,
even triggering a kernel error message. Better to drop those calls.
Note that the problem we wanted to solve with that commit seems
irrelevant with the fix itself; the original bug (a GPF at
azx_remove()) was likely a regression by the recent PCI core cleanup,
and the buggy PCI change has been already reverted. So basically we
were scratching a wrong surface. OTOH, making the runtime PM calls
symmetric for both probe and remove is more consistent, and maybe
that's a sensible outcome.
Fixes: 4f66a9ef37 ("ALSA: hda: intel: More comprehensive PM runtime setup for controller driver")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d9d76980-966a-e031-70d1-3254ba5be5eb@gmail.com
Link: https://lore.kernel.org/r/20211119162730.24423-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
We previously added support for other Intel platforms but missed
JasperLake.
BugLink: https://github.com/thesofproject/linux/issues/3210
Fixes: 9d36ceab94 ('ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027023254.24955-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comment is not kernel-doc one and starts with /**, so fix that.
drivers/phy/ti/phy-tusb1210.c:16: warning: expecting prototype for tusb1210.c(). Prototype was for TUSB1210_VENDOR_SPECIFIC2() instead
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20211116103951.34482-6-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The comment is not kernel-doc one and starts with /**, so fix that.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:3: warning:
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211116103951.34482-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dp-* members were added to qmp_phy_combo_cfg but documentation was
missed, so add that.
drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_aux_cfg' not described in 'qmp_phy'
drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_opts' not described in 'qmp_phy'
drivers/phy/qualcomm/phy-qcom-qmp.c:2995: warning: Function parameter or member 'dp_clks' not described in 'qmp_phy'
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211116103951.34482-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the format and add description for ops to fix the below warnings:
drivers/phy/marvell/phy-mvebu-cp110-utmi.c:94: warning: Function parameter or member 'syscon' not described in 'mvebu_cp110_utmi'
drivers/phy/marvell/phy-mvebu-cp110-utmi.c:94: warning: Function parameter or member 'ops' not described in 'mvebu_cp110_utmi'
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211116103951.34482-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the TI DP83561-SP Gigabit ethernet phy device.
The dp83561-sp is a radiation hardened space grade gigabit ethernet
PHY. It has been tested for single event latch upto 121 MeV, the
critical reliability parameter for space designs. It interfaces directly to
twisted pair media through an external transformer. And the device also
interfaces directly to the MAC layer through Reduced GMII (RGMII) and MII.
DP83867, DP83869 and DP83561-SP, all these parts support 1000Base-T/
100Base-TX/ and 10Base-Te standards and have similar register map for
the core functionality.
The data sheet for this part is at https://www.ti.com/product/DP83561-SP
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Geet Modi <geet.modi@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211118102532.9835-1-hnagalla@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Static variables do not need to be initialized to 0.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following coccicheck REVIEW:
./drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c:1688:16-17 use swap() to make code cleaner
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.
The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.
Export the key to file and run the following command to verify the
fix result:
openssl asn1parse -inform DER -in /path/to/key/file
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: 9363efb4 ("crypto: qce - Add support for AEAD algorithms")
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit c9f608c380 ("crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC
Driver") only adds drivers/crypto/keembay/keembay-ocs-ecc.c, but adds a
file entry drivers/crypto/keembay/ocs-ecc-curve-defs.h in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns warns:
warning: no file matches F: drivers/crypto/keembay/ocs-ecc-curve-defs.h
Assuming that this header is obsolete and will not be included in the
repository, remove the unneeded file entry from MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: c9f608c380 ("crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enable the kernel debug config, there is below calltrace detected:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339
caller is debug_smp_processor_id+0x20/0x30
CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_caam_enqueue+0x10c/0x25c
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
According to the comment in commit ac5d15b4519f("crypto: caam/qi2
- use affine DPIOs "), because preemption is no longer disabled
while trying to enqueue an FQID, it might be possible to run the
enqueue on a different CPU(due to migration, when in process context),
however this wouldn't be a functionality issue. But there will be
above calltrace when enable kernel debug config. So, replace this_cpu_ptr
with raw_cpu_ptr to avoid above call trace.
Fixes: ac5d15b451 ("crypto: caam/qi2 - use affine DPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.
HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.
This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
current cycles with the ones since last failure. cycles or time since
last failure is calculated using cycles and time info captured at (2).
HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case there were more requests from different tfms in the crypto
queue, only the context of the last initialized tfm was considered.
Fixes: ec2088b66f ("crypto: atmel-aes - Allocate aes dev at tfm init time")
Reported-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Introduce new generic kasprintf_strarray() API
* Clean up and convert existing drivers to use the above
The API will be needed in the future for new comers, including Intel ones.
The following is an automated git shortlog grouped by driver:
armada-37xx:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_ioremap_resource()
- Use temporary variable for struct device
- Fix function name in the kernel doc
gpio:
- mockup: Switch to use kasprintf_strarray()
lib/string_helpers:
- Introduce managed variant of kasprintf_strarray()
- Introduce kasprintf_strarray()
pinctrl/rockchip:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_get_and_ioremap_resource()
- Use temporary variable for struct device
- Drop wrong kernel doc annotation
st:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_ioremap_resource_byname()
- Use temporary variable for struct device
- Drop wrong kernel doc annotations
zynqmp:
- Unify pin naming
-----BEGIN PGP SIGNATURE-----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=iveX
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.17-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.17-2
* Introduce new generic kasprintf_strarray() API
* Clean up and convert existing drivers to use the above
The API will be needed in the future for new comers, including Intel ones.
The following is an automated git shortlog grouped by driver:
armada-37xx:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_ioremap_resource()
- Use temporary variable for struct device
- Fix function name in the kernel doc
gpio:
- mockup: Switch to use kasprintf_strarray()
lib/string_helpers:
- Introduce managed variant of kasprintf_strarray()
- Introduce kasprintf_strarray()
pinctrl/rockchip:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_get_and_ioremap_resource()
- Use temporary variable for struct device
- Drop wrong kernel doc annotation
st:
- Switch to use devm_kasprintf_strarray()
- Convert to use dev_err_probe()
- Make use of the devm_platform_ioremap_resource_byname()
- Use temporary variable for struct device
- Drop wrong kernel doc annotations
zynqmp:
- Unify pin naming
When a sock is added to a sock map we evaluate what proto op hooks need to
be used. However, when the program is removed from the sock map we have not
been evaluating if that changes the required program layout.
Before the patch listed in the 'fixes' tag this was not causing failures
because the base program set handles all cases. Specifically, the case with
a stream parser and the case with out a stream parser are both handled. With
the fix below we identified a race when running with a proto op that attempts
to read skbs off both the stream parser and the skb->receive_queue. Namely,
that a race existed where when the stream parser is empty checking the
skb->receive_queue from recvmsg at the precies moment when the parser is
paused and the receive_queue is not empty could result in skipping the stream
parser. This may break a RX policy depending on the parser to run.
The fix tag then loads a specific proto ops that resolved this race. But, we
missed removing that proto ops recv hook when the sock is removed from the
sockmap. The result is the stream parser is stopped so no more skbs will be
aggregated there, but the hook and BPF program continues to be attached on
the psock. User space will then get an EBUSY when trying to read the socket
because the recvmsg() handler is now waiting on a stopped stream parser.
To fix we rerun the proto ops init() function which will look at the new set
of progs attached to the psock and rest the proto ops hook to the correct
handlers. And in the above case where we remove the sock from the sock map
the RX prog will no longer be listed so the proto ops is removed.
Fixes: c5d2177a72 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211119181418.353932-3-john.fastabend@gmail.com
When a TCP socket is added to a sock map we look at the programs attached
to the map to determine what proto op hooks need to be changed. Before
the patch in the 'fixes' tag there were only two categories -- the empty
set of programs or a TX policy. In any case the base set handled the
receive case.
After the fix we have an optimized program for receive that closes a small,
but possible, race on receive. This program is loaded only when the map the
psock is being added to includes a RX policy. Otherwise, the race is not
possible so we don't need to handle the race condition.
In order for the call to sk_psock_init() to correctly evaluate the above
conditions all progs need to be set in the psock before the call. However,
in the current code this is not the case. We end up evaluating the
requirements on the old prog state. If your psock is attached to multiple
maps -- for example a tx map and rx map -- then the second update would pull
in the correct maps. But, the other pattern with a single rx enabled map
the correct receive hooks are not used. The result is the race fixed by the
patch in the fixes tag below may still be seen in this case.
To fix we simply set all psock->progs before doing the call into
sock_map_init(). With this the init() call gets the full list of programs
and chooses the correct proto ops on the first iteration instead of
requiring the second update to pull them in. This fixes the race case when
only a single map is used.
Fixes: c5d2177a72 ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211119181418.353932-2-john.fastabend@gmail.com
The struct aspm_latency is now used only inside pcie_aspm_check_latency().
Replace struct aspm_latency variables with u32 variables and remove struct
aspm_latency.
Link: https://lore.kernel.org/r/20211119193732.12343-5-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Previously we calculated the device's acceptable L0s and L1 exit latencies
in pcie_aspm_cap_init() and cached them in struct pcie_link_state.
These values are only used in pcie_aspm_check_latency() where they are
compared with the actual exit latencies of the link. This path is used
when removing or changing the D state of the device, so it's relatively low
frequency.
To reduce the amount of per-link data we store, remove the acceptable[]
arrays from struct pcie_link_state and calculate them directly from the
already-cached Device Capabilities register when needed.
[bhelgaas: use endpoint->devcap instead of reading it again]
Link: https://lore.kernel.org/r/20211119193732.12343-4-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we calculated the upstream and downstream L0s and L1 exit
latencies of the link in pcie_aspm_cap_init() and cached them in struct
pcie_link_state.latency_*.
These values are only used in pcie_aspm_check_latency() where they are
compared with the acceptable latencies on the link. This path is used when
removing or changing the D state of the device, so it's relatively low
frequency.
To reduce the amount of per-link data we store, remove the latency_*
entries from struct pcie_link_state and calculate the latencies directly
where they are needed.
Link: https://lore.kernel.org/r/20211119193732.12343-3-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The prototype of mem_map_via_hcall() is missing in its header, so add
it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a43fb7da53 ("xen/pvh: Move Xen code for getting mem map via hcall out of common file")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211119153913.21678-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
bpf_program__set_extra_flags has just been introduced so we can still
change it without breaking users.
This new interface is a bit more flexible (for example if someone wants
to clear a flag).
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211119180035.1396139-1-revest@chromium.org
Move pci_function_0() earlier so we can use it from other functions.
Link: https://lore.kernel.org/r/20211119193732.12343-2-refactormyself@gmail.com
Signed-off-by: Bolarinwa O. Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
* Prevent accesses to unsupported log pages as that causes device scan
failures with LLDDs using libsas (from me).
* A couple of fixes for AMD AHCI adapters handling of low power modes
and resume (from Mario).
* Fix a compilation warning (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYZghUgAKCRDdoc3SxdoY
dhOcAQC2K9EI479PDutvtwO9QOPr8mGCPh01t711G6BhQcJLBwEA7qzpMBpDxgRc
l39Nqs8Wc3UgiQnIqOFZnzux3xiN7A8=
=9kBE
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
- Prevent accesses to unsupported log pages as that causes device scan
failures with LLDDs using libsas (from me).
- A couple of fixes for AMD AHCI adapters handling of low power modes
and resume (from Mario).
- Fix a compilation warning (from me).
* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Declare ata_ncq_sdev_attrs static
ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
ata: libata: add missing ata_identify_page_supported() calls
ata: libata: improve ata_read_log_page() error message
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYZgSTRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqsJAQDg6Oe0XMclYPLMyRlEJEMEV2bFh8ZQ
G1jqvMLcMnuFZAEA2onhzHzjR1amXuSw9YwNHcDB7eHiaIg9pgdOFFDUpwI=
=KTcf
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't use out-of-sync va_list in event printing
tracing: Use memset_startat() to zero struct trace_iterator
tracing/histogram: Fix UAF in destroy_hist_field()