Killing the kernel because a certain MDIO bus object is not in the
desired state at various points in the registration or unregistration
paths is excessive and is not helping in troubleshooting or fixing
issues. Replace the BUG_ON() with WARN() and print out the MDIO bus name
to facilitate debugging.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.
EDIT: added {}'s, thanks Kees
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933
Fixes: 69a74aef8a ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: dpaa2: phylink validate implementation updates
This series converts dpaa2 to fill in the supported_interfaces member
of phylink_config, cleans up the validate() implementation, and then
converts to phylink_generic_validate(). Previous behaviour should be
preserved.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DPAA2 has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy interface mode bitmap for the Freescale DPAA2 driver
with interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: ag71xx: phylink validate implementation updates
This series converts ag71xx to fill in the supported_interfaces member
of phylink_config, cleans up the validate() implementation, and then
converts to phylink_generic_validate().
The question over the port linkmode restriction has been answered by
Oleksij - there is no reason for this restriction, so we can go the
whole hog with this conversion. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ag71xx apparently only supports MII port type, which makes it different
from other implementations. However, Oleksij says there is no special
reason for this.
Convert the driver to use phylink_generic_validate(), which will allow
all ethtool port linkmodes instead of only MII, giving the driver
consistent behaviour with other drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy_interface_t bitmap for the Atheros ag71xx driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlxsw driver calls to various devlink flash routines even before
users can get any access to the devlink instance itself. For example,
mlxsw_core_fw_rev_validate() one of such functions.
__mlxsw_core_bus_device_register
-> mlxsw_core_fw_rev_validate
-> mlxsw_core_fw_flash
-> mlxfw_firmware_flash
-> mlxfw_status_notify
-> devlink_flash_update_status_notify
-> __devlink_flash_update_notify
-> WARN_ON(...)
It causes to the WARN_ON to trigger warning about devlink not registered.
Fixes: cf53021740 ("devlink: Notify users when objects are accessible")
Reported-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split clocks settings from init callback into clks_config callback,
which could support platform level clock management.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit d00e60ee54.
As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.
1. https://www.spinics.net/lists/netdev/msg779890.html
Fixes: d00e60ee54 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Opcode support.
This is available on ThinkCenter and ThinkStations platforms and
gives improved password setting capabilities
Add options to configure System, HDD & NVMe passwords.
HDD & NVMe passwords need a user level (user/master) along with
drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-2-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The if statement:
if (port >= DSAF_GE_NUM)
return;
limits the value of port less than DSAF_GE_NUM (i.e., 8).
However, if the value of port is 6 or 7, an array overflow could occur:
port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).
To fix this possible array overflow, we first check port and if it is
greater than or equal to DSAF_MAX_PORT_NUM, the function returns.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block devices do not, in general, report congestion any more, so this
congestion_wait() is effectively just a sleep.
It isn't entirely clear what is being waited for, but as we only wait
when j_async_throttle is elevated, it seems reasonable to stop waiting
when j_async_throttle becomes zero - or after the same timeout.
So change to use wait_event_event_timeout() for waiting, and
wake_up_var() to signal an end to waiting.
Link: https://lore.kernel.org/r/163712368225.13692.3419908086400748349@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com
Newer Lenovo BIOS's have an opcode GUID support interface which provides
- improved password setting control
- ability to set System, hard drive and NVMe passwords
Add the support for these new passwords, and the ability to select
user/master mode and the drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit e4f2006f12.
This patch shows problems with signal handling. Revert it for now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15
Building allmodconfig shows errors in the gpu/drm/msm snapdragon drivers,
because a COND() define is used there which conflicts with the COND() for
PA-RISC assembly. Although the snapdragon driver isn't relevant for parisc, it
is nevertheless compiled when CONFIG_COMPILE_TEST is defined.
Move the COND() define and other PA-RISC mnemonics inside the #ifdef
__ASSEMBLY__ part to avoid this conflict.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Include stringify.h to avoid this build error:
arch/parisc/include/asm/jump_label.h: error: expected ':' before '__stringify'
arch/parisc/include/asm/jump_label.h: error: label 'l_yes' defined but not used [-Werror=unused-label]
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long". KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows. The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.
KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.
Fixes: fa3d315a4c ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When modifying memslots, snapshot the "old" memslot and copy it to the
"new" memslot's arch data after (re)acquiring slots_arch_lock. x86 can
change a memslot's arch data while memslot updates are in-progress so
long as it holds slots_arch_lock, thus snapshotting a memslot without
holding the lock can result in the consumption of stale data.
Fixes: b10a038e84 ("KVM: mmu: Add slots_arch_lock for memslot arch fields")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104002531.1176691-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When recursively clearing out disconnected pts, the range based TLB
flush in handle_removed_tdp_mmu_page uses the wrong starting GFN,
resulting in the flush mostly missing the affected range. Fix this by
using base_gfn for the flush.
In response to feedback from David Matlack on the RFC version of this
patch, also move a few definitions into the for loop in the function to
prevent unintended references to them in the future.
Fixes: a066e61f13 ("KVM: x86/mmu: Factor out handling of removed page tables")
CC: stable@vger.kernel.org
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115211704.2621644-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NR_VCPUS is a legacy advisory value which on other architectures
return num_online_cpus() caped by KVM_CAP_NR_VCPUS or something else
(ppc and arm64 are special cases). On s390, KVM_CAP_NR_VCPUS returns
the same as KVM_CAP_MAX_VCPUS and this may turn out to be a bad
'advice'. Switch s390 to returning caped num_online_cpus() too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211116163443.88707-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Message-Id: <20211116163443.88707-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generally, it doesn't make sense to return the recommended maximum number
of vCPUs which exceeds the maximum possible number of vCPUs.
Note: ARM64 is special as the value returned by KVM_CAP_MAX_VCPUS differs
depending on whether it is a system-wide ioctl or a per-VM one. Previously,
KVM_CAP_NR_VCPUS didn't have this difference and it seems preferable to
keep the status quo. Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
which is what gets returned by system-wide KVM_CAP_MAX_VCPUS.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-2-vkuznets@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing a hypercall for a guest with protected state, currently
SEV-ES guests, the guest CS segment register can't be checked to
determine if the guest is in 64-bit mode. For an SEV-ES guest, it is
expected that communication between the guest and the hypervisor is
performed to shared memory using the GHCB. In order to use the GHCB, the
guest must have been in long mode, otherwise writes by the guest to the
GHCB would be encrypted and not be able to be comprehended by the
hypervisor.
Create a new helper function, is_64_bit_hypercall(), that assumes the
guest is in 64-bit mode when the guest has protected state, and returns
true, otherwise invoking is_64_bit_mode() to determine the mode. Update
the hypercall related routines to use is_64_bit_hypercall() instead of
is_64_bit_mode().
Add a WARN_ON_ONCE() to is_64_bit_mode() to catch occurences of calls to
this helper function for a guest running with protected state.
Fixes: f1c6366e30 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e0b20c770c9d0d1403f23d83e785385104211f74.1621878537.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$ git status
nothing to commit, working tree clean
$
$ make -C tools/testing/selftests/kvm/ > /dev/null 2>&1
$ git status
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/kvm/x86_64/sev_migrate_tests
nothing added to commit but untracked files present (use "git add" to track)
$
Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Message-Id: <YZPIPfvYgRDCZi/w@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't use "/**" to begin a comment block for a non-kernel-doc comment.
Prevents this docs build warning:
vcpu_sbi.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: kvm@vger.kernel.org
Cc: kvm-riscv@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <20211107034706.30672-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
Rename cmd_allowed_from_miror() to is_cmd_allowed_from_mirror(), fixing
a typo and making it obvious that the result is a boolean where
false means "not allowed".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a fully redundant write to sev->asid during SEV/SEV-ES guest
initialization. The ASID is set a few lines earlier prior to the call to
sev_platform_init(), which doesn't take "sev" as a param, i.e. can't
muck with the ASID barring some truly magical behind-the-scenes code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if the VM is tagged as SEV-ES but not SEV. KVM relies on SEV and
SEV-ES being set atomically, and guards common flows with "is SEV", i.e.
observing SEV-ES without SEV means KVM has a fatal bug.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set sev_info.active during SEV/SEV-ES activation before calling any code
that can potentially consume sev_info.es_active, e.g. set "active" and
"es_active" as a pair immediately after the initial sanity checks. KVM
generally expects that es_active can be true if and only if active is
true, e.g. sev_asid_new() deliberately avoids sev_es_guest() so that it
doesn't get a false negative. This will allow WARNing in sev_es_guest()
if the VM is tagged as SEV-ES but not SEV.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject COPY_ENC_CONTEXT_FROM if the destination VM has created vCPUs.
KVM relies on SEV activation to occur before vCPUs are created, e.g. to
set VMCB flags and intercepts correctly.
Fixes: 54526d1fd5 ("KVM: x86: Support KVM VMs sharing SEV context")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Nathan Tempelman <natet@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time /
preempted status") I removed the only user of these functions because
it was basically impossible to use them safely.
There are two stages to the GFN->PFN mapping; first through the KVM
memslots to a userspace HVA and then through the page tables to
translate that HVA to an underlying PFN. Invalidations of the former
were being handled correctly, but no attempt was made to use the MMU
notifiers to invalidate the cache when the HVA->GFN mapping changed.
As a prelude to reinventing the gfn_to_pfn_cache with more usable
semantics, rip it out entirely and untangle the implementation of
the unsafe kvm_vcpu_map()/kvm_vcpu_unmap() functions from it.
All current users of kvm_vcpu_map() also look broken right now, and
will be dealt with separately. They broadly fall into two classes:
* Those which map, access the data and immediately unmap. This is
mostly gratuitous and could just as well use the existing user
HVA, and could probably benefit from a gfn_to_hva_cache as they
do so.
* Those which keep the mapping around for a longer time, perhaps
even using the PFN directly from the guest. These will need to
be converted to the new gfn_to_pfn_cache and then kvm_vcpu_map()
can be removed too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-8-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
And thus another call to kvm_vcpu_map() can die.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-7-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kill another mostly gratuitous kvm_vcpu_map() which could just use the
userspace HVA for it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-6-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using kvm_vcpu_map() for reading from the guest is entirely gratuitous,
when all we do is a single memcpy and unmap it again. Fix it up to use
kvm_read_guest()... but in fact I couldn't bring myself to do that
without also making it use a gfn_to_hva_cache for both that *and* the
copy in the other direction.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>