kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
1,415,549 commits 117 branches 5,827 tags 6.3 GiB
Commit graph

131 commits

Author SHA1 Message Date
Linus Torvalds
9b1b3dcd28 Power management updates for 6.20-rc1/7.0-rc1 
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
 
  - Optimize error handling code in cpufreq_boost_trigger_state() and
    make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
    supports boost (Lifeng Zheng)
 
  - Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
    Dhruva Gole, and Konrad Dybcio)
 
  - Minor improvements to the cpufreq and cpumask rust implementation
    (Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
 
  - Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
 
  - Update arch_freq_scale in the CPPC cpufreq driver's frequency
    invariance engine (FIE) in scheduler ticks if the related CPPC
    registers are not in PCC (Jie Zhan)
 
  - Assorted minor cleanups and improvements in ARM cpufreq drivers (Juan
    Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
 
  - Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
    Gupta)
 
  - Make the scaling_setspeed cpufreq sysfs attribute return the actual
    requested frequency to avoid confusion (Pengjie Zhang)
 
  - Simplify the idle CPU time granularity test in the ondemand cpufreq
    governor (Frederic Weisbecker)
 
  - Enable asym capacity in intel_pstate only when CPU SMT is not
    possible (Yaxiong Tian)
 
  - Update the description of rate_limit_us default value in cpufreq
    documentation (Yaxiong Tian)
 
  - Add a command line option to adjust the C-states table in the
    intel_idle driver, remove the 'preferred_cstates' module parameter
    from it, add C-states validation to it and clean it up (Artem
    Bityutskiy)
 
  - Make the menu cpuidle governor always check the time till the closest
    timer event when the scheduler tick has been stopped to prevent it
    from mistakenly selecting the deepest available idle state (Rafael
    Wysocki)
 
  - Update the teo cpuidle governor to avoid making suboptimal decisions
    in certain corner cases and generally improve idle state selection
    accuracy (Rafael Wysocki)
 
  - Remove an unlikely() annotation on the early-return condition in
    menu_select() that leads to branch misprediction 100% of the time
    on systems with only 1 idle state enabled, like ARM64 servers (Breno
    Leitao)
 
  - Add Christian Loehle to MAINTAINERS as a cpuidle reviewer (Christian
    Loehle)
 
  - Stop flagging the PM runtime workqueue as freezable to avoid system
    suspend and resume deadlocks in subsystems that assume asynchronous
    runtime PM to work during system-wide PM transitions (Rafael Wysocki)
 
  - Drop redundant NULL pointer checks before acomp_request_free() from
    the hibernation code handling image saving (Rafael Wysocki)
 
  - Update wakeup_sources_walk_start() to handle empty lists of wakeup
    sources as appropriate (Samuel Wu)
 
  - Make dev_pm_clear_wake_irq() check the power.wakeirq value under
    power.lock to avoid race conditions (Gui-Dong Han)
 
  - Avoid bit field races related to power.work_in_progress in the core
    device suspend code (Xuewen Yan)
 
  - Make several drivers discard pm_runtime_put() return value in
    preparation for converting that function to a void one (Rafael
    Wysocki)
 
  - Add PL4 support for Ice Lake to the Intel RAPL power capping
    driver (Daniel Tang)
 
  - Replace sprintf() with sysfs_emit() in power capping sysfs show
    functions (Sumeet Pawnikar)
 
  - Make dev_pm_opp_get_level() return value match the documentation
    after a previous update of the latter (Aleks Todorov)
 
  - Use scoped for each OF child loop in the OPP code (Krzysztof
    Kozlowski)
 
  - Fix a bug in an example code snippet and correct typos in the energy
    model management documentation (Patrick Little)
 
  - Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
 
    * idle_monitor: Fix incorrect value logged after stop
    * Fix inverted APERF capability check
    * Use strcspn() to strip trailing newline
    * Reset errno before strtoull()
    * Show C0 in idle-info dump
 
  - Improve cpupower installation procedure by making the systemd step
    optional and allowing users to disable the installation of systemd's
    unit file (João Marcos Costa)
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmDr5ASHHJqd0Byand5
 c29ja2kubmV0AAoJEO5fvZ0v1OO1Q8oH/0KRqdidHzesIQl6gd5WSS/sWdxODRUt
 R9dEGQQ6LXCY0z05RAq29HZQf618fYuRFX4PSrtyCvrcRJK7MJKuzK55MRq0MC3c
 c/2pL1PdpHexjLXUP9pcoxrYjetsr7SnD6Y0M3JfOPg1E/bG8sp1DlnE8cdqrL0W
 lrdB2cEGewT2SVkNhCIQ2n6bwfQwmLlfQl1vXTM8BA7xCjoslePUJlRphAFVAt/J
 5fQxSOH0eSxK5PYQFUDM2D2J3uMAN0pFb6eIjwVYYqjABqV//BPl99Rv2W3ElJq7
 K/SICRWlvzyINCgF15QAUtQHWdINxSb0GzovECVxODHOv0N4mKHdpNU=
 =QlVe
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "By the number of commits, cpufreq is the leading party (again) and the
  most visible change there is the removal of the omap-cpufreq driver
  that has not been used for a long time (good riddance). There are also
  quite a few changes in the cppc_cpufreq driver, mostly related to
  fixing its frequency invariance engine in the case when the CPPC
  registers used by it are not in PCC. In addition to that, support for
  AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
  list is updated for some platforms. The remaining cpufreq changes are
  assorted fixes and cleanups.

  Next up is cpuidle and the changes there are dominated by intel_idle
  driver updates, mostly related to the new command line facility
  allowing users to adjust the list of C-states used by the driver.
  There are also a few updates of cpuidle governors, including two menu
  governor fixes and some refinements of the teo governor, and a
  MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
  [Thanks for stepping up Christian!]

  The most significant update related to system suspend and hibernation
  is the one to stop freezing the PM runtime workqueue during system PM
  transitions which allows some deadlocks to be avoided. There is also a
  fix for possible concurrent bit field updates in the core device
  suspend code and a few other minor fixes.

  Apart from the above, several drivers are updated to discard the
  return value of pm_runtime_put() which is going to be converted to a
  void function as soon as everybody stops using its return value, PL4
  support for Ice Lake is added to the Intel RAPL power capping driver,
  and there are assorted cleanups, documentation fixes, and some
  cpupower utility improvements.

  Specifics:

   - Remove the unused omap-cpufreq driver (Andreas Kemnade)

   - Optimize error handling code in cpufreq_boost_trigger_state() and
     make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
     supports boost (Lifeng Zheng)

   - Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
     Dhruva Gole, and Konrad Dybcio)

   - Minor improvements to the cpufreq and cpumask rust implementation
     (Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)

   - Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)

   - Update arch_freq_scale in the CPPC cpufreq driver's frequency
     invariance engine (FIE) in scheduler ticks if the related CPPC
     registers are not in PCC (Jie Zhan)

   - Assorted minor cleanups and improvements in ARM cpufreq drivers
     (Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)

   - Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
     Gupta)

   - Make the scaling_setspeed cpufreq sysfs attribute return the actual
     requested frequency to avoid confusion (Pengjie Zhang)

   - Simplify the idle CPU time granularity test in the ondemand cpufreq
     governor (Frederic Weisbecker)

   - Enable asym capacity in intel_pstate only when CPU SMT is not
     possible (Yaxiong Tian)

   - Update the description of rate_limit_us default value in cpufreq
     documentation (Yaxiong Tian)

   - Add a command line option to adjust the C-states table in the
     intel_idle driver, remove the 'preferred_cstates' module parameter
     from it, add C-states validation to it and clean it up (Artem
     Bityutskiy)

   - Make the menu cpuidle governor always check the time till the
     closest timer event when the scheduler tick has been stopped to
     prevent it from mistakenly selecting the deepest available idle
     state (Rafael Wysocki)

   - Update the teo cpuidle governor to avoid making suboptimal
     decisions in certain corner cases and generally improve idle state
     selection accuracy (Rafael Wysocki)

   - Remove an unlikely() annotation on the early-return condition in
     menu_select() that leads to branch misprediction 100% of the time
     on systems with only 1 idle state enabled, like ARM64 servers
     (Breno Leitao)

   - Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
     (Christian Loehle)

   - Stop flagging the PM runtime workqueue as freezable to avoid system
     suspend and resume deadlocks in subsystems that assume asynchronous
     runtime PM to work during system-wide PM transitions (Rafael
     Wysocki)

   - Drop redundant NULL pointer checks before acomp_request_free() from
     the hibernation code handling image saving (Rafael Wysocki)

   - Update wakeup_sources_walk_start() to handle empty lists of wakeup
     sources as appropriate (Samuel Wu)

   - Make dev_pm_clear_wake_irq() check the power.wakeirq value under
     power.lock to avoid race conditions (Gui-Dong Han)

   - Avoid bit field races related to power.work_in_progress in the core
     device suspend code (Xuewen Yan)

   - Make several drivers discard pm_runtime_put() return value in
     preparation for converting that function to a void one (Rafael
     Wysocki)

   - Add PL4 support for Ice Lake to the Intel RAPL power capping driver
     (Daniel Tang)

   - Replace sprintf() with sysfs_emit() in power capping sysfs show
     functions (Sumeet Pawnikar)

   - Make dev_pm_opp_get_level() return value match the documentation
     after a previous update of the latter (Aleks Todorov)

   - Use scoped for each OF child loop in the OPP code (Krzysztof
     Kozlowski)

   - Fix a bug in an example code snippet and correct typos in the
     energy model management documentation (Patrick Little)

   - Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
      * idle_monitor: Fix incorrect value logged after stop
      * Fix inverted APERF capability check
      * Use strcspn() to strip trailing newline
      * Reset errno before strtoull()
      * Show C0 in idle-info dump

   - Improve cpupower installation procedure by making the systemd step
     optional and allowing users to disable the installation of
     systemd's unit file (João Marcos Costa)"

* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  PM: sleep: core: Avoid bit field races related to work_in_progress
  PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
  cpufreq: Documentation: Update description of rate_limit_us default value
  cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
  PM: wakeup: Handle empty list in wakeup_sources_walk_start()
  PM: EM: Documentation: Fix bug in example code snippet
  Documentation: Fix typos in energy model documentation
  cpuidle: governors: teo: Refine intercepts-based idle state lookup
  cpuidle: governors: teo: Adjust the classification of wakeup events
  cpufreq: ondemand: Simplify idle cputime granularity test
  cpufreq: userspace: make scaling_setspeed return the actual requested frequency
  PM: hibernate: Drop NULL pointer checks before acomp_request_free()
  cpufreq: CPPC: Add generic helpers for sysfs show/store
  cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
  cpufreq: ti-cpufreq: add support for AM62L3 SoC
  cpufreq: dt-platdev: Add ti,am62l3 to blocklist
  cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
  cpufreq: scmi: correct SCMI explanation
  cpufreq: dt-platdev: Block the driver from probing on more QC platforms
  rust: cpumask: rename methods of Cpumask for clarity and consistency
  ...
 2026-02-09 19:00:42 -08:00
Linus Torvalds
4b6c6bc6fa vfs-7.0-rc1.rust 
Please consider pulling these changes from the signed vfs-7.0-rc1.rust tag.
 
 Thanks!
 Christian
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaYX49gAKCRCRxhvAZXjc
 oheVAQCQdJGRfbo13G4Z8UJg239TRTkCckEpXJaPMyunpdeSNwD/YQctuOS3vW6b
 TbTBY4vlpSmdWYwZUH+P6zZaeSMgsQE=
 =R6mK
 -----END PGP SIGNATURE-----

Merge tag 'vfs-7.0-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs rust updates from Christian Brauner:
 "Allow inlining C helpers into Rust when using LTO: Add the
  __rust_helper annotation to all VFS-related Rust helper functions.

  Currently, C helpers cannot be inlined into Rust code even under LTO
  because LLVM detects slightly different codegen options between the C
  and Rust compilation units (differing null-pointer-check flags,
  builtin lists, and target feature strings). The __rust_helper macro is
  the first step toward fixing this: it is currently #defined to
  nothing, but a follow-up series will change it to __always_inline when
  compiling with LTO (while keeping it empty for bindgen, which ignores
  inline functions).

  This picks up the VFS portion (fs, pid_namespace, poll) of a larger
  tree-wide series"

* tag 'vfs-7.0-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  rust: poll: add __rust_helper to helpers
  rust: pid_namespace: add __rust_helper to helpers
  rust: fs: add __rust_helper to helpers
 2026-02-09 10:41:56 -08:00
Linus Torvalds
bcc8fd3e15 lsm/stable-7.0 PR 20260203 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmmCurkUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNDWA//RZxjjyY1I0GRDepJXJ8UFEVt4Fdr
 VsnSKL3o7sf0SAsQj2HCJsJPiwD5fHm2C2gdxh9rFC0bPpMbTVAkwUL7WhP+nkAt
 LA+UZKYurrk1XF6OctILoY3JcXmynb1Oe3lg6uVcWX5b1uEriqRgGKNcMYLb5fmr
 D1vZ9LMuZe8WwGTScprQID9FMrZ0TDbdI/vqG7si1W/PCFH7630MPJkmzmjPWvnV
 xJISKLOG+qbyWoNGLr+VaNjkmA+jPfsXAKWbfNXUGfikP8g/OHpFd70nIzJs8p7J
 dxZD7w6/kqSGhauQjcX8ov0zKxn83Z2Xt0+4Ldl5vOCWI3r4T3Y8WdarmULbq65n
 jIN8djDgmCJPqa5zuPmik+womaPk2GmSy1viEJdT4W0iHggTC1snOz1J+BbD+nkh
 uEZkmcCZbaeEQmfefxIyHDirrFsJvrunWupGrkfxvfFr+QU8H1xNLfMd6CQzvtI4
 P5p/KrnP2e58tJqvPxSY315ewUMy73kZU5DUl+Rq6Y4ai415R7vtwwEEkSKWnyja
 LMdEumc9IrsiBMcLmsj8QwobCr7XJtdCQV5ohR8CPxxcsI/G0pR99e1pckD7l7Qm
 OG461BKHntU3SFWSiZw+rNWlJuyPcSy5nmUxQvxQHP9pShZPu8rTfYX+CBzrHJk2
 OFjAwNJn1N/NfYI=
 =cCyp
 -----END PGP SIGNATURE-----

Merge tag 'lsm-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm updates from Paul Moore:

 - Unify the security_inode_listsecurity() calls in NFSv4

   While looking at security_inode_listsecurity() with an eye towards
   improving the interface, we realized that the NFSv4 code was making
   multiple calls to the LSM hook that could be consolidated into one.

 - Mark the LSM static branch keys as static - this helps resolve some
   sparse warnings

 - Add __rust_helper annotations to the LSM and cred wrapper functions

 - Remove the unsused set_security_override_from_ctx() function

 - Minor fixes to some of the LSM kdoc comment blocks

* tag 'lsm-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: make keys for static branch static
  cred: remove unused set_security_override_from_ctx()
  rust: security: add __rust_helper to helpers
  rust: cred: add __rust_helper to helpers
  nfs: unify security_inode_listsecurity() calls
  lsm: fix kernel-doc struct member names
 2026-02-09 10:16:48 -08:00
Linus Torvalds
7d726a34d6 linux_kselftest-kunit-6.20-rc1 
kunit:
 - adds __rust_helper to helpers
 - fixes up const mis-match in many assert functions
 - fixes up const mismatch in test_list_sort
 - protects KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
 - respects KBUILD_OUTPUT env variable by default
 - adds bash completion
 
 kunit tool:
 - adds test for nested test result reporting
 - fixes to not overwrite test status based on subtest counts
 - adds 32-bit big endian ARM configuration to qemu_configs
 - renames test_data_path() to _test_data_path()
 - fixes relying on implicit working directory change
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAml8f08ACgkQCwJExA0N
 Qxws1w/9GCnGCGbcdY+uw4ExyLGWZM/Gfecjtf03yspVl9/ohrkkR5K6wkfXdKMH
 Cb1J9dI7z+7GAwtDg2C7AQNa/mtiUBu7fSfrCTohExeGSL4okkJEdk7IcYouPtFG
 TCYBnIXiz7bp1HDk7zn1D8w2brstp5VKnNTgvfEWaoH60WypEavukJqmy6knrJ0z
 Ot0mNhPi5I/wJUAjSLvg85M4KKL1t0Z6Kj4JWytaPLOhz7UG94JE2XvO6vNmB1Qt
 3Scym/8RpR6k7zdp6YriffFjCCPTZMvLZEDQggCsEHiqGJjCAWOp8yBQdhzYEt5g
 SbFvZOL3Jvl1jXMfPdOVYFXu08/2hHz7OHqkkrHfa4lgirQxTwAuF+sNkWJ63pci
 ppAUtsvs56GY0/+XUWviRJXH+9ajUjpkB6RmeMz/Vlj61pWmKqjqYXinMfFTC1ae
 HphrQFNIGVJVvZtF2V6wbYpCNKb9pPy8/Pje4EWofVbIJWgIHCh6PsO+ebhvfyPr
 4wuGO75Vg+Jv3kGZycITqxGgn3YdC05RAVQGbLso8yXsVwoZnvGDC+RN+j3pA2WJ
 qFkREu/pn9AInHOEr24vHsSL6Dn8le6AWbi0vjNbG23r04fs7WDxeKZWgAFRIO1g
 zThDQGDAO4A1E0jW6bXmFA7GD4a78tbyFUflyXTjR9JDeXDWXRs=
 =ofp6
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:
 "kunit:
   - add __rust_helper to helpers
   - fix up const mismatch in many assert functions
   - fix up const mismatch in test_list_sort
   - protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
   - respect KBUILD_OUTPUT env variable by default
   - add bash completion

  kunit tool:
   - add test for nested test result reporting
   - do not overwrite test status based on subtest counts
   - add 32-bit big endian ARM configuration to qemu_configs
   - rename test_data_path() to _test_data_path()
   - do not rely on implicit working directory change"

* tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: add bash completion
  kunit: tool: test: Don't rely on implicit working directory change
  kunit: tool: test: Rename test_data_path() to _test_data_path()
  kunit: qemu_configs: Add 32-bit big endian ARM configuration
  kunit: tool: Don't overwrite test status based on subtest counts
  kunit: tool: Add test for nested test result reporting
  kunit: respect KBUILD_OUTPUT env variable by default
  kunit: Protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
  test_list_sort: fix up const mismatch
  kunit: fix up const mis-match in many assert functions
  rust: kunit: add __rust_helper to helpers
 2026-02-09 09:37:55 -08:00
Rafael J. Wysocki
b753c3204d CPUFreq arm updates for 7.0 
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
   Dhruva Gole, and Konrad Dybcio).
 
 - Minor improvements to the cpufreq / cpumask rust implementation
   (Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
 
 - Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
 
 - Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
 
 - Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
   Weiss, and Sergey Shtylyov).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAml4YIcACgkQ0rkcPK6B
 Ehx6hQ//Y8GoICqNQe6IrVQ6b9eJLB/YOP7vPyZuwc0iqT9YWXrMou5xlnmNW/IY
 zj0Wo3l3fidp6eDOo7f21mXALF9yt8kElKq411Oqcg4WVWyAXc9p6ODpWZp/G2/h
 JcmusAkwFPul0XE0QJmlJ54KqtsyjoSWQHtrPzOO54mJEhOL4dWQwqhWP046ed7T
 FVkNRLb7ysY3+weNuAg45SbVJ3FT/a7f8XbdGd5DAz96efbqTyFt+znhfsd3Xti+
 sF75Mq1AEN0Vnfb8ZP4MZUCe7zeVdOVfLFqXXiW/qJOdbRgoD6k2uAOIt2NAcYU/
 sbv6UjaW0NE0oTvKbJ8CLE4IIJudjRgVNjyyGlKHdjBVgMQQk9vr7DIedGLghink
 VABcyerIqhPFGkBkY0IXkLSmhNtKWoLN9w7sMeCwhE34l63Bnie3Sg9JLikRxaXK
 6BAm3+8BiG30tg4WL1LX8UyssnMlUGvvOD9TCP4jOfLQeAk8wWgQ1D+CwWCB5o5j
 jtDwPTOCIN9UQT46lYS+kkqzwf4YTFVdA4c23Tod70gjrtm7Z1a7UzYNxoTGcGS3
 VtrgVnlgPh3/I/95Qpsgoy5D1oeIz9znFoVv6ETPBINy4A4rAsYMA4DEASfM7tIY
 pNhbSTcbtDbp6Eo79hkh5J2ZGoJyTSthrX+irqOz+IQFp8fP9s4=
 =Zz3B
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:

"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
   Dhruva Gole, and Konrad Dybcio).

 - Minor improvements to the cpufreq / cpumask rust implementation
   (Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).

 - Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).

 - Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).

 - Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
   Weiss, and Sergey Shtylyov)."

* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
  cpufreq: ti-cpufreq: add support for AM62L3 SoC
  cpufreq: dt-platdev: Add ti,am62l3 to blocklist
  cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
  cpufreq: scmi: correct SCMI explanation
  cpufreq: dt-platdev: Block the driver from probing on more QC platforms
  rust: cpumask: rename methods of Cpumask for clarity and consistency
  cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
  cpufreq: CPPC: Factor out cppc_fie_kworker_init()
  ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
  rust: cpufreq: replace `kernel::c_str!` with C-Strings
  cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
  dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
  rust: cpufreq: add __rust_helper to helpers
  rust: cpufreq: always inline functions using build_assert with arguments
 2026-01-27 14:46:28 +01:00
Alice Ryhl
9d84fd86d9 rust: cpufreq: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
 2026-01-27 11:21:22 +05:30
Alice Ryhl
6a069876eb rust: bitops: fix missing _find_* functions on 32-bit ARM 
On 32-bit ARM, you may encounter linker errors such as this one:

	ld.lld: error: undefined symbol: _find_next_zero_bit
	>>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0
	>>>               drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a
	>>> referenced by rust_binder_main.43196037ba7bcee1-cgu.0
	>>>               drivers/android/binder/rust_binder_main.o:(<rust_binder_main::process::Process>::insert_or_update_handle) in archive vmlinux.a

This error occurs because even though the functions are declared by
include/linux/find.h, the definition is #ifdef'd out on 32-bit ARM. This
is because arch/arm/include/asm/bitops.h contains:

	#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
	#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
	#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
	#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)

And the underscore-prefixed function is conditional on #ifndef of the
non-underscore-prefixed name, but the declaration in find.h is *not*
conditional on that #ifndef.

To fix the linker error, we ensure that the symbols in question exist
when compiling Rust code. We do this by defining them in rust/helpers/
whenever the normal definition is #ifndef'd out.

Note that these helpers are somewhat unusual in that they do not have
the rust_helper_ prefix that most helpers have. Adding the rust_helper_
prefix does not compile, as 'bindings::_find_next_zero_bit()' will
result in a call to a symbol called _find_next_zero_bit as defined by
include/linux/find.h rather than a symbol with the rust_helper_ prefix.
This is because when a symbol is present in both include/ and
rust/helpers/, the one from include/ wins under the assumption that the
current configuration is one where that helper is unnecessary. This
heuristic fails for _find_next_zero_bit() because the header file always
declares it even if the symbol does not exist.

The functions still use the __rust_helper annotation. This lets the
wrapper function be inlined into Rust code even if full kernel LTO is
not used once the patch series for that feature lands.

Yury: arches are free to implement they own find_bit() functions. Most
rely on generic implementation, but arm32 and m86k - not; so they require
custom handling. Alice confirmed it fixes the build for both.

Cc: stable@vger.kernel.org
Fixes: 6cf93a9ed3 ("rust: add bindings for bitops.h")
Reported-by: Andreas Hindborg <a.hindborg@kernel.org>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/x/topic/x/near/561677301
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
 2026-01-13 22:16:39 -05:00
Alice Ryhl
2d38a4e3e2 rust: security: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2026-01-06 20:30:09 -05:00
Alice Ryhl
517fd96cba rust: cred: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
 2026-01-06 20:30:09 -05:00
Alice Ryhl
567b3d3af6 rust: kunit: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Link: https://lore.kernel.org/r/20251202-define-rust-helper-v1-22-a2e13cbc17a6@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
 2026-01-05 15:32:03 -07:00
FUJITA Tomonori
d8932355f8 rust: dma: add helpers for architectures without CONFIG_HAS_DMA 
Add dma_set_mask(), dma_set_coherent_mask(), dma_map_sgtable(), and
dma_max_mapping_size() helpers to fix a build error when
CONFIG_HAS_DMA is not enabled.

Note that when CONFIG_HAS_DMA is enabled, they are included in both
bindings_generated.rs and bindings_helpers_generated.rs. The former
takes precedence so behavior remains unchanged in that case.

This fixes the following build error on UML:

error[E0425]: cannot find function `dma_set_mask` in crate `bindings`
     --> rust/kernel/dma.rs:46:38
      |
   46 |         to_result(unsafe { bindings::dma_set_mask(self.as_ref().as_raw(), mask.value()) })
      |                                      ^^^^^^^^^^^^ help: a function with a similar name exists: `xa_set_mark`
      |
     ::: rust/bindings/bindings_generated.rs:24690:5
      |
24690 |     pub fn xa_set_mark(arg1: *mut xarray, index: ffi::c_ulong, arg2: xa_mark_t);
      |     ---------------------------------------------------------------------------- similarly named function `xa_set_mark` defined here

error[E0425]: cannot find function `dma_set_coherent_mask` in crate `bindings`
     --> rust/kernel/dma.rs:63:38
      |
   63 |         to_result(unsafe { bindings::dma_set_coherent_mask(self.as_ref().as_raw(), mask.value()) })
      |                                      ^^^^^^^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_coherent_ok`
      |
     ::: rust/bindings/bindings_generated.rs:52745:5
      |
52745 |     pub fn dma_coherent_ok(dev: *mut device, phys: phys_addr_t, size: usize) -> bool_;
      |     ---------------------------------------------------------------------------------- similarly named function `dma_coherent_ok` defined here

error[E0425]: cannot find function `dma_map_sgtable` in crate `bindings`
    --> rust/kernel/scatterlist.rs:212:23
     |
 212 |               bindings::dma_map_sgtable(dev.as_raw(), sgt.as_ptr(), dir.into(), 0)
     |                         ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_unmap_sgtable`
     |
    ::: rust/bindings/bindings_helpers_generated.rs:1351:5
     |
1351 | /     pub fn dma_unmap_sgtable(
1352 | |         dev: *mut device,
1353 | |         sgt: *mut sg_table,
1354 | |         dir: dma_data_direction,
1355 | |         attrs: ffi::c_ulong,
1356 | |     );
     | |______- similarly named function `dma_unmap_sgtable` defined here

error[E0425]: cannot find function `dma_max_mapping_size` in crate `bindings`
   --> rust/kernel/scatterlist.rs:356:52
    |
356 |         let max_segment = match unsafe { bindings::dma_max_mapping_size(dev.as_raw()) } {
    |                                                    ^^^^^^^^^^^^^^^^^^^^ not found in `bindings`

error: aborting due to 4 previous errors

Cc: stable@vger.kernel.org # v6.17+
Fixes: 101d66828a ("rust: dma: add DMA addressing capabilities")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251204160639.364936-1-fujita.tomonori@gmail.com
[ Use relative paths in the error splat; add 'dma' prefix. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-12-16 13:20:14 +01:00
Alice Ryhl
268eaa8ab4
 		rust: poll: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251202-define-rust-helper-v1-29-a2e13cbc17a6@google.com
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2025-12-15 14:13:04 +01:00
Alice Ryhl
fc73d4b4d2
 		rust: pid_namespace: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251202-define-rust-helper-v1-27-a2e13cbc17a6@google.com
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2025-12-15 14:13:03 +01:00
Alice Ryhl
b266a39eb2
 		rust: fs: add __rust_helper to helpers 
This is needed to inline these helpers into Rust code.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251202-define-rust-helper-v1-18-a2e13cbc17a6@google.com
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2025-12-15 14:13:03 +01:00
Linus Torvalds
f5e9d31e79 USB/Thunderbolt changes for 6.19-rc1 
Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
 Nothing major here, just lots of tiny updates for most of the common USB
 drivers.  Included in here are:
   - more xhci driver updates and fixes
   - Thunderbolt driver cleanups
   - usb serial driver updates
   - typec driver updates
   - USB tracepoint additions
   - dwc3 driver updates, including support for Apple hardware
   - lots of other smaller driver updates and cleanups
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
 C4/4pui5ifTu1g5Vud1r
 =Sm/3
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  6.19-rc1. Nothing major here, just lots of tiny updates for most of
  the common USB drivers. Included in here are:

   - more xhci driver updates and fixes

   - Thunderbolt driver cleanups

   - usb serial driver updates

   - typec driver updates

   - USB tracepoint additions

   - dwc3 driver updates, including support for Apple hardware

   - lots of other smaller driver updates and cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
  usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
  USB: serial: option: move Telit 0x10c7 composition in the right place
  USB: serial: option: add Telit Cinterion FE910C04 new compositions
  usb: typec: ucsi: fix use-after-free caused by uec->work
  usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
  usb: dwc3: core: Remove redundant comment in core init
  usb: phy: Initialize struct usb_phy list_head
  USB: serial: option: add Foxconn T99W760
  usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
  usb: typec: hd3ss3220: Enable VBUS based on ID pin state
  dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
  usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
  USB: add WQ_PERCPU to alloc_workqueue users
  dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
  drivers/usb/storage: use min() instead of min_t()
  usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
  usb: ohci-da8xx: remove unused platform data
  usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
  usb: uas: reduce time under spinlock
  usb: dwc3: eic7700: Add EIC7700 USB driver
  ...
 2025-12-06 18:42:12 -08:00
Linus Torvalds
509d3f4584 Significant patch series in this pull request: 
- The 6 patch series "panic: sys_info: Refactor and fix a potential
   issue" from Andy Shevchenko fixes a build issue and does some cleanup in
   ib/sys_info.c.
 
 - The 9 patch series "Implement mul_u64_u64_div_u64_roundup()" from
   David Laight enhances the 64-bit math code on behalf of a PWM driver and
   beefs up the test module for these library functions.
 
 - The 2 patch series "scripts/gdb/symbols: make BPF debug info available
   to GDB" from Ilya Leoshkevich makes BPF symbol names, sizes, and line
   numbers available to the GDB debugger.
 
 - The 4 patch series "Enable hung_task and lockup cases to dump system
   info on demand" from Feng Tang adds a sysctl which can be used to cause
   additional info dumping when the hung-task and lockup detectors fire.
 
 - The 6 patch series "lib/base64: add generic encoder/decoder, migrate
   users" from Kuan-Wei Chiu adds a general base64 encoder/decoder to lib/
   and migrates several users away from their private implementations.
 
 - The 2 patch series "rbree: inline rb_first() and rb_last()" from Eric
   Dumazet makes TCP a little faster.
 
 - The 9 patch series "liveupdate: Rework KHO for in-kernel users" from
   Pasha Tatashin reworks the KEXEC Handover interfaces in preparation for
   Live Update Orchestrator (LUO), and possibly for other future clients.
 
 - The 13 patch series "kho: simplify state machine and enable dynamic
   updates" from Pasha Tatashin increases the flexibility of KEXEC
   Handover.  Also preparation for LUO.
 
 - The 18 patch series "Live Update Orchestrator" from Pasha Tatashin is
   a major new feature targeted at cloud environments.  Quoting the [0/N]:
 
     This series introduces the Live Update Orchestrator, a kernel subsystem
     designed to facilitate live kernel updates using a kexec-based reboot.
     This capability is critical for cloud environments, allowing hypervisors
     to be updated with minimal downtime for running virtual machines.  LUO
     achieves this by preserving the state of selected resources, such as
     memory, devices and their dependencies, across the kernel transition.
 
     As a key feature, this series includes support for preserving memfd file
     descriptors, which allows critical in-memory data, such as guest RAM or
     any other large memory region, to be maintained in RAM across the kexec
     reboot.
 
   Mike Rappaport merits a mention here, for his extensive review and
   testing work.
 
 - The 3 patch series "kexec: reorganize kexec and kdump sysfs" from
   Sourabh Jain moves the kexec and kdump sysfs entries from /sys/kernel/
   to /sys/kernel/kexec/ and adds back-compatibility symlinks which can
   hopefully be removed one day.
 
 - The 2 patch series "kho: fixes for vmalloc restoration" from Mike
   Rapoport fixes a BUG which was being hit during KHO restoration of
   vmalloc() regions.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTSAkQAKCRDdBJ7gKXxA
 jrkiAP9QKfsRv46XZaM5raScjY1ayjP+gqb2rgt6BQ/gZvb2+wD/cPAYOR6BiX52
 n0pVpQmG5P/KyOmpLztn96ejL4heKwQ=
 =JY96
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
   fixes a build issue and does some cleanup in ib/sys_info.c

 - "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
   enhances the 64-bit math code on behalf of a PWM driver and beefs up
   the test module for these library functions

 - "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
   makes BPF symbol names, sizes, and line numbers available to the GDB
   debugger

 - "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
   adds a sysctl which can be used to cause additional info dumping when
   the hung-task and lockup detectors fire

 - "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
   adds a general base64 encoder/decoder to lib/ and migrates several
   users away from their private implementations

 - "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
   makes TCP a little faster

 - "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
   reworks the KEXEC Handover interfaces in preparation for Live Update
   Orchestrator (LUO), and possibly for other future clients

 - "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
   increases the flexibility of KEXEC Handover. Also preparation for LUO

 - "Live Update Orchestrator" (Pasha Tatashin)
   is a major new feature targeted at cloud environments. Quoting the
   cover letter:

      This series introduces the Live Update Orchestrator, a kernel
      subsystem designed to facilitate live kernel updates using a
      kexec-based reboot. This capability is critical for cloud
      environments, allowing hypervisors to be updated with minimal
      downtime for running virtual machines. LUO achieves this by
      preserving the state of selected resources, such as memory,
      devices and their dependencies, across the kernel transition.

      As a key feature, this series includes support for preserving
      memfd file descriptors, which allows critical in-memory data, such
      as guest RAM or any other large memory region, to be maintained in
      RAM across the kexec reboot.

   Mike Rappaport merits a mention here, for his extensive review and
   testing work.

 - "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
   moves the kexec and kdump sysfs entries from /sys/kernel/ to
   /sys/kernel/kexec/ and adds back-compatibility symlinks which can
   hopefully be removed one day

 - "kho: fixes for vmalloc restoration" (Mike Rapoport)
   fixes a BUG which was being hit during KHO restoration of vmalloc()
   regions

* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
  calibrate: update header inclusion
  Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
  vmcoreinfo: track and log recoverable hardware errors
  kho: fix restoring of contiguous ranges of order-0 pages
  kho: kho_restore_vmalloc: fix initialization of pages array
  MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
  init: replace simple_strtoul with kstrtoul to improve lpj_setup
  KHO: fix boot failure due to kmemleak access to non-PRESENT pages
  Documentation/ABI: new kexec and kdump sysfs interface
  Documentation/ABI: mark old kexec sysfs deprecated
  kexec: move sysfs entries to /sys/kernel/kexec
  test_kho: always print restore status
  kho: free chunks using free_page() instead of kfree()
  selftests/liveupdate: add kexec test for multiple and empty sessions
  selftests/liveupdate: add simple kexec-based selftest for LUO
  selftests/liveupdate: add userspace API selftests
  docs: add documentation for memfd preservation via LUO
  mm: memfd_luo: allow preserving memfd
  liveupdate: luo_file: add private argument to store runtime state
  mm: shmem: export some functions to internal.h
  ...
 2025-12-06 14:01:20 -08:00
Linus Torvalds
416f99c3b1 Driver core changes for 6.19-rc1 
- Arch Topology:
   - Move parse_acpi_topology() from arm64 to common code for reuse in RISC-V
 
 - CPU:
   - Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
   - Print a newline (or 0x0A) instead of '(null)' reading
     /sys/devices/system/cpu/nohz_full when nohz_full= is not set
 
 - debugfs
   - Remove (broken) 'no-mount' mode
   - Remove redundant access mode checks in debugfs_get_tree() and
     debugfs_create_*() functions
 
 - Devres:
   - Remove unused devm_free_percpu() helper
   - Move devm_alloc_percpu() from device.h to devres.h
 
 - Firmware Loader:
   - Replace simple_strtol() with kstrtoint()
   - Do not call cancel_store() when no upload is in progress
 
 - kernfs:
   - Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
   - Fix a missing unwind path in __kernfs_new_node()
 
 - Misc:
   - Increase the name size in struct auxiliary_device_id to 40 characters
   - Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
     alloc_workqueue()
 
 - Platform:
   - Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap functions
 
 - Rust:
   - Auxiliary:
     - Unregister auxiliary device on parent device unbind
     - Move parent() to impl Device; implement device context aware parent() for
       Device<Bound>
     - Illustrate how to safely obtain a driver's device private data when
       calling from an auxiliary driver into the parant device driver
 
   - DebugFs:
     - Implement support for binary large objects
 
   - Device:
     - Let probe() return the driver's device private data as pinned initializer,
       i.e. impl PinInit<Self, Error>
     - Implement safe accessor for a driver's device private data for
       Device<Bound> (returned reference can't out-live driver binding and
       guarantees the correct private data type)
     - Implement AsBusDevice trait, to be used by class device abstractions to
       derive the bus device type of the parent device
 
   - DMA:
     - Store raw pointer of allocation as NonNull
     - Use start_ptr() and start_ptr_mut() to inherit correct mutability of self
 
   - FS:
     - Add file::Offset type alias
 
   - I2C:
     - Add abstractions for I2C device / driver infrastructure
     - Implement abstractions for manual I2C device registrations
 
   - I/O:
     - Use "kernel vertical" style for imports
     - Define ResourceSize as resource_size_t
     - Move ResourceSize to top-level I/O module
     - Add type alias for phys_addr_t
     - Implement Rust version of read_poll_timeout_atomic()
 
   - PCI:
     - Use "kernel vertical" style for imports
     - Move I/O and IRQ infrastructure to separate files
     - Add support for PCI interrupt vectors
     - Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert an
       IrqVector bound to specific pci::Device into an IrqRequest bound to the
       same pci::Device's parent Device
     - Leverage pin_init_scope() to get rid of redundant Result in IRQ methods
 
   - PinInit:
     - Add {pin_}init_scope() to execute code before creating an initializer
 
   - Platform:
     - Leverage pin_init_scope() to get rid of redundant Result in IRQ methods
 
   - Timekeeping:
     - Implement abstraction of udelay()
 
   - Uaccess:
     - Implement read_slice_partial() and read_slice_file() for UserSliceReader
     - Implement write_slice_partial() and write_slice_file() for UserSliceWriter
 
 - sysfs
   - Prepare the constification of struct attribute
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaTAehwAKCRBFlHeO1qrK
 LmzvAP0TWwKUGIduccknIa1AFvBM92lWVZptSysotv3SLFZq3wD9GBLIENt1DkEk
 s+GBqbobPgoyaodaysqLQ/SNqF9TcAM=
 =Wutw
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
 "Arch Topology:
   - Move parse_acpi_topology() from arm64 to common code for reuse in
     RISC-V

  CPU:
   - Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
   - Print a newline (or 0x0A) instead of '(null)' reading
     /sys/devices/system/cpu/nohz_full when nohz_full= is not set

  debugfs
   - Remove (broken) 'no-mount' mode
   - Remove redundant access mode checks in debugfs_get_tree() and
     debugfs_create_*() functions

  Devres:
   - Remove unused devm_free_percpu() helper
   - Move devm_alloc_percpu() from device.h to devres.h

  Firmware Loader:
   - Replace simple_strtol() with kstrtoint()
   - Do not call cancel_store() when no upload is in progress

  kernfs:
   - Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
   - Fix a missing unwind path in __kernfs_new_node()

  Misc:
   - Increase the name size in struct auxiliary_device_id to 40
     characters
   - Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
     alloc_workqueue()

  Platform:
   - Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
     functions

  Rust:
   - Auxiliary:
      - Unregister auxiliary device on parent device unbind
      - Move parent() to impl Device; implement device context aware
        parent() for Device<Bound>
      - Illustrate how to safely obtain a driver's device private data
        when calling from an auxiliary driver into the parant device
        driver

   - DebugFs:
      - Implement support for binary large objects

   - Device:
      - Let probe() return the driver's device private data as pinned
        initializer, i.e. impl PinInit<Self, Error>
      - Implement safe accessor for a driver's device private data for
        Device<Bound> (returned reference can't out-live driver binding
        and guarantees the correct private data type)
      - Implement AsBusDevice trait, to be used by class device
        abstractions to derive the bus device type of the parent device

   - DMA:
      - Store raw pointer of allocation as NonNull
      - Use start_ptr() and start_ptr_mut() to inherit correct
        mutability of self

   - FS:
      - Add file::Offset type alias

   - I2C:
      - Add abstractions for I2C device / driver infrastructure
      - Implement abstractions for manual I2C device registrations

   - I/O:
      - Use "kernel vertical" style for imports
      - Define ResourceSize as resource_size_t
      - Move ResourceSize to top-level I/O module
      - Add type alias for phys_addr_t
      - Implement Rust version of read_poll_timeout_atomic()

   - PCI:
      - Use "kernel vertical" style for imports
      - Move I/O and IRQ infrastructure to separate files
      - Add support for PCI interrupt vectors
      - Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
        an IrqVector bound to specific pci::Device into an IrqRequest
        bound to the same pci::Device's parent Device
      - Leverage pin_init_scope() to get rid of redundant Result in IRQ
        methods

   - PinInit:
      - Add {pin_}init_scope() to execute code before creating an
        initializer

   - Platform:
      - Leverage pin_init_scope() to get rid of redundant Result in IRQ
        methods

   - Timekeeping:
      - Implement abstraction of udelay()

   - Uaccess:
      - Implement read_slice_partial() and read_slice_file() for
        UserSliceReader
      - Implement write_slice_partial() and write_slice_file() for
        UserSliceWriter

  sysfs:
   - Prepare the constification of struct attribute"

* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
  rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
  debugfs: Fix default access mode config check
  debugfs: Remove broken no-mount mode
  debugfs: Remove redundant access mode checks
  driver core: Check drivers_autoprobe for all added devices
  driver core: WQ_PERCPU added to alloc_workqueue users
  driver core: replace use of system_unbound_wq with system_dfl_wq
  tick/nohz: Expose housekeeping CPUs in sysfs
  tick/nohz: avoid showing '(null)' if nohz_full= not set
  sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
  kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
  fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
  mod_devicetable: Bump auxiliary_device_id name size
  sysfs: simplify attribute definition macros
  samples/kobject: constify 'struct foo_attribute'
  samples/kobject: add is_visible() callback to attribute group
  sysfs: attribute_group: enable const variants of is_visible()
  sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
  sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
  sysfs: attribute_group: allow registration of const attribute
  ...
 2025-12-05 21:29:02 -08:00
Danilo Krummrich
473b9f3317 rust: pci: fix build failure when CONFIG_PCI_MSI is disabled 
When CONFIG_PCI_MSI is disabled pci_alloc_irq_vectors() and
pci_free_irq_vectors() are defined as inline functions and hence require
a Rust helper.

	error[E0425]: cannot find function `pci_alloc_irq_vectors` in crate `bindings`
	    --> rust/kernel/pci/irq.rs:144:23
	     |
	 144 | ...s::pci_alloc_irq_vectors(dev.as_raw(), min_vecs, max_vecs, irq_types.as_raw())
	     |       ^^^^^^^^^^^^^^^^^^^^^ help: a function with a similar name exists: `pci_irq_vector`
	     |
	    ::: .../rust/bindings/bindings_helpers_generated.rs:1197:5
	     |
	1197 |     pub fn pci_irq_vector(pdev: *mut pci_dev, nvec: ffi::c_uint) -> ffi::c_int;
	     |     --------------------------------------------------------------------------- similarly named function `pci_irq_vector` defined here

	error[E0425]: cannot find function `pci_free_irq_vectors` in crate `bindings`
	    --> rust/kernel/pci/irq.rs:170:28
	     |
	 170 |         unsafe { bindings::pci_free_irq_vectors(self.dev.as_raw()) };
	     |                            ^^^^^^^^^^^^^^^^^^^^ help: a function with a similar name exists: `pci_irq_vector`
	     |
	    ::: .../rust/bindings/bindings_helpers_generated.rs:1197:5
	     |
	1197 |     pub fn pci_irq_vector(pdev: *mut pci_dev, nvec: ffi::c_uint) -> ffi::c_int;
	     |     --------------------------------------------------------------------------- similarly named function `pci_irq_vector` defined here

	error: aborting due to 2 previous errors

Fix this by adding the corresponding helpers.

Fixes: 340ccc9735 ("rust: pci: Allocate and manage PCI interrupt vectors")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512012238.YgVvRRUx-lkp@intel.com/
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20251202210501.40998-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-12-04 00:24:47 +13:00
Eric Dumazet
94984bfed5 rbtree: inline rb_last() 
This is a very small function, inlining it saves cpu cycles in TCP by
reducing register pressure and removing call/ret overhead.

It also reduces vmlinux text size by 122 bytes on a typical x86_64 build.

Before:

size vmlinux
   text    data     bss     dec     hex filename
34811781        22177365        5685248 62674394        3bc55da vmlinux

After:

size vmlinux
   text	   data	    bss	    dec	    hex	filename
34811659	22177365	5685248	62674272	3bc5560	vmlinux

[ojeda@kernel.org: fix rust build]
  Link: https://lkml.kernel.org/r/20251120085518.1463498-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20251114140646.3817319-3-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-11-27 14:24:30 -08:00
Eric Dumazet
c2d2dad245 rbtree: inline rb_first() 
Patch series "rbree: inline rb_first() and rb_last()".

Inline these two small helpers, heavily used in TCP and FQ packet scheduler,
and in many other places.

This reduces kernel text size, and brings an 1.5 % improvement on network
TCP stress test.


This patch (of 2):

This is a very small function, inlining it saves cpu cycles by reducing
register pressure and removing call/ret overhead.

It also reduces vmlinux text size by 744 bytes on a typical x86_64 build.

Before:

size vmlinux
   text	   data	    bss	    dec	    hex	filename
34812525	22177365	5685248	62675138	3bc58c2	vmlinux

After:

size vmlinux
   text	   data	    bss	    dec	    hex	filename
34811781	22177365	5685248	62674394	3bc55da	vmlinux

[ojeda@kernel.org: fix rust build]
  Link: https://lkml.kernel.org/r/20251120085518.1463498-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20251114140646.3817319-1-edumazet@google.com
Link: https://lkml.kernel.org/r/20251114140646.3817319-2-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-11-27 14:24:30 -08:00
Yury Norov (NVIDIA)
d99dc586ca uaccess: decouple INLINE_COPY_FROM_USER and CONFIG_RUST 
Commit 1f9a8286bc ("uaccess: always export _copy_[from|to]_user with
CONFIG_RUST") exports _copy_{from,to}_user() unconditionally, if RUST is
enabled.  This pollutes exported symbols namespace, and spreads RUST
ifdefery in core files.

It's better to declare a corresponding helper under the rust/helpers,
similarly to how non-underscored copy_{from,to}_user() is handled.

[yury.norov@gmail.com: drop rust part of comment for _copy_from_user(), per Alice]
  Link: https://lkml.kernel.org/r/20251024154754.99768-1-yury.norov@gmail.com
Link: https://lkml.kernel.org/r/20251023171607.1171534-1-yury.norov@gmail.com
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-11-12 10:00:16 -08:00
Michal Wilczynski
7b3dce814a rust: pwm: Add Kconfig and basic data structures 
Introduce the foundational support for PWM abstractions in Rust.

This commit adds the `RUST_PWM_ABSTRACTIONS` Kconfig option to enable
the feature, along with the necessary build-system support and C
helpers.

It also introduces the first set of safe wrappers for the PWM
subsystem, covering the basic data carrying C structs and enums:
- `Polarity`: A safe wrapper for `enum pwm_polarity`.
- `Waveform`: A wrapper for `struct pwm_waveform`.
- `State`: A wrapper for `struct pwm_state`.

These types provide memory safe, idiomatic Rust representations of the
core PWM data structures and form the building blocks for the
abstractions that will follow.

Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://patch.msgid.link/20251016-rust-next-pwm-working-fan-for-sending-v16-2-a5df2405d2bd@samsung.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
 2025-11-07 10:03:54 +01:00
FUJITA Tomonori
ad68b55a9e rust: add udelay() function 
Add udelay() function, inserts a delay based on microseconds with busy
waiting, in preparation for supporting read_poll_timeout_atomic().

Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://patch.msgid.link/20251103112958.2961517-2-fujita.tomonori@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-11-04 13:25:29 +01:00
Greg Kroah-Hartman
9a55e00792 Revert "USB: disable rust bindings from the build for now" 
This reverts commit c584a1c7c8.

It brings the rust bindings for USB back into the build so that we can
work off of this for future kernel releases.

Link: https://lore.kernel.org/r/2025100827-divorcee-steadier-b40b@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2025-10-13 09:34:44 +02:00
Linus Torvalds
6093a688a0 Char/Misc/IIO/Binder changes for 6.18-rc1 
Here is the big set of char/misc/iio and other driver subsystem changes
 for 6.18-rc1.  Loads of different stuff in here, it was a busy
 development cycle in lots of different subsystems, with over 27k new
 lines added to the tree.  Included in here are:
   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems
   - MEI driver updates and additions
   - NVMEM driver updates
   - slimbus removal for an unused driver and some other minor
     updates
   - coresight driver updates and additions
   - MHI driver updates
   - comedi driver updates and fixes
   - extcon driver updates
   - interconnect driver additions
   - eeprom driver updates and fixes
   - minor UIO driver updates
   - tiny W1 driver updates
 
 But the majority of new code is in the rust bindings and additions,
 which includes:
   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.
   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here.  I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.
   - Android Binder driver implemented in Rust.  This is the big one, and
     was driving a huge majority of the rust binding work over the past
     years.  Right now there are 2 binder drivers in the kernel, selected
     only at build time as to which one to use as binder wants to be
     included in the system at boot time.  The binder C maintainers all
     agreed on this, as eventually, they want the C code to be removed from
     the tree, but it will take a few releases to get there while both
     are maintained to ensure that the rust implementation is fully
     stable and compliant with the existing userspace apis.
 
 All of these have been in linux-next for a while, with only minor merge
 issues showing up (you will hit them as well.)  Just accept both sides
 of the merge, it's just some header and include file lines, nothing
 major.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
 macHNv5/SjpAh7H5ssBU
 =cjWS
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...
 2025-10-04 16:26:32 -07:00
Linus Torvalds
8804d970fa Summary of significant series in this pull request: 
- The 3 patch series "mm, swap: improve cluster scan strategy" from
   Kairui Song improves performance and reduces the failure rate of swap
   cluster allocation.
 
 - The 4 patch series "support large align and nid in Rust allocators"
   from Vitaly Wool permits Rust allocators to set NUMA node and large
   alignment when perforning slub and vmalloc reallocs.
 
 - The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
   Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
   for virtual address spaces for ops-level DAMOS filters.
 
 - The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
   from Suren Baghdasaryan reduces mmap_lock contention during reads of
   /proc/pid/maps.
 
 - The 2 patch series "mm/mincore: minor clean up for swap cache
   checking" from Kairui Song performs some cleanup in the swap code.
 
 - The 11 patch series "mm: vm_normal_page*() improvements" from David
   Hildenbrand provides code cleanup in the pagemap code.
 
 - The 5 patch series "add persistent huge zero folio support" from
   Pankaj Raghav provides a block layer speedup by optionalls making the
   huge_zero_pagepersistent, instead of releasing it when its refcount
   falls to zero.
 
 - The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
   few touchups to the recently added Kexec Handover feature.
 
 - The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
   arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap.  To
   end the constant struggle with space shortage on 32-bit conflicting with
   64-bit's needs.
 
 - The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
   cleans up some swap code.
 
 - The 7 patch series "selftests/mm: Fix false positives and skip
   unsupported tests" from Donet Tom fixes a few things in our selftests
   code.
 
 - The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
   THPs when advised" from David Hildenbrand "allows individual processes
   to opt-out of THP=always into THP=madvise, without affecting other
   workloads on the system".
 
   It's a long story - the [1/N] changelog spells out the considerations.
 
 - The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
   gets us started on the memdesc project.  Please see
   https://kernelnewbies.org/MatthewWilcox/Memdescs and
   https://blogs.oracle.com/linux/post/introducing-memdesc.
 
 - The 3 patch series "Tiny optimization for large read operations" from
   Chi Zhiling improves the efficiency of the pagecache read path.
 
 - The 5 patch series "Better split_huge_page_test result check" from Zi
   Yan improves our folio splitting selftest code.
 
 - The 2 patch series "test that rmap behaves as expected" from Wei Yang
   adds some rmap selftests.
 
 - The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
   removes that function and converts its two remaining callers.
 
 - The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
   fixes some UFFD selftests issues.
 
 - The 3 patch series "introduce kernel file mapped folios" from Boris
   Burkov introduces the concept of "kernel file pages".  Using these
   permits btrfs to account its metadata pages to the root cgroup, rather
   than to the cgroups of random inappropriate tasks.
 
 - The 2 patch series "mm/pageblock: improve readability of some
   pageblock handling" from Wei Yang provides some readability improvements
   to the page allocator code.
 
 - The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
   Park teaches DAMON to understand arm32 highmem.
 
 - The 4 patch series "tools: testing: Use existing atomic.h for
   vma/maple tests" from Brendan Jackman performs some code cleanups and
   deduplication under tools/testing/.
 
 - The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
   Liam Howlett fixes a couple of 32-bit issues in
   tools/testing/radix-tree.c.
 
 - The 2 patch series "kasan: unify kasan_enabled() and remove
   arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
   arch-specific initialization code into a common arch-neutral
   implementation.
 
 - The 3 patch series "mm: remove zpool" from Johannes Weiner removes
   zspool - an indirection layer which now only redirects to a single thing
   (zsmalloc).
 
 - The 2 patch series "mm: task_stack: Stack handling cleanups" from
   Pasha Tatashin makes a couple of cleanups in the fork code.
 
 - The 37 patch series "mm: remove nth_page()" from David Hildenbrand
   makes rather a lot of adjustments at various nth_page() callsites,
   eventually permitting the removal of that undesirable helper function.
 
 - The 2 patch series "introduce kasan.write_only option in hw-tags" from
   Yeoreum Yun creates a KASAN read-only mode for ARM, using that
   architecture's memory tagging feature.  It is felt that a read-only mode
   KASAN is suitable for use in production systems rather than debug-only.
 
 - The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
   from Kefeng Wang does some tidying in the hugetlb folio allocation code.
 
 - The 12 patch series "mm: establish const-correctness for pointer
   parameters" from Max Kellermann makes quite a number of the MM API
   functions more accurate about the constness of their arguments.  This
   was getting in the way of subsystems (in this case CEPH) when they
   attempt to improving their own const/non-const accuracy.
 
 - The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
   fixes a number of code sites which were confused over when to use
   free_pages() vs __free_pages().
 
 - The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
   Ryhl makes the mapletree code accessible to Rust.  Required by nouveau
   and by its forthcoming successor: the new Rust Nova driver.
 
 - The 2 patch series "selftests/mm: split_huge_page_test:
   split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
   some cleanups to the thp selftesting code.
 
 - The 14 patch series "mm, swap: introduce swap table as swap cache
   (phase I)" from Chris Li and Kairui Song is the first step along the
   path to implementing "swap tables" - a new approach to swap allocation
   and state tracking which is expected to yield speed and space
   improvements.  This patchset itself yields a 5-20% performance benefit
   in some situations.
 
 - The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
   the new memdesc layer to clean up the ptdesc code a little.
 
 - The 3 patch series "Fix va_high_addr_switch.sh test failure" from
   Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
 
 - The 2 patch series "Minor fixes for memory allocation profiling" from
   Suren Baghdasaryan addresses a couple of minor issues in relatively new
   memory allocation profiling feature.
 
 - The 3 patch series "Small cleanups" from Matthew Wilcox has a few
   cleanups in preparation for more memdesc work.
 
 - The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
   DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
   furtherance of supporting arm highmem.
 
 - The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
   warnings" from Muhammad Anjum adds that compiler check to selftests code
   and fixes the fallout, by removing dead code.
 
 - The 10 patch series "Improvements to Victim Process Thawing and OOM
   Reaper Traversal Order" from zhongjinji makes a number of improvements
   in the OOM killer: mainly thawing a more appropriate group of victim
   threads so they can release resources.
 
 - The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
   from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
 
 - The 7 patch series "mm/damon: define and use DAMON initialization
   check function" from SeongJae Park implement reliability and
   maintainability improvements to a recently-added bug fix.
 
 - The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
   non-idle ages" from SeongJae Park provides additional transparency to
   userspace clients of the DAMON_STAT information.
 
 - The 2 patch series "Expand scope of khugepaged anonymous collapse"
   from Dev Jain removes some constraints on khubepaged's collapsing of
   anon VMAs.  It also increases the success rate of MADV_COLLAPSE against
   an anon vma.
 
 - The 2 patch series "mm: do not assume file == vma->vm_file in
   compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
   removal of file_operations.mmap().  This patchset concentrates upon
   clearing up the treatment of stacked filesystems.
 
 - The 6 patch series "mm: Improve mlock tracking for large folios" from
   Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
   of large folios.  /proc/meminfo's "Mlocked" field became more accurate.
 
 - The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
   during fork" from Donet Tom fixes several user-visible KSM stats
   inaccuracies across forks and adds selftest code to verify these
   counters.
 
 - The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
   Yang addresses some potential but presently benign issues in KSM's
   mm_slot handling.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
 jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
 2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
 =4mhY
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - "mm, swap: improve cluster scan strategy" from Kairui Song improves
   performance and reduces the failure rate of swap cluster allocation

 - "support large align and nid in Rust allocators" from Vitaly Wool
   permits Rust allocators to set NUMA node and large alignment when
   perforning slub and vmalloc reallocs

 - "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
   DAMOS_STAT's handling of the DAMON operations sets for virtual
   address spaces for ops-level DAMOS filters

 - "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
   Baghdasaryan reduces mmap_lock contention during reads of
   /proc/pid/maps

 - "mm/mincore: minor clean up for swap cache checking" from Kairui Song
   performs some cleanup in the swap code

 - "mm: vm_normal_page*() improvements" from David Hildenbrand provides
   code cleanup in the pagemap code

 - "add persistent huge zero folio support" from Pankaj Raghav provides
   a block layer speedup by optionalls making the
   huge_zero_pagepersistent, instead of releasing it when its refcount
   falls to zero

 - "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
   the recently added Kexec Handover feature

 - "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
   Stoakes turns mm_struct.flags into a bitmap. To end the constant
   struggle with space shortage on 32-bit conflicting with 64-bit's
   needs

 - "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
   code

 - "selftests/mm: Fix false positives and skip unsupported tests" from
   Donet Tom fixes a few things in our selftests code

 - "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
   from David Hildenbrand "allows individual processes to opt-out of
   THP=always into THP=madvise, without affecting other workloads on the
   system".

   It's a long story - the [1/N] changelog spells out the considerations

 - "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
   the memdesc project. Please see

      https://kernelnewbies.org/MatthewWilcox/Memdescs and
      https://blogs.oracle.com/linux/post/introducing-memdesc

 - "Tiny optimization for large read operations" from Chi Zhiling
   improves the efficiency of the pagecache read path

 - "Better split_huge_page_test result check" from Zi Yan improves our
   folio splitting selftest code

 - "test that rmap behaves as expected" from Wei Yang adds some rmap
   selftests

 - "remove write_cache_pages()" from Christoph Hellwig removes that
   function and converts its two remaining callers

 - "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
   selftests issues

 - "introduce kernel file mapped folios" from Boris Burkov introduces
   the concept of "kernel file pages". Using these permits btrfs to
   account its metadata pages to the root cgroup, rather than to the
   cgroups of random inappropriate tasks

 - "mm/pageblock: improve readability of some pageblock handling" from
   Wei Yang provides some readability improvements to the page allocator
   code

 - "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
   to understand arm32 highmem

 - "tools: testing: Use existing atomic.h for vma/maple tests" from
   Brendan Jackman performs some code cleanups and deduplication under
   tools/testing/

 - "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
   a couple of 32-bit issues in tools/testing/radix-tree.c

 - "kasan: unify kasan_enabled() and remove arch-specific
   implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
   initialization code into a common arch-neutral implementation

 - "mm: remove zpool" from Johannes Weiner removes zspool - an
   indirection layer which now only redirects to a single thing
   (zsmalloc)

 - "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
   couple of cleanups in the fork code

 - "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
   adjustments at various nth_page() callsites, eventually permitting
   the removal of that undesirable helper function

 - "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
   creates a KASAN read-only mode for ARM, using that architecture's
   memory tagging feature. It is felt that a read-only mode KASAN is
   suitable for use in production systems rather than debug-only

 - "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
   some tidying in the hugetlb folio allocation code

 - "mm: establish const-correctness for pointer parameters" from Max
   Kellermann makes quite a number of the MM API functions more accurate
   about the constness of their arguments. This was getting in the way
   of subsystems (in this case CEPH) when they attempt to improving
   their own const/non-const accuracy

 - "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
   code sites which were confused over when to use free_pages() vs
   __free_pages()

 - "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
   mapletree code accessible to Rust. Required by nouveau and by its
   forthcoming successor: the new Rust Nova driver

 - "selftests/mm: split_huge_page_test: split_pte_mapped_thp
   improvements" from David Hildenbrand adds a fix and some cleanups to
   the thp selftesting code

 - "mm, swap: introduce swap table as swap cache (phase I)" from Chris
   Li and Kairui Song is the first step along the path to implementing
   "swap tables" - a new approach to swap allocation and state tracking
   which is expected to yield speed and space improvements. This
   patchset itself yields a 5-20% performance benefit in some situations

 - "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
   layer to clean up the ptdesc code a little

 - "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
   issues in our 5-level pagetable selftesting code

 - "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
   addresses a couple of minor issues in relatively new memory
   allocation profiling feature

 - "Small cleanups" from Matthew Wilcox has a few cleanups in
   preparation for more memdesc work

 - "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
   Quanmin Yan makes some changes to DAMON in furtherance of supporting
   arm highmem

 - "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
   Anjum adds that compiler check to selftests code and fixes the
   fallout, by removing dead code

 - "Improvements to Victim Process Thawing and OOM Reaper Traversal
   Order" from zhongjinji makes a number of improvements in the OOM
   killer: mainly thawing a more appropriate group of victim threads so
   they can release resources

 - "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
   is a bunch of small and unrelated fixups for DAMON

 - "mm/damon: define and use DAMON initialization check function" from
   SeongJae Park implement reliability and maintainability improvements
   to a recently-added bug fix

 - "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
   SeongJae Park provides additional transparency to userspace clients
   of the DAMON_STAT information

 - "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
   some constraints on khubepaged's collapsing of anon VMAs. It also
   increases the success rate of MADV_COLLAPSE against an anon vma

 - "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
   from Lorenzo Stoakes moves us further towards removal of
   file_operations.mmap(). This patchset concentrates upon clearing up
   the treatment of stacked filesystems

 - "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
   provides some fixes and improvements to mlock's tracking of large
   folios. /proc/meminfo's "Mlocked" field became more accurate

 - "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
   Donet Tom fixes several user-visible KSM stats inaccuracies across
   forks and adds selftest code to verify these counters

 - "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
   some potential but presently benign issues in KSM's mm_slot handling

* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
  mm: swap: check for stable address space before operating on the VMA
  mm: convert folio_page() back to a macro
  mm/khugepaged: use start_addr/addr for improved readability
  hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
  alloc_tag: fix boot failure due to NULL pointer dereference
  mm: silence data-race in update_hiwater_rss
  mm/memory-failure: don't select MEMORY_ISOLATION
  mm/khugepaged: remove definition of struct khugepaged_mm_slot
  mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
  hugetlb: increase number of reserving hugepages via cmdline
  selftests/mm: add fork inheritance test for ksm_merging_pages counter
  mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
  drivers/base/node: fix double free in register_one_node()
  mm: remove PMD alignment constraint in execmem_vmalloc()
  mm/memory_hotplug: fix typo 'esecially' -> 'especially'
  mm/rmap: improve mlock tracking for large folios
  mm/filemap: map entire large folio faultaround
  mm/fault: try to map the entire file folio in finish_fault()
  mm/rmap: mlock large folios in try_to_unmap_one()
  mm/rmap: fix a mlock race condition in folio_referenced_one()
  ...
 2025-10-02 18:18:33 -07:00
Linus Torvalds
58809f614e drm next for 6.18-rc1 
cross-subsystem:
 - i2c-hid: Make elan touch controllers power on after panel is enabled
 - dt bindings for STM32MP25 SoC
 - pci vgaarb: use screen_info helpers
 - rust pin-init updates
 - add MEI driver for late binding firmware update/load
 
 uapi:
 - add ioctl for reassigning GEM handles
 - provide boot_display attribute on boot-up devices
 
 core:
 - document DRM_MODE_PAGE_FLIP_EVENT
 - add vendor specific recovery method to drm device wedged uevent
 
 gem:
 - Simplify gpuvm locking
 
 ttm:
 - add interface to populate buffers
 
 sched:
 - Fix race condition in trace code
 
 atomic:
 - Reallow no-op async page flips
 
 display:
 - dp: Fix command length
 
 video:
 - Improve pixel-format handling for struct screen_info
 
 rust:
 - drop Opaque<> from ioctl args
 - Alloc:
 - BorrowedPage type and AsPageIter traits
 - Implement Vmalloc::to_page() and VmallocPageIter
 - DMA/Scatterlist:
 - Add dma::DataDirection and type alias for dma_addr_t
 - Abstraction for struct scatterlist and sg_table
 - DRM:
 - simplify use of generics
 - add DriverFile type alias
 - drop Object::SIZE
 - Rust:
 - pin-init tree merge
 - Various methods for AsBytes and FromBytes traits
 
 gpuvm:
 - Support madvice in Xe driver
 
 gpusvm:
 - fix hmm_pfn_to_map_order usage in gpusvm
 
 bridge:
 - Improve and fix ref counting on bridge management
 - cdns-dsi: Various improvements to mode setting
 - Support Solomon SSD2825 plus DT bindings
 - Support Waveshare DSI2DPI plus DT bindings
 - Support Content Protection property
 - display-connector: Improve DP display detection
 - Add support for Radxa Ra620 plus DT bindings
 - adv7511: Provide SPD and HDMI infoframes
 - it6505: Replace crypto_shash with sha()
 - synopsys: Add support for DW DPTX Controller plus DT bindings
 - adv7511: Write full Audio infoframe
 - ite6263: Support vendor-specific infoframes
 - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
 
 panel:
 - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
   Support SHP LQ134Z1; Fixes
 - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
 - Support Samsung AMS561RA01
 - Support Hydis HV101HD1 plus DT bindings
 - ilitek-ili9881c: Refactor mode setting; Add support for Bestar
   BSD1218-A101KL68 LCD plus DT bindings
 - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
 - edp: Add support for additonal mt8189 Chromebook panels
 - lvds: Add DT bindings for EDT ETML0700Z8DHA
 
 amdgpu:
 - add CRIU support for gem objects
 - RAS updates
 - VCN SRAM load fixes
 - EDID read fixes
 - eDP ALPM support
 - Documentation updates
 - Rework PTE flag generation
 - DCE6 fixes
 - VCN devcoredump cleanup
 - MMHUB client id fixes
 - VCN 5.0.1 RAS support
 - SMU 13.0.x updates
 - Expanded PCIe DPC support
 - Expanded VCN reset support
 - VPE per queue reset support
 - give kernel jobs unique id for tracing
 - pre-populate exported buffers
 - cyan skillfish updates
 - make vbios build number available in sysfs
 - userq updates
 - HDCP updates
 - support MMIO remap page as ttm pool
 - JPEG parser updates
 - DCE6 DC updates
 - use devm for i2c buses
 - GPUVM locking updates
 - Drop non-DC DCE11 code
 - improve fallback handling for pixel encoding
 
 amdkfd:
 - SVM/page migration fixes
 - debugfs fixes
 - add CRIO support for gem objects
 - SVM updates
 
 radeon:
 - use dev_warn_once in CS parsers
 
 xe:
 - add madvise interface
 - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
   and memory attributes
 - drop L# bank mask reporting from media GT3 on Xe3+.
 - add SLPC power_profile sysfs interface
 - add configs attribs to add post/mid context-switch commands
 - handle firmware reported hardware errors notifying userspace with
   device wedged uevent
 - use same dir structure across sysfs/debugfs
 - cleanup and future proof vram region init
 - add G-states and PCI link states to debugfs
 - Add SRIOV support for CCS surfaces on Xe2+
 - Enable SRIOV PF mode by default on supported platforms
 - move flush to common code
 - extended core workarounds for Xe2/3
 - use DRM scheduler for delayed GT TLB invalidations
 - configs improvements and allow VF device enablement
 - prep work to expose mmio regions to userspace
 - VF migration support added
 - prepare GPU SVM for THP migration
 - start fixing XE_PAGE_SIZE vs PAGE_SIZE
 - add PSMI support for hw validation
 - resize VF bars to max possible size according to number of VFs
 - Ensure GT is in C0 during resume
 - pre-populate exported buffers
 - replace xe_hmm with gpusvm
 - add more SVM GT stats to debugfs
 - improve fake pci and WA kunnit handle for new platform testing
 - Test GuC to GuC comms to add debugging
 - use attribute groups to simplify sysfs registration
 - add Late Binding firmware code to interact with MEI
 
 i915:
 - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
 - protect against overflow in active_engine()
 - Use try_cmpxchg64() in __active_lookup()
 - include GuC registers in error state
 - get rid of dev->struct_mutex
 - iopoll: generalize read_poll_timout
 - lots more display refactoring
 - Reject HBR3 in any eDP Panel
 - Prune modes for YUV420
 - Display Wa fix, additions, and updates
 - DP: Fix 2.7 Gbps link training on g4x
 - DP: Adjust the idle pattern handling
 - DP: Shuffle the link training code a bit
 - Don't set/read the DSI C clock divider on GLK
 - Enable_psr kernel parameter changes
 - Type-C enabled/disconnected dp-alt sink
 - Wildcat Lake enabling
 - DP HDR updates
 - DRAM detection
 - wait PSR idle on dsb commit
 - Remove FBC modulo 4 restriction for ADL-P+
 - panic: refactor framebuffer allocation
 
 habanalabs:
 - debug/visibility improvements
 - vmalloc-backed coherent mmap support
 - HLDIO infrastructure
 
 nova-core:
 - various register!() macro improvements
 - minor vbios/firmware fixes/refactoring
 - advance firmware boot stages; process Booter and patch signatures
 - process GSP and GSP bootloader
 - Add r570.144 firmware bindings and update to it
 - Move GSP boot code to own module
 - Use new pin-init features to store driver's private data in a single
  allocation
 - Update ARef import from sync::aref
 
 nova-drm:
 - Update ARef import from sync::aref
 
 tyr:
 - initial driver skeleton for a rust driver for ARM Mali GPUs
 - capable of powering up, query metadata and provide it to userspace.
 
 msm:
 - GPU and Core:
 - in DT bindings describe clocks per GPU type
 - GMU bandwidth voting for x1-85
 - a623/a663 speedbins
 - cleanup some remaining no-iommu leftovers after VM_BIND conversion
 - fix GEM obj 32b size truncation
 - add missing VM_BIND param validation
 - IFPC for x1-85 and a750
 - register xml and gen_header.py sync from mesa
 - Display:
 - add missing bindings for display on SC8180X
 - added DisplayPort MST bindings
 - conversion from round_rate() to determine_rate()
 
 amdxdna:
 - add IOCTL_AMDXDNA_GET_ARRAY
 - support user space allocated buffers
 - streamline PM interfaces
 - Refactoring wrt. hardware contexts
 - improve error reporting
 
 nouveau:
 - use GSP firmware by default
 - improve error reporting
 - Pre-populate exported buffers
 
 ast:
 - Clean up detection of DRAM config
 
 exynos:
 - add DSIM bridge driver support for Exynos7870
 - Document Exynos7870 DSIM compatible in dt-binding
 
 panthor:
 - Print task/pid on errors
 - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
 - Improve cache flushing
 - Fail VM bind if BO has offset
 
 renesas:
 - convert to RUNTIME_PM_OPS
 
 rcar-du:
 - Make number of lanes configurable
 - Use RUNTIME_PM_OPS
 - Add support for DSI commands
 
 rocket:
 - Add driver for Rockchip NPU plus DT bindings
 - Use kfree() and sizeof() correctly
 - Test DMA status
 
 rockchip:
 - dsi2: Add support for RK3576 plus DT bindings
 - Add support for RK3588 DPTX output
 
 tidss:
 - Use crtc_ fields for programming display mode
 - Remove other drivers from aperture
 
 pixpaper:
 - Add support for Mayqueen Pixpaper plus DT bindings
 
 v3d:
 - Support querying nubmer of GPU resets for KHR_robustness
 
 stm:
 - Clean up logging
 - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
 
 sitronix:
 - st7571-i2c: Add support for inverted displays and 2-bit grayscale
 
 tidss:
 - Convert to kernel's FIELD_ macros
 
 vesadrm:
 - Support 8-bit palette mode
 
 imagination:
 - Improve power management
 - Add support for TH1520 GPU
 - Support Risc-V architectures
 
 v3d:
 - Improve job management and locking
 
 vkms:
 - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
 - Spport YUV with 16-bit components
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmjcpjkACgkQDHTzWXnE
 hr7Q7g/5AcxXqLUx7wvmDga9TpzIjDD+C+MOt568RpFQ9cYprI+/86ma7ELCpuNe
 dVgeobxQb/jyhf4acdBU+t5aZz+j8VPhPtIPrPY2kOVDuL1NfeQNS8VmGNpFhR+0
 6hqVrtfvbYdLBrAHrU/V/RwZlBJvI/D/I2QGuvZZwWzCBgYd4u4bGuRyBCvGDxOD
 CTPaEqYyzjvpVuzu7AGQk655WkZQnyPmiezIl2lit1meEMMMv80HePkyWHclZo7Q
 hMqsEasSp5w5Q5EpYqVr1z5IdBAV1O53oor9W573J3kEoB4o1zEsTPfLO4N1dgXo
 bfvc24uW3zyChWY2hWyRKvOzvAoClnjfY6whv9NRP0Qi4UjzhLlNOpmhm9cst/J+
 uj2Nn8UJtyvFJbTmDvoocpgdhq2mkGKdIVhVQ6tG7PjihFmyQRF7PJZjb+0Vee7L
 53F0c4d6HiBI4DHa+lH6fgQUBspIvSfmcnR0ACg29NByib+JEoPSPb4ET+uZ8lLd
 IbQvNiCdnUduYDCKfo5ea/FesP8AXy1KfSa+z7oEEFYHbbkc7PSztUagEyZdS/yS
 FnnYqmo/DidmyM4nxDQUII+UDqjng7fo+l4BzIhL12pR693KzCf0mexMr6SA24ny
 gasN97923OTle1J9xrPrKavkx6WjswZCvOaG7ZbnJB47ydJVu5w=
 =ZVKY
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "cross-subsystem:
   - i2c-hid: Make elan touch controllers power on after panel is
     enabled
   - dt bindings for STM32MP25 SoC
   - pci vgaarb: use screen_info helpers
   - rust pin-init updates
   - add MEI driver for late binding firmware update/load

  uapi:
   - add ioctl for reassigning GEM handles
   - provide boot_display attribute on boot-up devices

  core:
   - document DRM_MODE_PAGE_FLIP_EVENT
   - add vendor specific recovery method to drm device wedged uevent

  gem:
   - Simplify gpuvm locking

  ttm:
   - add interface to populate buffers

  sched:
   - Fix race condition in trace code

  atomic:
   - Reallow no-op async page flips

  display:
   - dp: Fix command length

  video:
   - Improve pixel-format handling for struct screen_info

  rust:
   - drop Opaque<> from ioctl args
   - Alloc:
       - BorrowedPage type and AsPageIter traits
       - Implement Vmalloc::to_page() and VmallocPageIter
   - DMA/Scatterlist:
       - Add dma::DataDirection and type alias for dma_addr_t
       - Abstraction for struct scatterlist and sg_table
   - DRM:
       - simplify use of generics
       - add DriverFile type alias
       - drop Object::SIZE
   - Rust:
       - pin-init tree merge
       - Various methods for AsBytes and FromBytes traits

  gpuvm:
   - Support madvice in Xe driver

  gpusvm:
   - fix hmm_pfn_to_map_order usage in gpusvm

  bridge:
   - Improve and fix ref counting on bridge management
   - cdns-dsi: Various improvements to mode setting
   - Support Solomon SSD2825 plus DT bindings
   - Support Waveshare DSI2DPI plus DT bindings
   - Support Content Protection property
   - display-connector: Improve DP display detection
   - Add support for Radxa Ra620 plus DT bindings
   - adv7511: Provide SPD and HDMI infoframes
   - it6505: Replace crypto_shash with sha()
   - synopsys: Add support for DW DPTX Controller plus DT bindings
   - adv7511: Write full Audio infoframe
   - ite6263: Support vendor-specific infoframes
   - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings

  panel:
   - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
     Support SHP LQ134Z1; Fixes
   - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
   - Support Samsung AMS561RA01
   - Support Hydis HV101HD1 plus DT bindings
   - ilitek-ili9881c: Refactor mode setting; Add support for Bestar
     BSD1218-A101KL68 LCD plus DT bindings
   - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
   - edp: Add support for additonal mt8189 Chromebook panels
   - lvds: Add DT bindings for EDT ETML0700Z8DHA

  amdgpu:
   - add CRIU support for gem objects
   - RAS updates
   - VCN SRAM load fixes
   - EDID read fixes
   - eDP ALPM support
   - Documentation updates
   - Rework PTE flag generation
   - DCE6 fixes
   - VCN devcoredump cleanup
   - MMHUB client id fixes
   - VCN 5.0.1 RAS support
   - SMU 13.0.x updates
   - Expanded PCIe DPC support
   - Expanded VCN reset support
   - VPE per queue reset support
   - give kernel jobs unique id for tracing
   - pre-populate exported buffers
   - cyan skillfish updates
   - make vbios build number available in sysfs
   - userq updates
   - HDCP updates
   - support MMIO remap page as ttm pool
   - JPEG parser updates
   - DCE6 DC updates
   - use devm for i2c buses
   - GPUVM locking updates
   - Drop non-DC DCE11 code
   - improve fallback handling for pixel encoding

  amdkfd:
   - SVM/page migration fixes
   - debugfs fixes
   - add CRIO support for gem objects
   - SVM updates

  radeon:
   - use dev_warn_once in CS parsers

  xe:
   - add madvise interface
   - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
     and memory attributes
   - drop L# bank mask reporting from media GT3 on Xe3+.
   - add SLPC power_profile sysfs interface
   - add configs attribs to add post/mid context-switch commands
   - handle firmware reported hardware errors notifying userspace with
     device wedged uevent
   - use same dir structure across sysfs/debugfs
   - cleanup and future proof vram region init
   - add G-states and PCI link states to debugfs
   - Add SRIOV support for CCS surfaces on Xe2+
   - Enable SRIOV PF mode by default on supported platforms
   - move flush to common code
   - extended core workarounds for Xe2/3
   - use DRM scheduler for delayed GT TLB invalidations
   - configs improvements and allow VF device enablement
   - prep work to expose mmio regions to userspace
   - VF migration support added
   - prepare GPU SVM for THP migration
   - start fixing XE_PAGE_SIZE vs PAGE_SIZE
   - add PSMI support for hw validation
   - resize VF bars to max possible size according to number of VFs
   - Ensure GT is in C0 during resume
   - pre-populate exported buffers
   - replace xe_hmm with gpusvm
   - add more SVM GT stats to debugfs
   - improve fake pci and WA kunnit handle for new platform testing
   - Test GuC to GuC comms to add debugging
   - use attribute groups to simplify sysfs registration
   - add Late Binding firmware code to interact with MEI

  i915:
   - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
   - protect against overflow in active_engine()
   - Use try_cmpxchg64() in __active_lookup()
   - include GuC registers in error state
   - get rid of dev->struct_mutex
   - iopoll: generalize read_poll_timout
   - lots more display refactoring
   - Reject HBR3 in any eDP Panel
   - Prune modes for YUV420
   - Display Wa fix, additions, and updates
   - DP: Fix 2.7 Gbps link training on g4x
   - DP: Adjust the idle pattern handling
   - DP: Shuffle the link training code a bit
   - Don't set/read the DSI C clock divider on GLK
   - Enable_psr kernel parameter changes
   - Type-C enabled/disconnected dp-alt sink
   - Wildcat Lake enabling
   - DP HDR updates
   - DRAM detection
   - wait PSR idle on dsb commit
   - Remove FBC modulo 4 restriction for ADL-P+
   - panic: refactor framebuffer allocation

  habanalabs:
   - debug/visibility improvements
   - vmalloc-backed coherent mmap support
   - HLDIO infrastructure

  nova-core:
   - various register!() macro improvements
   - minor vbios/firmware fixes/refactoring
   - advance firmware boot stages; process Booter and patch signatures
   - process GSP and GSP bootloader
   - Add r570.144 firmware bindings and update to it
   - Move GSP boot code to own module
   - Use new pin-init features to store driver's private data in a
     single allocation
   - Update ARef import from sync::aref

  nova-drm:
   - Update ARef import from sync::aref

  tyr:
   - initial driver skeleton for a rust driver for ARM Mali GPUs
   - capable of powering up, query metadata and provide it to userspace.

  msm:
   - GPU and Core:
      - in DT bindings describe clocks per GPU type
      - GMU bandwidth voting for x1-85
      - a623/a663 speedbins
      - cleanup some remaining no-iommu leftovers after VM_BIND conversion
      - fix GEM obj 32b size truncation
      - add missing VM_BIND param validation
      - IFPC for x1-85 and a750
      - register xml and gen_header.py sync from mesa
   - Display:
      - add missing bindings for display on SC8180X
      - added DisplayPort MST bindings
      - conversion from round_rate() to determine_rate()

  amdxdna:
   - add IOCTL_AMDXDNA_GET_ARRAY
   - support user space allocated buffers
   - streamline PM interfaces
   - Refactoring wrt. hardware contexts
   - improve error reporting

  nouveau:
   - use GSP firmware by default
   - improve error reporting
   - Pre-populate exported buffers

  ast:
   - Clean up detection of DRAM config

  exynos:
   - add DSIM bridge driver support for Exynos7870
   - Document Exynos7870 DSIM compatible in dt-binding

  panthor:
   - Print task/pid on errors
   - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
   - Improve cache flushing
   - Fail VM bind if BO has offset

  renesas:
   - convert to RUNTIME_PM_OPS

  rcar-du:
   - Make number of lanes configurable
   - Use RUNTIME_PM_OPS
   - Add support for DSI commands

  rocket:
   - Add driver for Rockchip NPU plus DT bindings
   - Use kfree() and sizeof() correctly
   - Test DMA status

  rockchip:
   - dsi2: Add support for RK3576 plus DT bindings
   - Add support for RK3588 DPTX output

  tidss:
   - Use crtc_ fields for programming display mode
   - Remove other drivers from aperture

  pixpaper:
   - Add support for Mayqueen Pixpaper plus DT bindings

  v3d:
   - Support querying nubmer of GPU resets for KHR_robustness

  stm:
   - Clean up logging
   - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings

  sitronix:
   - st7571-i2c: Add support for inverted displays and 2-bit grayscale

  tidss:
   - Convert to kernel's FIELD_ macros

  vesadrm:
   - Support 8-bit palette mode

  imagination:
   - Improve power management
   - Add support for TH1520 GPU
   - Support Risc-V architectures

  v3d:
   - Improve job management and locking

  vkms:
   - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
   - Spport YUV with 16-bit components"

* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
  drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
  drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
  drm/amdgpu: update MODULE_PARM_DESC for freesync_video
  drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
  drm/amd/display: Share dce100_validate_global with DCE6-8
  drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
  drm/amdgpu: Fix fence signaling race condition in userqueue
  amd/amdkfd: enhance kfd process check in switch partition
  amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
  drm/amd/display: Reject modes with too high pixel clock on DCE6-10
  drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
  drm/amd/display: Only enable common modes for eDP and LVDS
  drm/amdgpu: remove the redeclaration of variable i
  drm/amdgpu/userq: assign an error code for invalid userq va
  drm/amdgpu: revert "rework reserved VMID handling" v2
  drm/amdgpu: remove leftover from enforcing isolation by VMID
  drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
  accel/habanalabs: add Infineon version check
  accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
  accel/habanalabs: add HL_GET_P_STATE passthrough type
  ...
 2025-10-02 12:47:25 -07:00
Linus Torvalds
77633c77ee bitmap-for-6.18 
Bits-related paches for 6.17:
  - FIELD_PREP_WM16() consolidation (Nicolas);
  - bitmaps for Rust (Burak);
  - __fls() fix for arc (Kees).
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmja3TMACgkQsUSA/Tof
 vshf2wv/fuqPq6ZQZGxrC+YKGrTKjAx6sFpYLqZoCgp1K4zgwFwYO3RG1KwlEsS5
 a+OAOeR7y73JfKHHBd1WBFnZFz/Vv8A18ah0XDKko/Ufy7jSHJ0Nu1RAofSGjqUW
 Pv34NCAmcvMB+gg4oDtmHlx/4FFFsSCqi4PdYTrnRMst7gEdhrQH95WL/DrhVnKt
 fen6NAsNLtlgJXCTghp8dU4ZkZ+V1iez4i81oxoWpPVxAptS2nrsCrkUzA1l1OpK
 X/OKW/I3O6vjmRNHW6Bq1WzgIlxyOrqb8iYAI8QLYSeuviLcbpGwQbfwD3IgsQjP
 TuRvfSVEiX2YZEbYn15VSb+hD9+IUi+XonJzTTNoKpIhINMkj/Z0jApMkGqQgcII
 IhyN+BNB2R9zqbatLkXwEQpuLFM7rxHRR03O0xfoDG6m9vOx9+LFlM/BqzJ7FWzQ
 kCRbrjSuoiIGFb1a8wqhZDh1jbgX8kj0t3cYsyWhA82Jt7XMckbTrWRICWSOfvXb
 QAJd72xT
 =Z/BH
 -----END PGP SIGNATURE-----

Merge tag 'bitmap-for-6.18' of https://github.com/norov/linux

Pull bitmap updates from Yury Norov:

 - FIELD_PREP_WM16() consolidation (Nicolas)

 - bitmaps for Rust (Burak)

 - __fls() fix for arc (Kees)

* tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits)
  rust: add dynamic ID pool abstraction for bitmap
  rust: add find_bit_benchmark_rust module.
  rust: add bitmap API.
  rust: add bindings for bitops.h
  rust: add bindings for bitmap.h
  phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
  clk: sp7021: switch to FIELD_PREP_WM16 macro
  PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
  PCI: rockchip: Switch to FIELD_PREP_WM16* macros
  net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
  ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
  drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
  phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
  drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
  drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
  phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
  drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
  drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
  phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
  drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
  ...
 2025-10-02 08:57:03 -07:00
Linus Torvalds
ad6657804c regulator: Updates for v6.18 
This is a very quiet release for regulator, almost all the changes are
 new drivers but we do also have some improvements for the Rust bindings.
 
  - Additional APIs added to the Rust bindings.
  - Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133 and
    SpacemiT P1.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjaaAQACgkQJNaLcl1U
 h9BrVQf9FfsEXB3H3+L9m0ZGfbjOuxAtz/tdQKyroHK5R0AVz9ggpzWyKjrl38p6
 fXQgWCcUdak/OjBlh/a2oiCmmJIO3KosPY34rinFErWg1vTBkjsMcT+7K9IdYTlq
 H9+gMQKBD/zViX1X+qm1rZ9BLNGYuSotvbSETYleAFv46jPYGDOlLsCo2LPHX9lh
 NLmBYZDqgtul0gl4S2n82rT2LAw9Omdy0ooNOvDQDrEQo/ovFpQ1XTScrlKLQomv
 eZ0U2zhtbGTa6s86SMG37TKAsUtPmmGpUvxApilzwLkXaO04/7Fp0944wTAlynCE
 LHSdp7rhmOBvRVczejqV83+4kAzM5Q==
 =XSA0
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is a very quiet release for regulator, almost all the changes are
  new drivers but we do also have some improvements for the Rust
  bindings.

   - Additional APIs added to the Rust bindings

   - Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
     and SpacemiT P1"

* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
  regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
  regulator: Fix MAX77838 selection
  regulator: spacemit: support SpacemiT P1 regulators
  regulator: max77838: add max77838 regulator driver
  dt-bindings: regulator: document max77838 pmic
  rust: regulator: add devm_enable and devm_enable_optional
  rust: regulator: remove Regulator<Dynamic>
  regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
  regulator: pf530x: Add a driver for the NXP PF5300 Regulator
  regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
  regulator: scmi: Use int type to store negative error codes
  regulator: core: Remove redundant ternary operators
  rust: regulator: use `to_result` for error handling
  regulator: consumer.rst: document bulk operations
  regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
  regulator: bd718x7: Use kcalloc() instead of kzalloc()
  regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
  regulator: remove unneeded 'fast_io' parameter in regmap_config
  regulator: rt5133: Add RT5133 PMIC regulator Support
  regulator: dt-bindings: Add Richtek RT5133 Support
  ...
 2025-10-01 11:43:54 -07:00
Linus Torvalds
eb3289fc47 Driver core changes for 6.18-rc1 
- Auxiliary:
    - Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
    - Optimize logic of auxiliary_match_id()
 
 - Rust:
   - Auxiliary:
     - Use primitive C types from prelude
 
   - DebugFs:
     - Add debugfs support for simple read/write files and custom callbacks
       through a File-type-based and directory-scope-based API
     - Sample driver code for the File-type-based API
     - Sample module code for the directory-scope-based API
 
   - I/O:
     - Add io::poll module and implement Rust specific read_poll_timeout()
       helper
 
   - IRQ:
     - Implement support for threaded and non-threaded device IRQs based on
       (&Device<Bound>, IRQ number) tuples (IrqRequest)
     - Provide &Device<Bound> cookie in IRQ handlers
 
   - PCI:
     - Support IRQ requests from IRQ vectors for a specific pci::Device<Bound>
     - Implement accessors for subsystem IDs, revision, devid and resource start
     - Provide dedicated pci::Vendor and pci::Class types for vendor and class
       ID numbers
     - Implement Display to print actual vendor and class names; Debug to print
       the raw ID numbers
     - Add pci::DeviceId::from_class_and_vendor() helper
     - Use primitive C types from prelude
     - Various minor inline and (safety) comment improvements
 
   - Platform:
     - Support IRQ requests from IRQ vectors for a specific
       platform::Device<Bound>
 
   - Nova:
     - Use pci::DeviceId::from_class_and_vendor() to avoid probing
       non-display/compute PCI functions
 
   - Misc:
     - Add helper for cpu_relax()
     - Update ARef import from sync::aref
 
 - sysfs:
   - Remove bin_attrs_new field from struct attribute_group
   - Remove read_new() and write_new() from struct bin_attribute
 
 - Misc:
   - Document potential race condition in get_dev_from_fwnode()
   - Constify node_group argument in software node registration functions
   - Fix order of kernel-doc parameters in various functions
   - Set power.no_pm flag for faux devices
   - Set power.no_callbacks flag along with the power.no_pm flag
   - Constify the pmu_bus bus type
   - Minor spelling fixes
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaNmQGwAKCRBFlHeO1qrK
 LmPzAP9msIvK8eFT4CEDK4buX1gd+VBOdy8mAjAeJ2F80FIo8wEAtOdddNaaqWVF
 m4ac2/a2bSRKMGPX+wIM7d2HGyC7sgY=
 =XbU+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
 "Auxiliary:
   - Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
   - Optimize logic of auxiliary_match_id()

  Rust:
   - Auxiliary:
      - Use primitive C types from prelude

   - DebugFs:
      - Add debugfs support for simple read/write files and custom
        callbacks through a File-type-based and directory-scope-based
        API
      - Sample driver code for the File-type-based API
      - Sample module code for the directory-scope-based API

   - I/O:
      - Add io::poll module and implement Rust specific
        read_poll_timeout() helper

   - IRQ:
      - Implement support for threaded and non-threaded device IRQs
        based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
      - Provide &Device<Bound> cookie in IRQ handlers

   - PCI:
      - Support IRQ requests from IRQ vectors for a specific
        pci::Device<Bound>
      - Implement accessors for subsystem IDs, revision, devid and
        resource start
      - Provide dedicated pci::Vendor and pci::Class types for vendor
        and class ID numbers
      - Implement Display to print actual vendor and class names; Debug
        to print the raw ID numbers
      - Add pci::DeviceId::from_class_and_vendor() helper
      - Use primitive C types from prelude
      - Various minor inline and (safety) comment improvements

   - Platform:
      - Support IRQ requests from IRQ vectors for a specific
        platform::Device<Bound>

   - Nova:
      - Use pci::DeviceId::from_class_and_vendor() to avoid probing
        non-display/compute PCI functions

   - Misc:
      - Add helper for cpu_relax()
      - Update ARef import from sync::aref

  sysfs:
   - Remove bin_attrs_new field from struct attribute_group
   - Remove read_new() and write_new() from struct bin_attribute

  Misc:
   - Document potential race condition in get_dev_from_fwnode()
   - Constify node_group argument in software node registration
     functions
   - Fix order of kernel-doc parameters in various functions
   - Set power.no_pm flag for faux devices
   - Set power.no_callbacks flag along with the power.no_pm flag
   - Constify the pmu_bus bus type
   - Minor spelling fixes"

* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
  rust: pci: display symbolic PCI vendor names
  rust: pci: display symbolic PCI class names
  rust: pci: fix incorrect platform reference in PCI driver probe doc comment
  rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
  perf: make pmu_bus const
  samples: rust: Add scoped debugfs sample driver
  rust: debugfs: Add support for scoped directories
  samples: rust: Add debugfs sample driver
  rust: debugfs: Add support for callback-based files
  rust: debugfs: Add support for writable files
  rust: debugfs: Add support for read-only files
  rust: debugfs: Add initial support for directories
  driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
  driver core: auxiliary bus: Drop dev_pm_domain_detach() call
  driver core: Fix order of the kernel-doc parameters
  driver core: get_dev_from_fwnode(): document potential race
  drivers: base: fix "publically"->"publicly"
  driver core/PM: Set power.no_callbacks along with power.no_pm
  driver core: faux: Set power.no_pm for faux devices
  rust: pci: inline several tiny functions
  ...
 2025-10-01 08:39:23 -07:00
Greg Kroah-Hartman
c584a1c7c8 USB: disable rust bindings from the build for now 
The rust USB bindings as submitted are a good start, but they don't
really seem to be correct in a number of minor places, so just disable
them from the build entirely at this point in time.  When they are ready
to be re-enabled, this commit can be reverted.

Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2025-09-25 14:53:47 +02:00
Daniel Almeida
e7e2296b0e rust: usb: add basic USB abstractions 
Add basic USB abstractions, consisting of usb::{Device, Interface,
Driver, Adapter, DeviceId} and the module_usb_driver macro. This is the
first step in being able to write USB device drivers, which paves the
way for USB media drivers - for example - among others.

This initial support will then be used by a subsequent sample driver,
which constitutes the only user of the USB abstractions so far.

Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-1-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2025-09-24 13:13:04 +02:00
Burak Emir
6cf93a9ed3 rust: add bindings for bitops.h 
Makes atomic set_bit and clear_bit inline functions as well as the
non-atomic variants __set_bit and __clear_bit available to Rust.
Adds a new MAINTAINERS section BITOPS API BINDINGS [RUST].

Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
 2025-09-22 15:52:44 -04:00
Burak Emir
0452b4ab29 rust: add bindings for bitmap.h 
Makes the bitmap_copy_and_extend inline function available to Rust.
Adds F: to existing MAINTAINERS section BITMAP API BINDINGS [RUST].

-

Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
 2025-09-22 15:52:44 -04:00
Alice Ryhl
da939ef4c4 rust: maple_tree: add MapleTree 
Patch series "Add Rust abstraction for Maple Trees", v3.

This will be used in the Tyr driver [1] to allocate from the GPU's VA
space that is not owned by userspace, but by the kernel, for kernel GPU
mappings.

Danilo tells me that in nouveau, the maple tree is used for keeping track
of "VM regions" on top of GPUVM, and that he will most likely end up doing
the same in the Rust Nova driver as well.

These abstractions intentionally do not expose any way to make use of
external locking.  You are required to use the internal spinlock.  For
now, we do not support loads that only utilize rcu for protection.

This contains some parts taken from Andrew Ballance's RFC [2] from April. 
However, it has also been reworked significantly compared to that RFC
taking the use-cases in Tyr into account.


This patch (of 3):

The maple tree will be used in the Tyr driver to allocate and keep track
of GPU allocations created internally (i.e.  not by userspace).  It will
likely also be used in the Nova driver eventually.

This adds the simplest methods for additional and removal that do not
require any special care with respect to concurrency.

This implementation is based on the RFC by Andrew but with significant
changes to simplify the implementation.

[ojeda@kernel.org: fix intra-doc links]
  Link: https://lkml.kernel.org/r/20250910140212.997771-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-0-fb5c8958fb1e@google.com
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-1-fb5c8958fb1e@google.com
Link: https://lore.kernel.org/r/20250627-tyr-v1-1-cb5f4c6ced46@collabora.com [1]
Link: https://lore.kernel.org/r/20250405060154.1550858-1-andrewjballance@gmail.com [2]
Co-developed-by: Andrew Ballance <andrewjballance@gmail.com>
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Almeida <daniel.almeida@collabora.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-09-21 14:22:19 -07:00
Alice Ryhl
eafedbc7c0 rust_binder: add Rust Binder driver 
We're generally not proponents of rewrites (nasty uncomfortable things
that make you late for dinner!). So why rewrite Binder?

Binder has been evolving over the past 15+ years to meet the evolving
needs of Android. Its responsibilities, expectations, and complexity
have grown considerably during that time. While we expect Binder to
continue to evolve along with Android, there are a number of factors
that currently constrain our ability to develop/maintain it. Briefly
those are:

1. Complexity: Binder is at the intersection of everything in Android and
   fulfills many responsibilities beyond IPC. It has become many things
   to many people, and due to its many features and their interactions
   with each other, its complexity is quite high. In just 6kLOC it must
   deliver transactions to the right threads. It must correctly parse
   and translate the contents of transactions, which can contain several
   objects of different types (e.g., pointers, fds) that can interact
   with each other. It controls the size of thread pools in userspace,
   and ensures that transactions are assigned to threads in ways that
   avoid deadlocks where the threadpool has run out of threads. It must
   track refcounts of objects that are shared by several processes by
   forwarding refcount changes between the processes correctly.  It must
   handle numerous error scenarios and it combines/nests 13 different
   locks, 7 reference counters, and atomic variables. Finally, It must
   do all of this as fast and efficiently as possible. Minor performance
   regressions can cause a noticeably degraded user experience.

2. Things to improve: Thousand-line functions [1], error-prone error
   handling [2], and confusing structure can occur as a code base grows
   organically. After more than a decade of development, this codebase
   could use an overhaul.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n2896
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/android/binder.c?h=v6.5#n3658

3. Security critical: Binder is a critical part of Android's sandboxing
   strategy. Even Android's most de-privileged sandboxes (e.g. the
   Chrome renderer, or SW Codec) have direct access to Binder. More than
   just about any other component, it's important that Binder provide
   robust security, and itself be robust against security
   vulnerabilities.

It's #1 (high complexity) that has made continuing to evolve Binder and
resolving #2 (tech debt) exceptionally difficult without causing #3
(security issues). For Binder to continue to meet Android's needs, we
need better ways to manage (and reduce!) complexity without increasing
the risk.

The biggest change is obviously the choice of programming language. We
decided to use Rust because it directly addresses a number of the
challenges within Binder that we have faced during the last years. It
prevents mistakes with ref counting, locking, bounds checking, and also
does a lot to reduce the complexity of error handling. Additionally,
we've been able to use the more expressive type system to encode the
ownership semantics of the various structs and pointers, which takes the
complexity of managing object lifetimes out of the hands of the
programmer, reducing the risk of use-after-frees and similar problems.

Rust has many different pointer types that it uses to encode ownership
semantics into the type system, and this is probably one of the most
important aspects of how it helps in Binder. The Binder driver has a lot
of different objects that have complex ownership semantics; some
pointers own a refcount, some pointers have exclusive ownership, and
some pointers just reference the object and it is kept alive in some
other manner. With Rust, we can use a different pointer type for each
kind of pointer, which enables the compiler to enforce that the
ownership semantics are implemented correctly.

Another useful feature is Rust's error handling. Rust allows for more
simplified error handling with features such as destructors, and you get
compilation failures if errors are not properly handled. This means that
even though Rust requires you to spend more lines of code than C on
things such as writing down invariants that are left implicit in C, the
Rust driver is still slightly smaller than C binder: Rust is 5.5kLOC and
C is 5.8kLOC. (These numbers are excluding blank lines, comments,
binderfs, and any debugging facilities in C that are not yet implemented
in the Rust driver. The numbers include abstractions in rust/kernel/
that are unlikely to be used by other drivers than Binder.)

Although this rewrite completely rethinks how the code is structured and
how assumptions are enforced, we do not fundamentally change *how* the
driver does the things it does. A lot of careful thought has gone into
the existing design. The rewrite is aimed rather at improving code
health, structure, readability, robustness, security, maintainability
and extensibility. We also include more inline documentation, and
improve how assumptions in the code are enforced. Furthermore, all
unsafe code is annotated with a SAFETY comment that explains why it is
correct.

We have left the binderfs filesystem component in C. Rewriting it in
Rust would be a large amount of work and requires a lot of bindings to
the file system interfaces. Binderfs has not historically had the same
challenges with security and complexity, so rewriting binderfs seems to
have lower value than the rest of Binder.

Correctness and feature parity
------------------------------

Rust binder passes all tests that validate the correctness of Binder in
the Android Open Source Project. We can boot a device, and run a variety
of apps and functionality without issues. We have performed this both on
the Cuttlefish Android emulator device, and on a Pixel 6 Pro.

As for feature parity, Rust binder currently implements all features
that C binder supports, with the exception of some debugging facilities.
The missing debugging facilities will be added before we submit the Rust
implementation upstream.

Tracepoints
-----------

I did not include all of the tracepoints as I felt that the mechansim
for making C access fields of Rust structs should be discussed on list
separately. I also did not include the support for building Rust Binder
as a module since that requires exporting a bunch of additional symbols
on the C side.

Original RFC Link with old benchmark numbers:
	https://lore.kernel.org/r/20231101-rust-binder-v1-0-08ba9197f637@google.com

Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250919-rust-binder-v2-1-a384b09f28dd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2025-09-19 09:40:46 +02:00
Gary Guo
bb38f35b35 rust: implement kernel::sync::Refcount 
This is a wrapping layer of `include/linux/refcount.h`. Currently the
kernel refcount has already been used in `Arc`, however it calls into
FFI directly.

[boqun: Add the missing <> for the link in comment]
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/r/20250723233312.3304339-2-gary@kernel.org
 2025-09-15 09:38:35 +02:00
Boqun Feng
d9ea5a41ce rust: sync: Add memory barriers 
Memory barriers are building blocks for concurrent code, hence provide
a minimal set of them.

The compiler barrier, barrier(), is implemented in inline asm instead of
using core::sync::atomic::compiler_fence() because memory models are
different: kernel's atomics are implemented in inline asm therefore the
compiler barrier should be implemented in inline asm as well. Also it's
currently only public to the kernel crate until there's a reasonable
driver usage.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Link: https://lore.kernel.org/all/20250719030827.61357-10-boqun.feng@gmail.com/
 2025-09-15 09:38:34 +02:00
Boqun Feng
fdd7c7e0d2 rust: Introduce atomic API helpers 
In order to support LKMM atomics in Rust, add rust_helper_* for atomic
APIs. These helpers ensure the implementation of LKMM atomics in Rust is
the same as in C. This could save the maintenance burden of having two
similar atomic implementations in asm.

Originally-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/20250719030827.61357-2-boqun.feng@gmail.com/
 2025-09-15 09:38:32 +02:00
Vitaly Wool
1738796994 rust: support large alignments in allocations 
Add support for large (> PAGE_SIZE) alignments in Rust allocators.  All
the preparations on the C side are already done, we just need to add
bindings for <alloc>_node_align() functions and start using those.

Link: https://lkml.kernel.org/r/20250806125552.1727073-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-09-13 16:54:46 -07:00
Vitaly Wool
7760b6421b rust: add support for NUMA ids in allocations 
Add a new type to support specifying NUMA identifiers in Rust allocators
and extend the allocators to have NUMA id as a parameter.  Thus, modify
ReallocFunc to use the new extended realloc primitives from the C side of
the kernel (i.e.  k[v]realloc_node_align/vrealloc_node_align) and add the
new function alloc_node to the Allocator trait while keeping the existing
one (alloc) for backward compatibility.

This will allow to specify node to use for allocation of e.  g.  {KV}Box,
as well as for future NUMA aware users of the API.

[ojeda@kernel.org: fix missing import needed for `rusttest`]
  Link: https://lkml.kernel.org/r/20250816210214.2729269-1-ojeda@kernel.org
Link: https://lkml.kernel.org/r/20250806125522.1726992-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2025-09-13 16:54:46 -07:00
Daniel Almeida
2e0fd4583d
 		rust: regulator: add devm_enable and devm_enable_optional 
A lot of drivers only care about enabling the regulator for as long as
the underlying Device is bound. This can be easily observed due to the
extensive use of `devm_regulator_get_enable` and
`devm_regulator_get_enable_optional` throughout the kernel.

Therefore, make this helper available in Rust. Also add an example
noting how it should be the default API unless the driver needs more
fine-grained control over the regulator.

Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20250910-regulator-remove-dynamic-v3-2-07af4dfa97cc@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
 2025-09-10 21:02:16 +01:00
Danilo Krummrich
05aa6fb1c2 rust: scatterlist: Add abstraction for sg_table 
Add a safe Rust abstraction for the kernel's scatter-gather list
facilities (`struct scatterlist` and `struct sg_table`).

This commit introduces `SGTable<T>`, a wrapper that uses a generic
parameter to provide compile-time guarantees about ownership and lifetime.

The abstraction provides two primary states:
- `SGTable<Owned<P>>`: Represents a table whose resources are fully
  managed by Rust. It takes ownership of a page provider `P`, allocates
  the underlying `struct sg_table`, maps it for DMA, and handles all
  cleanup automatically upon drop. The DMA mapping's lifetime is tied to
  the associated device using `Devres`, ensuring it is correctly unmapped
  before the device is unbound.
- `SGTable<Borrowed>` (or just `SGTable`): A zero-cost representation of
  an externally managed `struct sg_table`. It is created from a raw
  pointer using `SGTable::from_raw()` and provides a lifetime-bound
  reference (`&'a SGTable`) for operations like iteration.

The API exposes a safe iterator that yields `&SGEntry` references,
allowing drivers to easily access the DMA address and length of each
segment in the list.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250828133323.53311-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-09-04 23:33:50 +02:00
FUJITA Tomonori
842aedc390 rust: Add cpu_relax() helper 
Add cpu_relax() helper in preparation for supporting
read_poll_timeout().

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250821002055.3654160-2-fujita.tomonori@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-08-21 16:58:07 +02:00
Alistair Popple
b6a37d1d46 rust: Add several miscellaneous PCI helpers 
Add bindings to obtain a PCI device's resource start address, bus/
device function, revision ID and subsystem device and vendor IDs.

These will be used by the nova-core GPU driver which is currently in
development.

Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <lossin@kernel.org>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/r/20250730013417.640593-2-apopple@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-08-15 20:25:42 +02:00
Daniel Almeida
9b6d4fb980 rust: pci: add irq accessors 
These accessors can be used to retrieve a irq::Registration or a
irq::ThreadedRegistration from a pci device. Alternatively, drivers can
retrieve an IrqRequest from a bound PCI device for later use.

These accessors ensure that only valid IRQ lines can ever be registered.

Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-6-0485dcd9bcbf@collabora.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-08-12 20:33:33 +02:00
Daniel Almeida
0851d34a8c rust: irq: add support for non-threaded IRQs and handlers 
This patch adds support for non-threaded IRQs and handlers through
irq::Registration and the irq::Handler trait.

Registering an irq is dependent upon having a IrqRequest that was
previously allocated by a given device. This will be introduced in
subsequent patches.

Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250811-topics-tyr-request_irq2-v9-3-0485dcd9bcbf@collabora.com
[ Remove expect(dead_code) from Flags::into_inner(), add
  expect(dead_code) to IrqRequest::new(), fix intra-doc links. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
 2025-08-12 20:22:00 +02:00
Linus Torvalds
352af6a011 Rust changes for v6.17 
Toolchain and infrastructure:
 
  - Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
    'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and 'ref_as_ptr'.
 
    These are intended to avoid type casts with the 'as' operator, which
    are quite powerful, into restricted variants that are less powerful
    and thus should help to avoid mistakes.
 
  - Remove the 'author' key now that most instances were moved to the
    plural one in the previous cycle.
 
 'kernel' crate:
 
  - New 'bug' module: add 'warn_on!' macro which reuses the existing
    'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
    kernel parameters:
 
        warn_on!(value == 42);
 
    To avoid duplicating the assembly code, the same strategy is followed
    as for the static branch code in order to share the assembly between
    both C and Rust. This required a few rearrangements on C arch headers
    -- the existing C macros should still generate the same outputs, thus
    no functional change expected there.
 
  - 'workqueue' module: add delayed work items, including a 'DelayedWork'
    struct, a 'impl_has_delayed_work!' macro and an 'enqueue_delayed'
    method, e.g.:
 
        /// Enqueue the struct for execution on the system workqueue,
        /// where its value will be printed 42 jiffies later.
        fn print_later(value: Arc<MyStruct>) {
            let _ = workqueue::system().enqueue_delayed(value, 42);
        }
 
  - New 'bits' module: add support for 'bit' and 'genmask' functions,
    with runtime- and compile-time variants, e.g.:
 
        static_assert!(0b00010000 == bit_u8(4));
        static_assert!(0b00011110 == genmask_u8(1..=4));
 
        assert!(checked_bit_u32(u32::BITS).is_none());
 
  - 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which reads
    NUL-terminated strings from userspace into a '&CStr'.
 
    Introduce 'UserPtr' newtype, similar in purpose to '__user' in C, to
    minimize mistakes handling userspace pointers, including mixing them
    up with integers and leaking them via the 'Debug' trait. Add it to
    the prelude, too.
 
  - Start preparations for the replacement of our custom 'CStr' type
    with the analogous type in the 'core' standard library. This will
    take place across several cycles to make it easier. For this one,
    it includes a new 'fmt' module, using upstream method names and some
    other cleanups.
 
    Replace 'fmt!' with a re-export, which helps Clippy lint properly,
    and clean up the found 'uninlined-format-args' instances.
 
  - 'dma' module:
 
    - Clarify wording and be consistent in 'coherent' nomenclature.
 
    - Convert the 'read!()' and 'write!()' macros to return a 'Result'.
 
    - Add 'as_slice()', 'write()' methods in 'CoherentAllocation'.
 
    - Expose 'count()' and 'size()' in 'CoherentAllocation' and add the
      corresponding type invariants.
 
    - Implement 'CoherentAllocation::dma_handle_with_offset()'.
 
  - 'time' module:
 
    - Make 'Instant' generic over clock source. This allows the compiler
      to assert that arithmetic expressions involving the 'Instant' use
      'Instants' based on the same clock source.
 
    - Make 'HrTimer' generic over the timer mode. 'HrTimer' timers take a
      'Duration' or an 'Instant' when setting the expiry time, depending
      on the timer mode. With this change, the compiler can check the
      type matches the timer mode.
 
    - Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
      function that will select an appropriate sleep method depending on
      the requested sleep time.
 
    - Avoid 64-bit divisions on 32-bit hardware when calculating
      timestamps.
 
    - Seal the 'HrTimerMode' trait. This prevents users of the
      'HrTimerMode' from implementing the trait on their own types.
 
    - Pass the correct timer mode ID to 'hrtimer_start_range_ns()'.
 
  - 'list' module: remove 'OFFSET' constants, allowing to remove pointer
    arithmetic; now 'impl_list_item!' invokes 'impl_has_list_links!' or
    'impl_has_list_links_self_ptr!'. Other simplifications too.
 
  - 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
    constant, which avoids exposing the type of the opaque pointer, and
    require 'into_foreign' to return non-null.
 
    Remove the 'Either<L, R>' type as well. It is unused, and we want to
    encourage the use of custom enums for concrete use cases.
 
  - 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
    to allow them to be used in generic APIs.
 
  - 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
     and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'.
 
  - 'Opaque' type: add 'cast_from' method to perform a restricted cast
    that cannot change the inner type and use it in callers of
    'container_of!'. Rename 'raw_get' to 'cast_into' to match it.
 
  - 'rbtree' module: add 'is_empty' method.
 
  - 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
    'ARef', which are moved from the too general 'types' module which we
    want to reduce or eventually remove. Also fix a safety comment in
    'static_lock_class'.
 
 'pin-init' crate:
 
  - Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are now
    (pin-)initializers.
 
  - Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'.
 
  - New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
    it via 'Zeroable::zeroed()'.
 
  - Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
    'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for '"Rust"'
    and '"C"' ABIs and up to 20 arguments.
 
  - Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
    [Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'.
 
  - Renamed 'zeroed()' to 'init_zeroed()'.
 
  - Upstream dev news: improve CI more to deny warnings, use
    '--all-targets'. Check the synchronization status of the two '-next'
    branches in upstream and the kernel.
 
 MAINTAINERS:
 
  - Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
    Stoakes as reviewers (thanks everyone).
 
 And a few other cleanups and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmiOWREACgkQGXyLc2ht
 IW39Ig/9E0ExSiBgNKdkCOaULMq31wAxnu3iWoVVisFndlh/Inv+JlaLrmA57BCi
 xXgBwVZ1GoMsG8Fzt6gT+gyhGYi8waNd+5KXr/WJZVTaJ9v1KpdvxuCnSz0DjCbk
 GaKfAfxvJ5GAOEwiIIX8X0TFu6kx911DCJY387/VrqZQ7Msh1QSM3tcZeir/EV4w
 lPjUdlOh1FnLJLI9CGuW20d1IhQUP7K3pdoywgJPpCZV0I8QCyMlMqCEael8Tw2S
 r/PzRaQtiIzk5HTx06V8paK+nEn0K2vQXqW2kV56Y6TNm1Zcv6dES/8hCITsISs2
 nwney3vXEwvoZX+YkQRffZddY4i6YenWMrtLgVxZzdshBL3bn6eHqBL04Nfix+p7
 pQe3qMH3G8UBtX1lugBE7RrWGWcz9ARN8sK12ClmpAUnKJOwTpo97kpqXP7pDme8
 Buh/oV3voAMsqwooSbVBzuUUWnbGaQ5Oj6CiiosSadfNh6AxJLYLKHtRLKJHZEw3
 0Ob/1HhoWS6JSvYKVjMyD19qcH7O8ThZE+83CfMAkI4KphXJarWhpSmN4cHkFn/v
 0clQ7Y5m+up9v1XWTaEq0Biqa6CaxLQwm/qW5WU0Y/TiovmvxAFdCwsQqDkRoJNx
 9kNfMJRvNl78KQxrjEDz9gl7/ajgqX1KkqP8CQbGjv29cGzFlVE=
 =5Wt9
 -----END PGP SIGNATURE-----

Merge tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux

Pull Rust updates from Miguel Ojeda:
 "Toolchain and infrastructure:

   - Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
     'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
     'ref_as_ptr'

     These are intended to avoid type casts with the 'as' operator,
     which are quite powerful, into restricted variants that are less
     powerful and thus should help to avoid mistakes

   - Remove the 'author' key now that most instances were moved to the
     plural one in the previous cycle

  'kernel' crate:

   - New 'bug' module: add 'warn_on!' macro which reuses the existing
     'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
     kernel parameters:

         warn_on!(value == 42);

     To avoid duplicating the assembly code, the same strategy is
     followed as for the static branch code in order to share the
     assembly between both C and Rust

     This required a few rearrangements on C arch headers -- the
     existing C macros should still generate the same outputs, thus no
     functional change expected there

   - 'workqueue' module: add delayed work items, including a
     'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
     'enqueue_delayed' method, e.g.:

         /// Enqueue the struct for execution on the system workqueue,
         /// where its value will be printed 42 jiffies later.
         fn print_later(value: Arc<MyStruct>) {
             let _ = workqueue::system().enqueue_delayed(value, 42);
         }

   - New 'bits' module: add support for 'bit' and 'genmask' functions,
     with runtime- and compile-time variants, e.g.:

         static_assert!(0b00010000 == bit_u8(4));
         static_assert!(0b00011110 == genmask_u8(1..=4));

         assert!(checked_bit_u32(u32::BITS).is_none());

   - 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
     reads NUL-terminated strings from userspace into a '&CStr'

     Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
     to minimize mistakes handling userspace pointers, including mixing
     them up with integers and leaking them via the 'Debug' trait. Add
     it to the prelude, too

   - Start preparations for the replacement of our custom 'CStr' type
     with the analogous type in the 'core' standard library. This will
     take place across several cycles to make it easier. For this one,
     it includes a new 'fmt' module, using upstream method names and
     some other cleanups

     Replace 'fmt!' with a re-export, which helps Clippy lint properly,
     and clean up the found 'uninlined-format-args' instances

   - 'dma' module:

      - Clarify wording and be consistent in 'coherent' nomenclature

      - Convert the 'read!()' and 'write!()' macros to return a 'Result'

      - Add 'as_slice()', 'write()' methods in 'CoherentAllocation'

      - Expose 'count()' and 'size()' in 'CoherentAllocation' and add
        the corresponding type invariants

      - Implement 'CoherentAllocation::dma_handle_with_offset()'

   - 'time' module:

      - Make 'Instant' generic over clock source. This allows the
        compiler to assert that arithmetic expressions involving the
        'Instant' use 'Instants' based on the same clock source

      - Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
        take a 'Duration' or an 'Instant' when setting the expiry time,
        depending on the timer mode. With this change, the compiler can
        check the type matches the timer mode

      - Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
        function that will select an appropriate sleep method depending
        on the requested sleep time

      - Avoid 64-bit divisions on 32-bit hardware when calculating
        timestamps

      - Seal the 'HrTimerMode' trait. This prevents users of the
        'HrTimerMode' from implementing the trait on their own types

      - Pass the correct timer mode ID to 'hrtimer_start_range_ns()'

   - 'list' module: remove 'OFFSET' constants, allowing to remove
     pointer arithmetic; now 'impl_list_item!' invokes
     'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
     simplifications too

   - 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
     constant, which avoids exposing the type of the opaque pointer, and
     require 'into_foreign' to return non-null

     Remove the 'Either<L, R>' type as well. It is unused, and we want
     to encourage the use of custom enums for concrete use cases

   - 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
     to allow them to be used in generic APIs

   - 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
     and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'

   - 'Opaque' type: add 'cast_from' method to perform a restricted cast
     that cannot change the inner type and use it in callers of
     'container_of!'. Rename 'raw_get' to 'cast_into' to match it

   - 'rbtree' module: add 'is_empty' method

   - 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
     'ARef', which are moved from the too general 'types' module which
     we want to reduce or eventually remove. Also fix a safety comment
     in 'static_lock_class'

  'pin-init' crate:

   - Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
     now (pin-)initializers

   - Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'

   - New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
     it via 'Zeroable::zeroed()'

   - Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
     'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
     '"Rust"' and '"C"' ABIs and up to 20 arguments

   - Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
     [Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'

   - Renamed 'zeroed()' to 'init_zeroed()'

   - Upstream dev news: improve CI more to deny warnings, use
     '--all-targets'. Check the synchronization status of the two
     '-next' branches in upstream and the kernel

  MAINTAINERS:

   - Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
     Stoakes as reviewers (thanks everyone)

  And a few other cleanups and improvements"

* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
  rust: Add warn_on macro
  arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
  riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
  x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
  rust: kernel: move ARef and AlwaysRefCounted to sync::aref
  rust: sync: fix safety comment for `static_lock_class`
  rust: types: remove `Either<L, R>`
  rust: kernel: use `core::ffi::CStr` method names
  rust: str: add `CStr` methods matching `core::ffi::CStr`
  rust: str: remove unnecessary qualification
  rust: use `kernel::{fmt,prelude::fmt!}`
  rust: kernel: add `fmt` module
  rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
  scripts: rust: emit path candidates in panic message
  scripts: rust: replace length checks with match
  rust: list: remove nonexistent generic parameter in link
  rust: bits: add support for bits/genmask macros
  rust: list: remove OFFSET constants
  rust: list: add `impl_list_item!` examples
  rust: list: use fully qualified path
  ...
 2025-08-03 13:49:10 -07:00
Linus Torvalds
bf76f23aa1 Scheduler updates for v6.17: 
Core scheduler changes:
 
  - Better tracking of maximum lag of tasks in presence of different
    slices duration, for better handling of lag in the fair
    scheduler. (Vincent Guittot)
 
  - Clean up and standardize #if/#else/#endif markers throughout
    the entire scheduler code base (Ingo Molnar)
 
  - Make SMP unconditional: build the SMP scheduler's
    data structures and logic on UP kernel too, even though
    they are not used, to simplify the scheduler and remove
    around 200 #ifdef/[#else]/#endif blocks from the
    scheduler. (Ingo Molnar)
 
  - Reorganize cgroup bandwidth control interface handling
    for better interfacing with sched_ext (Tejun Heo)
 
 Balancing:
 
  - Bump sd->max_newidle_lb_cost when newidle balance fails (Chris Mason)
  - Remove sched_domain_topology_level::flags to simplify the code (Prateek Nayak)
  - Simplify and clean up build_sched_topology() (Li Chen)
  - Optimize build_sched_topology() on large machines (Li Chen)
 
 Real-time scheduling:
 
  - Add initial version of proxy execution: a mechanism for mutex-owning
    tasks to inherit the scheduling context of higher priority waiters.
    Currently limited to a single runqueue and conditional on CONFIG_EXPERT,
    and other limitations. (John Stultz, Peter Zijlstra, Valentin Schneider)
 
  - Deadline scheduler (Juri Lelli):
 
    - Fix dl_servers initialization order (Juri Lelli)
    - Fix DL scheduler's root domain reinitialization logic (Juri Lelli)
    - Fix accounting bugs after global limits change (Juri Lelli)
    - Fix scalability regression by implementing less agressive dl_server handling
      (Peter Zijlstra)
 
 PSI:
 
  - Improve scalability by optimizing psi_group_change() cpu_clock() usage
    (Peter Zijlstra)
 
 Rust changes:
 
  - Make Task, CondVar and PollCondVar methods inline to avoid unnecessary
    function calls (Kunwu Chan, Panagiotis Foliadis)
 
  - Add might_sleep() support for Rust code: Rust's "#[track_caller]"
    mechanism is used so that Rust's might_sleep() doesn't need to be
    defined as a macro (Fujita Tomonori)
 
  - Introduce file_from_location() (Boqun Feng)
 
 Debugging & instrumentation:
 
  - Make clangd usable with scheduler source code files again (Peter Zijlstra)
 
  - tools: Add root_domains_dump.py which dumps root domains info (Juri Lelli)
 
  - tools: Add dl_bw_dump.py for printing bandwidth accounting info (Juri Lelli)
 
 Misc cleanups & fixes:
 
  - Remove play_idle() (Feng Lee)
 
  - Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
 
  - Do not call __put_task_struct() on RT if pi_blocked_on is set
    (Luis Claudio R. Goncalves)
 
  - Correct the comment in place_entity() (wang wei)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmiHHNIRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1g7DhAAg9aMW33PuC24A4hCS1XQay6j3rgmR5qC
 AOqDofj/CY4Q374HQtOl4m5CYZB/G5csRv6TZliWQKhAy9vr6VWddoyOMJYOAlAx
 XRurl1Z3MriOMD6DPgNvtHd5PrR5Un8ygALgT+32d0PRz27KNXORW5TyvEf2Bv4r
 BX4/GazlOlK0PdGUdZl0q/3dtkU4Wr5IifQzT8KbarOSBbNwZwVcg+83hLW5gJMx
 LgMGLaAATmiN7VuvJWNDATDfEOmOvQOu8veoS8TuP1AOVeJPfPT2JVh9Jen5V1/5
 3w1RUOkUI2mQX+cujWDW3koniSxjsA1OegXfHnFkF5BXp4q5e54k6D5sSh1xPFDX
 iDhkU5jsbKkkJS2ulD6Vi4bIAct3apMl4IrbJn/OYOLcUVI8WuunHs4UPPEuESAS
 TuQExKSdj4Ntrzo3pWEy8kX3/Z9VGa+WDzwsPUuBSvllB5Ir/jjKgvkxPA6zGsiY
 rbkmZT8qyI01IZ/GXqfI2AQYCGvgp+SOvFPi755ZlELTQS6sUkGZH2/2M5XnKA9t
 Z1wB2iwttoS1VQInx0HgiiAGrXrFkr7IzSIN2T+CfWIqilnL7+nTxzwlJtC206P4
 DB97bF6azDtJ6yh1LetRZ1ZMX/Gr56Cy0Z6USNoOu+a12PLqlPk9+fPBBpkuGcdy
 BRk8KgysEuk=
 =8T0v
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Core scheduler changes:

   - Better tracking of maximum lag of tasks in presence of different
     slices duration, for better handling of lag in the fair scheduler
     (Vincent Guittot)

   - Clean up and standardize #if/#else/#endif markers throughout the
     entire scheduler code base (Ingo Molnar)

   - Make SMP unconditional: build the SMP scheduler's data structures
     and logic on UP kernel too, even though they are not used, to
     simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
     blocks from the scheduler (Ingo Molnar)

   - Reorganize cgroup bandwidth control interface handling for better
     interfacing with sched_ext (Tejun Heo)

  Balancing:

   - Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
     Mason)

   - Remove sched_domain_topology_level::flags to simplify the code
     (Prateek Nayak)

   - Simplify and clean up build_sched_topology() (Li Chen)

   - Optimize build_sched_topology() on large machines (Li Chen)

  Real-time scheduling:

   - Add initial version of proxy execution: a mechanism for
     mutex-owning tasks to inherit the scheduling context of higher
     priority waiters.

     Currently limited to a single runqueue and conditional on
     CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
     Valentin Schneider)

   - Deadline scheduler (Juri Lelli):
      - Fix dl_servers initialization order (Juri Lelli)
      - Fix DL scheduler's root domain reinitialization logic (Juri
        Lelli)
      - Fix accounting bugs after global limits change (Juri Lelli)
      - Fix scalability regression by implementing less agressive
        dl_server handling (Peter Zijlstra)

  PSI:

   - Improve scalability by optimizing psi_group_change() cpu_clock()
     usage (Peter Zijlstra)

  Rust changes:

   - Make Task, CondVar and PollCondVar methods inline to avoid
     unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)

   - Add might_sleep() support for Rust code: Rust's "#[track_caller]"
     mechanism is used so that Rust's might_sleep() doesn't need to be
     defined as a macro (Fujita Tomonori)

   - Introduce file_from_location() (Boqun Feng)

  Debugging & instrumentation:

   - Make clangd usable with scheduler source code files again (Peter
     Zijlstra)

   - tools: Add root_domains_dump.py which dumps root domains info (Juri
     Lelli)

   - tools: Add dl_bw_dump.py for printing bandwidth accounting info
     (Juri Lelli)

  Misc cleanups & fixes:

   - Remove play_idle() (Feng Lee)

   - Fix check_preemption_disabled() (Sebastian Andrzej Siewior)

   - Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
     Claudio R. Goncalves)

   - Correct the comment in place_entity() (wang wei)"

* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  sched/idle: Remove play_idle()
  sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
  sched: Start blocked_on chain processing in find_proxy_task()
  sched: Fix proxy/current (push,pull)ability
  sched: Add an initial sketch of the find_proxy_task() function
  sched: Fix runtime accounting w/ split exec & sched contexts
  sched: Move update_curr_task logic into update_curr_se
  locking/mutex: Add p->blocked_on wrappers for correctness checks
  locking/mutex: Rework task_struct::blocked_on
  sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
  sched/topology: Remove sched_domain_topology_level::flags
  x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
  x86/smpboot: moves x86_topology to static initialize and truncate
  x86/smpboot: remove redundant CONFIG_SCHED_SMT
  smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
  tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
  tools/sched: Add root_domains_dump.py which dumps root domains info
  sched/deadline: Fix accounting after global limits change
  sched/deadline: Reset extra_bw to max_bw when clearing root domains
  sched/deadline: Initialize dl_servers after SMP
  ...
 2025-07-29 17:42:52 -07:00
Linus Torvalds
22c5696e3f Driver core changes for 6.17-rc1 
- DEBUGFS
 
   - Remove unneeded debugfs_file_{get,put}() instances
 
   - Remove last remnants of debugfs_real_fops()
 
   - Allow storing non-const void * in struct debugfs_inode_info::aux
 
 - SYSFS
 
   - Switch back to attribute_group::bin_attrs (treewide)
 
   - Switch back to bin_attribute::read()/write() (treewide)
 
   - Constify internal references to 'struct bin_attribute'
 
 - Support cache-ids for device-tree systems
 
   - Add arch hook arch_compact_of_hwid()
 
   - Use arch_compact_of_hwid() to compact MPIDR values on arm64
 
 - Rust
 
   - Device
 
     - Introduce CoreInternal device context (for bus internal methods)
 
     - Provide generic drvdata accessors for bus devices
 
     - Provide Driver::unbind() callbacks
 
     - Use the infrastructure above for auxiliary, PCI and platform
 
     - Implement Device::as_bound()
 
     - Rename Device::as_ref() to Device::from_raw() (treewide)
 
     - Implement fwnode and device property abstractions
 
       - Implement example usage in the Rust platform sample driver
 
   - Devres
 
     - Remove the inner reference count (Arc) and use pin-init instead
 
     - Replace Devres::new_foreign_owned() with devres::register()
 
     - Require T to be Send in Devres<T>
 
     - Initialize the data kept inside a Devres last
 
     - Provide an accessor for the Devres associated Device
 
   - Device ID
 
     - Add support for ACPI device IDs and driver match tables
 
     - Split up generic device ID infrastructure
 
     - Use generic device ID infrastructure in net::phy
 
   - DMA
 
     - Implement the dma::Device trait
 
     - Add DMA mask accessors to dma::Device
 
     - Implement dma::Device for PCI and platform devices
 
     - Use DMA masks from the DMA sample module
 
   - I/O
 
     - Implement abstraction for resource regions (struct resource)
 
     - Implement resource-based ioremap() abstractions
 
     - Provide platform device accessors for I/O (remap) requests
 
   - Misc
 
     - Support fallible PinInit types in Revocable
 
     - Implement Wrapper<T> for Opaque<T>
 
     - Merge pin-init blanket dependencies (for Devres)
 
 - Misc
 
   - Fix OF node leak in auxiliary_device_create()
 
   - Use util macros in device property iterators
 
   - Improve kobject sample code
 
   - Add device_link_test() for testing device link flags
 
   - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
 
   - Hint to prefer container_of_const() over container_of()
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
 LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
 iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
 =jgRj
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
 "debugfs:
   - Remove unneeded debugfs_file_{get,put}() instances
   - Remove last remnants of debugfs_real_fops()
   - Allow storing non-const void * in struct debugfs_inode_info::aux

  sysfs:
   - Switch back to attribute_group::bin_attrs (treewide)
   - Switch back to bin_attribute::read()/write() (treewide)
   - Constify internal references to 'struct bin_attribute'

  Support cache-ids for device-tree systems:
   - Add arch hook arch_compact_of_hwid()
   - Use arch_compact_of_hwid() to compact MPIDR values on arm64

  Rust:
   - Device:
       - Introduce CoreInternal device context (for bus internal methods)
       - Provide generic drvdata accessors for bus devices
       - Provide Driver::unbind() callbacks
       - Use the infrastructure above for auxiliary, PCI and platform
       - Implement Device::as_bound()
       - Rename Device::as_ref() to Device::from_raw() (treewide)
       - Implement fwnode and device property abstractions
       - Implement example usage in the Rust platform sample driver
   - Devres:
       - Remove the inner reference count (Arc) and use pin-init instead
       - Replace Devres::new_foreign_owned() with devres::register()
       - Require T to be Send in Devres<T>
       - Initialize the data kept inside a Devres last
       - Provide an accessor for the Devres associated Device
   - Device ID:
       - Add support for ACPI device IDs and driver match tables
       - Split up generic device ID infrastructure
       - Use generic device ID infrastructure in net::phy
   - DMA:
       - Implement the dma::Device trait
       - Add DMA mask accessors to dma::Device
       - Implement dma::Device for PCI and platform devices
       - Use DMA masks from the DMA sample module
   - I/O:
       - Implement abstraction for resource regions (struct resource)
       - Implement resource-based ioremap() abstractions
       - Provide platform device accessors for I/O (remap) requests
   - Misc:
       - Support fallible PinInit types in Revocable
       - Implement Wrapper<T> for Opaque<T>
       - Merge pin-init blanket dependencies (for Devres)

  Misc:
   - Fix OF node leak in auxiliary_device_create()
   - Use util macros in device property iterators
   - Improve kobject sample code
   - Add device_link_test() for testing device link flags
   - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
   - Hint to prefer container_of_const() over container_of()"

* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
  rust: io: fix broken intra-doc links to `platform::Device`
  rust: io: fix broken intra-doc link to missing `flags` module
  rust: io: mem: enable IoRequest doc-tests
  rust: platform: add resource accessors
  rust: io: mem: add a generic iomem abstraction
  rust: io: add resource abstraction
  rust: samples: dma: set DMA mask
  rust: platform: implement the `dma::Device` trait
  rust: pci: implement the `dma::Device` trait
  rust: dma: add DMA addressing capabilities
  rust: dma: implement `dma::Device` trait
  rust: net::phy Change module_phy_driver macro to use module_device_table macro
  rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
  rust: device_id: split out index support into a separate trait
  device: rust: rename Device::as_ref() to Device::from_raw()
  arm64: cacheinfo: Provide helper to compress MPIDR value into u32
  cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
  cacheinfo: Set cache 'id' based on DT data
  container_of: Document container_of() is not to be used in new code
  driver core: auxiliary bus: fix OF node leak
  ...
 2025-07-29 12:15:39 -07:00