-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmqCLGoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJzYH/0SFjcgnk1Z3Km+3
2kEeGAMETajW41W7+5QQkuHk83UXDxigDRoD857/d8utK90GrZAoTMS9/6zF3tra
ht4G1yc2x7/xgVLkWii54d/sp1LEWTRDntN95fzYZwbeAXwd0AcYBlKXZYHKl4t/
4yZCgYPmYTkewaYdbyWNPiZvCwhBUl5k1E9i/drh5IJXdgXRcqoO86FY9JX+Ks9x
r0g+d6RIiSbDfwzgRpkBn0TRnqzh2OeBfgyrsgGZO2axwlKcA7SP0vwwT6c6nOUI
s8F2xXrqrUI75JbSI4YbdwOSvktwbtkz83idlRAYBOdxof3LJ6i2YaxrT8iG+KUH
l7+e18M=
=eQMh
-----END PGP SIGNATURE-----
BackMerge tag 'v7.2' into drm-next
Linux 7.2
There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Revert fair scheduler patches and mark fair policy as experimental due
to reported regressions.
- Fix OOB read in connector/hdmi infoframe.
- Handle invalid scaling parameters and empty messages in log target.
- Skip attempting to populate unmapped pages in amdxdna.
-----BEGIN PGP SIGNATURE-----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=Stgd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-08-13' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.3:
- Revert fair scheduler patches and mark fair policy as experimental due
to reported regressions.
- Fix OOB read in connector/hdmi infoframe.
- Handle invalid scaling parameters and empty messages in log target.
- Skip attempting to populate unmapped pages in amdxdna.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/a9b38792-bdd0-42da-a46a-7a048c26c0c2@linux.intel.com
If a valid signature is seen at the default offset, use the default
size/offset for discovery.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5447
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 46a0df99a0)
Cc: stable@vger.kernel.org
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a4b0720e4f)
Cc: stable@vger.kernel.org
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2417f9fd7)
Cc: stable@vger.kernel.org
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4 ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 14c8726b79)
Cc: stable@vger.kernel.org
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b906e1dc7)
Cc: stable@vger.kernel.org
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9ead ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8897ea8c76)
Cc: stable@vger.kernel.org
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 37519d007e)
Cc: stable@vger.kernel.org
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b41c8cb12e)
Cc: stable@vger.kernel.org
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64b525edb7)
Cc: stable@vger.kernel.org
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05e1387d15)
Cc: stable@vger.kernel.org
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876)
Cc: stable@vger.kernel.org
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 54a118f1d7)
Cc: stable@vger.kernel.org
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1b31bf69)
Cc: stable@vger.kernel.org
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db39852d0c)
Cc: stable@vger.kernel.org
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 665b1fc2a1)
Inside an FPU compilation unit DC_FP_START() and DC_FP_END() are defined
as BUILD_BUG(), so using them there fails the build. That was done on
purpose by
commit a574f53ed5 ("drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units").
DC_RUN_WITH_PREEMPTION_ENABLED() was added later by
commit 3539437f35 ("drm/amd/display: Move FPU Guards From DML To DC - Part 1")
and defined as a plain pass-through in that same branch instead. A wrap
placed inside an FPU compilation unit therefore compiles cleanly, reads
as correct during review, and does nothing at all.
This is not hypothetical. While chasing a "scheduling while atomic"
splat in dc_create_plane_state() on PREEMPT_RT, an attempt to place the
guard further up the call chain, in dml21_add_phantom_plane() in
dc/dml2_0/dml21/dml21_utils.c, had no effect for exactly this reason:
dc/dml2_0/Makefile applies CC_FLAGS_FPU to every object under that
directory, and the top level Makefile adds -D_LINUX_FPU_COMPILATION_UNIT
to CC_FLAGS_FPU.
Define the macro as BUILD_BUG() there as well, so that the mistake is a
compile error rather than a guard that silently does nothing. The code
argument is kept in the expansion so the BUILD_BUG() failure is not
accompanied by set-but-unused diagnostics for variables assigned inside
it.
No current user is affected. dc/core/dc_stream.c and
dc/resource/dcn32/dcn32_resource.c are outside the dml directories, and
dc/dml2_0/dml2_wrapper.c and dc/dml2_0/dml21/dml21_wrapper.c are built
without the FPU flags because dc/dml2_0/Makefile replaces their CFLAGS
with CC_FLAGS_NO_FPU and removes CC_FLAGS_FPU.
Link: https://lore.kernel.org/all/1ead313022bc62dce1f42af9f855727eb9074443.camel@web.de/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu15/smu_v15_0_8_ppt.c:1964
smu_v15_0_8_set_performance_level() error: uninitialized symbol 'ret'.
In this line there is an "if (ret)" condition where "ret" is either
zero or uninitialized. Initialize "ret" at the start of the function to
avoid a potential uninitialized variable bug. But also delete the
condition since it is never true.
Fixes: 422b399b09 ("drm/amd/pm: Add od_edit_dpm_table support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A GPU reset can race with BO teardown after the BO's GTT resource has
been marked for deletion but before its drm_mm node is removed. In this
window, amdgpu_gtt_mgr_recover() can treat the node as a live BO and try
to restore its GART mapping while its TT backing is being destroyed.
Recolor the GTT node from amdgpu_bo_delete_mem_notify() so that recovery
skips it, reusing the existing color for ranges without a BO. The range
stays allocated until the resource is freed.
This prevents reset recovery from accessing a BO whose backing storage
is no longer valid.
v2: refine commit message. (David Francis)
v3: Remove new BO color. (Christian)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same change as for h264, avoids overflow later when calculating
min dpb size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A PRT/sparse mapping has no backing BO, so its bo_va->base.bo is NULL.
amdgpu_vm_bo_base_init() deliberately keeps such a bo_va off the vm_bo
state lists, but the tail of amdgpu_vm_bo_update() unconditionally called
amdgpu_vm_bo_idle() for the !always_valid case, putting the NULL-bo PRT
bo_va onto the individual.idle list.
On a GPU reset amdgpu_vm_bo_reset_state_machine() moves individual.idle
to individual.needs_update with moved=true, and amdgpu_vm_handle_moved()
then dereferences bo_va->base.bo to read its reservation object,
crashing on the NULL bo (e.g. the userq eviction restore worker running
during a reset while a user queue is torn down):
BUG: kernel NULL pointer dereference, address: 0000000000000158
RIP: 0010:amdgpu_vm_handle_moved+0x17a/0x200 [amdgpu]
Call Trace:
amdgpu_userq_vm_validate_and_restore_queue+0x2ce/0x920 [amdgpu]
amdgpu_userq_restore_worker+0xce/0x210 [amdgpu]
Skip amdgpu_vm_bo_idle() when bo is NULL so a PRT mapping never lands on
a state list in the first place, and refresh the PRT page tables
explicitly in the userq restore path (as the CS path already does) so
sparse mappings survive a VRAM-lost reset. Because the PRT bo_va is off
the state lists, its PTE update fence lands in prt_va->last_pt_update
rather than vm->last_update, so wait on it explicitly before restarting
the queues (mirroring how the CS path syncs that fence).
v2:
- keep the PRT bo_va off the vm_bo state lists instead of NULL-guarding
bo inside amdgpu_vm_handle_moved(); a PRT mapping should never be on
the moved list in the first place (Christian)
v3:
- the PRT PTEs are updated separately, so their fence is in
prt_va->last_pt_update, not vm->last_update; wait on it in the userq
restore path before restarting queues, otherwise the queues could
restart before the sparse PTEs are written (Christian)
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PCIe L1 low‑power settings for NBIF 6.3.1 were never applied due to
unresolved register mapping, which caused the relevant code to be compiled out.
As a result, the PCIe link could not enter L1/L23 power‑down states or transition to L0s.
Properly configure the link control register to enable L1 and L23 power‑down,
and permit L0s link transitions. Keep LTR disabled and let the PCI core enable it
only after verifying end‑to‑end root complex support across switches.
Fixes: 894c6d3522 ("drm/amdgpu: Add nbif v6_3_1 ip block support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Kenneth Feng <Kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4 ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change VCE now hangs when VCE_CMD_END is emitted
after a pipeline sync without VM flush.
Implement insert_end to correctly insert only one VCE_CMD_END per job.
Fixes: bc639a9ead ("drm/amdgpu: always emit the job vm fence")
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use correct size for message buffer = sizeof(struct ruvd_msg).
Add ITSCALING_TABLE_BUFFER size.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should use actual number of references from the decode
message, instead of maximum derived from level.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes potential overflow in DPB size calculations.
Signed-off-by: David Rosca <david.rosca@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we end up emitting a VM fence keep GDS and SPM
associated with that fence. If not, emit them as
part of the IB fence.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return early if we need to emit spm update.
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During compilation with allmodconfig with KASAN, there appears a Werror:
dml2_core_dcn5_funcs_mode_programming.c:11:13: error: stack frame size
(2400) exceeds limit (2048) in 'dcn5_mode_programming'
[-Werror,-Wframe-larger-than]
The dcn5/dcn6 dml2_core_*_funcs_mode_{programming,support} files were
split out of dml2_core_dcn4_calcs.o, which carries a relaxed
-Wframe-larger-than limit via $(frame_warn_flag) (2056 normally, or
4096 for clang + KASAN/KCSAN + COMPILE_TEST). The split-out files were
never added to the per-file CFLAGS override list, so they inherited the
strict global default of 2048. This is why these files trip the frame
size warning under KASAN while the larger dml2_core_dcn4_calcs.o does
not.
[How]
Apply the same $(frame_warn_flag) and CFLAGS_REMOVE handling used for
dml2_core_dcn4_calcs.o to the split-out files:
- dml2_core_dcn5_funcs_mode_programming.o
- dml2_core_dcn5_funcs_mode_support.o
- dml2_core_dcn6_funcs_mode_programming.o
- dml2_core_dcn6_funcs_mode_support.o
Fixes: 7f7d7ea1fa ("drm/amd/display: Add new sources for DCN6")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES RS64 local memory process/gang context index may be updated,
saved, or restored improperly during queue eviction and restore cycles.
Enabling RS64 memory for MES process/gang context loading introduces
two known issues:
1. Performance regression on userq due to improper context index
handling during RS64 memory access.
2. KFDIPCTest.BasicTest failure on Navi31/32/33: the IPC buffer
GPU VA mapping is not correctly reflected in the restored RS64
process context, causing GPU page faults on the IPC shared
buffer address, which eventually leads to MES firmware becoming
unresponsive and requiring a full GPU reset to recover.
Temporarily disable MES RS64 process/gang context loading until both
issues are resolved.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access to hw is already suspended so there are no reasons to
disable ttm buffer funcs.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK,
but did not validate domain combinations. Userspace could combine
CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making
amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and
hit BUG_ON().
Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/
VRAM domains to be specified one at a time. Return -EINVAL for invalid
combinations in amdgpu_gem_create_ioctl().
v2: Rename helper from amdgpu_gem_domain_valid() to
amdgpu_gem_are_domains_valid() (Christian)
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gfx9 ASICs with mqd_on_vram(), a compute queue MQD lives in a pinned
VRAM buffer object. Pinned BOs are skipped by the VRAM eviction done at S4
suspend, so the MQD contents are lost across hibernation and the first
submission after resume page-faults on a stale MQD.
Unpin the MQD BO at suspend so the eviction migrates it into the
hibernation image, and pin it back to VRAM on resume. The BO may return at
a different VRAM address, so refresh the kernel mapping and cached GPU
addresses and patch the MQD self-address via a new update_mqd_gpu_addr()
mqd_manager op; skip eviction with a warning if that op is not implemented.
v3: use unpin/repin instead of shadowing the MQD into a separate buffer.
v4: drop the explicit VRAM->GTT placement at evict (a bare unpin is enough
for the eviction pass to move the BO out of VRAM), and also repin at queue
destroy. KFD queue restore runs late - user processes thaw before it, and
under SR-IOV it is deferred until the VF exits full access - so once the
VM has resumed an application can destroy a queue before its MQD BO is
repinned, which would otherwise unpin an already-unpinned BO and touch a
stale q->mqd.
v5: drop support for no-HWS mode, and set q->mqd to NULL at eviction.
Signed-off-by: Shikang Fan <shikang.fan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Q10 temperatures were rounded to whole degrees before being scaled
to millidegrees, losing sub-degree precision. Convert them while
preserving the fractional part.
Also, use the standard MILLIDEGREE_PER_DEGREE to represent
SMU_TEMPERATURE_UNITS_PER_CENTIGRADES.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Q10 socket power was rounded to whole watts before scaling to
milliwatts, so the reported value lost its sub-watt precision. Add
SMUQ10_TO_MILLIWATT to convert while keeping the fractional bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert SoC power directly from milliwatts using MILLIWATT_PER_WATT and
remove redundant variables.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Remove the default udmabuf size limit of 64MB.
Cross-subsystem Changes:
- Add dmemcg support for eviction, and hook it up for amdgpu and xe.
Core Changes:
- Changes to TTM to be more aggressive when allocating below protection limit!
- Improve dt binding documentation for renesas.
- Add helper to convert physical address back to buddy block,
add that to and improve its kunit test.
Driver Changes:
- Assorted small fixes to ti-sn65dsi86, panthor, imagination, omapdrm,
bridge/synopsys, panel-edp, ssd130x, panel/tdo-tl070wsh30.
- Add Sharp LQ120P1JX51 panel.
- Add dmemcg support to nouveau.
- Various updates and improvements to sun4i, among which YUV and 4k support.
-----BEGIN PGP SIGNATURE-----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=pXJR
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-08-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.3:
UAPI Changes:
- Remove the default udmabuf size limit of 64MB.
Cross-subsystem Changes:
- Add dmemcg support for eviction, and hook it up for amdgpu and xe.
Core Changes:
- Changes to TTM to be more aggressive when allocating below protection limit!
- Improve dt binding documentation for renesas.
- Add helper to convert physical address back to buddy block,
add that to and improve its kunit test.
Driver Changes:
- Assorted small fixes to ti-sn65dsi86, panthor, imagination, omapdrm,
bridge/synopsys, panel-edp, ssd130x, panel/tdo-tl070wsh30.
- Add Sharp LQ120P1JX51 panel.
- Add dmemcg support to nouveau.
- Various updates and improvements to sun4i, among which YUV and 4k support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/917d462a-8976-4a15-bec4-4513ec51c5c0@linux.intel.com
Register the VRAM manager with the dmem cgroup reclaim infrastructure
so that lowering dmem.max below current VRAM usage triggers TTM
eviction rather than failing with -EBUSY.
Guard place->flags in amdgpu_ttm_bo_eviction_valuable() against NULL,
as the TTM reclaim path passes a NULL place in cgroup drain mode.
Use drmm_cgroup_register_region() so that the region is automatically
unregistered at DRM device release, after drm_dev_unplug() has already
made drm_dev_enter() return false. The drm_dev_enter/exit guard in the
reclaim callback ensures no reclaim work touches the TTM manager after
driver unbind, closing the window between vram_mgr_fini() (called from
drm_driver.release) and the drmm cleanup that unregisters the region.
v3:
- Rebased on fix for uninitialized list and buddy allocator on the
drmm_cgroup_register_region() error path.
v5:
- Rebased on the introduction of struct dmem_cgroup_init.
- Clear the reclaim callback in amdgpu_vram_mgr_fini() to prevent
use-after-free if cgroup reclaim is triggered after driver unbind
while userspace holds an open DRM file descriptor. (Sashiko-bot)
- Switch from drmm_cgroup_register_region() to the raw
dmem_cgroup_register_region() and store the region in
amdgpu_vram_mgr.cg_region. Call dmem_cgroup_unregister_region()
in amdgpu_vram_mgr_fini() after ttm_resource_manager_evict_all()
to drain in-flight reclaim callbacks, and clear man->cg afterwards.
This is required because amdgpu's vram manager fini is called
explicitly during driver unbind, which may precede the DRM device
release and thus precede any drmm-based cleanup. (Sashiko-bot)
v6:
- Fix mgr->cg_region never being assigned, so
dmem_cgroup_unregister_region() in fini silently no-ops on NULL
and leaks the region. (Sashiko-bot)
- Reorder fini to call set_used(false) and evict_all() before
dmem_cgroup_unregister_region(), so ttm_resource_free() can
uncharge via man->cg during eviction; clear man->cg after
unregister. (Sashiko-bot)
v7:
- Move dmem_cgroup_unregister_region() before the early return on
evict_all() failure; not doing so leaves a dangling reclaim callback
pointing to the partially-torn-down VRAM manager, causing a
use-after-free when the cgroup later triggers reclaim. (Sashiko-bot)
- Switch back to drmm_cgroup_register_region() with a drm_dev_enter/
exit guard in the reclaim callback (matching xe), rather than manual
register/unregister. drm_dev_unplug() fires before vram_mgr_fini(),
so drm_dev_enter() returning false prevents any reclaim from touching
the manager during teardown. This also fixes the "vram" name
collision on multi-GPU systems, since drmm_cgroup_register_region()
automatically prefixes with "drm/<pci-addr>/". (Sashiko-bot)
v8:
- Move the dmem cgroup region teardown back into
amdgpu_vram_mgr_fini(): register the region with
dmem_cgroup_register_region() (keeping the "drm/<unique>/vram"
prefix), store it in amdgpu_vram_mgr.cg_region, and unregister it
explicitly after ttm_resource_manager_evict_all(). The v7
drmm-only approach left a use-after-free on the probe-error
teardown path: drm_dev_unplug() is not called there, so the
drm_dev_enter() guard stays open while drm_driver.release destroys
the manager before the drmm action unregisters the region. The
explicit unregister drains in-flight reclaim on every teardown
path; the drm_dev_enter() guard is kept as defense against reclaim
after unplug. (Sashiko-bot)
v9:
- Don't leak a gpu buddy manager on cgroup init failure. (Sashiko-bot)
- Acquire a runtime PM reference (pm_runtime_get_sync/put_autosuspend)
around the TTM reclaim call in amdgpu_vram_mgr_dmem_reclaim().
(Sashiko-bot)
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260725100036.2372-7-thomas.hellstrom@linux.intel.com
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Replace the bare u64 size argument to dmem_cgroup_register_region() and
drmm_cgroup_register_region() with a const struct dmem_cgroup_init *
pointer. The struct currently carries only the size field, but using a
struct makes the API extensible: future callers can supply additional
initialization parameters without adding more positional arguments.
Update all in-tree callers (amdgpu, xe) to use a compound-literal
initializer.
v5:
- Commit introduced.
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260725100036.2372-3-thomas.hellstrom@linux.intel.com
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
