[ Upstream commit 0d9a95099d ]
We keep the gang submission fence around in adev, make sure that it
stays alive.
v2: fix memory leak on retry
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473c33f5ce ]
In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.
Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c90876a695 ]
In preparation for adding support for MT8195's HDMI reserved DPI
instance, move the input_2p_en bit for DP_INTF to platform data.
While at it, remove the input_2pixel member from platform data as
having this bit implies that the 2pixel feature must be enabled.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9d0061c4 ]
debugfs hang_hws is used by GPU reset test with HWS, for MES this crash
the kernel with NULL pointer access because dqm->packet_mgr is not setup
for MES path.
Skip GPU with MES for now, MES hang_hws debugfs interface will be
supported later.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7919b4cad5 ]
If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0b4440cdc ]
If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal
user space to abort the processes. After process abort exit, user queues
still use the GPU to access system memory before h/w is reset while KFD
cleanup worker free system memory and free VRAM.
There is use-after-free race bug that KFD allocate and reuse the freed
system memory, and user queue write to the same system memory to corrupt
the data structure and cause driver crash.
To fix this race, KFD cleanup worker terminate user queues, then flush
reset_domain wq to wait for any GPU ongoing reset complete, and then
free outstanding BOs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e90711946b ]
If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b296955b3a ]
Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and
drm_panel_bridge_add_typed() and derivatives are deprecated for this.
drm_panel_init() won't prevent initializing a panel with a
DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree
users doing it, so take this as an opportinuty to document a valid
connector type must be passed.
Returning an error if this rule is violated is not possible because
drm_panel_init() is a void function. Add at least a warning to make any
violations noticeable, especially to non-upstream drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-5-88ca5827d7af@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b24dcc1835 ]
The Intel model of the OneXPlayer Mini uses a 1200x1920 portrait LCD panel.
The DMI strings are the same as the OneXPlayer, which already has a DMI
quirk, but the panel is different.
Add a DMI match to correctly rotate this panel.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Co-developed-by: John Edwards <uejji@uejji.net>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: João Pedro Kurtz <joexkurtz@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-6-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a860eb9c6b ]
Some GPD Win 2 units shipped with the correct DMI strings.
Add a DMI match to correctly rotate the panel on these units.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-5-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 132c89ef88 ]
The AYANEO Slide uses a 1080x1920 portrait LCD panel. This is the same
panel used on the AYANEO Air Plus, but the DMI data is too different to
match both with one entry.
Add a DMI match to correctly rotate the panel on the AYANEO Slide.
This also covers the Antec Core HS, which is a rebranded AYANEO Slide with
the exact same hardware and DMI strings.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-4-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 529741c331 ]
The AYA NEO Flip DS and KB both use a 1080x1920 portrait LCD panel. The
Flip DS additionally uses a 640x960 portrait LCD panel as a second display.
Add DMI matches to correctly rotate these panels.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Co-developed-by: John Edwards <uejji@uejji.net>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-3-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb8f1e3e8e ]
AYANEO 2S uses the same panel and orientation as the AYANEO 2.
Update the AYANEO 2 DMI match to also match AYANEO 2S.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-2-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d1b33854 ]
[Why]
There have been instances of some monitors being unable to link train on
their reported link speed using their selected FFE preset. If a different
FFE preset is found that has a higher rate of success during link training
this workaround can be used to force its FFE preset.
[How]
A new link workaround flag is made called force_dp_ffe_preset. The flag is
checked in override_training_settings and will set lt_settings->ffe_preset
which is null if the flag is not set. The flag is then set in
override_lane_settings.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Brendan Tam <Brendan.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a4077b4b6 ]
[Why]
The double buffer cursor registers is updated by the cursor
vupdate event. There is a gap between vupdate and cursor data
fetch if cursor fetch data reletive to cursor position.
Cursor corruption will happen if we update the cursor surface
in this gap.
[How]
Modify the cursor request mode to the beginning prefetch always
and avoid wraparound calculation issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e182cb4f5 ]
In certain use-cases, a CRTC could switch between two encoders
and because the mode being programmed on the CRTC remains
the same during this switch, the CRTC's mode_changed remains false.
In such cases, the encoder's mode_set also gets skipped.
Skipping mode_set on the encoder for such cases could cause an issue
because even though the same CRTC mode was being used, the encoder
type could have changed like the CRTC could have switched from a
real time encoder to a writeback encoder OR vice-versa.
Allow encoder's mode_set to happen even when connectors changed on a
CRTC and not just when the mode changed.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-abhinavk-modeset-fix-v3-1-0de4bf3e7c32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c1d5f3a7 ]
A number of test suites call functions that expect the returned
drm_display_mode to be destroyed eventually.
However, none of the tests called drm_mode_destroy, which results in a
memory leak.
Since drm_mode_destroy takes two pointers as argument, we can't use a
kunit wrapper. Let's just create a helper every test suite can use.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-1-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9097e4c8b ]
Delete one line break to make the format correct, resolving the
following warning during a W=1 build:
>> drivers/gpu/drm/tests/drm_kunit_helpers.c:324: warning: bad line: for a KUnit test
Fixes: caa714f866 ("drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501032001.O6WY1VCW-lkp@intel.com/
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104165134.1695864-1-eleanor15x@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa714f866 ]
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51f9072038 ]
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, CRTC. By default it
will create a CRTC relying only on the default helpers, but drivers are
free to deviate from that.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-4-8f4af575fce2@kernel.org
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a48da0feb ]
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, primary plane. By
default, it will create a linear XRGB8888 plane, using the default
helpers.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-3-8f4af575fce2@kernel.org
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66671944e1 ]
The mock device we were creating was missing any of the driver-wide
helpers. That was fine before since we weren't testing the atomic state
path, but we're going to start, so let's use the default
implementations.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-2-8f4af575fce2@kernel.org
Stable-dep-of: 70f29ca311 ("drm/tests: cmdline: Fix drm_display_mode memory leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d3d9776bd ]
The Forcewake timeout issue has been observed on Gen 12.0 and above.
To address this, disable Render Power-Gating (RPG) during live self-tests
for these generations. The temporary workaround 'drm/i915/mtl: do not
enable render power-gating on MTL' disables RPG globally, which is
unnecessary since the issues were only seen during self-tests.
v2: take runtime pm wakeref
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9413
Fixes: 25e7976db8 ("drm/i915/mtl: do not enable render power-gating on MTL")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310152821.2931678-1-sk.anirban@intel.com
(cherry picked from commit 0a4ae87706)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3015eb6e2 ]
On DG2, submissions to VCS engines tied to a gem context are blocked
until the HuC is loaded. Since some selftests do use a gem context,
wait for the HuC load to complete before running the tests to avoid
contamination.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10564
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410201505.894594-1-daniele.ceraolospurio@intel.com
Stable-dep-of: 9d3d9776bd ("drm/i915: Disable RPG during live selftest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bf82f4f8 ]
Xe_LPG+ (IP version 12.74) should take the same general code
paths as Xe_LPG (versions 12.70 and 12.71).
Xe_LPG+'s workaround list will be handled by the next patch.
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-3-haridhar.kalvala@intel.com
Stable-dep-of: 9d3d9776bd ("drm/i915: Disable RPG during live selftest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ed8c7bcf9 ]
Have to give up the const on i915 pointer, but it's not big of a deal
considering non-const i915 gets passed all over the place.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/63e644f056c7745eb0e8e165c990c392a38ec85c.1696236329.git.jani.nikula@intel.com
Stable-dep-of: 9d3d9776bd ("drm/i915: Disable RPG during live selftest")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8aa2864044 upstream.
[WHY & HOW]
dc->links[] has max size of MAX_LINKS and NULL is return when trying to
access with out-of-bound index.
This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[The macro MAX_LINKS is introduced by Commit 60df562814 ("drm/amd/display:
handle invalid connector indices") after 6.10. So here we still use the
original array length MAX_PIPES * 2]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4afacc9948 ]
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb166ee43 ]
There is a type bug because the return statement:
return ret < 0 ? ret : recv_cnt;
The issue is that ret is an int, recv_cnt is a u32 and the function
returns ssize_t, which is a signed long. The way that the type promotion
works is that the negative error codes are first cast to u32 and then
to signed long. The error codes end up being positive instead of
negative and the callers treat them as success.
Fixes: 81cc7e51c4 ("drm/mediatek: Allow commands to be sent during video mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202412210801.iADw0oIH-lkp@intel.com/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/b754a408-4f39-4e37-b52d-7706c132e27f@stanley.mountain/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106a6de46c ]
The function mtk_dp_wait_hpd_asserted() may be called before the
`mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach().
Specifically it can be called via this callpath:
- mtk_edp_wait_hpd_asserted
- [panel probe]
- dp_aux_ep_probe
Using "drm" level prints anywhere in this callpath causes a NULL
pointer dereference. Change the error message directly in
mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the
error messages in mtk_dp_parse_capabilities(), which is called by
mtk_dp_wait_hpd_asserted().
While touching these prints, also add the error code to them to make
future debugging easier.
Fixes: 7eacba9a08 ("drm/mediatek: dp: Add .wait_hpd_asserted() for AUX bus")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250116094249.1.I29b0b621abb613ddc70ab4996426a3909e1aa75f@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3c584c18c ]
There is a type mismatch between what CalculateDynamicMetadataParameters()
takes and what is passed to it. Currently this function accepts several
args as signed long but it's called with unsigned integers and integer. On
some systems where long is 32 bits and one of these unsigned int params is
greater than INT_MAX it may cause passing input params as negative values.
Fix this by changing these argument types from long to unsigned int and to
int respectively. Also this will align the function's definition with
similar functions in other dcn* drivers.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 6725a88f88 ("drm/amd/display: Add DCN3 DML")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 660c396c98 ]
Ordering issues here cause an uninitialized (default STANDALONE)
usecase to be programmed (which appears to be a MUX) in some cases
when msm_dsi_host_register() is called, leading to the slave PLL in
bonded-DSI mode to source from a clock parent (dsi1vco) that is off.
This should seemingly not be a problem as the actual dispcc clocks from
DSI1 that are muxed in the clock tree of DSI0 are way further down, this
bit still seems to have an effect on them somehow and causes the right
side of the panel controlled by DSI1 to not function.
In an ideal world this code is refactored to no longer have such
error-prone calls "across subsystems", and instead model the "PLL src"
register field as a regular mux so that changing the clock parents
programmatically or in DTS via `assigned-clock-parents` has the
desired effect.
But for the avid reader, the clocks that we *are* muxing into DSI0's
tree are way further down, so if this bit turns out to be a simple mux
between dsiXvco and out_div, that shouldn't have any effect as this
whole tree is off anyway.
Fixes: 57bf433893 ("drm/msm/dsi: Pass down use case to PHY")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637650/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14ad809ceb ]
When configuring the timing of DSI hosts (interfaces) in
dsi_timing_setup() all values written to registers are taking
bonded-mode into account by dividing the original mode width by 2
(half the data is sent over each of the two DSI hosts), but the full
width instead of the interface width is passed as hdisplay parameter to
dsi_update_dsc_timing().
Currently only msm_dsc_get_slices_per_intf() is called within
dsi_update_dsc_timing() with the `hdisplay` argument which clearly
documents that it wants the width of a single interface (which, again,
in bonded DSI mode is half the total width of the mode) resulting in all
subsequent values to be completely off.
However, as soon as we start to pass the halved hdisplay
into dsi_update_dsc_timing() we might as well discard
msm_dsc_get_slices_per_intf() since the value it calculates is already
available in dsc->slice_count which is per-interface by the current
design of MSM DPU/DSI implementations and their use of the DRM DSC
helpers.
Fixes: 08802f515c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/637648/
Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-1-913100d6103f@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b4614843 ]
The driver isn't supposed to consult crtc_state->active/active_check for
resource allocation. Instead all resources should be allocated if
crtc_state->enabled is set. Stop consulting active / active_changed in
order to determine whether the hardware resources should be
(re)allocated.
Fixes: ccc862b957 ("drm/msm/dpu: Fix reservation failures in modeset")
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633393/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72fcb88e7b ]
Rename member aud_sampe_size of struct hdmi_audio_param to
aud_sample_size to fix a typo and enhance readability.
This commit brings no functional changes.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-20-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be123cafc ]
The probe function of this driver may fail after registering the
audio platform device: in that case, the state is not getting
cleaned up, leaving this device registered.
Adding up to the mix, should the probe function of this driver
return a probe deferral for N times, we're registering up to N
audio platform devices and, again, never freeing them up.
To fix this, add a pointer to the audio platform device in the
mtk_hdmi structure, and add a devm action to unregister it upon
driver removal or probe failure.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-18-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed15511a77 ]
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com>
Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28b529a985 ]
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d226 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5072fc77f ]
Fix a typo where V compare incorrectly compares av[] with av[] itself,
which can result in HDCP failure.
The loop of V compare is expected to iterate for 5 times
which compare V array form av[0][] to av[4][].
It should check loop counter reach the last statement "i == 5"
before return true
Fixes: 0989c02c7a ("drm/bridge: it6505: fix HDCP CTS compare V matching")
Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121-fix-hdcp-v-comp-v4-1-185f45c728dc@ite.com.tw
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bbce873a9 ]
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 574f5ee2c8 ]
Each bridge instance creates up to four auxiliary devices with different
names. However, their IDs are always zero, causing duplicate filename
errors when a system has multiple bridges:
sysfs: cannot create duplicate filename '/bus/auxiliary/devices/ti_sn65dsi86.gpio.0'
Fix this by using a unique instance ID per bridge instance. The
instance ID is derived from the I2C adapter number and the bridge's I2C
address, to support multiple instances on the same bus.
Fixes: bf73537f41 ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7a68a0e3f927e26edca6040067fb653eb06efb79.1733840089.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
