Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
Some cleanups for fs-verity:
- Rename some names that have been causing confusion.
- Move structs needed for file signing to the UAPI header.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX9bedBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK7s6AQD4xMyyPTAQbznYlxPzn+2d8H3y+qik
xbX7JwATnyOM4AEApDMGPvokvmEJO4z/ionUunR20i//JIyOklxy8w4whQ0=
=XO4L
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Some cleanups for fs-verity:
- Rename some names that have been causing confusion
- Move structs needed for file signing to the UAPI header"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: move structs needed for file signing to UAPI header
fs-verity: rename "file measurement" to "file digest"
fs-verity: rename fsverity_signed_digest to fsverity_formatted_digest
fs-verity: remove filenames from file comments
This release there are some fixes for longstanding problems, as well as
some cleanups:
- Fix a race condition where a duplicate filename could be created in an
encrypted directory if a syscall that creates a new filename raced
with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCX9bcDxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/HRAP95FGQqS47rIEh4LrvS7cohMJxb5NiX
KokAyB88GgmzLQD/c4Xh+iYOxxhFX5NRgruuoec876DrzsuNbEt7WNJ6CQc=
=CBoc
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release there are some fixes for longstanding problems, as well
as some cleanups:
- Fix a race condition where a duplicate filename could be created in
an encrypted directory if a syscall that creates a new filename
raced with the directory's encryption key being added.
- Allow deleting files that use an unsupported encryption policy.
- Simplify the locking for 'struct fscrypt_master_key'.
- Remove kernel-internal constants from the UAPI header.
As usual, all these patches have been in linux-next with no reported
issues, and I've tested them with xfstests"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: allow deleting files with unsupported encryption policy
fscrypt: unexport fscrypt_get_encryption_info()
fscrypt: move fscrypt_require_key() to fscrypt_private.h
fscrypt: move body of fscrypt_prepare_setattr() out-of-line
fscrypt: introduce fscrypt_prepare_readdir()
ext4: don't call fscrypt_get_encryption_info() from dx_show_leaf()
ubifs: remove ubifs_dir_open()
f2fs: remove f2fs_dir_open()
ext4: remove ext4_dir_open()
fscrypt: simplify master key locking
fscrypt: remove unnecessary calls to fscrypt_require_key()
ubifs: prevent creating duplicate encrypted filenames
f2fs: prevent creating duplicate encrypted filenames
ext4: prevent creating duplicate encrypted filenames
fscrypt: add fscrypt_is_nokey_name()
fscrypt: remove kernel-internal constants from UAPI header
-----BEGIN PGP SIGNATURE-----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=mi60
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----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=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX9MyxQAKCRCAXGG7T9hj
vrL8AP0aGFq2Ya77poPVLWMvrBV9KtMVzpLUBzF/M75ShE0EXAD7B7K5QOL/1RcJ
6BD85rFyOaA0YrunHYGJAtDTqms4ZQY=
=uwI9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A short series fixing a regression introduced in 5.9 for running as
Xen dom0 on a system with NVMe backed storage"
* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't use page->lru for ZONE_DEVICE memory
xen: add helpers for caching grant mapping pages
Remove bpf_ prefix, which causes these helpers to be reported in verifier
dump as bpf_bpf_this_cpu_ptr() and bpf_bpf_per_cpu_ptr(), respectively. Lets
fix it as long as it is still possible before UAPI freezes on these helpers.
Fixes: eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:
Cannot find symbol for section 2: .text.
kernel/elfcore.o: failed
Move the empty stubs into linux/elfcore.h as inline functions. As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.
Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Bugfixes:
- Fix array overflow when flexfiles mirroring is enabled
- Fix rpcrdma_inline_fixup() crash with new LISTXATTRS
- Fix 5 second delay when doing inter-server copy
- Disable READ_PLUS by default
-----BEGIN PGP SIGNATURE-----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=EXrS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Here are a handful more bugfixes for 5.10.
Unfortunately, we found some problems with the new READ_PLUS operation
that aren't easy to fix. We've decided to disable this codepath
through a Kconfig option for now, but a series of patches going into
5.11 will clean up the code and fix the issues at the same time. This
seemed like the best way to go about it.
Summary:
- Fix array overflow when flexfiles mirroring is enabled
- Fix rpcrdma_inline_fixup() crash with new LISTXATTRS
- Fix 5 second delay when doing inter-server copy
- Disable READ_PLUS by default"
* tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Disable READ_PLUS by default
NFSv4.2: Fix 5 seconds delay when doing inter server copy
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
pNFS/flexfiles: Fix array overflow when flexfiles mirroring is enabled
Pull networking fixes from David Miller:
1) IPsec compat fixes, from Dmitry Safonov.
2) Fix memory leak in xfrm_user_policy(). Fix from Yu Kuai.
3) Fix polling in xsk sockets by using sk_poll_wait() instead of
datagram_poll() which keys off of sk_wmem_alloc and such which xsk
sockets do not update. From Xuan Zhuo.
4) Missing init of rekey_data in cfgh80211, from Sara Sharon.
5) Fix destroy of timer before init, from Davide Caratti.
6) Missing CRYPTO_CRC32 selects in ethernet driver Kconfigs, from Arnd
Bergmann.
7) Missing error return in rtm_to_fib_config() switch case, from Zhang
Changzhong.
8) Fix some src/dest address handling in vrf and add a testcase. From
Stephen Suryaputra.
9) Fix multicast handling in Seville switches driven by mscc-ocelot
driver. From Vladimir Oltean.
10) Fix proto value passed to skb delivery demux in udp, from Xin Long.
11) HW pkt counters not reported correctly in enetc driver, from Claudiu
Manoil.
12) Fix deadlock in bridge, from Joseph Huang.
13) Missing of_node_pur() in dpaa2 driver, fromn Christophe JAILLET.
14) Fix pid fetching in bpftool when there are a lot of results, from
Andrii Nakryiko.
15) Fix long timeouts in nft_dynset, from Pablo Neira Ayuso.
16) Various stymmac fixes, from Fugang Duan.
17) Fix null deref in tipc, from Cengiz Can.
18) When mss is biog, coose more resonable rcvq_space in tcp, fromn Eric
Dumazet.
19) Revert a geneve change that likely isnt necessary, from Jakub
Kicinski.
20) Avoid premature rx buffer reuse in various Intel driversm from Björn
Töpel.
21) retain EcT bits during TIS reflection in tcp, from Wei Wang.
22) Fix Tso deferral wrt. cwnd limiting in tcp, from Neal Cardwell.
23) MPLS_OPT_LSE_LABEL attribute is 342 ot 8 bits, from Guillaume Nault
24) Fix propagation of 32-bit signed bounds in bpf verifier and add test
cases, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
selftests: fix poll error in udpgro.sh
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix array access with signed variable test
selftests/bpf: Add test for signed 32-bit bound check bug
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
MAINTAINERS: Add entry for Marvell Prestera Ethernet Switch driver
net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower
net/mlx4_en: Handle TX error CQE
net/mlx4_en: Avoid scheduling restart task if it is already running
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
net: flow_offload: Fix memory leak for indirect flow block
tcp: Retain ECT bits for tos reflection
ethtool: fix stack overflow in ethnl_parse_bitset()
e1000e: fix S0ix flow to allow S0i3.2 subset entry
ice: avoid premature Rx buffer reuse
ixgbe: avoid premature Rx buffer reuse
i40e: avoid premature Rx buffer reuse
igb: avoid transmit queue timeout in xdp path
igb: use xdp_do_flush
igb: skb add metasize for xdp
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-12-10
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 12 day(s) which contain
a total of 21 files changed, 163 insertions(+), 88 deletions(-).
The main changes are:
1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei.
2) Fix ring_buffer__poll() return value, from Andrii.
3) Fix race in lwt_bpf, from Cong.
4) Fix test_offload, from Toke.
5) Various xsk fixes.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John
Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Switch to RCU in x_tables to fix possible NULL pointer dereference,
from Subash Abhinov Kasiviswanathan.
2) Fix netlink dump of dynset timeouts later than 23 days.
3) Add comment for the indirect serialization of the nft commit mutex
with rtnl_mutex.
4) Remove bogus check for confirmed conntrack when matching on the
conntrack ID, from Brett Mastbergen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* Shutdown hook for GPU (to ensure GPU is idle before iommu goes away)
* GPU cooling device support
* DSI 7nm and 10nm phy/pll updates
* Additional sm8150/sm8250 DPU support (merge_3d and DSPP color
processing)
* Various DP fixes
* A whole bunch of W=1 fixes from Lee Jones
* GEM locking re-work (no more trylock_recursive in shrinker!)
* LLCC (system cache) support
* Various other fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt0G=H3_RbF_GAQv838z5uujSmFd+7fYhL6Yg=23LwZ=g@mail.gmail.com
Since commit 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF
programs in net_device"), the XDP program attachment info is now maintained
in the core code. This interacts badly with the xdp_attachment_flags_ok()
check that prevents unloading an XDP program with different load flags than
it was loaded with. In practice, two kinds of failures are seen:
- An XDP program loaded without specifying a mode (and which then ends up
in driver mode) cannot be unloaded if the program mode is specified on
unload.
- The dev_xdp_uninstall() hook always calls the driver callback with the
mode set to the type of the program but an empty flags argument, which
means the flags_ok() check prevents the program from being removed,
leading to bpf prog reference leaks.
The original reason this check was added was to avoid ambiguity when
multiple programs were loaded. With the way the checks are done in the core
now, this is quite simple to enforce in the core code, so let's add a check
there and get rid of the xdp_attachment_flags_ok() callback entirely.
Fixes: 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
Commit 9e2369c06c ("xen: add helpers to allocate unpopulated
memory") introduced usage of ZONE_DEVICE memory for foreign memory
mappings.
Unfortunately this collides with using page->lru for Xen backend
private page caches.
Fix that by using page->zone_device_data instead.
Cc: <stable@vger.kernel.org> # 5.9
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of having similar helpers in multiple backend drivers use
common helpers for caching pages allocated via gnttab_alloc_pages().
Make use of those helpers in blkback and scsiback.
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.
Fixes: 94abdad697 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by
8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23
days"), otherwise ruleset listing breaks.
Fixes: a8b1e36d0d ("netfilter: nft_dynset: fix element timeout for HZ != 1000")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.
Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:
esp-hw-offload: off [requested on]
I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.
Fixes: a3b658cfb6 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.
The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.
However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.
Fixes: 80055dab5d ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore")
Reported-by: Sean Tranchetti <stranche@codeaurora.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HM12 is a YUV semi-planar macro-block format. Move it from
the packed YUV formats section where it was misplaced to the YUV
semi-planar formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HI240 is a 8-bit dithered RGB format specific to BTTV. Move
it from the packed YUV formats section where it was misplaced to the
vendor-specific formats section.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_BGRA444 format has a comment that explains why its 4CC
value is GA12. This explains the development history and isn't of much
interest to readers, it should have been part of a commit message
instead. Drop the comment, anyone interested in history can turn to git.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.
[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Here are two tty core fixes for 5.10-rc7.
They resolve some reported locking issues in the tty core. While they
have not been in a released linux-next yet, they have passed all of the
0-day bot testing as well as the submitter's testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8zqVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn6aACgiBghNkA6SJIjM1mcPCI/Nkvs3qoAn0g+l8Z1
zATUgLS4xqAHnYXUfHpy
=eB5C
-----END PGP SIGNATURE-----
Merge tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty core fixes for 5.10-rc7.
They resolve some reported locking issues in the tty core. While they
have not been in a released linux-next yet, they have passed all of
the 0-day bot testing as well as the submitter's testing"
* tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix ->session locking
tty: Fix ->pgrp locking in tiocspgrp()
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI infrastructure.
Make this work by passing the affinity setup information down to the
mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is bouncing
and he's not reachable. We hope all is well with him and say thanks
for his work over the years.
-----BEGIN PGP SIGNATURE-----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=/DKJ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI
infrastructure. Make this work by passing the affinity setup
information down to the mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
bouncing and he's not reachable. We hope all is well with him and
say thanks for his work over the years"
* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
genirq/irqdomain: Add an irq_create_mapping_affinity() function
MAINTAINERS: Move Jason Cooper to CREDITS
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org
Fixes: e47110e905 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current assumption is that the felix DSA driver has flooding knobs
per traffic class, while ocelot switchdev has a single flooding knob.
This was correct for felix VSC9959 and ocelot VSC7514, but with the
introduction of seville VSC9953, we see a switch driven by felix.c which
has a single flooding knob.
So it is clear that we must do what should have been done from the
beginning, which is not to overwrite the configuration done by ocelot.c
in felix, but instead to teach the common ocelot library about the
differences in our switches, and set up the flooding PGIDs centrally.
The effect that the bogus iteration through FELIX_NUM_TC has upon
seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and
ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will
actually overwrite ANA_FLOODING_IPMC when attempting to write
ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING.
And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect
is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D:
MC6_DATA = 61,
MC6_CTRL = 61,
MC4_DATA = 60,
MC4_CTRL = 0.
Because MC4_CTRL is zero, this means that IPv4 multicast control packets
are not flooded, but dropped. An invalid configuration, and this is how
the issue was actually spotted.
Reported-by: Eldar Gasanov <eldargasanov2@gmail.com>
Reported-by: Maxim Kochetkov <fido_max@inbox.ru>
Tested-by: Eldar Gasanov <eldargasanov2@gmail.com>
Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 3c7b51bd39 ("net: dsa: felix: allow flooding for all traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KwFgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlN+CAC0H96QVQTS5+osg3FOaBMO/whp3Wgw
AA/W8g/TyzW41CnuSRr/B90p+XOYdn7xyt3YjsI1KDUuwMzeMncVq/rLZBdJmsyk
q1ra+zkz430W6oE3+xr7By50RGVHH1c1fbhpaS+Jb2xRYqPmjneHk/aHt7SH2DAX
HhViT6GW0k7rg+NrwZCw9sjOC4/dSz63i0wQAuvM06DK4hLzY54CwV5cQwCnUzA8
ZK6N69cayP/6A0L6RyEKbH3E9YbT0lrD3+Q6VtSYVn/8Dcftx9McyFEckqEOWq0a
3XywXhFbc9L8WhM6XxmobxXlIg/HlhhY9MjHMGu76LthhpLe0YAp0Yyh
=RnxG
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull fix for device mapper fixes from Mike Snitzer:
"Apologies for the glaring bug I introduced with my previous pull
request!
Fix incorrect branching at top of blk_max_size_offset()"
* tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
block: fix incorrect branching in blk_max_size_offset()
Namespaced file capabilities were introduced in 8db6c34f1d .
When userspace reads an xattr for a namespaced capability, a
virtualized representation of it is returned if the caller is
in a user namespace owned by the capability's owning rootid.
The function which performs this virtualization was not hooked
up if CONFIG_SECURITY=n. Therefore in that case the original
xattr was shown instead of the virtualized one.
To test this using libcap-bin (*1),
$ v=$(mktemp)
$ unshare -Ur setcap cap_sys_admin-eip $v
$ unshare -Ur setcap -v cap_sys_admin-eip $v
/tmp/tmp.lSiIFRvt8Y: OK
"setcap -v" verifies the values instead of setting them, and
will check whether the rootid value is set. Therefore, with
this bug un-fixed, and with CONFIG_SECURITY=n, setcap -v will
fail:
$ v=$(mktemp)
$ unshare -Ur setcap cap_sys_admin=eip $v
$ unshare -Ur setcap -v cap_sys_admin=eip $v
nsowner[got=1000, want=0],/tmp/tmp.HHDiOOl9fY differs in []
Fix this bug by calling cap_inode_getsecurity() in
security_inode_getsecurity() instead of returning
-EOPNOTSUPP, when CONFIG_SECURITY=n.
*1 - note, if libcap is too old for getcap to have the '-n'
option, then use verify-caps instead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209689
Cc: Hervé Guillemet <herve@guillemet.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
If non-zero 'chunk_sectors' is passed in to blk_max_size_offset() that
override will be incorrectly ignored.
Old blk_max_size_offset() branching, prior to commit 3ee16db390,
must be used only if passed 'chunk_sectors' override is zero.
Fixes: 3ee16db390 ("dm: fix IO splitting")
Cc: stable@vger.kernel.org # 5.9
Reported-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KonYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgSJCACNYEndubrROJZL+FOUQixzZQiOfphw
9Brb/XbdXWXIv7F+JV85E6olOqz7JjTGrO91uD5kwHEtVhDx5zT/GCm+5FoBrLa/
FuTphPRWNimZSU1umJe2AG9hOiDpPJJUe/wwj3QkBH2TeEHwBHblB8BkRFzxnP+p
0dGybrQBMtrH3GO65YG7qaASeBPl1+G3mVHfzViyhk1uoZL1y9pKbzPK60TkHcsa
VCGTPke5Ri3hvd85hmpDcXmyxjxZfCA8Jc/DrQ+DDEwakHoJFwlSzP7fqwHnpKHT
RDL4iOID54SViSGqzNcxlGtr/EHyN9Mom2d4Nnb0cgsRG4woCeJWJZMM
=+o1m
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM's bio splitting changes that were made during v5.9. This
restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
* tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: remove invalid sparse __acquires and __releases annotations
dm: fix double RCU unlock in dm_dax_zero_page_range() error path
dm: fix IO splitting
dm writecache: remove BUG() and fail gracefully instead
dm table: Remove BUG_ON(in_interrupt())
dm: fix bug with RCU locking in dm_blk_report_zones
Revert "dm cache: fix arm link errors with inline"
dm writecache: fix the maximum number of arguments
dm writecache: advance the number of arguments when reporting max_age
dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
Commit 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.
And commit 5091cdec56 ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).
Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.
Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.
Fixes: 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56 ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.
On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)
Change the locking on ->session such that:
- tty_lock() is held by all writers: By making disassociate_ctty()
hold it. This should be fine because the same lock can already be
taken through the call to tty_vhangup_session().
The tricky part is that we need to shorten the area covered by
siglock to be able to take tty_lock() without ugly retry logic; as
far as I can tell, this should be fine, since nothing in the
signal_struct is touched in the `if (tty)` branch.
- ctrl_lock is held by all writers: By changing __proc_set_tty() to
hold the lock a little longer.
- All readers that aren't holding tty_lock() hold ctrl_lock: By
adding locking to tiocgsid() and __do_SAK(), and expanding the area
covered by ctrl_lock in tiocspgrp().
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a missing prototype warning on blake2s_selftest.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.
Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value,
so one of them needs fixing. Move STATX_ATTR_DAX.
While we're in here, clarify the value-matching scheme for some of the
attributes, and explain why the value for DAX does not match.
Fixes: 80340fe360 ("statx: add mount_root")
Fixes: 712b2698e4 ("fs/stat: Define DAX statx attribute")
Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/
Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).
Now, the FWHT stateless controls is ready to be part
of the stable uAPI.
While not too late:
- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.
- Move the contents of fwht-ctrls.h to v4l2-controls.h.
- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
to v4l2-controls.h.
- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.
- Add p_fwht_params to struct v4l2_ext_control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The H.264 stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (h264-ctrls.h).
Now, the H264 stateless controls is ready to be part
of the stable uAPI.
While not too late, let's rename them and re-number their
control IDs, moving them to the newly created stateless
control class, and updating all the drivers accordingly.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the H264 stateless control types out of staging,
and re-number them to avoid any confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since we are ready to stabilize the H264 stateless API,
start by first moving the parsed H264 pixel format.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a new control class to hold the stateless codecs controls
that are ready to be moved out of staging.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Check that all the fields that correspond or are related
to a H264 specification syntax element have legal values.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Avoid including h264-ctrls.h, vp8-ctrls.h, etc,
and instead just include v4l2-ctrls.h which does the right
thing.
This is in preparation for moving the stateless controls
out of staging, which will mean removing some of these headers.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For historical reasons, stateful codec controls are named
as {}_MPEG_{}. While we can't at this point sanely
change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER),
we can least change the more meaningful macros such as classes
macros.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
