As per a discussion with Muhammad Usama Anjum [1], the following is how
one is supposed to build selftests:
make headers && make -C tools/testing/selftests/mm
Change the selftest build system's lib.mk to fail out with a helpful
message if that prerequisite "make headers" has not been done yet.
[1] https://lore.kernel.org/all/bf910fa5-0c96-3707-cce4-5bcc656b6274@collabora.com/
[jhubbard@nvidia.com: abort the make process the first time headers aren't detected]
Link: https://lkml.kernel.org/r/14573e7e-f2ad-ff34-dfbd-3efdebee51ed@nvidia.com
[anders.roxell@linaro.org: fix out-of-tree builds]
Link: https://lkml.kernel.org/r/20230613074931.666966-1-anders.roxell@linaro.org
Link: https://lkml.kernel.org/r/20230606071637.267103-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are only three uffd*() routines that are used outside of the uffd
selftests. Leave these in vm_util.c, where they are available to any mm
selftest program:
uffd_register()
uffd_unregister()
uffd_register_with_ioctls().
A few other uffd*() routines, however, are only used by the uffd-focused
tests found in uffd-stress.c and uffd-unit-tests.c. Move those routines
into uffd-common.c.
Link: https://lkml.kernel.org/r/20230606071637.267103-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MADV_PAGEOUT, MADV_POPULATE_READ, MADV_COLLAPSE are conditionally
defined as necessary. However, that was being done in .c files, and a
new build failure came up that would have been automatically avoided had
these been in a common header file.
So consolidate and move them all to vm_util.h, which fixes the build
failure.
An alternative approach from Muhammad Usama Anjum was: rely on "make
headers" being required, and include asm-generic/mman-common.h. This
works in the sense that it builds, but it still generates warnings about
duplicate MADV_* symbols, and the goal here is to get a fully clean (no
warnings) build here.
Link: https://lkml.kernel.org/r/20230606071637.267103-9-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes a real bug, too, because xstate_size() was assuming that
the stack variable xstate_size was initialized to zero. That's not
guaranteed nor even especially likely.
Link: https://lkml.kernel.org/r/20230606071637.267103-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The uffd tests generate two compile time warnings from clang's
-Wformat-security setting. These trigger at the call sites for
uffd_test_start() and uffd_test_skip().
1) Fix the uffd_test_start() issue by removing the intermediate
test_name variable (thanks to David Hildenbrand for showing how to do
this).
2) Fix the uffd_test_skip() issue by observing that there is no need for
a macro and a variable args approach, because all callers of
uffd_test_skip() pass in a simple char* string, without any format
specifiers. So just change uffd_test_skip() into a regular C function.
Link: https://lkml.kernel.org/r/20230606071637.267103-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These new build products were left out of .gitignore, so add them now.
Link: https://lkml.kernel.org/r/20230606071637.267103-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We cannot depend upon git to reliably retain the executable bit on shell
scripts, or so I was told several years ago while working on this same
run_vmtests.sh script. And sure enough, things such as test_hmm.sh are
lately failing to run, due to lacking execute permissions.
Fix this by explicitly adding "bash" to each of the shell script
invocations. Leave fixing the overall approach to another day.
Link: https://lkml.kernel.org/r/20230606071637.267103-5-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The stop variable is a char*, and the code was assigning a char value to
it. This was generating a warning when compiling with clang.
However, as both David and Peter pointed out, stop is not even used
after the problematic assignment to a char type. So just delete that
line entirely.
Link: https://lkml.kernel.org/r/20230606071637.267103-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dummy variables are required in order to make these two (similar)
routines work, so in both cases, declare the variables as volatile in
order to avoid the clang compiler warning.
Furthermore, in order to ensure that each test actually does what is
intended, add an asm volatile invocation (thanks to David Hildenbrand
for the suggestion), with a clarifying comment so that it survives
future maintenance.
Link: https://lkml.kernel.org/r/20230606071637.267103-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "A minor flurry of selftest/mm fixes", v3.
A series that fixes up build errors and warnings for at least the 64-bit
builds on x86 with clang.
The series also includes an optional "improvement" of moving some uffd
code into uffd-common.[ch], which is proving to be somewhat controversial,
and so if that doesn't get resolved, then patches 9 and 10 may just get
dropped. They are not required in order to get a clean build, now that
"make headers" is happening.
[1]: https://lore.kernel.org/all/20230602013358.900637-1-jhubbard@nvidia.com/
This patch (of 11):
uffd_minor_feature() was unused. Remove it in order to fix the associated
clang build warning.
Link: https://lkml.kernel.org/r/20230606071637.267103-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20230606071637.267103-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit f079a020ba ("selftests: memcg: factor out common parts of
memory.{low,min} tests"), the value used in second alloc_anon has changed
from 148M to 170M. Because memory.low allows reclaiming page cache in
child cgroups, so the memory.current is close to 30M instead of 50M.
Therefore, adjust the expected value of parent cgroup.
Link: https://lkml.kernel.org/r/20230522095233.4246-2-haifeng.xu@shopee.com
Fixes: f079a020ba ("selftests: memcg: factor out common parts of memory.{low,min} tests")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Similar to the COW selftests, also use io_uring fixed buffers to test if
long-term page pinning works as expected.
Link: https://lkml.kernel.org/r/20230519102723.185721-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add a new test for checking whether GUP long-term page pinning works
as expected (R/O vs. R/W, MAP_PRIVATE vs. MAP_SHARED, GUP vs.
GUP-fast). Note that COW handling with long-term R/O pinning in private
mappings, and pinning of anonymous memory in general, is tested by the COW
selftest. This test, therefore, focuses on page pinning in file mappings.
The most interesting case is probably the "local tmpfile" case, as that
will likely end up on a "real" filesystem such as ext4 or xfs, not on a
virtual one like tmpfs or hugetlb where any long-term page pinning is
always expected to succeed.
For now, only add tests that use the "/sys/kernel/debug/gup_test"
interface. We'll add tests based on liburing separately next.
[akpm@linux-foundation.org: update .gitignore for gup_longterm, per Peter]
Link: https://lkml.kernel.org/r/20230519102723.185721-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: new test for FOLL_LONGTERM on file mappings".
Let's add some selftests to make sure that:
* R/O long-term pinning always works of file mappings
* R/W long-term pinning always works in MAP_PRIVATE file mappings
* R/W long-term pinning only works in MAP_SHARED mappings with special
filesystems (shmem, hugetlb) and fails with other filesystems (ext4, btrfs,
xfs).
The tests make use of the gup_test kernel module to trigger ordinary GUP
and GUP-fast, and liburing (similar to our COW selftests). Test with
memfd, memfd hugetlb, tmpfile() and mkstemp(). The latter usually gives
us a "real" filesystem (ext4, btrfs, xfs) where long-term pinning is
expected to fail.
Note that these selftests don't contain any actual reproducers for data
corruptions in case R/W long-term pinning on problematic filesystems
"would" work.
Maybe we can later come up with a racy !FOLL_LONGTERM reproducer that can
reuse an existing interface to trigger short-term pinning (I'll look into
that next).
On current mm/mm-unstable:
# ./gup_longterm
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
TAP version 13
1..50
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd
ok 1 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with tmpfile
ok 2 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile
ok 3 Should have failed
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 4 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 5 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd
ok 6 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile
ok 7 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile
ok 8 Should have failed
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 9 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 10 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd
ok 11 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with tmpfile
ok 12 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile
ok 13 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 14 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 15 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd
ok 16 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile
ok 17 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile
ok 18 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 19 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 20 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd
ok 21 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile
ok 22 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 23 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 24 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 25 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd
ok 26 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile
ok 27 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 28 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 29 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 30 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd
ok 31 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile
ok 32 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 33 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 34 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 35 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd
ok 36 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile
ok 37 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 38 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 39 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 40 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd
ok 41 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with tmpfile
ok 42 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with local tmpfile
ok 43 Should have failed
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 44 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 45 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd
ok 46 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with tmpfile
ok 47 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with local tmpfile
ok 48 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 49 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 50 Should have worked
# Totals: pass:50 fail:0 xfail:0 xpass:0 skip:0 error:0
This patch (of 3):
Let's factor detection out into vm_util, to be reused by a new test.
Link: https://lkml.kernel.org/r/20230519102723.185721-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230519102723.185721-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test functions are not needed after the module is removed, so mark
them as such. Add __exit to the module removal function. Some other
variables have been marked as const static as well.
Link: https://lkml.kernel.org/r/20230518145544.1722059-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test code is less useful without debug, but can still do general
validations. Define mt_dump(), mas_dump() and mas_wr_dump() as a noop if
debug is not enabled and document it in the test module information that
more information can be obtained with another kernel config option.
MT_BUG_ON() will report a failures without tree dumps, and the output will
be less useful.
Link: https://lkml.kernel.org/r/20230518145544.1722059-17-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allow different formatting strings to be used when dumping the tree.
Currently supports hex and decimal.
Link: https://lkml.kernel.org/r/20230518145544.1722059-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The maple tree node limits are implied by the parent. When walking up the
tree, the limit may not be known until a slot that does not have implied
limits are encountered. However, if the node is the left-most or
right-most node, the walking up to find that limit can be skipped.
This commit also fixes the debug/testing code that was not setting the
limit on walking down the tree as that optimization is not compatible with
this change.
Link: https://lkml.kernel.org/r/20230518145544.1722059-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test cachestat on a newly created file, /dev/ files, /proc/ files and a
directory. Also test on a shmem file (which can also be tested with
huge pages since tmpfs supports huge pages).
[colin.i.king@gmail.com: fix spelling mistake "trucate" -> "truncate"]
Link: https://lkml.kernel.org/r/20230505110855.2493457-1-colin.i.king@gmail.com
[mpe@ellerman.id.au: avoid excessive stack allocation]
Link: https://lkml.kernel.org/r/877ctfa6yv.fsf@mail.lhotse
Link: https://lkml.kernel.org/r/20230503013608.2431726-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Stop trusting capacity data before the "media ready" indication
- Add missing HDM decoder capability enable for the cold-plug case
- Fix a debug message induced crash
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZHFLXgAKCRDfioYZHlFs
Z2XxAQDaJl6CVwalMooLpnDN15eiGH2CFDRec9FK62ZH+m27CgD/Zx5QMZUp6YBC
b9A3Tmx1MzIekO1CYRq9vi4ybXMCAAg=
=cmO2
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
"The 'media ready' series prevents the driver from acting on bad
capacity information, and it moves some checks earlier in the init
sequence which impacts topics in the queue for 6.5.
Additional hotplug testing uncovered a missing enable for memory
decode. A debug crash fix is also included.
Summary:
- Stop trusting capacity data before the "media ready" indication
- Add missing HDM decoder capability enable for the cold-plug case
- Fix a debug message induced crash"
* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Explicitly initialize resources when media is not ready
cxl/port: Fix NULL pointer access in devm_cxl_add_port()
cxl: Move cxl_await_media_ready() to before capacity info retrieval
cxl: Wait Memory_Info_Valid before access memory related info
cxl/port: Enable the HDM decoder capability for switch ports
- fix incorrect output in in-tree gpio tools
- fix a shell coding issue in gpio-sim selftests
- correctly set the permissions for debugfs attributes exposed by gpio-mockup
- fix chip name and pin count in gpio-f7188x for one of the supported models
- fix numberspace pollution when using dynamically and statically allocated
GPIOs together
-----BEGIN PGP SIGNATURE-----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=R4dV
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix incorrect output in in-tree gpio tools
- fix a shell coding issue in gpio-sim selftests
- correctly set the permissions for debugfs attributes exposed by
gpio-mockup
- fix chip name and pin count in gpio-f7188x for one of the supported
models
- fix numberspace pollution when using dynamically and statically
allocated GPIOs together
* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio-f7188x: fix chip name and pin count on Nuvoton chip
gpiolib: fix allocation of mixed dynamic/static GPIOs
gpio: mockup: Fix mode of debugfs files
selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
tools: gpio: fix debounce_period_us output of lsgpio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZG4AiAAKCRDbK58LschI
g+xlAQCmefGbDuwPckZLnomvt6gl4bkIjs7kc1ySbG9QBnaInwD/WyrJaQIPijuD
qziHPAyx+MEgPseFU1b7Le35SZ66IwM=
=s4R1
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When BPF program drops pkts the sockmap logic 'eats' the packet and
updates copied_seq. In the PASS case where the sk_buff is accepted
we update copied_seq from recvmsg path so we need a new test to
handle the drop case.
Original patch series broke this resulting in
test_sockmap_skb_verdict_fionread:PASS:ioctl(FIONREAD) error 0 nsec
test_sockmap_skb_verdict_fionread:FAIL:ioctl(FIONREAD) unexpected ioctl(FIONREAD): actual 1503041772 != expected 256
After updated patch with fix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-14-john.fastabend@gmail.com
A bug was reported where ioctl(FIONREAD) returned zero even though the
socket with a SK_SKB verdict program attached had bytes in the msg
queue. The result is programs may hang or more likely try to recover,
but use suboptimal buffer sizes.
Add a test to check that ioctl(FIONREAD) returns the correct number of
bytes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-13-john.fastabend@gmail.com
When session gracefully shutdowns epoll needs to wake up and any recv()
readers should return 0 not the -EAGAIN they previously returned.
Note we use epoll instead of select to test the epoll wake on shutdown
event as well.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-12-john.fastabend@gmail.com
A common operation for testing is to spin up a pair of sockets that are
connected. Then we can use these to run specific tests that need to
send data, check BPF programs and so on.
The sockmap_listen programs already have this logic lets move it into
the new sockmap_helpers header file for general use.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-11-john.fastabend@gmail.com
No functional change here we merely pull the helpers in sockmap_listen.c
into a header file so we can use these in other programs. The tests we
are about to add aren't really _listen tests so doesn't make sense
to add them here.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-10-john.fastabend@gmail.com
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes: b60417a9f2 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing
IDENTIFY and retrieving memory device information to ensure that the
device is ready to provide the information. Allow cxl_pci_probe() to succeed
even if media is not ready. Cache the media failure in cxlds and don't ask
the device for any media information.
The rationale for proceeding in the !media_ready case is to allow for
mailbox operations to interrogate and/or remediate the device. After
media is repaired then rebinding the cxl_pci driver is expected to
restart the capacity scan.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168445310026.3251520.8124296540679268206.stgit@djiang5-mobl3
[djbw: fixup cxl_test]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Derick noticed, when testing hot plug, that hot-add behaves nominally
after a removal. However, if the hot-add is done without a prior
removal, CXL.mem accesses fail. It turns out that the original
implementation of the port driver and region programming wrongly assumed
that platform-firmware always enables the host-bridge HDM decoder
capability. Add support turning on switch-level HDM decoders in the case
where platform-firmware has not.
The implementation is careful to only arrange for the enable to be
undone if the current instance of the driver was the one that did the
enable. This is to interoperate with platform-firmware that may expect
CXL.mem to remain active after the driver is shutdown. This comes at the
cost of potentially not shutting down the enable on kexec flows, but it
is mitigated by the fact that the related HDM decoders still need to be
enabled on an individual basis.
Cc: <stable@vger.kernel.org>
Reported-by: Derick Marks <derick.w.marks@intel.com>
Fixes: 54cdbf845c ("cxl/port: Add a driver for 'struct cxl_port' objects")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/168437998331.403037.15719879757678389217.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PfWP
-----END PGP SIGNATURE-----
Merge tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm, bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS"
* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
MAINTAINERS: skip CCing netdev for Bluetooth patches
mdio_bus: unhide mdio_bus_init prototype
bridge: always declare tunnel functions
atm: hide unused procfs functions
net: isa: include net/Space.h
Revert "ARM: dts: stm32: add CAN support on stm32f746"
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
net: wwan: t7xx: Ensure init is completed before system sleep
net: selftests: Fix optstring
net: pcs: xpcs: fix C73 AN not getting enabled
net: wwan: iosm: fix NULL pointer dereference when removing device
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
mailmap: add entries for Nikolay Aleksandrov
igb: fix bit_shift to be in [1..8] range
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
cassini: Fix a memory leak in the error handling path of cas_init_one()
tun: Fix memory leak for detached NAPI queue.
can: kvaser_pciefd: Disable interrupts in probe error path
...
This Kselftest fixes update for Linux 6.4-rc3 consists of:
- sgx test fix for false negatives.
- ftrace output is hard to parses and it masks inappropriate skips etc.
This fix addresses the problems by integrating with kselftest runner.
-----BEGIN PGP SIGNATURE-----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=DOlj
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- sgx test fix for false negatives
- ftrace output is hard to parses and it masks inappropriate skips etc.
This fix addresses the problems by integrating with kselftest runner
* tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Improve integration with kselftest runner
selftests/sgx: Add "test_encl.elf" to TEST_FILES
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes: 5feba47273 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building sign-file, the call to get the CFLAGS for libcrypto is
missing white-space between `pkg-config` and `--cflags`:
$(shell $(HOSTPKG_CONFIG)--cflags libcrypto 2> /dev/null)
Removing the redirection of stderr, we see:
$ make -C tools/testing/selftests/bpf sign-file
make: Entering directory '[...]/tools/testing/selftests/bpf'
make: pkg-config--cflags: No such file or directory
SIGN-FILE sign-file
make: Leaving directory '[...]/tools/testing/selftests/bpf'
Add the missing space.
Fixes: fc97590668 ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/bpf/20230426215032.415792-1-jeremy@azazel.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZGETgQAKCRDfioYZHlFs
Zy+FAQDDwPDprMrALvuWz3rYPROPH0h6X2zLYH5JFq29cqjO9wD/RVlrXFFkGaG+
3n7Uip2rZaW3OpC2TOaqBaDxTkXo0ww=
=yFDG
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
Starting with commit:
95433f7263 ("srcu: Begin offloading srcu_struct fields to srcu_update")
...it is no longer possible to do:
static DEFINE_SRCU(x)
Switch to DEFINE_STATIC_SRCU(x) to fix:
tools/testing/cxl/test/mock.c:22:1: error: duplicate ‘static’
22 | static DEFINE_SRCU(cxl_mock_srcu);
| ^~~~~~
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168392709546.1135523.10424917245934547117.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes: 2195444e09 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of
several routers (rt-1, rt-2) and hosts.
When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate
Address Detection (DAD) kicks in when enabled in the Linux distros running
the selftests. DAD is used to check whether an IPv6 address is already
assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo
Request and waiting for a reply.
As the DAD process could take too long to complete, it may cause the
failing of some tests carried out by the srv6_end_dt4_l3vpn_test script.
To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers
since we configure the virtual network manually and do not need any address
deduplication mechanism at all.
Fixes: 2195444e09 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to Mirsad the gpio-sim.sh test appears to FAIL in a wrong way
due to missing initialisation of shell variables:
4.2. Bias settings work correctly
cat: /sys/devices/platform/gpio-sim.0/gpiochip18/sim_gpio0/value: No such file or directory
./gpio-sim.sh: line 393: test: =: unary operator expected
bias setting does not work
GPIO gpio-sim test FAIL
After this change the test passed:
4.2. Bias settings work correctly
GPIO gpio-sim test PASS
His testing environment is AlmaLinux 8.7 on Lenovo desktop box with
the latest Linux kernel based on v6.2:
Linux 6.2.0-mglru-kmlk-andy-09238-gd2980d8d8265 x86_64
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=HmfP
-----END PGP SIGNATURE-----
Merge tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter updates for net
The following patchset contains Netfilter fixes for net:
1) Fix UAF when releasing netnamespace, from Florian Westphal.
2) Fix possible BUG_ON when nf_conntrack is enabled with enable_hooks,
from Florian Westphal.
3) Fixes for nft_flowtable.sh selftest, from Boris Sukholitko.
4) Extend nft_flowtable.sh selftest to cover integration with
ingress/egress hooks, from Florian Westphal.
* tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: nft_flowtable.sh: check ingress/egress chain too
selftests: nft_flowtable.sh: monitor result file sizes
selftests: nft_flowtable.sh: wait for specific nc pids
selftests: nft_flowtable.sh: no need for ps -x option
selftests: nft_flowtable.sh: use /proc for pid checking
netfilter: conntrack: fix possible bug_on with enable_hooks=1
netfilter: nf_tables: always release netdev hooks from notifier
====================
Link: https://lore.kernel.org/r/20230510083313.152961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When run the test in netns, it's not easy to get the tc stats via
tc_rule_handle_stats_get(). With the new netns parameter, we can get
stats from specific netns like
num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure flowtable interacts correctly with ingress and egress
chains, i.e. those get handled before and after flow table respectively.
Adds three more tests:
1. repeat flowtable test, but with 'ip dscp set cs3' done in
inet forward chain.
Expect that some packets have been mangled (before flowtable offload
became effective) while some pass without mangling (after offload
succeeds).
2. repeat flowtable test, but with 'ip dscp set cs3' done in
veth0:ingress.
Expect that all packets pass with cs3 dscp field.
3. same as 2, but use veth1:egress. Expect the same outcome.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When running nft_flowtable.sh in VM on a busy server we've found that
the time of the netcat file transfers vary wildly.
Therefore replace hardcoded 3 second sleep with the loop checking for
a change in the file sizes. Once no change in detected we test the results.
Nice side effect is that we shave 1 second sleep in the fast case
(hard-coded 3 second sleep vs two 1 second sleeps).
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Doing wait with no parameters may interfere with some of the tests
having their own background processes.
Although no such test is currently present, the cleanup is useful
to rely on the nft_flowtable.sh for local development (e.g. running
background tcpdump command during the tests).
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some ps commands (e.g. busybox derived) have no -x option. For the
purposes of hash calculation of the list of processes this option is
inessential.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some ps commands (e.g. busybox derived) have no -p option. Use /proc for
pid existence check.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ftrace selftests do not currently produce KTAP output, they produce a
custom format much nicer for human consumption. This means that when run in
automated test systems we just get a single result for the suite as a whole
rather than recording results for individual test cases, making it harder
to look at the test data and masking things like inappropriate skips.
Address this by adding support for KTAP output to the ftracetest script and
providing a trivial wrapper which will be invoked by the kselftest runner
to generate output in this format by default, users using ftracetest
directly will continue to get the existing output.
This is not the most elegant solution but it is simple and effective. I
did consider implementing this by post processing the existing output
format but that felt more complex and likely to result in all output being
lost if something goes seriously wrong during the run which would not be
helpful. I did also consider just writing a separate runner script but
there's enough going on with things like the signal handling for that to
seem like it would be duplicating too much.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
