Commit graph

297,832 commits

Author SHA1 Message Date
Ben Hutchings
30b81cda95 sfc: Remove efx_nic_type::push_multicast_hash operation
Both implementations of efx_nic_type::reconfigure_mac operation
push the multicast hash filter to the hardware.  It is therefore
redundant to call efx_nic_type::push_multicast_hash as well.

efx_mcdi_mac_reconfigure() also uses this operation, but the
implementation for Siena just uses MCDI anyway.  Merge that into
efx_mcdi_mac_reconfigure().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:48 +00:00
Ben Hutchings
1daf417029 sfc: Merge efx_mcdi_mac_check_fault() and efx_mcdi_get_mac_faults()
The latter is only called by the former, which is a very short
wrapper.  Further, gcc 4.5 may currently wrongly warn that the
'faults' variable may be used uninitialised.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:47 +00:00
Ben Hutchings
710b208dc2 sfc: Merge efx_mac_operations into efx_nic_type
No NICs need to switch efx_mac_operations at run-time, and the MAC
operations are fairly closely bound to NIC types.

Move efx_mac_operations::reconfigure to efx_nic_type::reconfigure_mac
and efx_mac_operations::check_fault fo efx_nic_type::check_mac_fault.
Change callers to call through efx->type or directly if the NIC type
is known.

Remove efx_mac_operations::update_stats.  The implementations for
Falcon used to fetch MAC statistics synchronously and this was used by
efx_register_netdev() to clear statistics after running self-tests.
However, it now only converts statistics that have already been
fetched (and that only for Falcon), and the call from
efx_register_netdev() has no effect.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:46 +00:00
Ben Hutchings
1cb345220f sfc: Hold efx_nic::stats_lock while reading efx_nic::mac_stats
efx_nic::stats_lock is used to serialise stats updates, but each
reader was dropping it before it finished reading efx_nic::mac_stats.

If there were concurrent stats reads using procfs, or one using procfs
and one using ethtool, an update could race with a read.  On a 32-bit
system, the reader could see word-tearing of 64-bit stats (32 bits of
the old value and 32 bits of the new).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:45 +00:00
Ben Hutchings
788ec41cc8 sfc: Use new names for MC shared memory layout constants
These are defined alongside the firmware protocol in mcdi_pcol.h.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:44 +00:00
Ben Hutchings
3f713bf4dd sfc: Make handling of MC reboot more reliable
When the MC reboots, either as part of a firmware upgrade or due to a
bug, it attempts to complete (with an error) any requests that were
outstanding before the reboot.  Since there is an inherent race
condition in checking this, it will also write to a status word in
shared memory.

If we look at each of these separately, we may detect each reboot
twice, resulting in a spurious command failure after a firmware
upgrade or frustrating recovery from a firmware bug.  Instead, if a
request completion indicates a reboot, we must poll and clear the
status word.

This bug was previously masked by use of an incorrect address for the
status word.  Fix that, using the definition now included in
mcdi_pcol.h.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:44 +00:00
Ben Hutchings
e332bcb3d1 sfc: Remove fallback for invalid permanent MAC address
By the time we look at the MAC address in efx_probe_port(), either the
driver or the firmware has already validated the board configuration.
The possibility of having an invalid MAC address just isn't worth
considering.  It certainly isn't worth having a compile-time option
for this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:07:38 +00:00
Tony Luck
08dda402d6 x86/mce: Replace hard coded hex constants with symbolic defines
Magic constants like 0x0134 in code just invite questions on
where they come from, what they mean, can they be changed.

Provide #defines for the architecturally defined MCACOD values
with a reference to the Intel Software Developers manual which
describes them.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-26 16:02:22 -08:00
Grazvydas Ignotas
ffa1e4ede4 ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup
hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which
enables internal clock for MMC2. Currently this function is also called
by code handling MMC3, and if .internal_clock is set in platform data
(by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2
instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to
be done). This breaks 2nd SD slot on pandora.

Fix this by changing hsmmc23_before_set_reg() to only handle MMC2.
Note that this removes .remux() call for MMC3, but no board currently
needs it and it's also not called for MMC4 and MMC5.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26 15:54:12 -08:00
Yegor Yefremov
8ef5d844cc ARM: OMAP2+: GPMC: fix device size setup
following statement can only change device size from 8-bit(0) to 16-bit(1),
but not vice versa:

regval |= GPMC_CONFIG1_DEVICESIZE(wval);

so as this field has 1 reserved bit, that could be used in future,
just clear both bits and then OR with the desired value

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26 15:30:30 -08:00
Vaibhav Hiremath
dbc3982ae2 ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter
Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be
selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER
is not set.

In dmtimer_read_sched_clock(), wrong argument was getting passed to
__omap_dm_timer_read_counter() function call; instead of "&clksrc",
we were passing "clksrc.io_base", which results into kernel crash.

To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config
option (and DEBUG_LL) and build/boot the kernel.
This will use dmtimer as a kernel clocksource and lead to kernel
crash during boot  -

[    0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz
[    0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every
165191ms
[    0.000000] Unable to handle kernel paging request at virtual address
00030ef1
[    0.000000] pgd = c0004000
[    0.000000] [00030ef1] *pgd=00000000
[    0.000000] Internal error: Oops: 5 [#1] SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0    Not tainted  (3.3.0-rc1-11574-g0c76665-dirty #3)
[    0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c
[    0.000000] LR is at update_sched_clock+0x10/0x84
[    0.000000] pc : [<c00243b8>]    lr : [<c0018684>]    psr: 200001d3
[    0.000000] sp : c0641f38  ip : c0641e18  fp : 0000000a
[    0.000000] r10: 151c3303  r9 : 00000026  r8 : 76276259
[    0.000000] r7 : 00028547  r6 : c065ac80  r5 : 431bde82  r4 : c0655968
[    0.000000] r3 : 00030ef1  r2 : fb032000  r1 : 00000028  r0 : 00000001

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26 15:27:32 -08:00
Glauber Costa
9018e93948 net: explicitly add jump_label.h header to sock.h
Commit 36a1211970 removed linux/module.h
include statement from one of the headers that end up in net/sock.h.
It was providing us with static_branch() definition implicitly, so
after its removal the build got broken.

To fix this, and avoid having this happening in the future,
let me do the right thing and include linux/jump_label.h
explicitly in sock.h.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 17:13:26 -05:00
Clemens Ladisch
d1bb399ad0 firewire: ohci: add reset packet quirk for SB Audigy
The Audigy's SB1394 controller is actually from Texas Instruments
and has the same bus reset packet generation bug, so it needs the
same quirk entry.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.36+ <stable@vger.kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-26 22:53:17 +01:00
Stefan Gula
f18da14565 net: RTNETLINK adjusting values of min_ifinfo_dump_size
Setting link parameters on a netdevice changes the value
of if_nlmsg_size(), therefore it is necessary to recalculate
min_ifinfo_dump_size.

Signed-off-by: Stefan Gula <steweg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 16:35:57 -05:00
Willem de Bruijn
f2b3ee9e42 ipv6: Fix ip_gre lockless xmits.
Tunnel devices set NETIF_F_LLTX to bypass HARD_TX_LOCK.  Sit and
ipip set this unconditionally in ops->setup, but gre enables it
conditionally after parameter passing in ops->newlink. This is
not called during tunnel setup as below, however, so GRE tunnels are
still taking the lock.

modprobe ip_gre
ip tunnel add test0 mode gre remote 10.5.1.1 dev lo
ip link set test0 up
ip addr add 10.6.0.1 dev test0
 # cat /sys/class/net/test0/features
 # $DIR/test_tunnel_xmit 10 10.5.2.1
ip route add 10.5.2.0/24 dev test0
ip tunnel del test0

The newlink callback is only called in rtnl_netlink, and only if
the device is new, as it calls register_netdevice internally. Gre
tunnels are created at 'ip tunnel add' with ioctl SIOCADDTUNNEL,
which calls ipgre_tunnel_locate, which calls register_netdev.
rtnl_newlink is called at 'ip link set', but skips ops->newlink
and the device is up with locking still enabled. The equivalent
ipip tunnel works fine, btw (just substitute 'method gre' for
'method ipip').

On kernels before /sys/class/net/*/features was removed [1],
the first commented out line returns 0x6000 with method gre,
which indicates that NETIF_F_LLTX (0x1000) is not set. With ipip,
it reports 0x7000. This test cannot be used on recent kernels where
the sysfs file is removed (and ETHTOOL_GFEATURES does not currently
work for tunnel devices, because they lack dev->ethtool_ops).

The second commented out line calls a simple transmission test [2]
that sends on 24 cores at maximum rate. Results of a single run:

ipip:			19,372,306
gre before patch:	 4,839,753
gre after patch:	19,133,873

This patch replicates the condition check in ipgre_newlink to
ipgre_tunnel_locate. It works for me, both with oseq on and off.
This is the first time I looked at rtnetlink and iproute2 code,
though, so someone more knowledgeable should probably check the
patch. Thanks.

The tail of both functions is now identical, by the way. To avoid
code duplication, I'll be happy to rework this and merge the two.

[1] http://patchwork.ozlabs.org/patch/104610/
[2] http://kernel.googlecode.com/files/xmit_udp_parallel.c

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 16:34:08 -05:00
David S. Miller
a7563f342d ipv6: Use ipv6_addr_any()
Suggested by YOSHIFUJI Hideaki.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 16:29:16 -05:00
David S. Miller
c85c21ad1f e1000e: Need to include vmalloc.h
Otherwise (on sparc64):

drivers/net/ethernet/intel/e1000e/ethtool.c:657:3: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration]

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 16:25:55 -05:00
Russell King
9a95b9e741 Merge branch 'sa11x0-mcp-fixes' into fixes 2012-01-26 21:06:54 +00:00
Linus Torvalds
2d3c7efa50 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode_amd: Add support for CPU family specific container files
  x86/amd: Add missing feature flag for fam15h models 10h-1fh processors
  x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf()
  x86/numachip: Drop unnecessary conflict with EDAC
  x86/uv: Fix uninitialized spinlocks
  x86/uv: Fix uv_gpa_to_soc_phys_ram() shift
2012-01-26 12:46:07 -08:00
Linus Torvalds
b57cea5e33 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Call perf_cgroup_event_time() directly
  perf: Don't call release_callchain_buffers() if allocation fails
2012-01-26 12:45:57 -08:00
Linus Torvalds
2437dcbf55 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Add missing __cpuinit annotation in rcutorture code
  sched: Add "const" to is_idle_task() parameter
  rcu: Make rcutorture bool parameters really bool (core code)
  memblock: Fix alloc failure due to dumb underflow protection in memblock_find_in_range_node()
2012-01-26 12:45:41 -08:00
Linus Torvalds
0dbfe8ddaa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix assembler constraint to prevent overeager gcc optimisation
  mac_esp: rename irq
  mac_scsi: dont enable mac_scsi irq before requesting it
  macfb: fix black and white modes
  m68k/irq: Remove obsolete IRQ_FLG_* definitions

Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-26 12:43:57 -08:00
Prarit Bhargava
b0f4c4b32c bugs, x86: Fix printk levels for panic, softlockups and stack dumps
rsyslog will display KERN_EMERG messages on a connected
terminal.  However, these messages are useless/undecipherable
for a general user.

For example, after a softlockup we get:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Stack:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Call Trace:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89

This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.

I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.

For example, in the case of a softlockup we now see the much
more informative:

 Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
 BUG: soft lockup - CPU4 stuck for 60s!

instead of the above confusing messages.

AFAICT, the messages no longer have to be KERN_EMERG.  In the
most important case of a panic we set console_verbose().  As for
the other less severe cases the correct data is output to the
console and /var/log/messages.

Successfully tested by me using the drivers/misc/lkdtm.c module.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:28:45 +01:00
Mika Westerberg
ecfdb0ac15 x86/mrst: Add msic_thermal platform support
This will let the MSIC driver to create platform device for the
thermal driver.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: jacob.jun.pan@linux.intel.com
Link: http://lkml.kernel.org/n/tip-rh1jaft9tjpzfql76gd56h1q@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:23:56 +01:00
Mika Westerberg
15a713df41 x86/config: Select MSIC MFD driver on Intel Medfield platform
On Intel Medfield platform we use MSIC MFD driver to create
necessary platform devices so it is essential to have the driver
compiled into the kernel.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: jacob.jun.pan@linux.intel.com
Link: http://lkml.kernel.org/n/tip-7hp1otk4wf4mg5pqohcwt06w@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:23:55 +01:00
Alan Cox
1a8359e411 x86/mid: Remove Intel Moorestown
All production devices operate in the Oaktrail configuration
with legacy PC elements present and an ACPI BIOS. Continue
stripping out the Moorestown elements from the tree leaving
Medfield.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: jacob.jun.pan@linux.intel.com
Link: http://lkml.kernel.org/n/tip-fvm1hgpq99jln6l0fbek68ik@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:23:53 +01:00
Jacob Pan
d450c088fb x86/mrst: Set ISA bus type for fake MP IRQs
We use MP IRQs for SFI presented timer interrupts, we should
also set mp_bus_not_pci for MP_ISA_BUS so that pin_2_irq mapping
is correct.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Link: http://lkml.kernel.org/n/tip-8h3rc1igpp8ir94aas69qmhk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:23:52 +01:00
Jacob Pan
b3eea29c18 x86/ioapic: Use legacy_pic to set correct gsi-irq mapping
Using compile time NR_LEGACY_IRQS causes the wrong gsi-irq
mapping on non-PC platforms, such as Moorestown. This patch uses
legacy_pic abstraction to set the correct number of legacy
interrupts at runtime. For Moorestown, nr_legacy_irqs = 0. We
have 1:1 mapping for gsi-irq even within the legacy irq range.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Link: http://lkml.kernel.org/n/tip-kzvj4xp9tmicuoqoh2w05iay@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:23:50 +01:00
David S. Miller
1e2927b081 ipv6: sit: Convert to dst_neigh_lookup()
The only semantic difference is that we now hold a reference to the
neighbour and thus have to release it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 15:23:21 -05:00
David S. Miller
39232973b7 ipv4/ipv6: Prepare for new route gateway semantics.
In the future the ipv4/ipv6 route gateway will take on two types
of values:

1) INADDR_ANY/IN6ADDR_ANY, for local network routes, and in this case
   the neighbour must be obtained using the destination address in
   ipv4/ipv6 header as the lookup key.

2) Everything else, the actual nexthop route address.

So if the gateway is not inaddr-any we use it, otherwise we must use
the packet's destination address.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26 15:22:32 -05:00
Jan Beulich
9d8e22777e x86-64: Handle byte-wise tail copying in memcpy() without a loop
While hard to measure, reducing the number of possibly/likely
mis-predicted branches can generally be expected to be slightly
better.

Other than apparent at the first glance, this also doesn't grow
the function size (the alignment gap to the next function just
gets smaller).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F218584020000780006F422@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:19:20 +01:00
Jan Beulich
2ab560911a x86-64: Fix memcpy() to support sizes of 4Gb and above
While currently there doesn't appear to be any reachable in-tree
case where such large memory blocks may be passed to memcpy(),
we already had hit the problem in our Xen kernels. Just like
done recently for mmeset(), rather than working around it,
prevent others from falling into the same trap by fixing this
long standing limitation.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F21846F020000780006F3FA@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:19:18 +01:00
Jan Beulich
fc395b9291 x86: Properly parenthesize cmpxchg() macro arguments
Quite oddly, all of the arguments passed through from the top
level macros to the second level which didn't need parentheses
had them, while the only expression (involving a parameter)
needing them didn't.

Very recently I got bitten by the lack thereof when using
something like "array + index" for the first operand, with
"array" being an array more narrow than int.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F2183A9020000780006F3E6@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:18:29 +01:00
Russell King
60db4fcf14 ARM: pgtable: get rid of TOP_PTE()
Get rid of the TOP_PTE() macro as we now have proper accessor functions
instead.  No one should be directly referencing the top pte table
anymore.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 20:07:59 +00:00
Russell King
0d31fe47b0 ARM: pgtable: provide get_top_pte() to complement set_top_pte()
Provide get_top_pte() to complement set_top_pte(), moving the only
users of TOP_PTE to arch/arm/mm/mm.h.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 20:07:41 +00:00
Russell King
67ece14431 ARM: pgtable: consolidate set_pte_ext(TOP_PTE,...) + tlb flush
A number of places establish a PTE in our top page table and
immediately flush the TLB.  Rather than having this at every callsite,
provide an inline function for this purpose.

This changes some global tlb flushes to be local; each time we setup
one of these mappings, we always do it with preemption disabled which
would prevent us migrating to another CPU.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 20:06:28 +00:00
Russell King
6e78df1761 ARM: pgtable: use mk_pte rather than pfn_pte(page_to_pfn())
mk_pte is provided to do this translation for us, so use it rather
than open-coding it in the copypage code.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 20:06:22 +00:00
Russell King
de27c30822 ARM: pgtable: move TOP_PTE address definitions to arch/arm/mm/mm.h
Move the TOP_PTE address definitions to one central place so that it's
easy to discover what they're being used for.  This helps to ensure
that there are no overlaps.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 20:06:14 +00:00
Josef Bacik
9b23062840 Btrfs: advance window_start if we're using a bitmap
If we span a long area in a bitmap we could end up taking a lot of time
searching to the next free area if we're searching from the original
window_start, so advance window_start in order to make sure we don't do any
superficial searching.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
David Sterba
0c4e538bcc btrfs: mask out gfp flags in releasepage
btree_releasepage is a callback and can be passed unknown gfp flags and then
they may end up in kmem_cache_alloc called from alloc_extent_state, slab
allocator will BUG_ON when there is HIGHMEM or DMA32 flag set.

This may happen when btrfs is mounted from a loop device, which masks out
__GFP_IO flag. The check in try_release_extent_state

3399                 if ((mask & GFP_NOFS) == GFP_NOFS)
3400                         mask = GFP_NOFS;

will not work and passes unfiltered flags further resulting in crash at
mm/slab.c:2963

 [<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8
 [<000000000024c810>] kmem_cache_alloc+0x204/0x294
 [<00000000001fd3c2>] mempool_alloc+0x52/0x170
 [<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs]
 [<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs]
 [<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs]
 [<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs]
 [<0000000000210d84>] shrink_page_list+0x6a0/0x724
 [<0000000000211394>] shrink_inactive_list+0x230/0x578
 [<0000000000211bb8>] shrink_list+0x6c/0x120
 [<0000000000211e4e>] shrink_zone+0x1e2/0x228
 [<0000000000211f24>] shrink_zones+0x90/0x254
 [<0000000000213410>] do_try_to_free_pages+0xac/0x420
 [<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0
 [<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8
 [<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Miao Xie
9e622d6bea Btrfs: fix enospc error caused by wrong checks of the chunk
When we did sysbench test for inline files, enospc error happened easily though
there was lots of free disk space which could be allocated for new chunks.

Reproduce steps:
 # mkfs.btrfs -b $((2 * 1024 * 1024 * 1024)) <test partition>
 # mount <test partition> /mnt
 # ulimit -n 102400
 # cd /mnt
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr prepare
 # sysbench --num-threads=1 --test=fileio --file-num=81920 \
 > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \
 > --file-test-mode=seqwr run
 <soon later, BUG_ON() was triggered by enospc error>

The reason of this bug is:
Now, we can reserve space which is larger than the free space in the chunks if
we have enough free disk space which can be used for new chunks. By this way,
the space allocator should allocate a new chunk by force if there is no free
space in the free space cache. But there are two wrong checks which break this
operation.

One is
	if (ret == -ENOSPC && num_bytes > min_alloc_size)
in btrfs_reserve_extent(), it is wrong, we should try to allocate a new chunk
even we fail to allocate free space by minimum allocable size.

The other is
	if (space_info->force_alloc)
		force = space_info->force_alloc;
in do_chunk_alloc(). It makes the allocator ignore CHUNK_ALLOC_FORCE If someone
sets ->force_alloc to CHUNK_ALLOC_LIMITED, and makes the enospc error happen.

Fix these two wrong checks. Especially the second one, we fix it by changing
the value of CHUNK_ALLOC_LIMITED and CHUNK_ALLOC_FORCE, and make
CHUNK_ALLOC_FORCE greater than CHUNK_ALLOC_LIMITED since CHUNK_ALLOC_FORCE has
higher priority. And if the value which is passed in by the caller is greater
than ->force_alloc, use the passed value.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Liu Bo
7ec31b548a Btrfs: do not defrag a file partially
xfstests 218 complains that btrfs defrags a file partially:
 After: 1
 Write backwards sync, but contiguous - should defrag to 1 extent
 Before: 10
-After: 1
+After: 2

To fix this, we need to set max_to_defrag count properly.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:12 -05:00
Stefan Behrens
0b485143d8 Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c
There have been 4 warnings on 32-bit build, they are herewith fixed.

Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik
0b4a9d248f Btrfs: use cluster->window_start when allocating from a cluster bitmap
We specifically set window_start in the cluster struct to indicate where the
cluster starts in a bitmap, but we've been using min_start to indicate where
we're searching from.  This is usually the start of the blockgroup, so
essentially means we're constantly searching from the start of any bitmap we
find, which completely negates all the trouble we go to in order to setup a
cluster.  So start using window_start to make sure we actually use the area we
found.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Mitch Harder
8bedd51b61 Btrfs: Check for NULL page in extent_range_uptodate
A user has encountered a NULL pointer kernel oops in btrfs when
encountering media errors.  The problem has been identified
as an unhandled NULL pointer returned from find_get_page().
This modification simply checks for a NULL page, and returns
with an error if found (the extent_range_uptodate() function
returns 1 on errors).

After testing this patch, the user reported that the error with
the NULL pointer oops was solved.  However, there is still a
remaining problem with a thread becoming stuck in
wait_on_page_locked(page) in the read_extent_buffer_pages(...)
function in extent_io.c

       for (i = start_i; i < num_pages; i++) {
               page = extent_buffer_page(eb, i);
               wait_on_page_locked(page);
               if (!PageUptodate(page))
                       ret = -EIO;
       }

This patch leaves the issue with the locked page yet to be resolved.

Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Kara
6dd70ce4eb btrfs: Fix busyloops in transaction waiting code
wait_log_commit() and wait_for_writer() were using slightly different
conditions for deciding whether they should call schedule() and whether they
should continue in the wait loop. Thus it could happen that we busylooped when
the first condition was not true while the second one was. That is burning CPU
cycles needlessly and is deadly on UP machines...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Josef Bacik
357b9784b7 Btrfs: make sure a bitmap has enough bytes
We have only been checking for min_bytes available in bitmap entries, but we
won't successfully setup a bitmap cluster unless it has at least bytes in the
bitmap, so in the common case min_bytes is 4k and we want something like 2MB, so
if there are a bunch of bitmap entries with less than 2mb's in them, we'll
search all them anyway, which is suboptimal.  Fix this check.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Jan Schmidt
b1375d64c5 Btrfs: fix uninit warning in backref.c
Added initialization with the declaration of ret. It isn't set later on the
switch-default branch (which should never be taken).

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-26 15:01:11 -05:00
Russell King
dcf81c1af8 Merge branch 'amba' into for-armsoc 2012-01-26 19:59:44 +00:00
Russell King
75c06963dd ARM: amba: samsung: use common amba device initializers
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-26 19:59:30 +00:00