[ Upstream commit 014eccc9da ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-7-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e5646178 ]
We regularly get dmesg error reports of:
[ 18.184066] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[ 18.184098] MAI: soc_pcm_open() failed (-19)
These are generated for any disconnected hdmi interface when pulseaudio
attempts to open the associated ALSA device (numerous times). Each open
generates a kernel error message, generating general log spam.
The error messages all come from _soc_pcm_ret in sound/soc/soc-pcm.c#L39
which suggests returning ENOTSUPP, rather that ENODEV will be quiet.
And indeed it is.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-5-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f756dbac1c upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 689275140c upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf424020e0 upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9b8dcabb5 upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abe1cbaec6 upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63e7ee677c upstream.
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a29997b7ac upstream.
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24d3749c11 upstream.
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6fa67d26d upstream.
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d49e77a97 upstream.
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1443dd3c67 upstream.
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33114f1057 upstream.
Add MEC version from which alternate support for no PCIe atomics
is provided so that device is not skipped during KFD device init in
GFX1200/GFX1201.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2fccac61 upstream.
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
Cc: <stable@vger.kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125205314.1725887-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55ed120dcf upstream.
Cacheline size is not available in IP discovery for gc943,gc944.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c98b10496b ]
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c33a93201c ]
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e982310c9c ]
Viewport size excess surface size observed sometime with some timings or
resizing the MPO video window to cause MPO unsupported. Calculate final
viewport size first with a 100x100 dummy viewport to get the max TAP
support and then re-run final viewport calculation if TAP value changed.
Removed obsolete preliminary viewport calculation for TAP validation.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: c33a93201c ("drm/amd/display: Ignore scalar validation failure if pipe is phantom")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a3e6079bd9 upstream.
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.
Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fef253c94 upstream.
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27227a234c upstream.
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states.
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da868898cf upstream.
As per power team, there is no need to impose a lower bound on arcturus
power limit. Any unreasonable limit set will result in frequent
throttling.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 349af06a3a upstream.
There is a strapping issue on NBIO 7.11.x that can lead to spurious PME
events while in the D0 state.
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241118174611.10700-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 902fbbf429 upstream.
Earlier ASICs have strap information exported, and this is missing
for NBIO 7.11.0.
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: ca8c68142a ("drm/amdgpu: add nbio 7.11 registers")
Link: https://lore.kernel.org/r/20241118174611.10700-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6719ab8234 upstream.
add gen5 display to the user on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdc6705f98 upstream.
Write pointer could be 32-bit or 64-bit. Use the correct size during
initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87651f31ae upstream.
Currently in some testcases we can trigger:
xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed!
....
WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe]
xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57
Looking at a snippet of corresponding ftrace for this GuC id we can see:
162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3
162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0
162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0
162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0
It looks like we try to suspend the queue (opcode=3), setting
suspend_pending and triggering a disable_scheduling. The user then
closes the queue. However the close will also forcefully signal the
suspend fence after killing the queue, later when the G2H response for
disable_scheduling comes back we have now cleared suspend_pending when
signalling the suspend fence, so the disable_scheduling now incorrectly
tries to also deregister the queue. This leads to warnings since the queue
has yet to even be marked for destruction. We also seem to trigger
errors later with trying to double unregister the same queue.
To fix this tweak the ordering when handling the response to ensure we
don't race with a disable_scheduling that didn't actually intend to
perform an unregister. The destruction path should now also correctly
wait for any pending_disable before marking as destroyed.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3371
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122161914.321263-6-matthew.auld@intel.com
(cherry picked from commit f161809b36)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c78f439918 upstream.
On some HW we want to avoid the host caching PTEs, since access from GPU
side can be incoherent. However here the special migrate object is
mapping PTEs which are written from the host and potentially cached. Use
XE_BO_FLAG_PAGETABLE to ensure that non-cached mapping is used, on
platforms where this matters.
Fixes: 7a060d786c ("drm/xe/mtl: Map PPGTT as CPU:WC")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-4-matthew.auld@intel.com
(cherry picked from commit febc689b27)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23346f8516 upstream.
XE_CACHE_WB must be converted into the per-platform pat index for that
particular caching mode, otherwise we are just encoding whatever happens
to be the value of that enum.
Fixes: e8babb280b ("drm/xe: Convert multiple bind ops into single job")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-3-matthew.auld@intel.com
(cherry picked from commit f3dc9246f9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55858fa7eb upstream.
Several OA registers and allowlist registers were missing from the
save/restore list for GuC and could be lost during an engine reset. Add
them to the list.
v2:
- Fix commit message (Umesh)
- Add missing closes (Ashutosh)
v3:
- Add missing fixes (Ashutosh)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2249
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Suggested-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: stable@vger.kernel.org # v6.11+
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023200716.82624-1-jonathan.cavitt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71ba1c9b1c upstream.
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init.
zynqmp_dpsub_kms_init creates the connector and without it we don't
enable hotplug detection.
Fixes: eb2d64bfcc ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f8dbadef0 upstream.
The shader L1 cache is a writeback cache for shader loads/stores
and thus must be flushed before any BOs backing the shader buffers
are potentially freed.
Cc: stable@vger.kernel.org
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5f3f21728 upstream.
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f708e8b4cf upstream.
Early exits (goto, break, return) from for_each_child_of_node() required
an explicit call to of_node_put(), which was not introduced with the
break if cnt == MAX_CRTC.
Add the missing of_node_put() before the break.
Cc: stable@vger.kernel.org
Fixes: d761b9450e ("drm/mediatek: Add cnt checking for coverity issue")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241011-mtk_drm_drv_memleak-v1-1-2b40c74c8d75@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67c40c9b2e upstream.
Commit 808a40b694 ("drm/fbdev-dma: Implement damage handling and
deferred I/O") added deferred I/O for fbdev-dma. Also select the
Kconfig symbol FB_DEFERRED_IO (via FB_DMAMEM_HELPERS_DEFERRED). Fixes
build errors about missing fbdefio, such as
drivers/gpu/drm/drm_fbdev_dma.c:218:26: error: 'struct drm_fb_helper' has no member named 'fbdefio'
218 | fb_helper->fbdefio.delay = HZ / 20;
| ^~
drivers/gpu/drm/drm_fbdev_dma.c:219:26: error: 'struct drm_fb_helper' has no member named 'fbdefio'
219 | fb_helper->fbdefio.deferred_io = drm_fb_helper_deferred_io;
| ^~
drivers/gpu/drm/drm_fbdev_dma.c:221:21: error: 'struct fb_info' has no member named 'fbdefio'
221 | info->fbdefio = &fb_helper->fbdefio;
| ^~
drivers/gpu/drm/drm_fbdev_dma.c:221:43: error: 'struct drm_fb_helper' has no member named 'fbdefio'
221 | info->fbdefio = &fb_helper->fbdefio;
| ^~
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410050241.Mox9QRjP-lkp@intel.com/
Fixes: 808a40b694 ("drm/fbdev-dma: Implement damage handling and deferred I/O")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014085740.582287-4-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e965e771b0 upstream.
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure.
Cc: stable@vger.kernel.org
Fixes: dd86dc2f9a ("drm/sti: implement atomic_check for the planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909063359.1197065-1-make24@iscas.ac.cn
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
