Commit graph

323,142 commits

Author SHA1 Message Date
Johannes Berg
a1845fc7c5 mac80211: add TX prepare API
Some drivers require setup before being able to send
management frames in managed mode, in particular in
multi-channel cases.

Introduce API to allow the drivers to do such setup
while being able to sleep waiting for the setup to
finish in the device. This isn't possible inside the
TX call since that can't sleep.

A future patch may also restructure the TX retry to
wait for the driver to report the frame status, as
suggested by Arik in
http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.com

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03 13:50:34 +02:00
Johannes Berg
1b083ea4c0 mac80211_hwsim: fix NUM_BANDS usage
Due to the recent change of NUM_BANDS from 2 to 3 hwsim
broke. Fix the code by using the right constant but don't
support bands other than 2.4 and 5 GHz.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03 13:50:32 +02:00
Thomas Huehn
e3e1a0bcb3 mac80211: reduce IEEE80211_TX_MAX_RATES
IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there
is no current hardware supporting a rate chain with 5 multi
rate stages (mrr), so 4 mrr stages are sufficient.

The memory that is freed within the ieee80211_tx_info struct
will be used in the upcoming Transmission Power Control (TPC)
implementation.

Suggested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03 13:48:37 +02:00
Paul Mundt
75331a597c security: Fix nommu build.
The security + nommu configuration presently blows up with an undefined
reference to BDI_CAP_EXEC_MAP:

security/security.c: In function 'mmap_prot':
security/security.c:687:36: error: dereferencing pointer to incomplete type
security/security.c:688:16: error: 'BDI_CAP_EXEC_MAP' undeclared (first use in this function)
security/security.c:688:16: note: each undeclared identifier is reported only once for each function it appears in

include backing-dev.h directly to fix it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-07-03 21:41:03 +10:00
Uri Yosef
3319f69715 arm/dts: OMAP4: Add Variscite OMAP4 System-On-Modeule support
Add Variscite OMAP4 System-On-Modeule support

Signed-off-by: Uri Yosef <uri.y@variscite.com>
[tony@atomide.com: updated to use disabled instead of disable]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-03 04:04:21 -07:00
AnilKumar Ch
6a66a8b29d arm/dts: Add support for AM335x BeagleBone
Add AM335X BeagleBone device tree source (am335x-evm.dts) file
to use the am33xx.dtsi SoC file, along with the memory node
information.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-03 04:04:15 -07:00
AnilKumar Ch
32bb00e01d arm/dts: Add support for AM335x EVM
Add AM335X EVM device tree source (am335x-evm.dts) file to
use the am33xx.dtsi SoC file, along with the memory node
information.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-03 04:04:08 -07:00
AnilKumar Ch
5fc0b42a98 arm/dts: Add initial DT support for AM33XX SoC family
Add device tree source include file for the AM33XX SoC family.
An additional .dtsi file is created to describe the generic
AM33XX CPU module like intc, ocp.

Actual selection of available peripherals is handled in seperate
.dts files using this am33xx.dtsi generic header file.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-07-03 04:03:58 -07:00
Daniel Vetter
9f846a16d2 drm/i915: kick any firmware framebuffers before claiming the gtt
Especially vesafb likes to map everything as uc- (yikes), and if that
mapping hangs around still while we try to map the gtt as wc the
kernel will downgrade our request to uc-, resulting in abyssal
performance.

Unfortunately we can't do this as early as readon does (i.e. as the
first thing we do when initializing the hw) because our fb/mmio space
region moves around on a per-gen basis. So I've had to move it below
the gtt initialization, but that seems to work, too. The important
thing is that we do this before we set up the gtt wc mapping.

Now an altogether different question is why people compile their
kernels with vesafb enabled, but I guess making things just work isn't
bad per se ...

v2:
- s/radeondrmfb/inteldrmfb/
- fix up error handling

v3: Kill #ifdef X86, this is Intel after all. Noticed by Ben Widawsky.

v4: Jani Nikula complained about the pointless bool primary
initialization.

v5: Don't oops if we can't allocate, noticed by Chris Wilson.

v6: Resolve conflicts with agp rework and fixup whitespace.

This is commit e188719a28 in drm-next.

Backport to 3.5 -fixes queue requested by Dave Airlie - due to grub
using vesa on fedora their initrd seems to load vesafb before loading
the real kms driver. So tons more people actually experience a
dead-slow gpu. Hence also the Cc: stable.

Cc: stable@vger.kernel.org
Reported-and-tested-by: "Kilarski, Bernard R" <bernard.r.kilarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-03 11:18:48 +01:00
Takashi Iwai
7b668ebe2f drm: edid: Don't add inferred modes with higher resolution
When a monitor EDID doesn't give the preferred bit, driver assumes
that the mode with the higest resolution and rate is the preferred
mode.  Meanwhile the recent changes for allowing more modes in the
GFT/CVT ranges give actually more modes, and some modes may be over
the native size.  Thus such a mode would be picked up as the preferred
mode although it's no native resolution.

For avoiding such a problem, this patch limits the addition of
inferred modes by checking not to be greater than other modes.
Also, it checks the duplicated mode entry at the same time.

Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-03 11:18:10 +01:00
Jerome Glisse
1ef5325b23 drm/radeon: fix rare segfault
In gem idle/busy ioctl the radeon object was derefenced after
drm_gem_object_unreference_unlocked which in case the object
have been destroyed lead to use of a possibly free pointer with
possibly wrong data.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-03 11:17:09 +01:00
NeilBrown
b357f04a67 md: fix up plugging (again).
The value returned by "mddev_check_plug" is only valid until the
next 'schedule' as that will unplug things.  This could happen at any
call to mempool_alloc.
So just calling mddev_check_plug at the start doesn't really make
sense.

So call it just before, or just after, queuing things for the thread.
As the action that happens at unplug is to wake the thread, this makes
lots of sense.
If we cannot add a plug (which requires a small GFP_ATOMIC alloc) we
wake thread immediately.

RAID5 is a bit different.  Requests are queued for the thread and the
thread is woken by release_stripe.  So we don't need to wake the
thread on failure.
However the thread doesn't perform certain actions when there is any
active plug, so it is important to install a plug before waking the
thread.  So for RAID5 we install the plug *before* queuing the request
and waking the thread.

Without this patch it is possible for raid1 or raid10 to queue a
request without then waking the thread, resulting in the array locking
up.

Also change raid10 to only flush_pending_write when there are not
active plugs, just like raid1.

This patch is suitable for 3.0 or later.  I plan to submit it to
-stable, but I'll like to let it spend a few weeks in mainline
first to be sure it is completely safe.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 17:45:31 +10:00
Hui Wang
30c1e67204 can: flexcan: add hardware controller version support
At least in the i.MX series, the flexcan contrller divides into ver_3
and ver_10, current driver is for ver_3 controller.

i.MX6 has ver_10 controller, it has more reigsters than ver_3 has.
The rxfgmask (Rx FIFO Global Mask) register is one of the new added.
Its reset value is 0xffffffff, this means ID Filter Table must be
checked when receive a packet, but the driver is designed to accept
everything during the chip start, we need to clear this register to
follow this design.

Use the data entry of the struct of_device_id to point chip specific
info, we can set hardware version for each platform.

Cc: linux-can@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
[mkl: add id_table support]
Tested-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-07-03 09:33:00 +02:00
Huang Shijie
b9f25f8632 ARM: dts: mx23: add gpmi nand support
Add DT node for gpmi nand.
Also add pinctrl for gpmi nand.

Enable the gpmi-nand in mx23-evk board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 15:17:46 +08:00
Takashi Iwai
81fcb17085 ALSA: Move some headers to local directories from include/sound
This is a bit clean up of public sound header directory.
Some header files in include/sound aren't really necessary to be
located there but can be moved to their local directories gracefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:09 +02:00
Takashi Iwai
2cb1331d9d ALSA: pdaudiocf: Remove superfluous pm_message_t argument from suspend
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:08 +02:00
Takashi Iwai
68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
NeilBrown
f456309106 md: support re-add of recovering devices.
We currently only allow a device to be re-added if it appear to be
in-sync.  This is overly restrictive as it may be desirable to re-add
a device that is in the middle of recovery.

So remove the test for "InSync" - the test on rdev->raid_disk is
sufficient to ensure that the re-add will succeed.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:59:06 +10:00
NeilBrown
32644afd89 md/raid1: fix bug in read_balance introduced by hot-replace
When we added hot_replace we doubled the number of devices
that could be in a RAID1 array.  So we doubled how far read_balance
would search.  Unfortunately we didn't double the point at which
it looped back to the beginning - so it effectively loops over
all non-replacement disks twice.
This doesn't cause bad behaviour, but it pointless and means we
never read from replacement devices.

Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:58:42 +10:00
Takashi Iwai
284e7ca75f ALSA: convert PM ops of platform_driver to new pm ops
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 07:58:19 +02:00
Shaohua Li
fab363b5ff raid5: delayed stripe fix
There isn't locking setting STRIPE_DELAYED and STRIPE_PREREAD_ACTIVE bits, but
the two bits have relationship. A delayed stripe can be moved to hold list only
when preread active stripe count is below IO_THRESHOLD. If a stripe has both
the bits set, such stripe will be in delayed list and preread count not 0,
which will make such stripe never leave delayed list.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:57:19 +10:00
majianpeng
2e8ac30312 md/raid456: When read error cannot be recovered, record bad block
We may not be able to fix a bad block if:
 - the array is degraded
 - the over-write fails.

In these cases we currently eject the device, but we should
record a bad block if possible.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:57:02 +10:00
NeilBrown
0232605d98 md: make 'name' arg to md_register_thread non-optional.
Having the 'name' arg optional and defaulting to the current
personality name is no necessary and leads to errors, as when
changing the level of an array we can end up using the
name of the old level instead of the new one.

So make it non-optional and always explicitly pass the name
of the level that the array will be.

Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:56:52 +10:00
NeilBrown
055d3747db md/raid10: fix failure when trying to repair a read error.
commit 58c54fcca3
     md/raid10: handle further errors during fix_read_error better.

in 3.1 added "r10_sync_page_io" which takes an IO size in sectors.
But we were passing the IO size in bytes!!!
This resulting in bio_add_page failing, and empty request being sent
down, and a consequent BUG_ON in scsi_lib.

[fix missing space in error message at same time]

This fix is suitable for 3.1.y and later.

Cc: stable@vger.kernel.org
Reported-by: Christian Balzer <chibi@gol.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-03 15:55:33 +10:00
Shawn Guo
a915ee4218 ARM: dts: mxs: add lcd support for imx23-evk and imx28-evk
Add lcd support for imx23-evk and imx28-evk.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:27:56 +08:00
Shawn Guo
52f7176bd2 ARM: dts: mxs: add pwm-backlight for imx23-evk and imx28-evk
Add pwm device and pwm-backlight for imx23-evk and imx28-evk.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:26:49 +08:00
Shawn Guo
f98c990c18 ARM: dts: mxs: enable rtc for imx23 and imx28
Enable rtc for imx23 and imx28.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:42 +08:00
Shawn Guo
a600e3335b ARM: dts: imx28-evk: add heartbeat gpio-leds
Add heartbeat gpio-leds for imx28-evk board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:34 +08:00
Shawn Guo
c9987c8106 ARM: dts: imx28-evk: add missing properties for fec
Add missing properties for fec, phy-supply, phy-reset-gpios and
phy-reset-duration, which are required by fec driver for successfully
probe fec from device tree, if bootloader hasn't set those things up.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:21 +08:00
Shawn Guo
64edbcdd9c ARM: dts: imx28-evk: add vmmc-supply for mmc device
Add vmmc-supply for mmc device, so that the power to mmc slot can be
turned on by mmc driver if bootloader hasn't done it.

Also remove "okay" status for mmc1/ssp1, as the device has pin conflict
with gpmi-nand.  Actually the device is already disabled since the
mxs-mmc driver adopts pinctrl support because there is no pinctrl setup
for the device in dts.  Make this explicit by removing "okay" status.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:12 +08:00
Shawn Guo
a450839432 ARM: dts: imx23-evk: add auart device
Add auart device for imx23-evk board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:06 +08:00
Shawn Guo
72beabae63 ARM: dts: imx23-evk: updates for mmc device
The 8-bit mode mmc has pin conflicts with display.  Let's use 4-bit
mode by default, so that display can be enabled together later.

Also add vmmc-supply for mmc device.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:25:00 +08:00
Shawn Guo
d54dbb5000 ARM: dts: mxs: add hog-gpios for imx23-evk and imx28-evk
Before gpio_request can directly ask pinctrl system to configure the
requested pin into gpio mode, we use "hog" entry (pinctrl state of
pin controller itself) to configure gpios.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:24:54 +08:00
Shawn Guo
f14da76788 ARM: dts: mxs: add comments for pinmux-ids
Add comments for pinmux-ids so that we do not have to keep looking at
Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt to read
all these pinmux-ids.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:24:50 +08:00
Shawn Guo
ab2815c399 ARM: mxs: use auxdata to attach mxsfb_platform_data
Use auxdata to attach mxsfb_platform_data for imx23-evk and imx28-evk.
We take this as a temporary solution for removing those board files,
and it should be updated to use common bindings for struct fb_videomode
when it becomes available.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Shawn Guo
73fc610f9a video: mxsfb: add simple device tree probe
Add a simple device tree probe support for mxsfb driver.  Before
a common binding for struct fb_videomode is available, the driver will
keep using struct mxsfb_platform_data.  That said, platform code will
use auxdata to attach mxsfb_platform_data for device tree boot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Shawn Guo
ce4409b582 video: mxsfb: move mxsfb.h into include/linux
Move mxsfb.h into include/linux, so that mxsfb driver does not have to
include <mach/*> header.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:37 +08:00
Marek Vasut
dd8d20a3f3 rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtc
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: rtc-linux@googlegroups.com
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Marc Kleine-Budde
e1d4f23ec0 ARM: mxs: enable flexcan on imx28
As the flexcan driver has DT binding for some time now. This patch makes
the flexcan driver available in the can drivers menu if a SOC with flexcan
is enabled.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
f34ffc9efc ARM: dts: cfa10036: Add Power LED to the CFA-10036 board
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
330eaaf947 ARM: mxs: Add Crystalfontz CFA-10036 DTS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lily <brian@crystalfontz.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:36 +08:00
Maxime Ripard
8385e7c1db ARM: dts: imx28: Add additionnal muxing options to iMX28 DTSI
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lily <brian@crystalfontz.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Shawn Guo
5653acc24c ARM: mxs: store mac address read from OTP in device tree
The non-DT boot reads the mac from OTP and pass it to fec driver via
platform data.  The patch provides an equivalent support for device
tree boot, with reading mac from OTP and store it in device tree,
and fec driver can get the mac from device tree at its probe time.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Fabio Estevam
80d969e491 ARM: dts: mx28evk: Add auart0 and auart3 support
Add auart0 and auart3 support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Fabio Estevam
1ea6607d4c serial: mxs-auart: Allow device tree probing
Allow device tree probing.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:35 +08:00
Marek Vasut
a217c46c2e ARM: dts: imx23: Fix the gpmi/gpmi-nand DT name
Replace "gpmi" with "gpmi-nand" to get the
GPMI interface probing with DT instead of
failing to get clock.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
CC: Dong Aisheng <b29396@freescale.com>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:34 +08:00
Huang Shijie
7a8e5149ef ARM: mx28: add gpmi-nand support
add gpmi-nand device tree support.
add gpmi-nand pinctrl support.

Also enable the gpmi support for mx28-evk board.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-03 13:22:34 +08:00
Scott Wood
a8b91e43af powerpc/mm: remove obsolete comment about page size name array
The array of names in hugetlbpage.c no longer exists.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:50 +10:00
Paul Bolle
09d5472a08 powerpc: Kill flatdevtree_env.h too
Commit 430b01e8f5 ("[POWERPC] Kill
flatdevtree.c") killed the two files including flatdevtree_env.h. It was
apparently just an oversight to not kill that header too. Kill it now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:50 +10:00
Wanpeng Li
f0a875fd3f powerpc: Fix kernel-doc warning
Warning(arch/powerpc/kernel/pci_of_scan.c:210): Excess function parameter 'node' description in 'of_scan_pci_bridge'
Warning(arch/powerpc/kernel/vio.c:636): No description found for parameter 'desired'
Warning(arch/powerpc/kernel/vio.c:636): Excess function parameter 'new_desired' description in 'vio_cmo_set_dev_desired'
Warning(arch/powerpc/kernel/vio.c:1270): No description found for parameter 'viodrv'
Warning(arch/powerpc/kernel/vio.c:1270): Excess function parameter 'drv' description in '__vio_register_driver'
Warning(arch/powerpc/kernel/vio.c:1289): No description found for parameter 'viodrv'
Warning(arch/powerpc/kernel/vio.c:1289): Excess function parameter 'driver' description in 'vio_unregister_driver'

Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:49 +10:00