Commit graph

323,142 commits

Author SHA1 Message Date
Ben Chan
9f77186dd1 staging: gdm72xx: Release netlink socket properly
This patch modifies the gdm72xx driver to properly release a netlink
socket using netlink_kernel_release. It fixes the following kernel
crash, which occurs after repeatedly suspending and resuming a system.

   kernel BUG at /home/benchan/trunk/src/third_party/kernel/files/mm/slub.c:3471!
   invalid opcode: 0000 [#1] SMP
   CPU 2
   Modules linked in: asix usbnet snd_hda_codec_hdmi
   snd_hda_codec_cirrus i2c_dev uinput snd_hda_intel snd_hda_codec
   snd_hwdep snd_pcm snd_timer bluetooth snd_page_alloc fuse aesni_intel
   cryptd isl29018(C) aes_x86_64 industrialio(C) memconsole nm10_gpio
   rtc_cmos nf_conntrack_ipv6 nf_defrag_ipv6 r8169 ath9k mac80211
   ip6table_filter ath9k_common ath9k_hw ath cfg80211 xt_mark ip6_tables
   uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops
   gdmwm(C) joydev

   Pid: 3125, comm: kworker/u:30 Tainted: G        WC   3.4.0 #1
   RIP: 0010:[<ffffffff810cda19>]  [<ffffffff810cda19>] kfree+0x67/0xca
   RSP: 0018:ffff880134977d60  EFLAGS: 00010246
   RAX: 4000000000000400 RBX: ffffffff818832a0 RCX: 0000000000000000
   RDX: 4000000000000000 RSI: 0000000000000000 RDI: ffffffff818832a0
   RBP: ffff880134977d80 R08: 00000000ffffffff R09: ffffea00000620c0
   R10: ffffffff8111b729 R11: ffff880149fb3840 R12: ffffffff81a08840
   R13: ffffffff813f5bc3 R14: ffffffff8138ed84 R15: 0000000000000000
   FS:  0000000000000000(0000) GS:ffff88014fb00000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
   CR2: 00007f7cad963110 CR3: 000000000180b000 CR4: 00000000000407e0
   DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
   Process kworker/u:30 (pid: 3125, threadinfo ffff880134976000, task ffff8801330647e0)
   Stack:
    0000000000000002 ffffffff818832a0 ffffffff81a08840 ffff880134977df0
    ffff880134977da0 ffffffff813f5bc3 ffff880134977df0 ffffffff81883250
    ffff880134977dd0 ffffffff8138e64c 0000000180150010 ffffffff81883250
   Call Trace:
    [<ffffffff813f5bc3>] ipv4_sysctl_exit_net+0x23/0x27
    [<ffffffff8138e64c>] ops_exit_list+0x27/0x50
    [<ffffffff8138ee72>] cleanup_net+0xee/0x17c
    [<ffffffff81040c64>] process_one_work+0x199/0x2b8
    [<ffffffff810416e4>] worker_thread+0x13c/0x222
    [<ffffffff810415a8>] ? manage_workers.isra.26+0x171/0x171
    [<ffffffff8104506d>] kthread+0x8b/0x93
    [<ffffffff8145b414>] kernel_thread_helper+0x4/0x10
    [<ffffffff81044fe2>] ? __init_kthread_worker+0x39/0x39
    [<ffffffff8145b410>] ? gs_change+0xb/0xb
   Code: 83 c4 10 49 83 3c 24 00 eb e4 48 83 fb 10 76 76 48 89 df e8 17
   e1 ff ff 49 89 c1 48 8b 00 a8 80 75 15 49 f7 01 00 c0 00 00 75 02
   <0f> 0b 4c 89 cf e8 b8 b4 fd ff eb 4f 4c 8b 55 08 49 8b 79 30 48
   RIP  [<ffffffff810cda19>] kfree+0x67/0xca
    RSP <ffff880134977d60>

Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:28:46 -07:00
Jiri Kosina
a529ae4ba3 iio: drop wrong reference from Kconfig
The documentation lives in drivers/staging/iio/Documentation, but
according to Jonathan it's obsolete and needs fixing.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:28:46 -07:00
H Hartley Sweeten
871784a5f8 staging: comedi: me4000: remove PDEBUG macro
The PDEBUG macro is used to output a bunch of debug messages in the
driver. These messages might be useful when first creating the driver
but they shouldn't be in mainline. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:26:52 -07:00
H Hartley Sweeten
ef5bbfcb29 staging: comedi: me4000: remove ISR_PDEBUG macro
The ISR_PDEBUG macro is used to output trace messages in the isr
routine. This shouldn't be in a mainline driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:26:52 -07:00
H Hartley Sweeten
d6cbe537c6 staging: comedi: me4000: remove inline port io wrappers
With the PORT_PDEBUG macro remove we can now remove the inline
port io wrappers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:26:52 -07:00
H Hartley Sweeten
3934954b4c staging: comedi: me4000: remove PORT_PDEBUG macro
The PORT_PDEBUG macro is used to output the result of every port
io operation. This shouldn't be in a mainline driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:26:51 -07:00
H Hartley Sweeten
1d489bab66 staging: comedi: me4000: remove CALL_PDEBUG macro
The CALL_PDEBUG macro is used to do function tracing in the driver.
There are better ways to do this. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:26:51 -07:00
H Hartley Sweeten
23bcbb6495 staging: comedi: pcl812: remove PCL812_EXTDEBUG define and related code
The PCL812_EXTDEBUG define enables a bunch of function tracing debug
messages as well as a dump of the comedi_cmd info during the cmdtest.
There are better ways to do the function tracing and the cmdtest
dump shouldn't be in the driver. Just remove all of it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:25:47 -07:00
H Hartley Sweeten
31a4590ee3 staging: comedi: pcl812: remove unneeded tests in pcl812_ai_cmdtest
The step 2 tests to make sure that the triggers are unique is not
needed for single source triggers. These were already trivially
validated in step 1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:25:47 -07:00
H Hartley Sweeten
f7f111c214 staging: comedi: pcl818: remove unneeded tests in ai_cmdtest
The step 2 tests of the start_src, scan_begin_src, and scan_end_src
triggers to make sure they are unique are not needed.  These triggers
all only have one source and it was trivially validated in step 1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:25:47 -07:00
H Hartley Sweeten
2b8557a734 staging: comedi: pcl816: remove unneeded tests in pcl816_ai_cmdtest
The step 2 tests of the start_src, scan_begin_src, and scan_end_src
triggers to make sure they are unique are not needed.  These triggers
all only have one source and it was trivially validated in step 1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:25:47 -07:00
H Hartley Sweeten
985eb50d55 staging: comedi: ni_atmio16d: remove the function tracing debug
These printk's are #ifdef'ed out with an undefined symbol anyway.
Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:25:47 -07:00
Sasha Levin
d7be394f7c staging: zcache: don't limit number of pools per client
Currently the amount of pools each client can use is limited to 16, this is
and arbitrary limit which isn't really required by current implementation.

This places and arbitrary limit on the number of mounted filesystems that
can use cleancache.

This patch removes that limit and uses IDR to do sparse mapping of pools
in each client.

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:24:44 -07:00
Alexandre Pereira da Silva
002176db81 misc: at25: Parse dt settings
This adds dt support to the at25 eeprom driver.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:23:04 -07:00
Camuso, Tony
98dcd59dd0 misc: hpilo: increase number of max supported channels
Increase number of supported channels from 8 to 24.
Make the number of channels configurable via module parameter max_ccb.

Signed-off-by: Mark Rusk <mark.rusk@hp.com>
Signed-off-by: Tony Camuso <tony.camuso@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:22:12 -07:00
Manohar Vanga
1bd289d1e8 vme: change maintainer e-mail address
This changes my e-mail address from my work address to my personal
one as I finish my contract with CERN at the end of June 2012. I
will continue helping with maintaining the VME driver regardless.

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:21:42 -07:00
Mark Brown
c3b15452e2 Extcon: Don't try to create duplicate link names
We can't create a link from the device to the compatibility switch class
since we already create a link from the device to to the extcon class
object and we try to use the same name for both links. This causes a loud
complaint from sysfs on boot.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:20:09 -07:00
Randy Dunlap
6e7b4a59b3 driver core: fix some kernel-doc warnings in dma*.c
Fix kernel-doc warnings in drivers/base/dma*.c:

Warning(drivers/base/dma-buf.c:498): No description found for parameter 'vaddr'
Warning(drivers/base/dma-coherent.c:199): No description found for parameter 'ret'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:15:26 -07:00
Mark Brown
be3a07f71c Extcon: Staticise extcon_class
It's not referenced outside the core file.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:15:25 -07:00
Paul Gortmaker
2584f5212d stable: update references to older 2.6 versions for 3.x
Also add information on where the respective trees are.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:14:47 -07:00
Daniel Mack
b3a3dd074f USB: fix gathering of interface associations
TEAC's UD-H01 (and probably other devices) have a gap in the interface
number allocation of their descriptors:

  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          220
    bNumInterfaces          3
    [...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      [...]
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          1 Audio
      bFunctionSubClass       0
      bFunctionProtocol      32
      iFunction               4
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      [...]

Once a configuration is selected, usb_set_configuration() walks the
known interfaces of a given configuration and calls find_iad() on
each of them to set the interface association pointer the interface
is included in.

The problem here is that the loop variable is taken for the interface
number in the comparison logic that gathers the association. Which is
fine as long as the descriptors are sane.

In the case above, however, the logic gets out of sync and the
interface association fields of all interfaces beyond the interface
number gap are wrong.

Fix this by passing the interface's bInterfaceNumber to find_iad()
instead.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: bEN <ml_all@circa.be>
Reported-by: Ivan Perrone <ivanperrone@hotmail.com>
Tested-by: ivan perrone <ivanperrone@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:13:34 -07:00
Shimoda, Yoshihiro
5897b03829 usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL
If the platform_data is not set, pdata will be uninitialized value.
Since the driver has the following code, if the condition is true when
the pdata is uninitialized value, the driver may jump to the illegal
phy_init().

	if (pdata && pdata->phy_init)
		pdata->phy_init();

This patch also fixes the following warning:

  CC      drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-sh.c: In function ‘ehci_hcd_sh_probe’:
drivers/usb/host/ehci-sh.c:104: warning: ‘pdata’ may be used uninitialized in this function

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:13:34 -07:00
Otto Meta
6c4707f3f8 usb: cdc-acm: fix devices not unthrottled on open
Currently CDC-ACM devices stay throttled when their TTY is closed while
throttled, stalling further communication attempts after the next open.

Unthrottling during open/activate got lost starting with kernel
3.0.0 and this patch reintroduces it.

Signed-off-by: Otto Meta <otto.patches@sister-shadow.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:13:33 -07:00
Dan Carpenter
7b33dc2b05 RDMA/ocrdma: Fix off by one in ocrdma_query_gid()
The dev->sgid_tbl[] array is allocated in ocrdma_alloc_resources().
It has OCRDMA_MAX_SGID elements so the test here is off by one.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-14 13:30:41 -07:00
Kautuk Consul
f28fa72914 [IA64] Port OOM changes to ia64_do_page_fault
Commit d065bd810b
(mm: retry page fault when blocking on disk transfer) and
commit 37b23e0525
(x86,mm: make pagefault killable)

The above commits introduced changes into the x86 pagefault handler
for making the page fault handler retryable as well as killable.

These changes reduce the mmap_sem hold time, which is crucial
during OOM killer invocation.

Port these changes to ia64.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-06-14 13:11:37 -07:00
Sakari Ailus
aeda3e7c65 [media] v4l: Correct create_bufs documentation
Patch id 6016af82ea ("[media] v4l2: use __u32
rather than enums in ioctl() structs") unintentionally changes the type of
the format field in struct v4l2_create_buffers from struct v4l2_format to
__u32. Revert that change.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 16:27:11 -03:00
Steven Rostedt
7374e82771 tracing: Register the ftrace internal events during early boot
All trace events including ftrace internel events (like trace_printk
and function tracing), register functions that describe how to print
their output. The events may be recorded as soon as the ring buffer
is allocated, but they are just raw binary in the buffer. The mapping
of event ids to how to print them are held within a structure that
is registered on system boot.

If a crash happens in boot up before these functions are registered
then their output (via ftrace_dump_on_oops) will be useless:

Dumping ftrace buffer:
---------------------------------
   <...>-1       0.... 319705us : Unknown type 6
---------------------------------

This can be quite frustrating for a kernel developer trying to see
what is going wrong.

There's no reason to register them so late in the boot up process.
They can be registered by early_initcall().

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-14 15:22:14 -04:00
Steven Rostedt
5da43bed80 tracing: Add comments for the other bits of ftrace_event_call.flags
TRACE_EVENT_FL_ENABLED_BIT,
	TRACE_EVENT_FL_FILTERED_BIT,
	TRACE_EVENT_FL_RECORDED_CMD_BIT,

Have comments about what they are, but:

	TRACE_EVENT_FL_CAP_ANY_BIT,
	TRACE_EVENT_FL_NO_SET_FILTER_BIT,
	TRACE_EVENT_FL_IGNORE_ENABLE_BIT,

do not, making them second class citizens. To prevent another
class warfare, these bits have protested for their right to be
commented. And By Golly! I'll give them what they want!

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-14 15:22:13 -04:00
Borislav Petkov
8d240dd88c ftrace: Remove a superfluous check
register_ftrace_function() checks ftrace_disabled and calls
__register_ftrace_function which does it again.

Drop the first check and add the unlikely hint to the second one. Also,
drop the label as John correctly notices.

No functional change.

Link: http://lkml.kernel.org/r/20120329171140.GE6409@aftab

Cc: Borislav Petkov <bp@amd64.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-14 15:22:12 -04:00
Dan Carpenter
daf67ce8cf iwlwifi: unlock on error path
We introduced a lock here in ff1ffb850b ("iwlwifi: fix dynamic
loading").  But we missed an error path which needs an unlock.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-14 14:55:14 -04:00
Stefano Stabellini
b9e0d95c04 xen: mark local pages as FOREIGN in the m2p_override
When the frontend and the backend reside on the same domain, even if we
add pages to the m2p_override, these pages will never be returned by
mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will
always fail, so the pfn of the frontend will be returned instead
(resulting in a deadlock because the frontend pages are already locked).

INFO: task qemu-system-i38:1085 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
qemu-system-i38 D ffff8800cfc137c0     0  1085      1 0x00000000
 ffff8800c47ed898 0000000000000282 ffff8800be4596b0 00000000000137c0
 ffff8800c47edfd8 ffff8800c47ec010 00000000000137c0 00000000000137c0
 ffff8800c47edfd8 00000000000137c0 ffffffff82213020 ffff8800be4596b0
Call Trace:
 [<ffffffff81101ee0>] ? __lock_page+0x70/0x70
 [<ffffffff81a0fdd9>] schedule+0x29/0x70
 [<ffffffff81a0fe80>] io_schedule+0x60/0x80
 [<ffffffff81101eee>] sleep_on_page+0xe/0x20
 [<ffffffff81a0e1ca>] __wait_on_bit_lock+0x5a/0xc0
 [<ffffffff81101ed7>] __lock_page+0x67/0x70
 [<ffffffff8106f750>] ? autoremove_wake_function+0x40/0x40
 [<ffffffff811867e6>] ? bio_add_page+0x36/0x40
 [<ffffffff8110b692>] set_page_dirty_lock+0x52/0x60
 [<ffffffff81186021>] bio_set_pages_dirty+0x51/0x70
 [<ffffffff8118c6b4>] do_blockdev_direct_IO+0xb24/0xeb0
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff8118ca95>] __blockdev_direct_IO+0x55/0x60
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff811e91c8>] ext3_direct_IO+0xf8/0x390
 [<ffffffff811e71a0>] ? ext3_get_blocks_handle+0xe00/0xe00
 [<ffffffff81004b60>] ? xen_mc_flush+0xb0/0x1b0
 [<ffffffff81104027>] generic_file_aio_read+0x737/0x780
 [<ffffffff813bedeb>] ? gnttab_map_refs+0x15b/0x1e0
 [<ffffffff811038f0>] ? find_get_pages+0x150/0x150
 [<ffffffff8119736c>] aio_rw_vect_retry+0x7c/0x1d0
 [<ffffffff811972f0>] ? lookup_ioctx+0x90/0x90
 [<ffffffff81198856>] aio_run_iocb+0x66/0x1a0
 [<ffffffff811998b8>] do_io_submit+0x708/0xb90
 [<ffffffff81199d50>] sys_io_submit+0x10/0x20
 [<ffffffff81a18d69>] system_call_fastpath+0x16/0x1b

The explanation is in the comment within the code:

We need to do this because the pages shared by the frontend
(xen-blkfront) can be already locked (lock_page, called by
do_read_cache_page); when the userspace backend tries to use them
with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
do_blockdev_direct_IO is going to try to lock the same pages
again resulting in a deadlock.

A simplified call graph looks like this:

pygrub                          QEMU
-----------------------------------------------
do_read_cache_page              io_submit
  |                              |
lock_page                       ext3_direct_IO
                                 |
                                bio_add_page
                                 |
                                lock_page

Internally the xen-blkback uses m2p_add_override to swizzle (temporarily)
a 'struct page' to have a different MFN (so that it can point to another
guest). It also can easily find out whether another pfn corresponding
to the mfn exists in the m2p, and can set the FOREIGN bit
in the p2m, making sure that mfn_to_pfn returns the pfn of the backend.

This allows the backend to perform direct_IO on these pages, but as a
side effect prevents the frontend from using get_user_pages_fast on
them while they are being shared with the backend.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-06-14 14:03:41 -04:00
J. Bruce Fields
bc2df47a40 nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels
Most frequent symptom was a BUG triggering in expire_client, with the
server locking up shortly thereafter.

Introduced by 508dc6e110 "nfsd41:
free_session/free_client must be called under the client_lock".

Cc: stable@kernel.org
Cc: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-14 13:54:08 -04:00
Stanislav Kinsbursky
12918b10d5 NFS: hard-code init_net for NFS callback transports
In case of destroying mount namespace on child reaper exit, nsproxy is zeroed
to the point already. So, dereferencing of it is invalid.
This patch hard-code "init_net" for all network namespace references for NFS
callback services. This will be fixed with proper NFS callback
containerization.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-14 13:53:43 -04:00
Chen Baozi
51c84223af xfs: fix typo in comment of xfs_dinode_t.
There should be "XFS_DFORK_DPTR, XFS_DFORK_APTR, and XFS_DFORK_PTR" instead
of "XFS_DFORK_PTR, XFS_DFORK_DPTR, and XFS_DFORK_PTR".

Signed-off-by: Chen Baozi <baozich@gmail.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:26 -05:00
Dave Chinner
5276432997 xfs: kill copy and paste segment checks in xfs_file_aio_read
The generic segment check code now returns a count of the number of
bytes in the iovec, so we don't need to roll our own anymore.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:25 -05:00
Dave Chinner
32972383ca xfs: make largest supported offset less shouty
XFS_MAXIOFFSET() is just a simple macro that resolves to
mp->m_maxioffset. It doesn't need to exist, and it just makes the
code unnecessarily loud and shouty.

Make it quiet and easy to read.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:24 -05:00
Dave Chinner
d2c2819117 xfs: m_maxioffset is redundant
The m_maxioffset field in the struct xfs_mount contains the same
value as the superblock s_maxbytes field. There is no need to carry
two copies of this limit around, so use the VFS superblock version.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:22 -05:00
Jeff Liu
0f2cf9d3d9 xfs: fix debug_object WARN at xfs_alloc_vextent()
Fengguang reports:

[  780.529603] XFS (vdd): Ending clean mount
[  781.454590] ODEBUG: object is on stack, but not annotated
[  781.455433] ------------[ cut here ]------------
[  781.455433] WARNING: at /c/kernel-tests/sound/lib/debugobjects.c:301 __debug_object_init+0x173/0x1f1()
[  781.455433] Hardware name: Bochs
[  781.455433] Modules linked in:
[  781.455433] Pid: 26910, comm: kworker/0:2 Not tainted 3.4.0+ #51
[  781.455433] Call Trace:
[  781.455433]  [<ffffffff8106bc84>] warn_slowpath_common+0x83/0x9b
[  781.455433]  [<ffffffff8106bcb6>] warn_slowpath_null+0x1a/0x1c
[  781.455433]  [<ffffffff814919a5>] __debug_object_init+0x173/0x1f1
[  781.455433]  [<ffffffff81491c65>] debug_object_init+0x14/0x16
[  781.455433]  [<ffffffff8108842a>] __init_work+0x20/0x22
[  781.455433]  [<ffffffff8134ea56>] xfs_alloc_vextent+0x6c/0xd5

Use INIT_WORK_ONSTACK in xfs_alloc_vextent instead of INIT_WORK.

Reported-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:21 -05:00
Alain Renaud
7d0fa3ecba xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)
On filesytems with a block size smaller than PAGE_SIZE we currently have
a problem with unwritten extents.  If a we have multi-block page for
which an unwritten extent has been allocated, and only some of the
buffers have been written to, and they are not contiguous, we can expose
stale data from disk in the blocks between the writes after extent
conversion.

Example of a page with unwritten and real data.
buffer  content
0       empty  b_state = 0
1       DATA   b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten
2       DATA   b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten
3       empty  b_state = 0
4       empty  b_state = 0
5       DATA   b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten
6       DATA   b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten
7       empty  b_state = 0

Buffers 1, 2, 5, and 6 have been written to, leaving 0, 3, 4, and 7
empty.  Currently buffers 1, 2, 5, and 6 are added to a single ioend,
and when IO has completed, extent conversion creates a real extent from
block 1 through block 6, leaving 0 and 7 unwritten.  However buffers 3
and 4 were not written to disk, so stale data is exposed from those
blocks on a subsequent read.

Fix this by setting iomap_valid = 0 when we find a buffer that is not
Uptodate.  This ensures that buffers 5 and 6 are not added to the same
ioend as buffers 1 and 2.  Later these blocks will be converted into two
separate real extents, leaving the blocks in between unwritten.

Signed-off-by: Alain Renaud <arenaud@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:20 -05:00
Jan Schmidt
3310c36eef Btrfs: fix race in tree mod log addition
When adding to the tree modification log, we grab two locks at different
stages. We must not drop the outer lock until we're done with section
protected by the inner lock. This moves the unlock call for the outer lock
to the appropriate position.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-06-14 18:52:39 +02:00
Jan Schmidt
3d7806eca4 Btrfs: add btrfs_next_old_leaf
To make sense of the tree mod log, the backref walker not only needs
btrfs_search_old_slot, but it also called btrfs_next_leaf, which in turn was
calling btrfs_search_slot. This obviously didn't give the correct result.

This commit adds btrfs_next_old_leaf, a drop-in replacement for
btrfs_next_leaf with a time_seq parameter. If it is zero, it behaves exactly
like btrfs_next_leaf. If it is non-zero, it will use btrfs_search_old_slot
with this time_seq parameter.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-06-14 18:52:09 +02:00
Jan Schmidt
a95236d99f Btrfs: fix return value for __tree_mod_log_oldest_root
In __tree_mod_log_oldest_root() we must return the found operation even if
it's not a ROOT_REPLACE operation. Otherwise, the caller assumes that there
are no operations to be rewinded and returns immediately.

The code in the caller is modified to improve readability.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-06-14 18:44:22 +02:00
Jan Schmidt
8ba97a15e7 Btrfs: use btrfs_read_lock_root_node in get_old_root
get_old_root could race with root node updates because we weren't locking
the node early enough. Use btrfs_read_lock_root_node to grab the root locked
in the very beginning and release the lock as soon as possible (just like
btrfs_search_slot does).

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-06-14 18:44:21 +02:00
Jan Schmidt
f617e2fd52 Btrfs: remove obsolete btrfs_next_leaf call from __resolve_indirect_ref
When resolving indirect refs, we used to call btrfs_next_leaf in case we
didn't find an exact match. While we should find exact matches most of the
time, in case we don't, we must continue searching. Treating those matches
differently depending on the level we're searching doesn't make sense.

Even worse, we might end up searching for a key larger than the largest, in
which case there is no next_leaf and subsequent jobs would fail. This commit
drops the bogous lines.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-06-14 18:44:20 +02:00
Ben Widawsky
8e96d9c4d9 drm/i915: reset the GPU on context fini
It's the only way we know how to make the GPU actually forget about the
default context.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:21 +02:00
Ben Widawsky
6e0a69dbc8 drm/i915/context: switch contexts with execbuf2
Use the rsvd1 field in execbuf2 to specify the context ID associated
with the workload. This will allow the driver to do the proper context
switch when/if needed.

v2: Add checks for context switches on rings not supporting contexts.
Before the code would silently ignore such requests.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:21 +02:00
Ben Widawsky
846248136d drm/i915/context: create & destroy ioctls
Add the interfaces to allow user space to create and destroy contexts.
Contexts are destroyed automatically if the file descriptor for the dri
device is closed.

Following convention as usual here causes checkpatch warnings.

v2: with is_initialized, no longer need to init at create
drop the context switch on create (daniel)

v3: Use interruptible lock (Chris)
return -ENODEV in !GEM case (Chris)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:20 +02:00
Ben Widawsky
f2ef6eb145 drm/i915: switch to default context on idle
To keep things as sane as possible, switch to the default context before
idling. This should help free context objects, as well as put things in
a more well defined state before suspending.

v2: remove seqno from context switch call (daniel)
return error on failed context switch instead of WARN+continue (daniel)

v3: move idling to i915_gpu idle (from i915_gem_idle) (Chris)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:20 +02:00
Ben Widawsky
b9a3906b60 drm/i915: add ccid to error state
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:19 +02:00
Ben Widawsky
dfabbcb4f6 drm/i915: use the default context
With the code to do HW context switches in place have the driver load the
default context for the render ring when the driver loads.

The default context will be an ever present context that is available to
switch to at any time for the given ring.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-14 17:36:19 +02:00