Commit graph

323,142 commits

Author SHA1 Message Date
Shawn Guo
ffc505c0b9 ARM: dts: imx53-qsb: enable audio support
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:24 +08:00
Shawn Guo
a15d9f8986 ARM: dts: imx51-babbage: enable audio support
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:23 +08:00
Shawn Guo
394025ef42 ARM: imx: add audio codec clk lookup for imx53-qsb
On imx53-qsb board, the clk ssi_ext.0 is used as the clock input
to audio codec sgtl5000.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:21 +08:00
Shawn Guo
bf22e530d5 ARM: imx: add audmux pad setting for imx51-babbage
Before i.MX51 Pinctrl support is available, we have to reply on
the iomux initialization in non-DT board file to set iomux up for
DT boot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:19 +08:00
Shawn Guo
13b3a07a26 ARM: imx: add more imx5 ssi clocks
Add more imx5 ssi clocks and lookup for device tree probe.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:17 +08:00
Bob Peterson
f2f9c81244 GFS2: Eliminate unused "new" parameter to gfs2_meta_indirect_buffer
It turns out that the "new" parameter to function gfs2_meta_indirect_buffer
was always being passed in as zero. Therefore, this patch eliminates it
and simplifies the function.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-05-11 10:19:23 +01:00
Michel JAOUEN
7ccfe9b1d5 mfd: Support of hierachical interrupt for ab8500
Hierarchical interrupt is supported since ab8500 V2.
However, it is not implemented in the ab8500-core driver.
With the current implementation, when an ab9540 interrupt
occurs, 17 Latch registers are read through i2c. With
hierarchical interrupt implementation, there are only 4 i2c
accesses.

Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com>
Reviewed-by: Michel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-11 11:16:27 +02:00
Linus Walleij
08d98fe0e8 ARM: ux500: switch MSP to using pinctrl for pins
The MSP platform data callbacks use the old custom callbacks to
set the state of the pins, switch over to using pinctrl.

Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:19 +02:00
Linus Walleij
09486cbb26 ARM: ux500: alter MSP registration to return a device pointer
Alter the db8500_add_msp_i2s() calls to return a struct
platform_device * pointer, not an integer. We nee the pointer
to obtain a pinctrl handle.

Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:19 +02:00
Linus Walleij
a09806607f ARM: ux500: switch to using pinctrl for uart0
UART0 had a hack that enabled its pins on init and put it to
sleep on the exit callback. Replace this with the pinctrl calls
to do the same thing and update the runtime table with the two
apropriate states for runtime/active and idle.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:18 +02:00
Linus Walleij
3b64c09b37 ARM: ux500: delete custom pin control system
At the beginning of the first patch series I included the custom
ux500 pin control system to make sure I could eventually replace
it with the standard subsystem driver. So now that we've done so,
let's remove it.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:18 +02:00
Linus Walleij
ed781d395f ARM: ux500: switch over to Nomadik pinctrl driver
This converts the Ux500 family to use the pinctrl driver for
configuring pins.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:17 +02:00
Linus Walleij
65697e6b1a pinctrl: add sleep state definition
There is an IDLE definition in the pinctrl framework, but for
ux500 SLEEP is more apropriate.

I've added some comments on the semantics of the common states
so as to avoid misunderstandings.

ChangeLog v1->v2:
- Fixed terminology "on"->"into".

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:17 +02:00
Linus Walleij
d41af62763 pinctrl/nomadik: implement pin configuration
This implements the pin configuration interface for the
Nomadik pin controller.

As part of the exercise we add a bit in the pin_cfg_t for
the Nomadik pinctrl driver that indicates if the pin should
be forced into GPIO mode. This is not done to go behind the
back of the GPIO subsystem, but to ensure that default modes
can be set by hogs on boot and system suspend/resume states.
It was used implicitly by the old code defining all config
settings and modes in a single config word but we now have
a split between pinmux and pinconf leading to the need to
have this.

We also add a bit for explicitly setting sleepmode of the
pin. This was previously handled by custom calls with the
_sleep() suffix, but we now have one single interface into
the configuration so we replace this with a bit indicating
that the pin shall be configured into sleep mode.

Some of the configuration can be refactored later to use
less custom fields on the pin_cfg_t but we are currently
leaving the old function calls in place so we stay
compatible.

ChangeLog v1->v2:
- Drop a hunk changing pinmuxing for GPIO and move it
  over to the preceding pinmux patch.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:16 +02:00
Linus Walleij
dbfe8ca259 pinctrl/nomadik: implement pin multiplexing
Implements basic pinmux for the Nomadik pin controller.

The plan is to split the existing singular pin config interface
nmk_config_pin(), nmk_config_pins(), that will configure muxing
and other settings at the same time, into two interfaces
by splitting the code in pinmux and pinctrl and eventually
deleting the old interface and its helper functions when all
users are gone.

nmk_gpio_set_mode() and nmk_gpio_get_mode() are two older
interfaces for just configuring muxing/altfunctions that
will also be replaced in the end.

We take some extra care to handle the glitch-avoidance here,
but it is simpler now since there is only one altsetting per
pingroup so we know immediately if we need to avoid altfunc
C glitches for a certain group.

As part of the makeover implement the .request() and .free()
calls on the GPIO chips and have them call back into the
pinctrl layer to reserve GPIOs.

ChangeLog v1->v2:
- Rebased on pinctrl-mergebase-20120418 so we get the latest
  driver infrastructure where function count is done by a fixed
  value and we can drop a few range checks since this is now
  handled by the core.
- Include a GPIO muxing hunk erroneously part of the pin config
  patch.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:16 +02:00
Linus Walleij
24cbdd75c4 pinctrl/nomadik: reuse GPIO debug function for pins
Since all pins we can control are GPIOs, match a GPIO range to
each pin in the debug function and call into the GPIO debug
print function to have the per-pin information.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:15 +02:00
Linus Walleij
6f4350a6da pinctrl/nomadik: break out single GPIO debug function
Break out the code displaying the status of a single pin so we
can use the same code in the pinctrl debug function.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:15 +02:00
Linus Walleij
e98ea774c8 pinctrl/nomadik: basic Nomadik pinctrl interface
This adds a scratch pin control interface to the Nomadik pinctrl
driver, and defines the pins and groups in the DB8500 ASIC. We
define GPIO ranges to cover the pins exposed. The DB8500 has
more pins than this but we restrict the driver to the pins that
can be controlled from the combined GPIO and pin control hardware
to begin with.

ChangeLog v1->v2:
- Base on the latest pinctrl development from
  pinctrl-mergebase-20120418 so we can get rid of legacy
  group count mechanism. Also drop the range checks for group
  index, this is handled by the core now.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 11:14:14 +02:00
Jouni Malinen
8ab5415d6c ath6kl: Use correct max-scan-SSIDs limit
The currently used firmware images support 16 SSIDs in the scan
request (indexes 0..15), so update the host driver to use the same
limit to allow some more SSIDs to be scanned per request. In addition,
change the max-index to max-SSIDs to make it easier to understand the
implementation and fix couple of off-by-one checks that could limit
the maximum number of entries too strictly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-11 11:51:08 +03:00
Arnd Bergmann
072e82a18f pinctrl/nomadik: !CONFIG_OF build error
a60b57e "drivers/gpio: gpio-nomadik: Add support for irqdomains" broke
building with CONFIG_OF_GPIO disabled.

Without this patch, building nhk8815_defconfig results in:

/home/arnd/linux-arm/drivers/gpio/gpio-nomadik.c: In function 'nmk_gpio_probe':
/home/arnd/linux-arm/drivers/gpio/gpio-nomadik.c:1238:6: error: 'struct gpio_chip' has no member named 'of_node'
make[3]: *** [drivers/gpio/gpio-nomadik.o] Error 1
make[2]: *** [drivers/gpio] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [drivers] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 10:33:59 +02:00
Linus Walleij
1ae4e59279 gpio: move the Nomadik GPIO driver to pinctrl
I'm moving this driver over to the pinctrl subsystem to convert
the custom pin mux/config scheme over to use pinctrl.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11 10:33:43 +02:00
Richard Zhao
2ccaef0520 dma: imx-sdma: make channel0 operations atomic
device_prep_dma_cyclic may be call in audio trigger function which is
atomic context, so we make it atomic too.

 - change channel0 lock to spinlock.
 - Use polling to wait for channel0 finish running.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11 14:00:38 +05:30
Marek Lindner
0b0094e000 batman-adv: replace HZ calculations with jiffies_to_msecs()
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:13 +02:00
Marek Lindner
d7b2a97e03 batman-adv: rename last_valid to last_seen
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:12 +02:00
Marek Lindner
c3e29312c8 batman-adv: register batman ogm receive function during protocol init
The B.A.T.M.A.N. IV OGM receive function still was hard-coded although
it is a routing protocol specific function. This patch takes advantage
of the dynamic packet handler registration to remove the hard-coded
function calls.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:11 +02:00
Marek Lindner
ffa995e036 batman-adv: introduce packet type handler array for incoming packets
The packet handler array replaces the growing switch statement, thus
dealing with incoming packets in a more efficient way. It also adds
to possibility to register packet handlers on the fly.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:10 +02:00
Marek Lindner
75cd33f863 batman-adv: introduce is_single_hop_neigh variable to increase readability
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:09 +02:00
Antonio Quartulli
9205cc521e batman-adv: fix wrong dhcp option list browsing
In is_type_dhcprequest(), while parsing a DHCP message, if the entry we found in
the option list is neither a padding nor the dhcp-type, we have to ignore it and
jump as many bytes as its length + 1. The "+ 1" byte is given by the subtype
field itself that has to be jumped too.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:08 +02:00
Olof Johansson
80b9abf973 Merge branch 'clean/late_initcall_v2' of git://git.linaro.org/people/shawnguo/linux-2.6 into staging/cleanup
By Shawn Guo
via Shawn Guo
* 'clean/late_initcall_v2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: ux500: use machine specific hook for late init
  ARM: tegra: use machine specific hook for late init
  ARM: shmobile: use machine specific hook for late init
  ARM: sa1100: use machine specific hook for late init
  ARM: s3c64xx: use machine specific hook for late init
  ARM: prima2: use machine specific hook for late init
  ARM: pnx4008: use machine specific hook for late init
  ARM: omap2: use machine specific hook for late init
  ARM: omap1: use machine specific hook for late init
  ARM: msm: use machine specific hook for late init
  ARM: imx: use machine specific hook for late init
  ARM: exynos: use machine specific hook for late init
  ARM: ep93xx: use machine specific hook for late init
  ARM: davinci: use machine specific hook for late init
  ARM: provide a late_initcall hook for platform initialization
2012-05-11 00:49:56 -07:00
Ying-Chun Liu (PaulLiu)
41a0d3aa50 ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
Add Dialog DA9053 regulators support for imx53-qsb (Loco board)

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:09 +08:00
Richard Zhao
c3001b2a63 ARM: dts: imx6q-sabrelite: add serial2 pinctrl support
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:08 +08:00
Richard Zhao
b7879fe6da ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:07 +08:00
Richard Zhao
a258561df1 ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:06 +08:00
Richard Zhao
0987b598ea ARM: imx6q: add ssi1_ipg clk_lookup
It's used by audio drivers.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:04 +08:00
Richard Zhao
5ca65c1883 ARM: dts: imx6q-sabrelite: add audmux pinctrl support
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:03 +08:00
Richard Zhao
d99a79fcf4 ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:02 +08:00
Richard Zhao
f965cd55e2 ARM: dts: imx6q-sabrelite: add audmux device
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:01 +08:00
Richard Zhao
b1a5da8eb3 ARM: dts: imx6q-sabrelite: add ssi device
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:00 +08:00
Dong Aisheng
551fd208f2 ARM: dts: imx6q-arm2: add pinctrl state for usdhc
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:58 +08:00
Dirk Behme
785d7fab3e ARM: imx6: Add UART2 for low-level debug
To be able to enable early debugging on boards using the UART2 for the
console, add the option for early debugging on UART2.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:57 +08:00
Shawn Guo
ef44180680 ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled
It fixes the following compile error with network disabled in
imx_v6_v7_defconfig.

arch/arm/mach-imx/built-in.o: In function `ksz9021rn_phy_fixup':
imx53-dt.c:(.text+0x5f70): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5f84): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5f98): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5fac): undefined reference to `mdiobus_write'
imx53-dt.c:(.text+0x5fc0): undefined reference to `mdiobus_write'
arch/arm/mach-imx/built-in.o: In function `imx6q_init_machine':
imx53-dt.c:(.init.text+0x387c): undefined reference to `phy_register_fixup_for_uid'
make: *** [.tmp_vmlinux1] Error 1

Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:56 +08:00
Richard Zhao
071dea508f ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function
It'll be easier to add other board specific code.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:55 +08:00
Fabio Estevam
f07439c432 ARM: dts: imx6q-sabrelite: Add SPI NOR support
mx6qsabrelite has a sst25vf016b SPI NOR flash connected to eCSPI1.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:54 +08:00
Fabio Estevam
691d264087 ARM: dts: Add basic support for imx6q-sabresd
Add basic support for imx6q-sabresd.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:17:52 +08:00
Fabio Estevam
4e692101ab ARM: imx6q-arm2: Remove hardcoded mac address
Do not hardcode the local mac address.

Let bootloader retrieve it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:08:30 +08:00
Shawn Guo
0c456cfa7e ARM: imx: rename uart and fec device tree nodes
It has been pointed out by device tree maintainer for several times
that the generic names 'serial' and 'ethernet' should be used for
those devices per ePAPR.  Renames imx uart and fec device tree nodes
to stop them being bad examples.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-11 15:08:24 +08:00
Fabio Estevam
4592a96591 ARM: dts: imx: Remove bootargs field
Remove bootargs field as this information is retrieved from the bootloader.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:08:19 +08:00
Ying-Chun Liu (PaulLiu)
a1e327e683 ARM: dts: imx6q: add anatop regulators
Add anatop regulators to imx6q.dtsi for all imx6q platforms.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:08:13 +08:00
Linus Walleij
b9e3b72d4a Merge tag 'pinctrl-mergebase-20120418' into HEAD
Conflicts:
	drivers/pinctrl/core.c
2012-05-11 09:04:22 +02:00
Shawn Guo
fed78ce4c6 tty: serial: imx: adopt pinctrl support
Cc: linux-serial@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-05-11 15:01:57 +08:00