Do a bit of reformatting on the Unevictable-LRU documentation.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Point the UNEVICTABLE_LRU config option at the documentation describing
the option.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit ddb53d48da ("fbdev: remove cyblafb
driver") removed drivers/video/cyblafb.c, but not its .h file
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the introduction of resource counters hierarchies
(28dbc4b6a0) the prototypes of
res_counter_init() and res_counter_charge() have been changed.
Keep the documentation consistent with the actual function prototypes.
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "simplify spi_write_then_read()" patch included two regressions from
the 2.6.27 behaviors:
- The data it wrote out during the (full duplex) read side
of the transfer was not zeroed.
- It fails completely on half duplex hardware, such as
Microwire and most "3-wire" SPI variants.
So, revert that patch. A revised version should be submitted at some
point, which can get the speedup on standard hardware (full duplex)
without breaking on less-capable half-duplex stuff.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.28.x, 2.6.29.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: (nearly) trivial
The patch
commit da654b74bd
Author: Srinivasa Ds <srinivasa@in.ibm.com>
Date: Tue Sep 23 15:23:52 2008 +0530
signals: demultiplexing SIGTRAP signal
forgot to update the NSIGTRAP define in asm-generic/siginfo.h to the new
number of sigtrap subcodes. Nothing in the tree seems to use it, but
presumably something in user space might. So update it.
Cc: Srinivasa Ds <srinivasa@in.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not allow modes with unsupported pixel depth. Otherwise, one can hang
a computer by setting incorrect value with fbset command.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix filemap.c kernel-doc warnings:
Warning(mm/filemap.c:575): No description found for parameter 'page'
Warning(mm/filemap.c:575): No description found for parameter 'waiter'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Include <linux/types.h> in fiemap.h. Sam Ravnborg pointed out that this
was missing in this newly-exported header which uses the __u32 and __u64
types.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sisfb incorrectly sets the length of the color fields to 6 bits
for PSEUDOCOLOR modes, even though 8 bits are always used per pixel.
Fix this by setting the length to 8.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sa1100fb incorrectly sets the length of the color fields to 8 bits for
PSEUDOCOLOR modes for which only 4 bits are used per pixel. Fix this by
setting the length to 4 bits for these modes.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
s3fb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 or 4 bits are used per pixel. Fix this
by setting the length to 8 or 4, respectively.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| ipc/mq_sysctl.c:26: warning: 'get_mq' defined but not used
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When an HFS filesystem is unmounted, it leaks a 2-page bitmap. Also,
under extreme memory pressure, it's possible that hfs_releasepage() may
use a tree pointer that has not been initialized, and if so, the release
request should just be rejected.
[akpm@linux-foundation.org: free_pages(0) is legal, remove obvious comment]
Signed-off-by: Dave Anderson <anderson@redhat.com>
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Data sheet at:
http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
These sensors communicate over a 2 wire bus running a device specific
protocol. The complexity of the driver is mainly due to handling the
substantial delays between requesting a reading and the device pulling the
data line low to indicate that the data is available. This is handled by
an interrupt that is disabled under all other conditions.
I wasn't terribly clear on the best way to handle this, so comments on
that aspect would be particularly welcome!
Interpretation of the temperature depends on knowing the supply voltage.
If configured in a board config as a regulator consumer this is obtained
from the regulator subsystem. If not it should be provided in the
platform data.
I've placed this driver in the hwmon subsystem as it is definitely a
device that may be used for hardware monitoring and with it's relatively
slow response times (up to 120 millisecs to get a reading) a caching
strategy certainly seems to make sense!
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
efifb will attempt to ioremap a framebuffer even if its starting address
is 0, failing and causing an ugly backtrace in the process. Exit before
probing if this is the case.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
uvesafb incorrectly sets the length of the color fields to 6 bits for
PSEUDOCOLOR modes, even though 8 bits are always used per pixel. Fix this
by setting the length to 8.
The switch of the DAC width from the default 6 bits to 8 bits is retained
and tracked internally in the driver, but never exposed to userspace.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <syrjala@sci.fi>
Cc: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation about the meaning of the color component bitfield
lengths in pseudocolor modes is inconsistent. Fix it, so that it
indicates the correct interpretation everywhere, i.e. that 1 << length is
the number of palette entries.
Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <syrjala@sci.fi>
Acked-by: Geert Uytterhoeven <geert.uytterhoeven@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fb_notifier_call_chain() is called with info->lock held, i.e. in
do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some
notifier callbacks, like fbcon_event_notify(), try to re-acquire
info->lock again.
Remove the lock/unlock_fb_info() in all the framebuffer notifier
callbacks' and be sure to always call fb_notifier_call_chain() with
info->lock held.
Reported-by: Pavel Roskin <proski@gnu.org>
Reported-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init/initramfs.c:520: warning: 'clean_rootfs' defined but not used
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since Denis is no longer working for Option, I will maintain the driver from
now on.
Signed-off-by: Jan Dumon <j.dumon@option.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vm knobs should go in the vm table. Probably too late for
randomize_va_space though.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch allows event filters to be safely removed or switched
on-the-fly while avoiding the use of rcu or the suspension of tracing of
previous versions.
It does it by adding a new filter_pred_none() predicate function which
does nothing and by never deallocating either the predicates or any of
the filter_pred members used in matching; the predicate lists are
allocated and initialized during ftrace_event_calls initialization.
Whenever a filter is removed or replaced, the filter_pred_* functions
currently in use by the affected ftrace_event_call are immediately
switched over to to the filter_pred_none() function, while the rest of
the filter_pred members are left intact, allowing any currently
executing filter_pred_* functions to finish up, using the values they're
currently using.
In the case of filter replacement, the new predicate values are copied
into the old predicates after the above step, and the filter_pred_none()
functions are replaced by the filter_pred_* functions for the new
filter. In this case, it is possible though very unlikely that a
previous filter_pred_* is still running even after the
filter_pred_none() switch and the switch to the new filter_pred_*. In
that case, however, because nothing has been deallocated in the
filter_pred, the worst that can happen is that the old filter_pred_*
function sees the new values and as a result produces either a false
positive or a false negative, depending on the values it finds.
So one downside to this method is that rarely, it can produce a bad
match during the filter switch, but it should be possible to live with
that, IMHO.
The other downside is that at least in this patch the predicate lists
are always pre-allocated, taking up memory from the start. They could
probably be allocated on first-use, and de-allocated when tracing is
completely stopped - if this patch makes sense, I could create another
one to do that later on.
Oh, and it also places a restriction on the size of __arrays in events,
currently set to 128, since they can't be larger than the now embedded
str_val arrays in the filter_pred struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239610670.6660.49.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes filter_check_discard() to make use of the new
ring_buffer_discard_commit() function and modifies the current users to
call the old commit function in the non-discard case.
It also introduces a version of filter_check_discard() that uses the
global trace buffer (filter_current_check_discard()) for those cases.
v2 changes:
- fix compile error noticed by Ingo Molnar
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178554.10295.36.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new config option, CONFIG_EVENT_TRACING that gets selected
when CONFIG_TRACING is selected and adds everything needed by the stuff
in trace_export - basically all the event tracing support needed by e.g.
bprint, minus the actual events, which are only included if
CONFIG_EVENT_TRACER is selected.
So CONFIG_EVENT_TRACER can be used to turn on or off the generated events
(what I think of as the 'event tracer'), while CONFIG_EVENT_TRACING turns
on or off the base event tracing support used by both the event tracer and
the other things such as bprint that can't be configured out.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178441.10295.34.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring_buffer_discard_commit makes better usage of the ring_buffer
when an event has been discarded. It tries to remove it completely if
possible.
This patch converts the trace event filtering to use
ring_buffer_discard_commit instead of the ring_buffer_event_discard.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring_buffer_discard_commit is similar to ring_buffer_event_discard
but it can only be done on an event that has yet to be commited.
Unpredictable results can happen otherwise.
The main difference between ring_buffer_discard_commit and
ring_buffer_event_discard is that ring_buffer_discard_commit will try
to free the data in the ring buffer if nothing has addded data
after the reserved event. If something did, then it acts almost the
same as ring_buffer_event_discard followed by a
ring_buffer_unlock_commit.
Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit
can be called on an event, not both.
This commit also exports both discard functions to be usable by
GPL modules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker suggested that the trace_special event shouldn't be
filterable; this patch adds a TRACE_EVENT_FORMAT_NOFILTER event macro
that allows an event format to be exported without having a filter
attached, and removes filtering from the trace_special event.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds run-time field descriptions to all the event formats
exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers
that use them (i.e. the tracers in the 'ftrace subsystem') so they can
also have their output filtered by the event-filtering mechanism.
When I was testing this, there were a couple of things that fooled me
into thinking the filters weren't working, when actually they were -
I'll mention them here so others don't make the same mistakes (and file
bug reports. ;-)
One is that some of the tracers trace multiple events e.g. the
sched_switch tracer uses the context_switch and wakeup events, and if
you don't set filters on all of the traced events, the unfiltered output
from the events without filters on them can make it look like the
filtering as a whole isn't working properly, when actually it is doing
what it was asked to do - it just wasn't asked to do the right thing.
The other is that for the really high-volume tracers e.g. the function
tracer, the volume of filtered events can be so high that it pushes the
unfiltered events out of the ring buffer before they can be read so e.g.
cat'ing the trace file repeatedly shows either no output, or once in
awhile some output but that isn't there the next time you read the
trace, which isn't what you normally expect when reading the trace file.
If you read from the trace_pipe file though, you can catch them before
they disappear.
Changes from v1:
As suggested by Frederic Weisbecker:
- get rid of externs in functions
- added unlikely() to filter_check_discard()
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add did_interrupt() function to check if a PHY port
really caused an interrupt. This is needed in the case
of shared PHY interrupt pin configuration to stop
interrupt event processing for PHY ports which didn't
cause an interrupt.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marvell 88E1121R Dual PHY device can be hardware-configured
to use shared interrupt pin for both PHY ports. For such
PHY configurations using shared PHY interrupt phy_interrupt()
handler will also schedule a work for PHY port which didn't
cause an interrupt.
This patch adds a possibility for PHY drivers to provide
did_interrupt() function which reports if the PHY (or a PHY
port in a multi-PHY device) generated an interrupt. This
function is called in phy_change() as phy_change() shouldn't
proceed if it is invoked for a PHY which didn't cause an
interrupt. So check for interrupt originator in phy_change()
to allow early-out.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the Marvell M88E1121R Dual GigE PHY
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before patch:
# tracer: power
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
[ 676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463
[ 676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532
...
After patch:
# tracer: power
#
# TIMESTAMP STATE EVENT
# | | |
[ 676.875865889] CSTATE: Going to C1 on cpu 0 for 0.005911463
[ 676.882938805] CSTATE: Going to C1 on cpu 0 for 0.104796532
...
v2: Use seq_puts instead of seq_printf
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49E2E889.5000903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: remove xfs_flush_space
xfs: flush delayed allcoation blocks on ENOSPC in create
xfs: block callers of xfs_flush_inodes() correctly
xfs: make inode flush at ENOSPC synchronous
xfs: use xfs_sync_inodes() for device flushing
xfs: inform the xfsaild of the push target before sleeping
xfs: prevent unwritten extent conversion from blocking I/O completion
xfs: fix double free of inode
xfs: validate log feature fields correctly
We noticed on parisc that our broadcoms all swapped MAC addresses going
from 2.6.29 to 2.6.30-rc1:
Apr 11 07:48:24 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4b:15:59
Apr 13 07:34:34 ion kernel: eth0: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:00:59:15:4b:6e
The problem patch is:
commit 6d348f2c1e
Author: Matt Carlson <mcarlson@broadcom.com>
Date: Wed Feb 25 14:25:52 2009 +0000
tg3: Eliminate tg3_nvram_read_swab()
With the root cause being the use of memcpy to set the mac address:
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
This might work on little endian machines, but it can't on big endian
ones. You have to use the original setting mechanism to be correct on
all architectures.
The attached patch fixes parisc.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch "introduce imcr_ helpers" introduced good comments, but
also a few new compile warnings. This fixes the function definitions
to have a 'void' return type.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090413153924.GA20287@mailshack.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It seems that the zero value from the PICB (position in current buffer)
register is not reliable. Use jiffies to correct returned value
from the ring buffer pointer callback.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- use monotonic posix clock to measure time
- try to avoid reading zero from PICB (position in current buffer) register
- show also measured samples
- when clock is near 41000 or 44100, use exactly these values
(they appears to be reference clocks for hardware manufacturers)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
docbook: make cleandocs
kbuild: fix spurious initramfs rebuild
Documentation: explain the difference between __bitwise and __bitwise__
kbuild: make it possible for the linker to discard local symbols from vmlinux
kbuild: remove pointless strdup() on arguments passed to new_module() in modpost
kbuild: fix a few typos in top-level Makefile
kbuild: introduce destination-y for exported headers
kbuild: use git svn instead of git-svn in setlocalversion
kconfig: fix update-po-config to accect backslash in input
kbuild: fix option processing for -I in headerdep
