Commit graph

150,846 commits

Author SHA1 Message Date
Ben Dooks
36d543a3b5 [ARM] S3C64XX: Add definitions for the GPIO memory port configurations
Add defines for the registers that control the GPIO pins that are
run the memory interface.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:33:26 +00:00
Ben Dooks
2ae0b117a6 [ARM] S3C64XX: SYSCON power and sleep control register defines
Add the register defines for the sleep and power control
functions in the S3C64XX SYSCON register block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:33:08 +00:00
Linus Torvalds
a651d79979 Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  video: deferred io cleanup fix for sh_mobile_lcdcfb
  sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
2009-03-10 09:31:19 -07:00
Ben Dooks
2454e524bc [ARM] S3C64XX: Add S3C64XX_SPCON register bit definitions
Add the definitions for the SPCON register in the
GPIO block.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:30:44 +00:00
Ben Dooks
e383707131 [ARM] S3C64XX: Add GPIO SPCONSLP and SLPEN register definitions
Add GPIO register definitions for SPCONSLP and SLPEN
for controlling the state of the pins over sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:30:27 +00:00
Ben Dooks
333053733f [ARM] S3C64XX: Add EINT group regs and move IRQ_EINT to regs-gpio.h
Add definitions for the EINT group registers and move the EINT IRQ
register definitions out of arch/arm/plat-s3c64xx/irq-eint.c so that
they are available for re-use with PM and the other code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:29:11 +00:00
Ben Dooks
5b3d515fcf [ARM] S3C64XX: Add modem registers and a virtual map
Add the modem registers and a virtual mapping for the
modem block. This is is required as there are registers
that control the LCD block that need to be saved over
suspend as well as interrupt controls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-10 16:26:52 +00:00
Ingo Molnar
2395037e5d Merge branch 'core/printk' into tracing/ftrace 2009-03-10 17:17:32 +01:00
Steven Rostedt
2314c4ae14 tracing: add back the available_events file
The event directory files type and available_types were no longer
needed with the new TRACE_EVENT_FORMAT macros, they were deleted.
But by accident the available_events file was also removed.
This patch brings it back.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 12:04:02 -04:00
Peter Zijlstra
57310a98a3 sched: optimize ttwu vs group scheduling
Impact: micro-optimization

We can avoid the sched domain walk on try_to_wake_up() when we know
there are no groups.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236603381.8389.455.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 16:43:36 +01:00
Hugo Villeneuve
090cec81ae ALSA: ASoC: Davinci: Updated sffsdr_hw_params() function to new format
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 15:42:48 +00:00
Hugo Villeneuve
14cbba89ae ALSA: ASoC: Davinci: Replaced DAI format RIGHT_J by DSP_B for SFFSDR
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-10 15:42:48 +00:00
Mark Brown
b3d7e3c99d Merge commit 'takashi/topic/asoc' into for-2.6.30 2009-03-10 15:42:03 +00:00
Ingo Molnar
8c54436ae9 Merge branches 'sched/cleanups' and 'linus' into sched/core 2009-03-10 16:34:43 +01:00
Steven Rostedt
40e26815fa tracing: do not allow modifying the ftrace events via the event files
Impact: fix to prevent crash on calling NULL function pointer

The ftrace internal records have their format exported via the event
system under the ftrace subsystem. These are only for exporting the
format to allow binary readers to be able to parse them in a binary
output.

The ftrace subsystem events can only be enabled via the ftrace tracers
and do not have a registering function. The event files expect the
event record to have registering function and will call it directly.
Passing in a ftrace subsystem event will cause the kernel to crash
because it will execute a NULL pointer.

This patch prevents the ftrace subsystem from being viewable to the
event enabling files.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 11:32:40 -04:00
Masami Hiramatsu
7cf4942704 x86: expand irq-off region in text_poke()
Expand irq-off region to cover fixmap using code and cache synchronizing.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <49B54688.8090403@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 16:24:23 +01:00
Takashi Iwai
df481e41b9 ALSA: hda - Clean up Cxt5047 parser
Clean up Conexant 5047 pareser code:
 - Split mixer elements to separate arrays to reduce the duplicated
   entires
 - Fix mixer element names to the standard ones
 - Remove unneeded cxt5047_hp2_unsol_event; the normal unsol_event
   handler works fine.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:35:35 +01:00
Andrew Vasquez
5fa0ae1982 [SCSI] qla2xxx: Update version number to 8.03.00-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:28:03 -05:00
Andrew Vasquez
ca42f2b5f5 [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
The value is already pre-assigned prior to the qla2x00_mem_alloc().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:55 -05:00
Andrew Vasquez
c6b2fca820 [SCSI] qla2xxx: Correct truncation in return-code status checking.
QLA_* return codes are 'int' in size.  There were still several
legacy check-points which assumed a return-code width of 8-bits.
This could cause incorrect assumptions of 'good' status if a
return of QLA_FUNCTION_TIMEOUT.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Anirban Chakraborty
ee546b6e04 [SCSI] qla2xxx: Correct vport delete bug.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Lalit Chandivade
605aa2bcd5 [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
Use minimum value for max vport during firmware initialization in LOOP
topology. Using max vport value from get resource count in LOOP topology
causes firmware initialization failure.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Andrew Vasquez
6431c5dc5e [SCSI] qla2xxx: Correct address range checking for option-rom updates.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:53 -05:00
Steven Rostedt
ce8eb2bf05 tracing: fix printk format specifier
Impact: clean up

The offsetof and sizeof are of type size_t, and instead of typecasting
them to unsigned int for printk formatting, one could just use %zu.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 10:14:35 -04:00
Takashi Iwai
5b3a7440cb ALSA: hda - Fix / clean up init verbs for Cxt5047 codec
Fix the initial connections of output pins 0x13 and 0x1d for Conexant
5047 codec to point to the mixer amp properly.

Removed unneeded (doubly) verbs from arrays, also removed the unneeded
changing of widget 0x1c, which is now completely unused.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:13:25 +01:00
Takashi Iwai
3b628867f3 ALSA: hda - Remove superfluous verbs for Cxt5047 laptop-eapd model
Remove superfluous verbs from cxt5047_toshiba_init_verbs[].
Also fix comments and minor coding style issues.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:13:24 +01:00
Takashi Iwai
b880c74adf ALSA: hda - Create "Capture Source" control dynamically in patch_conexant.c
Create "Capture Source" control dynamically for Conexant codecs.
If only one capture item is available, don't create such a control
since it's just useless.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:13:23 +01:00
Takashi Iwai
dd5746a85c ALSA: hda - Create vmaster for conexant codecs
Instead of binding volumes, create a virtual master volume for Conexant
codecs.  This allows separate HP and speaker volume controls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-10 15:13:17 +01:00
Robert Love
4469c195da [SCSI] fcoe: Change fcoe receive thread nice value from 19 (lowest priority) to -20
This change makes the fcoe Rx threads have the same nice value
as lpfc and qla2xxx Rx threads.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:10:02 -05:00
Chris Leech
55c8bafba5 [SCSI] fcoe: fix handling of pending queue, prevent out of order frames (v3)
In fcoe_check_wait_queue() the queue length could temporarily drop to 0,
before the last frame was successfully sent.  This resulted in out of order
data frames within a single sequence, leading to IO timeout errors.

This builds on the approach from Vasu Dev to only fix the queue management in
fcoe_check_wait_queue, where my first patch added locking to the transmit
path even when the pending queue was not in use.

This patch continues to use fcoe_pending_queue.qlen instead of introducing a
new length counter, but takes precautions to ensure it never drops to 0 before
the final frame in the queue has successfully been passed to the netdev qdisc
layer.  It also includes some cleanup of fcoe_check_wait_queue and removes the
fcoe_insert_wait_queue(_head) wrapper functions.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:09:40 -05:00
Vasu Dev
c826a31457 [SCSI] fcoe: Out of order tx frames was causing several check condition SCSI status
frames followed by these errors in log.

	[sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
	[sdp] Sense Key : Aborted Command [current]
	[sdp] Add. Sense: Data phase error

This was causing some test apps to exit due to write failure under heavy
load.

This was due to a race around adding and removing tx frame skb in
fcoe_pending_queue, Chris Leech helped me to find that brief unlocking
period when pulling skb from fcoe_pending_queue in various contexts
(fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue
up on a failed fcoe_start_io could change skb/tx frame order in
fcoe_pending_queue. Thanks Chris.

This patch allows only single context to pull skb from fcoe_pending_queue
at any time to prevent above described ordering issue/race by use of
fcoe_pending_queue_active flag.

This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by
use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals
to clear and set lp->qfull.

I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH  will work better
in re/setting lp->qfull and these could be fine tuned for performance.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:09:21 -05:00
Roel Kluin
e904158159 [SCSI] fcoe: fix kfree(skb)
Use kfree_skb instead of kfree for struct sk_buff pointers.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:09:01 -05:00
Yi Zou
74846bf85e [SCSI] fcoe: ETH_P_8021Q is already in if_ether and fcoe is not using it anyway
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:07:09 -05:00
Yi Zou
422819cfa3 [SCSI] libfc: do not change the fh_rx_id of a recevied frame
We shouldn't be altering inbound frames.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:06:36 -05:00
Robert Love
03ec862dff [SCSI] fcoe: Correct fcoe_transports initialization vs. registration
The registration function shouldn't initialize the mutex or
list head. The fcoe SW transport should initialize itself
before registering.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:06:17 -05:00
Robert Love
a468f328ad [SCSI] fcoe: Use setup_timer() and mod_timer()
Use helper functions for watchdog timer setup.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:05:57 -05:00
Robert Love
fc47ff6b1b [SCSI] libfc, fcoe: Remove unnecessary cast by removing inline wrapper
Comment from "Andrew Morton <akpm@linux-foundation.org>"

> +{
> +     return (struct fcoe_softc *)lport_priv(lp);

unneeded/undesirable cast of void*.  There are probably zillions of
instances of this - there always are.

This whole inline function was unnecessary. The FCoE layer knows
that it's data structure is stored in the lport private data, it
can just access it from lport_priv().

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:05:35 -05:00
Robert Love
b2ab99c9a3 [SCSI] libfc, fcoe: Cleanup function formatting and minor typos
1) There were a few functions with a strange layout, i.e. all
   arguments on the second line, when not necessary.

   Where ever possible I moved the return value to the same line
   as the function name. However, when the line was too long
   to have a single argument on the same line I moved the
   return value to above line. For example:

   <short return> <function name>(<arg 1>, <arg2>)

   and

   <very long return value>
   <function name>(<arg1>,
		   <arg2>)

2) Removed one extra whitespace line

3) Fixed two typos

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:05:09 -05:00
Robert Love
34f42a070f [SCSI] libfc, fcoe: Fix kerneldoc comments
1) Added '()' for function names in kerneldoc comments

2) Changed comment bookends from '**/' to '*/'. The comment on the the
   mailing list was that '**/' "is consistently unconventional.  Not
   wrong, just odd." The Documentation/kernel-doc-nano-HOWTO.txt
   states that kerneldoc comment blocks should end with '**/' but most
   (if not all) instance I found under drivers/scsi/ were only using
   the '*/' so I converted to that style.

3) Removed incorrect linebreaks in kerneldoc comments where found

4) Removed a few unnecessary blank comment lines in kerneldoc comment
   blocks

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:04:40 -05:00
Américo Wang
bbb76b552a ptrace: remove a useless goto
Impact: cleanup

Obviously, this goto is useless. Remove it.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Roland McGrath <roland@redhat.com>
LKML-Reference: <20090310093447.GC3179@hack>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-10 13:39:29 +01:00
Ayaz Abdulla
3e1a3ce2f1 forcedeth: version bump to 64
This patch bumps up the version to 0.64

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:52 -07:00
Ayaz Abdulla
1b2bb76f57 forcedeth: fix irq clearing and napi spin lock changes
This patch clears the irqstatus register with the exact same events it
has read from it. Since the read-write operation is not atomic, a new
irqstatus bit could have been set in between these operations and would
then be cleared accidentally.

Secondly, we now don't need any spin lock protection when
scheduling/completing napi poll as the isr will not execute anymore (as
we turn off all interrupts now).

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:51 -07:00
Ayaz Abdulla
6cef67a02f forcedeth: performance changes
This patch modifies the throughput mode poll settings to reduce the
number of interrupts. This is only used by older hardware that need a
timer irq in throughput mode.

Secondly, this patch increases the default rx ring from 128 to 512. This
drastically improves bandwidth utilization for small packets sizes i.e
512 bytes.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:50 -07:00
Ayaz Abdulla
4145ade2bb forcedeth: add interrupt moderation logic
This patch adds the logic to moderate the interrupts by changing the
mode between throughput and poll. If there has been a large amount of
time without any burst of network load, the code will transition to pure
throughput mode (where each tx/rx/other will cause an interrupt). If
bursts of network load occurs, it will transition to poll based mode to
help reduce cpu utilization (it will not interrupt on each packet) while
maintaining the optimum network bandwidth utilization.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:49 -07:00
Ayaz Abdulla
b67874ac16 forcedeth: remove isr processing loop
This patch is only a subset of changes so that it is easier to see the
modifications. This patch removes the isr 'for' loop and shifts all the
logic to account for new tab spacing.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:49 -07:00
Ayaz Abdulla
9e184767c9 forcedeth: add new optimization mode
A new optimization mode called Dynamic has been added. This will be mode
where interrupt moderation logic will dynamically switch between pure
throughput mode and poll based (called 'cpu') mode.

Also, for newer chipsets, the timer irq is not needed for throughput
mode. Secondly, since we are modifying the irqmask to change between
modes, msix is not supported.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:48 -07:00
Ayaz Abdulla
f27e6f39fc forcedeth: napi - handle all processing
The napi poll routine has been modified to handle all interrupt events
and process them accordingly. Therefore, the ISR will now only schedule
the napi poll and disable all interrupts instead of just disabling rx
interrupt.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:48 -07:00
Ayaz Abdulla
33912e72d0 forcedeth: add/modify tx done with limit
There are two tx_done routines to handle tx completion processing. Both
these functions now take in a limit value and return the amount of tx
completions. This will be used by a future patch to determine the total
amount of work done.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:47 -07:00
Ayaz Abdulla
2daac3e8f8 forcedeth: remove overhead
This patch removes unnecessary overhead code. Firstly, there is no nead
to mask off unwanted interrupts as we will be checking against the
irqmask field anyways. Secondly, there has been no value in last few
years from detecting error or unknown interrupts.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:47 -07:00
Ayaz Abdulla
582806be06 forcedeth: save irq events for napi processing
This patch will save the irq events in the driver's context so that the
napi routine knows which interrupts have occurred. Subsequent changes
will be moving all interrupt processing into the napi poll routine.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10 05:29:46 -07:00