Commit graph

150,846 commits

Author SHA1 Message Date
Guo-Fu Tseng
eb352b838d jme: Clear all modified GHC register flags
Clear all modified GHC register flags.

Fixed-by: Ethan Hsiao <ethanhsiao@jmicron.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:39:32 -08:00
Guo-Fu Tseng
7f7fd2da92 jme: Fix pci sync
We should sync ring descriptor to pci device after modifying it.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:39:31 -08:00
Guo-Fu Tseng
07c8d2aad7 jme: Modifies messages to display correct hardware version
This patch modifies messages to display correct hardware version.
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:39:31 -08:00
Ivan Vecera
6709fe9a27 r8169: read MAC address from EEPROM on init (2nd attempt)
This is 2nd attempt to implement the initialization/reading of MAC address
from EEPROM. The first used PCI's VPD and there were some problems, some
devices are not able to read EEPROM content by VPD. The 2nd one uses direct
access to EEPROM through bit-banging interface and my testing results seem
to be much better.

I tested 5 systems each with different Realtek NICs and I didn't find any
problem. AFAIK Francois's NICs also works fine.

Original description:
This fixes the problem when MAC address is set by ifconfig or by
ip link commands and this address is stored in the device after
reboot. The power-off is needed to get right MAC address.
This is problem when Xen daemon is running because it renames the device
name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF.
After reboot the device is still using FE:FF:FF:FF:FF:FF.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:34:48 -08:00
David S. Miller
fc1f209514 ixgbe: Fix some compiler warnings.
'pap' is never used in ixgbe_dcb_hw_config_82599()
and 'eec' in ixgbe_acquire_eeptom() is only used when
status == 0 but GCC has some trouble seeing that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:32:39 -08:00
David S. Miller
d517c4a1da typhoon: Need non-vmalloc memory to DMA firmware to the card.
request_firmware() gives vmalloc'd memory, which is not suitable
for pci_map_single() and friends.

Use a kmalloc()'d copy of the firmware for this DMA operation.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 20:24:32 -08:00
Paul Moore
d7f59dc464 selinux: Fix a panic in selinux_netlbl_inode_permission()
Rick McNeal from LSI identified a panic in selinux_netlbl_inode_permission()
caused by a certain sequence of SUNRPC operations.  The problem appears to be
due to the lack of NULL pointer checking in the function; this patch adds the
pointer checks so the function will exit safely in the cases where the socket
is not completely initialized.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-03-02 09:30:04 +11:00
Ingo Molnar
645af4e9e0 Merge branch 'x86/pat' into x86/core 2009-03-01 12:48:28 +01:00
Ingo Molnar
55f2b78995 Merge branch 'x86/urgent' into x86/pat 2009-03-01 12:47:58 +01:00
Ingo Molnar
f5c1aa1537 Revert "gpu/drm, x86, PAT: PAT support for io_mapping_*"
This reverts commit 17581ad812.

Sitsofe Wheeler reported that /dev/dri/card0 is MIA on his EeePC 900
and bisected it to this commit.

Graphics card is an i915 in an EeePC 900:

 00:02.0 VGA compatible controller [0300]:
   Intel Corporation Mobile 915GM/GMS/910GML
     Express Graphics Controller [8086:2592] (rev 04)

( Most likely the ioremap() of the driver failed and hence the card
  did not initialize. )

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Bisected-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-01 12:47:49 +01:00
PJ Waskiewicz
e8e26350f1 ixgbe: Add 82599 device id's, hook it up into the main driver.
With the hardware-specific code in place, add all supported device id's,
along with base driver changes to enable 82599 devices.  The devices
being enabled are:

8086:10f7: 82599EB 10 Gigabit KX4 Network Connection
8086:10fb: 82599EB 10 Gigabit Network Connection

The device 8086:10fb is a fully-pluggable SFP+ NIC.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:24:36 -08:00
PJ Waskiewicz
235ea828a1 ixgbe: Add DCB for 82599, remove BCN support
This patch adds the DCB (Data Center Bridging) support for 82599 hardware.
This is similar to how the 82598 DCB code works.

This patch also removes the BCN (Backwards Congestion Notification) netlink
configuration code from the driver.  BCN was a pre-standard congestion
notification framework, and was not what the IEEE body decided upon for
standard congestion management. QCN (802.1Qau), Quantized Congestion
Notification is the accepted standard, which is not supported by 82599,
hence we remove the support altogether.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:24:35 -08:00
PJ Waskiewicz
11afc1b1fd ixgbe: Add hardware specific initialization code for 82599 devices
This patch adds the hardware initialization code specific to 82599.  This
is similar to the 82598 hardware initialization code.  It also includes all
changes to the existing hardware init code to support 82599.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:24:33 -08:00
Ilpo Järvinen
9ec06ff57a tcp: fix retrans_out leaks
There's conflicting assumptions in shifting, the caller assumes
that dupsack results in S'ed skbs (or a part of it) for sure but
never gave a hint to tcp_sacktag_one when dsack is actually in
use. Thus DSACK retrans_out -= pcount was not taken and the
counter became out of sync. Remove obstacle from that information
flow to get DSACKs accounted in tcp_sacktag_one as expected.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:21:36 -08:00
Chris Leech
709ab3261e net headers: export dcbnl.h
The DCB netlink interface is required for building the userspace tools
available at e1000.sourceforge.net

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:19:36 -08:00
Chris Leech
5c25222180 net headers: cleanup dcbnl.h
1) add an include for <linux/types.h>
2) change dcbmsg.dcb_family from unsigned char to __u8 to be more
   consistent with use of kernel types

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:19:35 -08:00
Herbert Xu
4ead443163 netpoll: Add drop checks to all entry points
The netpoll entry checks are required to ensure that we don't
receive normal packets when invoked via netpoll.  Unfortunately
it only ever worked for the netif_receive_skb/netif_rx entry
points.  The VLAN (and subsequently GRO) entry point didn't
have the check and therefore can trigger all sorts of weird
problems.

This patch adds the netpoll check to all entry points.

I'm still uneasy with receiving at all under netpoll (which
apparently is only used by the out-of-tree kdump code).  The
reason is it is perfectly legal to receive all data including
headers into highmem if netpoll is off, but if you try to do
that with netpoll on and someone gets a printk in an IRQ handler                                             
you're going to get a nice BUG_ON.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01 00:11:52 -08:00
Tejun Heo
d0c4f57027 bootmem, x86: further fixes for arch-specific bootmem wrapping
Impact: fix new breakages introduced by previous fix

Commit c132937556 tried to clean up
bootmem arch wrapper but it wasn't quite correct.  Before the commit,
the followings were broken.

* Low level interface functions prefixed with __ ignored arch
  preference.

* reserve_bootmem(...) can't be mapped into
  reserve_bootmem_node(NODE_DATA(0)->bdata, ...) because the node is
  not preference here.  The region specified MUST fall into the
  specified region; otherwise, it will panic.

After the commit,

* If allocation fails for the arch preferred node, it should fallback
  to whatever is available.  Instead, it simply failed allocation.

There are too many internal details to allow generic wrapping and
still keep things simple for archs.  Plus, all that arch wants is a
way to prefer certain node over another.

This patch drops the generic wrapping around alloc_bootmem_core() and
add alloc_bootmem_core() instead.  If necessary, arch can define
bootmem_arch_referred_node() macro or function which takes all
allocation information and returns the preferred node.  bootmem
generic code will always try the preferred node first and then
fallback to other nodes as usual.

Breakages noted and changes reviewed by Johannes Weiner.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2009-03-01 16:06:56 +09:00
Tejun Heo
af6326d72c alpha: fix typo in recent early vmalloc change
Impact: fix build

Add missing 'o' in variable name.  Compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
2009-03-01 16:03:16 +09:00
Tejun Heo
02d51fdfb2 percpu: kill compile warning in pcpu_populate_chunk()
Impact: remove compile warning

Mark local variable map_end in pcpu_populate_chunk() with
uninitialized_var().  The variable is always used in tandem with
map_start and guaranteed to be initialized before use but gcc doesn't
understand that.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
2009-03-01 15:42:36 +09:00
David S. Miller
8010dc306b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-02-28 22:32:16 -08:00
Grant Likely
6b8036a877 powerpc/4xx: Enable SERIAL_OF support by default for Virtex platforms
Virtex FPGA designs have two serial port logic cores to choose from; the
simple uartlite, and the full featured uart16550.  Both cores are in
common use so the defconfig should support both of them.  Currently
only console on uartlite is supported in the defconfig.  This patch adds
console support for the 16550 core.

The Virtex reference designs do not work without this patch.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-28 21:30:38 -07:00
Jaswinder Singh Rajput
327f4387e3 x86: remove double copy of show_cpuinfo_core for 32 and 64 bit
Impact: unification

show_cpuinfo_core is identical for 32 and 64 bit and can be unified,
and CONFIG_X86_HT inherently depends on CONFIG_X86_SMP.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-28 19:26:33 -08:00
Theodore Ts'o
afc32f7ee9 ext4: Track lifetime disk writes
Add a new superblock value which tracks the lifetime amount of writes
to the filesystem.  This is useful in estimating the amount of wear on
solid state drives (SSD's) caused by writes to the filesystem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-28 19:39:58 -05:00
Aneesh Kumar K.V
d6014301b5 ext4: Fix discard of inode prealloc space with delayed allocation.
With delayed allocation we should not/cannot discard inode prealloc
space during file close. We would still have dirty pages for which we
haven't allocated blocks yet. With this fix after each get_blocks
request we check whether we have zero reserved blocks and if yes and
we don't have any writers on the file we discard inode prealloc space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-27 22:36:43 -04:00
David S. Miller
18963caaf5 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-28 15:36:58 -08:00
David S. Miller
98f8948f13 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-02-28 15:34:24 -08:00
Andy Whitcroft
0f4954819f Input: psmouse - add newline to OLPC HGPK touchpad debugging
When probing for the OLPC HGPK touchpad the ID of the probed touchpad is
emitted, but the debug is missing the terminating newline.  This causes
later information to run into it, and for that to be categorised
incorrectly at KERN_DBG.  Fix this up.

Reported-by: Matt Zimmerman <mdz@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:56:23 -08:00
Arjan Opmeer
9ab7b25e6a Input: elantech - touchpad driver miss-recognising logitech mice
Some Logitech mice react to the magic knock like Elantech touchpad would.
This leads to those mice being misdetected as Elantech touchpads.  Add a
version query to elantech_detect() to distinguish the two.

[dtor@mail.ru:
 - lower severity of some messages - when we are not sure yet if
   device is Elantech or not not responding to knock is not an error.
]

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:39 -08:00
Andy Whitcroft
4d36845680 Input: synaptics - ensure we reset the device on resume
When resuming from suspend newer Synaptics touchpads do not recover
correctly.  Analysis of the resume sequence as applied in Linux was
compared to that of other operating systems.  This indicated that the
other OSs were resetting the mouse before attempting to detect it (for
all Synaptics touchpads, old and new).  Applying this same modification
fixes these newer Synaptics touchpads and brings the driver into line
with common OS reset behaviour.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:32 -08:00
Daniel Ritz
139ebe8dc8 Input: usbtouchscreen - fix eGalax HID ignoring
Commit ec42d4481e broke usbtouchscreen for
some eGalax/EETI devices that claim to be HID, but are not.

Devices confirmed to be real HID have the class set to HID and the protocol
set to 'mouse'.  Some have HID class but protocol set to 'none'. Those are
not HID and should be driven by usbtouchscreen.

Fix the device ignoring macro by adding match for the protocol too.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28 14:01:25 -08:00
Mark Brown
8b37dbd2a1 ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pins
On some systems it is desirable for control for DAPM pins to be provided
to user space. This is the case with things like GSM modems which are
controlled primarily from user space, for example. Provide a helper which
exposes the state of a DAPM pin to user space for use in cases like this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 21:31:21 +00:00
Daniel Mack
4eae080dda ASoC: Add cs4270 support for slave mode configurations
Added support for scenarios where the Cirrus CS4270 audio codec is slave
to the bitclk and lrclk. Mixed setups are unsupported.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 17:18:25 +00:00
Ben Dooks
c8efef1745 ASoC: Fix copyright statements on Simtec files
Fix the copyright statements in two of the S3C24XX ASoC files
that have (c) when we require the full word.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28 17:18:24 +00:00
Ingo Molnar
92b9af9e4f x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
Impact: build fix

Theodore Ts reported that the i915 driver needs these symbols:

 ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined!

Reported-by: Theodore Ts'o <tytso@mit.edu> wrote:
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 14:22:44 +01:00
Jaswinder Singh Rajput
f87ad35d37 x86: AMD Support for perf_counter
Supported basic performance counter for AMD K7 and later:

$ perfstat -e 0,1,2,3,4,5,-1,-2,-3,-4,-5 ls > /dev/null

 Performance counter stats for 'ls':

      12.298610  task clock ticks     (msecs)

        3298477  CPU cycles           (events)
        1406354  instructions         (events)
         749035  cache references     (events)
          16939  cache misses         (events)
         100589  branches             (events)
          11159  branch misses        (events)
       7.627540  cpu clock ticks      (msecs)
      12.298610  task clock ticks     (msecs)
            500  pagefaults           (events)
              6  context switches     (events)
              3  CPU migrations       (events)

 Wall-clock time elapsed:     8.672290 msecs

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 10:38:32 +01:00
Jaswinder Singh Rajput
b56a3802dc x86: prepare perf_counter to add more cpus
Introduced  struct pmc_x86_ops to add more cpus.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 10:38:27 +01:00
Ingo Molnar
acdb2c2879 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-02-28 10:15:58 +01:00
Steven Rostedt
f2034f1e1a tracing: create the C style tracing for the irq subsystem
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:14 -05:00
Steven Rostedt
629928041c tracing: create the C style tracing for the sched subsystem
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:13 -05:00
Steven Rostedt
fd99498989 tracing: add raw fast tracing interface for trace events
This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:

 enable : values 0 or 1 to enable or disable the trace event.

 available_types: values 'raw' and 'printf' which indicate the tracing
       types available for the trace point. If a developer does not
       use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
       macro, then only 'printf' will be available. This file is
       read only.

 type: values 'raw' or 'printf'. This indicates which type of tracing
       is active for that trace point. 'printf' is the default and
       if 'raw' is not available, this file is read only.

 # echo raw > /debug/tracing/events/sched/sched_wakeup/type
 # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable

 Will enable the C style tracing for the sched_wakeup trace point.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 04:04:03 -05:00
Hiroshi Shimamoto
1fae0279ce x86: signal: introduce helper align_sigframe()
Impact: cleanup

Introduce helper align_sigframe() to align stack pointer for signal frame.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:31 +01:00
Hiroshi Shimamoto
75779f0526 x86: signal: unify get_sigframe()
Impact: cleanup

Unify get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:30 +01:00
Hiroshi Shimamoto
36a4526583 x86: signal: use 16 bytes boundary for rt_sigframe
Impact: cleanup

Supporting xsave/xrestore introduces 64 bytes boundary for save_i387_xstate().
16 bytes boundary is OK for rt_sigframe.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:30 +01:00
Hiroshi Shimamoto
97286a2b64 x86: signal: intrroduce get_sigframe() and replace get_sigstack()
Impact: cleanup

Introduce get_sigframe() like 32-bit to replace get_sigstack().
Move the i387 stuff into get_sigframe().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:29 +01:00
Hiroshi Shimamoto
144b0712dd x86: signal: add __user annotation
Impact: cleanup

Add missing __user annotation to the parameter of get_sigframe().
Also change cast type to void __user * of *fpstate.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-28 09:17:29 +01:00
Steven Rostedt
c32e827b25 tracing: add raw trace point recording infrastructure
Impact: lower overhead tracing

The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.

Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.

I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.

This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.

The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)

They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.

So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.

Here's what usage looks like:

  TRACE_EVENT_FORMAT(name,
	TPPROTO(proto),
	TPARGS(args),
	TPFMT(fmt, fmt_args),
	TRACE_STUCT(
		TRACE_FIELD(type1, item1, assign1)
		TRACE_FIELD(type2, item2, assign2)
			[...]
	),
	TPRAWFMT(raw_fmt)
	);

Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.

 name: is the unique identifier of the trace point
 proto: The proto type that the trace point uses
 args: the args in the proto type
 fmt: printf format to use with the event printf tracer
 fmt_args: the printf argments to match fmt

 TRACE_STRUCT starts the ability to create a structure.
 Each item in the structure is defined with a TRACE_FIELD

  TRACE_FIELD(type, item, assign)

 type: the C type of item.
 item: the name of the item in the stucture
 assign: what to assign the item in the trace point callback

 raw_fmt is a way to pretty print the struct. It must match
  the order of the items are added in TRACE_STUCT

 An example of this would be:

 TRACE_EVENT_FORMAT(sched_wakeup,
	TPPROTO(struct rq *rq, struct task_struct *p, int success),
	TPARGS(rq, p, success),
	TPFMT("task %s:%d %s",
	      p->comm, p->pid, success?"succeeded":"failed"),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, pid, p->pid)
		TRACE_FIELD(int, success, success)
	),
	TPRAWFMT("task %d success=%d")
	);

 This creates us a unique struct of:

 struct {
	pid_t		pid;
	int		success;
 };

 And the way the call back would assign these values would be:

	entry->pid = p->pid;
	entry->success = success;

The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer.  Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.

The developer would only need to touch the files in include/trace/*.h

Again, I would like to give special thanks to Tom Zanussi for this
nice idea.

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:09:32 -05:00
Steven Rostedt
ef5580d0ff tracing: add interface to write into current tracer buffer
Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.

But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:44 -05:00
Steven Rostedt
3d7ba938da tracing: add subsystem sched for sched events
Add the TRACE_SYSTEM sched for the sched events.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:31 -05:00
Steven Rostedt
0ec2ef1505 tracing: add subsystem irq for irq events
Add the TRACE_SYSTEM irq for the irq events.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 03:06:13 -05:00