Commit graph

150,846 commits

Author SHA1 Message Date
Andrew Morton
f82da72339 Documentation/connector/cn_test.c: don't use gfp_any()
cn_test_timer_func() is a timer handler and can never use GFP_KERNEL -
there's no point in using gfp_any() here.

Also, use setup_timer().

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:47:01 -08:00
Andrew Morton
9970937273 net: don't use in_atomic() in gfp_any()
The problem is that in_atomic() will return false inside spinlocks if
CONFIG_PREEMPT=n.  This will lead to deadlockable GFP_KERNEL allocations
from spinlocked regions.

Secondly, if CONFIG_PREEMPT=y, this bug solves itself because networking
will instead use GFP_ATOMIC from this callsite.  Hence we won't get the
might_sleep() debugging warnings which would have informed us of the buggy
callsites.

Solve both these problems by switching to in_interrupt().  Now, if someone
runs a gfp_any() allocation from inside spinlock we will get the warning
if CONFIG_PREEMPT=y.

I reviewed all callsites and most of them were too complex for my little
brain and none of them documented their interface requirements.  I have no
idea what this patch will do.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:43:17 -08:00
Roel Kluin
fb0886745a IRDA: cnt is off by 1
If no prior break occurs, cnt reaches 101 after the loop, so we are still able
to change speed when cnt has become 100.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:42:31 -08:00
Dhananjay Phadke
acdb602fb3 netxen: remove pcie workaround
Remove workaround for pcie bug in early revisions of NX3031
(rev 41 or earlier). This is taken care of during firmware init.

The workaround required writing pcie config reg of every
pcie function on a card, not all of which are enabled.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:41:14 -08:00
Roel Kluin
cff71e89a8 sun3: print when lance_open() fails
With while (--i > 0) { ... } i reaches 0; print when lance_open() fails

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:40:20 -08:00
Ron Mercer
79d2b29e8a qlge: bugfix: Add missing rx buf clean index on early exit.
The large receive buffer queue is not properly tracking the current
index in the case where an early exit occurs.  This can happen when a
page alloc or dma mapping fails.  If this occurs the queue will get
out of sync and invalid indexes can be written to the hardware.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:34 -08:00
Ron Mercer
def48b6e32 qlge: bugfix: Fix RX scaling values.
Receive packets were only scaling across 2 of the receive queues. The
value was hardcoded to 2 instead of being based on how many rx queues
were running.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:18 -08:00
Ron Mercer
0d979f74a9 qlge: bugfix: Fix TSO breakage.
Moved the buffer mapping to a point after TSO logic has modified the
iph->check field. We were seeing stale data on the PCIe bus.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:38:03 -08:00
Ron Mercer
06a3d510fa qlge: bugfix: Add missing dev_kfree_skb_any() call.
We put the skb back if we can't get mapping for it.  We don't
want unmapped buffers on our receive buffer queue.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:48 -08:00
Ron Mercer
f2603c2c57 qlge: bugfix: Add missing put_page() call.
We put the page back if we can't get mapping for it.  We don't
want unmapped buffers on our receive buffer queue.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:32 -08:00
Ron Mercer
6497b607fb qlge: bugfix: Fix fatal error recovery hang.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:37:13 -08:00
Ron Mercer
7a9deb661f qlge: bugfix: Use netif_receive_skb() and vlan_hwaccel_receive_skb().
Replace calls to vlan_hwaccel_rx() and netif_rx().
Thanks to Dave Miller for pointing out the the driver was making
the wrong upcall for passing packets into the stack.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:36:50 -08:00
Roel Kluin
d4675b52a9 TG3: limit reaches -1
With while (limit--) { ... } limit reaches -1, so 0 means success.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12 16:33:27 -08:00
Kumar Gala
96a8bac589 powerpc/fsl-booke: Fix compile warning
arch/powerpc/mm/fsl_booke_mmu.c: In function 'adjust_total_lowmem':
arch/powerpc/mm/fsl_booke_mmu.c:221: warning: format '%ld' expects type 'long int', but argument 3 has type 'phys_addr_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:54:53 -06:00
Kumar Gala
70fe3af840 powerpc/book-3e: Introduce concept of Book-3e MMU
The Power ISA 2.06 spec introduces a standard MMU programming model that
is based on the Freescale Book-E MMU programing model.  The Freescale
version is pretty backwards compatiable with the ISA 2.06 definition so
we are starting to refactor some of the Freescale code so it can be
easily shared.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:51:33 -06:00
Kumar Gala
d66c82ea45 powerpc/fsl-booke: Add new ISA 2.06 page sizes and MAS defines
The Power ISA 2.06 added power of two page sizes to the embedded MMU
architecture.  Its done it such a way to be code compatiable with the
existing HW.  Made the minor code changes to support both power of two
and power of four page sizes.  Also added some new MAS bits and macros
that are defined as part of the 2.06 ISA.  Renamed some things to use
the 'Book-3e' concept to convey the new MMU that is based on the
Freescale Book-E MMU programming model.

Note, its still invalid to try and use a page size that isn't supported
by cpu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:37:11 -06:00
Randy Dunlap
b53fab9d48 ima: fix build error
IMA_LSM_RULES requires AUDIT.  This is automatic if SECURITY_SELINUX=y
but not when SECURITY_SMACK=y (and SECURITY_SELINUX=n), so make the
dependency explicit.  This fixes the following build error:

security/integrity/ima/ima_policy.c:111:error: implicit declaration of function 'security_audit_rule_match'
security/integrity/ima/ima_policy.c:230:error: implicit declaration of function 'security_audit_rule_init'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-02-13 09:27:56 +11:00
Thomas Gleixner
7ad9de6ac8 x86: CPA avoid repeated lazy mmu flush
Impact: Flush the lazy MMU only once

Pending mmu updates only need to be flushed once to bring the
in-memory pagetable state up to date.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Thomas Gleixner
34b0900d32 x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context
Impact: Catch cases where lazy MMU state is active in a preemtible context

arch_flush_lazy_mmu_cpu() has been changed to disable preemption so
the checks in enter/leave will never trigger. Put the preemtible()
check into arch_flush_lazy_mmu_cpu() to catch such cases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Jeremy Fitzhardinge
d85cf93da6 x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption
Impact: avoid access to percpu vars in preempible context

They are intended to be used whenever there's the possibility
that there's some stale state which is going to be overwritten
with a queued update, or to force a state change when we may be
in lazy mode.  Either way, we could end up calling it with
preemption enabled, so wrap the functions in their own little
preempt-disable section so they can be safely called in any
context (though preemption should never be enabled if we're actually
in a lazy state).

(Move out of line to avoid #include dependencies.)
    
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-02-12 23:11:58 +01:00
Felix Blyakher
8aa4349ad5 Merge branch 'master' of git://git.kernel.org/pub/scm/fs/xfs/xfs 2009-02-12 15:06:27 -06:00
Felix Blyakher
b747664516 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-02-12 15:05:33 -06:00
Steven Rostedt
2a7b8df04c sched: do not account for NMIs
Impact: avoid corruption in system time accounting

Martin Schwidefsky told me that there was an issue with NMIs and
system accounting. The problem is that the accounting code is
not reentrant, and if an NMI goes off after an interrupt it can
corrupt the accounting.

For now, the best we can do is to treat NMIs like SMIs and they
are not accounted for.

This patch changes nmi_enter to not call __irq_enter and to do
the preempt-count and tracing calls directly.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 14:16:46 -05:00
Yan Zheng
2456242530 Btrfs: hold trans_mutex when using btrfs_record_root_in_trans
btrfs_record_root_in_trans needs the trans_mutex held to make sure two
callers don't race to setup the root in a given transaction.  This adds
it to all the places that were missing it.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-02-12 14:14:53 -05:00
Chris Mason
4008c04a07 Btrfs: make a lockdep class for the extent buffer locks
Btrfs is currently using spin_lock_nested with a nested value based
on the tree depth of the block.  But, this doesn't quite work because
the max tree depth is bigger than what spin_lock_nested can deal with,
and because locks are sometimes taken before the level field is filled in.

The solution here is to use lockdep_set_class_and_name instead, and to
set the class before unlocking the pages when the block is read from the
disk and just after init of a freshly allocated tree block.

btrfs_clear_path_blocking is also changed to take the locks in the proper
order, and it also makes sure all the locks currently held are properly
set to blocking before it tries to retake the spinlocks.  Otherwise, lockdep
gets upset about bad lock orderin.

The lockdep magic cam from Peter Zijlstra <peterz@infradead.org>

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 14:09:45 -05:00
Christoph Hellwig
7c8f7af67d xfs: reject swapext ioctl on swapfiles
Swapfiles are magic - I/O is directly initialized by the VM without
involving the filesystem.  Swapping out extents underneath the VM thus
can cause severe problems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-12 19:56:00 +01:00
Christoph Hellwig
264307520b xfs: fix error handling in xfs_log_mount
We can't just call xfs_log_unmount_dealloc on any failure because the
ail thread which is torn down by xfs_log_unmount_dealloc might not
be initialized yet.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reported-by: Lachlan McIlroy <lachlan@sgi.com>
2009-02-12 19:55:48 +01:00
Steven Rostedt
45141d4667 ring-buffer: rename label out_unlock to out_reset
Impact: clean up

While reviewing the ring buffer code, I thougth I saw a bug with

	if (!__raw_spin_trylock(&cpu_buffer->lock))
		goto out_unlock;

But I forgot that we use a variable "lock_taken" that is set if
the spinlock is taken, and only unlock it if that variable is set.

To avoid further confusion from other reviewers, this patch
renames the label out_unlock with out_reset, which is the more
appropriate name.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 13:39:46 -05:00
Linus Torvalds
071a0bc2ce Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  mm: Export symbol ksize()
2009-02-12 09:56:14 -08:00
Steven Rostedt
5a5fb7dbe8 preempt-count: force hardirq-count to max of 10
To add a bit in the preempt_count to be set when in NMI context, we
found that some archs did not have enough bits to spare. This is
due to the hardirq_count being a mask that can hold NR_IRQS.

Some archs allow for over 16000 IRQs, and that would require a mask
of 14 bits. The sofitrq mask is 8 bits and the preempt disable mask
is also 8 bits.  The PREEMP_ACTIVE bit is bit 30, and bit 31 would
make the preempt_count (which is type int) a negative number.
A negative preempt_count is a sign of failure.

Add them up 14+8+8+1+1 you get 32 bits. No room for the NMI bit.

But the hardirq_count is to track the number of nested IRQs, not
the number of total IRQs.  This originally took the paranoid approach
of setting the max nesting to NR_IRQS. But when we have archs with
over 1000 IRQs, it is not practical to think they will ever all
nest on a single CPU. Not to mention that this would most definitely
cause a stack overflow.

This patch sets a max of 10 bits to be used for IRQ nesting.
I did a 'git grep HARDIRQ' to examine all users of HARDIRQ_BITS and
HARDIRQ_MASK, and found that making it a max of 10 would not hurt
anyone. I did find that the m68k expected it to be 8 bits, so
I allow for the archs to set the number to be less than 10.

I removed the setting of HARDIRQ_BITS from the archs that set it
to more than 10. This includes ALPHA, ia64 and avr32.

This will always allow room for the NMI bit, and if we need to allow
for NMI nesting, we have 4 bits to play with.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 11:19:05 -05:00
Nick Piggin
3a4c6800f3 Fix page writeback thinko, causing Berkeley DB slowdown
A bug was introduced into write_cache_pages cyclic writeout by commit
31a12666d8 ("mm: write_cache_pages cyclic
fix").  The intention (and comments) is that we should cycle back and
look for more dirty pages at the beginning of the file if there is no
more work to be done.

But the !done condition was dropped from the test.  This means that any
time the page writeout loop breaks (eg.  due to nr_to_write == 0), we
will set index to 0, then goto again.  This will set done_index to
index, then find done is set, so will proceed to the end of the
function.  When updating mapping->writeback_index for cyclic writeout,
we now use done_index == 0, so we're always cycling back to 0.

This seemed to be causing random mmap writes (slapadd and iozone) to
start writing more pages from the LRU and writeout would slowdown, and
caused bugzilla entry

	http://bugzilla.kernel.org/show_bug.cgi?id=12604

about Berkeley DB slowing down dramatically.

With this patch, iozone random write performance is increased nearly
5x on my system (iozone -B -r 4k -s 64k -s 512m -s 1200m on ext2).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Reported-and-tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-12 08:10:53 -08:00
Ingo Molnar
9f8d979f08 softlockup: move 'one' to the softlockup section in sysctl.c
CONFIG_SOFTLOCKUP=y || CONFIG_DETECT_HUNG_TASKS=y is now the only user
of the 'one' constant in kernel/sysctl.c. Move it to the softlockup
block of constants.

This fixes a GCC warning.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 17:08:15 +01:00
Kirill A. Shutemov
b1aabecd55 mm: Export symbol ksize()
Commit 7b2cd92adc ("crypto: api - Fix
zeroing on free") added modular user of ksize(). Export that to fix
crypto.ko compilation.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-02-12 17:50:46 +02:00
Julia Lawall
3f3420df50 Btrfs: fs/btrfs/volumes.c: remove useless kzalloc
The call to kzalloc is followed by a kmalloc whose result is stored in the
same variable.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 10:16:03 -05:00
Qinghuang Feng
a48ddf08ba Btrfs: remove unused code in split_state()
These two lines are not used, remove them.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 14:25:23 -05:00
Jeff Mahoney
e00f730865 Btrfs: remove btrfs_init_path
btrfs_init_path was initially used when the path objects were on the
stack.  Now all the work is done by btrfs_alloc_path and btrfs_init_path
isn't required.

This patch removes it, and just uses kmem_cache_zalloc to zero out the object.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 14:11:25 -05:00
Jeff Mahoney
7951f3cefb Btrfs: balance_level checks !child after access
The BUG_ON() is in the wrong spot.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 10:06:15 -05:00
Yan Zheng
b335b0034e Btrfs: Avoid using __GFP_HIGHMEM with slab allocator
btrfs_releasepage may call kmem_cache_alloc indirectly,
and provide same GFP flags it gets to kmem_cache_alloc.
So it's possible to use __GFP_HIGHMEM with the slab
allocator.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-02-12 10:06:04 -05:00
Chris Mason
e1df36d2f1 Btrfs: don't clean old snapshots on sync(1)
Cleaning old snapshots can make sync(1) somewhat slow, and some users
and applications still use it in a global fsync kind of workload.

This patch changes btrfs not to clean old snapshots during sync, which is
safe from a FS consistency point of view.  The major downside is that it
makes it difficult to tell when old snapshots have been reaped and
the space they were using has been reclaimed.  A new ioctl will be added
for this purpose instead.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 09:45:08 -05:00
Chris Mason
536ac8ae86 Btrfs: use larger metadata clusters in ssd mode
Larger metadata clusters can significantly improve writeback performance
on ssd drives with large erasure blocks.  The larger clusters make it
more likely a given IO will completely overwrite the ssd block, so it
doesn't have to do an internal rwm cycle.

On spinning media, lager metadata clusters end up spreading out the
metadata more over time, which makes fsck slower, so we don't want this
to be the default.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 09:41:38 -05:00
Chris Mason
b288052e17 Btrfs: process mount options on mount -o remount,
Btrfs wasn't parsing any new mount options during remount, making it
difficult to set mount options on a root drive.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12 09:37:35 -05:00
Josef Bacik
eb09967089 Btrfs: make sure all pending extent operations are complete
Theres a slight problem with finish_current_insert, if we set all to 1 and then
go through and don't actually skip any of the extents on the pending list, we
could exit right after we've added new extents.

This is a problem because by inserting the new extents we could have gotten new
COW's to happen and such, so we may have some pending updates to do or even
more inserts to do after that.

So this patch will only exit if we have never skipped any of the extents in the
pending list, and we have no extents to insert, this will make sure that all of
the pending work is truly done before we return.  I've been running with this
patch for a few days with all of my other testing and have not seen issues.
Thanks,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-02-12 09:27:38 -05:00
Ingo Molnar
d88316c243 x86, 32-bit: refactor find_low_pfn_range()
Impact: cleanup

Make the max_low_pfn logic a bit more standard between
lowmem_pfn_init() and highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:17 +01:00
Ingo Molnar
4769843bc2 x86, 32-bit: clean up find_low_pfn_range()
Impact: cleanup

Split find_low_pfn_range() into two functions:

 - lowmem_pfn_init()
 - highmem_pfn_init()

The former gets called if all of RAM fits into lowmem,
otherwise we call highmem_pfn_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:16 +01:00
Ingo Molnar
3023533de4 x86: fix warning in find_low_pfn_range()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 15:21:15 +01:00
Catalin Marinas
2d7c11bfc9 [ARM] 5382/1: unwind: Reorganise the stacktrace support
This patch changes the walk_stacktrace and its callers for easier
integration of stack unwinding. The arch/arm/kernel/stacktrace.h file is
also moved to arch/arm/include/asm/stacktrace.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:21:17 +00:00
Catalin Marinas
67a94c23bb [ARM] 5381/1: unwind: Reorganise the traps.c code
This patch moves code around in the arch/arm/kernel/traps.c file for
easier integration of the stack unwinding support.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 13:21:15 +00:00
Ingo Molnar
871cafcc96 Merge branch 'linus' into core/softlockup 2009-02-12 13:08:57 +01:00
Ingo Molnar
bd282422fe x86, defconfig: turn off CONFIG_SCSI_ISCSI_ATTRS=y
It was enabled by mistake - iscsi is not included in a typical
default PC, and no other architecture has it built-in (=y) either.

Turn it off.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 13:06:43 +01:00
Ingo Molnar
556831063b x86, defconfig: turn off CONFIG_ENABLE_WARN_DEPRECATED
deprecation warnings have become rather noisy lately:

drivers/i2c/i2c-core.c: In function ‘i2c_new_device’:
drivers/i2c/i2c-core.c:283: warning: ‘i2c_attach_client’ is deprecated (declared at include/linux/i2c.h:434)
drivers/i2c/i2c-core.c: In function ‘i2c_del_adapter’:
drivers/i2c/i2c-core.c:646: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘i2c_register_driver’:
drivers/i2c/i2c-core.c:713: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: In function ‘__detach_adapter’:
drivers/i2c/i2c-core.c:780: warning: ‘detach_client’ is deprecated (declared at include/linux/i2c.h:154)
drivers/i2c/i2c-core.c: At top level:
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:876: warning: ‘i2c_attach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:827)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)
drivers/i2c/i2c-core.c:904: warning: ‘i2c_detach_client’ is deprecated (declared at drivers/i2c/i2c-core.c:879)

So turn it off for now - these reminders can obscure critical warnings.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-12 12:53:50 +01:00