This patch makes sure that no function required for suspend/resume of
AMD IOMMU driver is thrown away after boot.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Current hardware uses msi instead of msi-x so this code it not necessary
and can not be tested. The best thing is to drop this code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch restructures the AMD IOMMU initialization code to initialize
all hardware registers with one single function call.
This is helpful for suspend/resume support.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch introduces the for_each_iommu and for_each_iommu_safe macros
to simplify the developers life when having to iterate over all AMD
IOMMUs in the system.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Some drivers may use the dma api during ->remove which will
cause a protection domain to get reattached to a device. Delay the
detach until after the driver is completely unbound.
[ joro: added a little merge helper ]
[ Impact: fix too early device<->domain removal ]
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The bug never triggered. But it should be fixed to protect against
broken ACPI tables in the future.
[ Impact: protect against broken ivrs acpi table ]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The devid parameter to set_dev_entry_from_acpi is the requester ID
rather than the device ID since it is used to index the IOMMU device
table. The handling of IVHD_DEV_ALIAS used to pass the device ID.
This patch fixes it to pass the requester ID.
[ Impact: fix setting the wrong req-id in acpi-table parsing ]
Signed-off-by: Neil Turton <nturton@solarflare.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The variable amd_iommu_last_bdf holds the maximum bdf of any device
controlled by an IOMMU, so the number of device entries needed is
amd_iommu_last_bdf+1. The function tbl_size used amd_iommu_last_bdf
instead. This would be a problem if the last device were a large
enough power of 2.
[ Impact: fix amd_iommu_last_bdf off-by-one error ]
Signed-off-by: Neil Turton <nturton@solarflare.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This Kconfig option is intended to enable various code paths or
parameters in IOMMU implementations to stress test the code and/or the
hardware. This can also be done by disabling optimizations in the code
when this option is switched on.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Add information about device memory mapping requirements for the IOMMU
as described in the IVRS ACPI table to the kernel log if amd_iommu_dump
was specified on the kernel command line.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add information about devices belonging to an IOMMU as described in the
IVRS ACPI table to the kernel log if amd_iommu_dump was specified on the
kernel command line.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add information about IOMMU devices described in the IVRS ACPI table to
the kernel log if amd_iommu_dump was specified on the kernel command
line.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This kernel parameter will be useful to get some AMD IOMMU related
information in dmesg that is not necessary for the default user but may
be helpful in debug situations.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
changes since v1: we now check if the parent configuration bit was
changed since reset and change the parent when needed.
csi_clk parent was defined with ahb_clk. However, according to the
m31 reference manual, it should be serial_pll_clk.
Guennadi always used a 20 MHz clock that was by chance changed to
a 45 MHz that fits in the mt9t031 spec. Now the clocks are computed
and output correctly (measured on oscillo).
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current cifs_iget isn't suitable for anything but the root inode.
Rename it with a more appropriate name.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The callers primarily end up converting the args from le anyway. Also,
most of the callers end up needing to add an offset to the result. The
exception to these rules is cnvrtDosCifsTm, but there are no callers of
that function, so we might as well remove it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
...and just have the function call le64_to_cpu.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
McASP on DM646x can operate in DIT (S/PDIF) where no codec is needed.
This patch provides stub codec that can be used in these configurations.
On DM646x EVM the McASP1 is connected to the S/PDIF out.
Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Commit 564c2b21 ("perf_counter: Optimize context switch between
identical inherited contexts") introduced a race where it is possible
that a counter being attached to a task could get attached to the
wrong task, if the task is one that has inherited its context from
another task via fork. This happens because the optimized context
switch could switch the context to another task after find_get_context
has read task->perf_counter_ctxp. In fact, it's possible that the
context could then get freed, if the other task then exits.
This fixes the problem by protecting both the context switch and the
critical code in find_get_context with spinlocks. The context switch
locks the cxt->lock of both the outgoing and incoming contexts before
swapping them. That means that once code such as find_get_context
has obtained the spinlock for the context associated with a task,
the context can't get swapped to another task. However, the context
may have been swapped in the interval between reading
task->perf_counter_ctxp and getting the lock, so it is necessary to
check and retry.
To make sure that none of the contexts being looked at in
find_get_context can get freed, this changes the context freeing code
to use RCU. Thus an rcu_read_lock() is sufficient to ensure that no
contexts can get freed. This part of the patch is lifted from a patch
posted by Peter Zijlstra.
This also adds a check to make sure that we can't add a counter to a
task that is exiting.
There is also a race between perf_counter_exit_task and
find_get_context; this solves the race by moving the get_ctx that
was in perf_counter_alloc into the locked region in find_get_context,
so that once find_get_context has got the context for a task, it
won't get freed even if the task calls perf_counter_exit_task. It
doesn't matter if new top-level (non-inherited) counters get attached
to the context after perf_counter_exit_task has detached the context
from the task. They will just stay there and never get scheduled in
until the counters' fds get closed, and then perf_release will remove
them from the context and eventually free the context.
With this, we are now doing the unclone in find_get_context rather
than when a counter was added to or removed from a context (actually,
we were missing the unclone_ctx() call when adding a counter to a
context). We don't need to unclone when removing a counter from a
context because we have no way to remove a counter from a cloned
context.
This also takes out the smp_wmb() in find_get_context, which Peter
Zijlstra pointed out was unnecessary because the cmpxchg implies a
full barrier anyway.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On MP systems, the data loaded by CPU0 before the SCU was initialised
may not be visible to the other CPUs.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This also includes the following compile fix:
This patch includes 'asm/cacheflush.h' which is needed to use
'flush_cache_all()' function.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The *fence instructions were moved to vsyscall_64.c by commit
cb9e35dce9. But this breaks the
vDSO, because vread methods are also called from there.
Besides, the synchronization might be unnecessary for other
time sources than TSC.
[ Impact: fix potential time warp in VDSO ]
Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
LKML-Reference: <9d0ea9ea0f866bdc1f4d76831221ae117f11ea67.1243241859.git.ptesarik@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Added some missing register bits definitions to reduce magic numbers.
Also renamed some to follow the names on the datasheet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the single_cmd mode, the hardware cannot store the multiple replies
like on RIRB, thus each verb has to sync and wait for the response no
matter whether the return value is needed or not. Otherwise it may
result in a wrong return value from the previous verb.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unsigned variables should use `%u' rather than `%d'.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
DM needs to use blk_stack_limits(), so it needs to be exported.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Implement this style of header:
#
# Overhead Command File: Symbol
# ........ ....... ............
#
for the various --sort variants as well.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pointed out by compiler warnings:
tip/include/linux/perf_counter.h:644: warning: no return statement in function returning non-void
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
First of all, it exposes the SKB list implementation.
Second of all it's not needed. If we get called here, we
successfully enqueued the URB with the linked SKB and
such a completion only gets called one time on such an
SKB.
Signed-off-by: David S. Miller <davem@davemloft.net>
A docking mic control is shown by default. The Compaq Presario
CQ60 laptop has no docking connector, so designate it as a
CXT5051_HP model.
This makes the phantom mixer slider disappear.
Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't need to explicitly initialize to cap_* because
it will be filled by security_fixup_ops().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
