We currently have two related PMD vs PTE races in the DAX code. These
can both be easily triggered by having two threads reading and writing
simultaneously to the same private mapping, with the key being that
private mapping reads can be handled with PMDs but private mapping
writes are always handled with PTEs so that we can COW.
Here is the first race:
CPU 0 CPU 1
(private mapping write)
__handle_mm_fault()
create_huge_pmd() - FALLBACK
handle_pte_fault()
passes check for pmd_devmap()
(private mapping read)
__handle_mm_fault()
create_huge_pmd()
dax_iomap_pmd_fault() inserts PMD
dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD
installed in our page tables at this spot.
Here's the second race:
CPU 0 CPU 1
(private mapping read)
__handle_mm_fault()
passes check for pmd_none()
create_huge_pmd()
dax_iomap_pmd_fault() inserts PMD
(private mapping write)
__handle_mm_fault()
create_huge_pmd() - FALLBACK
(private mapping read)
__handle_mm_fault()
passes check for pmd_none()
create_huge_pmd()
handle_pte_fault()
dax_iomap_pte_fault() inserts PTE
dax_iomap_pmd_fault() inserts PMD,
but we already have a PTE at
this spot.
The core of the issue is that while there is isolation between faults to
the same range in the DAX fault handlers via our DAX entry locking,
there is no isolation between faults in the code in mm/memory.c. This
means for instance that this code in __handle_mm_fault() can run:
if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) {
ret = create_huge_pmd(&vmf);
But by the time we actually get to run the fault handler called by
create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE
fault has installed a normal PMD here as a parent. This is the cause of
the 2nd race. The first race is similar - there is the following check
in handle_pte_fault():
} else {
/* See comment in pte_alloc_one_map() */
if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd))
return 0;
So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we
will bail and retry the fault. This is correct, but there is nothing
preventing the PMD from being installed after this check but before we
actually get to the DAX PTE fault handlers.
In my testing these races result in the following types of errors:
BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1
BUG: non-zero nr_ptes on freeing mm: 15
Fix this issue by having the DAX fault handlers verify that it is safe
to continue their fault after they have taken an entry lock to block
other racing faults.
[ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries]
Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Pawel Lebioda <pawel.lebioda@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pawel Lebioda <pawel.lebioda@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Eryu Guan <eguan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the pmd_devmap() checks were added by 5c7fb56e5e ("mm, dax:
dax-pmd vs thp-pmd vs hugetlbfs-pmd") to add better support for DAX huge
pages, they were all added to the end of if() statements after existing
pmd_trans_huge() checks. So, things like:
- if (pmd_trans_huge(*pmd))
+ if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd))
When further checks were added after pmd_trans_unstable() checks by
commit 7267ec008b ("mm: postpone page table allocation until we have
page to map") they were also added at the end of the conditional:
+ if (pmd_trans_unstable(fe->pmd) || pmd_devmap(*fe->pmd))
This ordering is fine for pmd_trans_huge(), but doesn't work for
pmd_trans_unstable(). This is because DAX huge pages trip the bad_pmd()
check inside of pmd_none_or_trans_huge_or_clear_bad() (called by
pmd_trans_unstable()), which prints out a warning and returns 1. So, we
do end up doing the right thing, but only after spamming dmesg with
suspicious looking messages:
mm/pgtable-generic.c:39: bad pmd ffff8808daa49b88(84000001006000a5)
Reorder these checks in a helper so that pmd_devmap() is checked first,
avoiding the error messages, and add a comment explaining why the
ordering is important.
Fixes: commit 7267ec008b ("mm: postpone page table allocation until we have page to map")
Link: http://lkml.kernel.org/r/20170522215749.23516-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Pawel Lebioda <pawel.lebioda@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Eryu Guan <eguan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin has reported that the OOM killer can trivially selects
next OOM victim when a thread doing memory allocation from page fault
path was selected as first OOM victim.
allocate invoked oom-killer: gfp_mask=0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null), order=0, oom_score_adj=0
allocate cpuset=/ mems_allowed=0
CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
oom_kill_process+0x219/0x3e0
out_of_memory+0x11d/0x480
__alloc_pages_slowpath+0xc84/0xd40
__alloc_pages_nodemask+0x245/0x260
alloc_pages_vma+0xa2/0x270
__handle_mm_fault+0xca9/0x10c0
handle_mm_fault+0xf3/0x210
__do_page_fault+0x240/0x4e0
trace_do_page_fault+0x37/0xe0
do_async_page_fault+0x19/0x70
async_page_fault+0x28/0x30
...
Out of memory: Kill process 492 (allocate) score 899 or sacrifice child
Killed process 492 (allocate) total-vm:2052368kB, anon-rss:1894576kB, file-rss:4kB, shmem-rss:0kB
allocate: page allocation failure: order:0, mode:0x14280ca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO), nodemask=(null)
allocate cpuset=/ mems_allowed=0
CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
__alloc_pages_slowpath+0xd32/0xd40
__alloc_pages_nodemask+0x245/0x260
alloc_pages_vma+0xa2/0x270
__handle_mm_fault+0xca9/0x10c0
handle_mm_fault+0xf3/0x210
__do_page_fault+0x240/0x4e0
trace_do_page_fault+0x37/0xe0
do_async_page_fault+0x19/0x70
async_page_fault+0x28/0x30
...
oom_reaper: reaped process 492 (allocate), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
...
allocate invoked oom-killer: gfp_mask=0x0(), nodemask=(null), order=0, oom_score_adj=0
allocate cpuset=/ mems_allowed=0
CPU: 1 PID: 492 Comm: allocate Not tainted 4.12.0-rc1-mm1+ #181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
oom_kill_process+0x219/0x3e0
out_of_memory+0x11d/0x480
pagefault_out_of_memory+0x68/0x80
mm_fault_error+0x8f/0x190
? handle_mm_fault+0xf3/0x210
__do_page_fault+0x4b2/0x4e0
trace_do_page_fault+0x37/0xe0
do_async_page_fault+0x19/0x70
async_page_fault+0x28/0x30
...
Out of memory: Kill process 233 (firewalld) score 10 or sacrifice child
Killed process 233 (firewalld) total-vm:246076kB, anon-rss:20956kB, file-rss:0kB, shmem-rss:0kB
There is a race window that the OOM reaper completes reclaiming the
first victim's memory while nothing but mutex_trylock() prevents the
first victim from calling out_of_memory() from pagefault_out_of_memory()
after memory allocation for page fault path failed due to being selected
as an OOM victim.
This is a side effect of commit 9a67f6488e ("mm: consolidate
GFP_NOFAIL checks in the allocator slowpath") because that commit
silently changed the behavior from
/* Avoid allocations with no watermarks from looping endlessly */
to
/*
* Give up allocations without trying memory reserves if selected
* as an OOM victim
*/
in __alloc_pages_slowpath() by moving the location to check TIF_MEMDIE
flag. I have noticed this change but I didn't post a patch because I
thought it is an acceptable change other than noise by warn_alloc()
because !__GFP_NOFAIL allocations are allowed to fail. But we
overlooked that failing memory allocation from page fault path makes
difference due to the race window explained above.
While it might be possible to add a check to pagefault_out_of_memory()
that prevents the first victim from calling out_of_memory() or remove
out_of_memory() from pagefault_out_of_memory(), changing
pagefault_out_of_memory() does not suppress noise by warn_alloc() when
allocating thread was selected as an OOM victim. There is little point
with printing similar backtraces and memory information from both
out_of_memory() and warn_alloc().
Instead, if we guarantee that current thread can try allocations with no
watermarks once when current thread looping inside
__alloc_pages_slowpath() was selected as an OOM victim, we can follow "who
can use memory reserves" rules and suppress noise by warn_alloc() and
prevent memory allocations from page fault path from calling
pagefault_out_of_memory().
If we take the comment literally, this patch would do
- if (test_thread_flag(TIF_MEMDIE))
- goto nopage;
+ if (alloc_flags == ALLOC_NO_WATERMARKS || (gfp_mask & __GFP_NOMEMALLOC))
+ goto nopage;
because gfp_pfmemalloc_allowed() returns false if __GFP_NOMEMALLOC is
given. But if I recall correctly (I couldn't find the message), the
condition is meant to apply to only OOM victims despite the comment.
Therefore, this patch preserves TIF_MEMDIE check.
Fixes: 9a67f6488e ("mm: consolidate GFP_NOFAIL checks in the allocator slowpath")
Link: http://lkml.kernel.org/r/201705192112.IAF69238.OQOHSJLFOFFMtV@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Roman Gushchin <guro@fb.com>
Tested-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.11]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5b5e0928f7 ("lib/vsprintf.c: remove %Z support") removed some
usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a
-Wformat-extra-args warning because it does not know about %Z.
Replace %Z with %z.
Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org> [4.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg_propagate_slab_attrs() abuses the sysfs attribute file functions
to propagate settings from the root kmem_cache to a newly created
kmem_cache. It does that with:
attr->show(root, buf);
attr->store(new, buf, strlen(bug);
Aside of being a lazy and absurd hackery this is broken because it does
not check the return value of the show() function.
Some of the show() functions return 0 w/o touching the buffer. That
means in such a case the store function is called with the stale content
of the previous show(). That causes nonsense like invoking
kmem_cache_shrink() on a newly created kmem_cache. In the worst case it
would cause handing in an uninitialized buffer.
This should be rewritten proper by adding a propagate() callback to
those slub_attributes which must be propagated and avoid that insane
conversion to and from ASCII, but that's too large for a hot fix.
Check at least the return value of the show() function, so calling
store() with stale content is prevented.
Steven said:
"It can cause a deadlock with get_online_cpus() that has been uncovered
by recent cpu hotplug and lockdep changes that Thomas and Peter have
been doing.
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpu_hotplug.lock);
lock(slab_mutex);
lock(cpu_hotplug.lock);
lock(slab_mutex);
*** DEADLOCK ***"
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit db2aa7fd15 ("initramfs: allow again choice of the embedded
initram compression algorithm") introduced the possibility to select the
initramfs compression algorithm from Kconfig and while this is a nice
feature it broke the use case described below.
Here is what my build system does:
- kernel is initially configured not to have an initramfs included
- build the user space root file system
- re-configure the kernel to have an initramfs included
(CONFIG_INITRAMFS_SOURCE="/path/to/romfs") and set relevant
CONFIG_INITRAMFS options, in my case, no compression option
(CONFIG_INITRAMFS_COMPRESSION_NONE)
- kernel is re-built with these options -> kernel+initramfs image is
copied
- kernel is re-built again without these options -> kernel image is
copied
Building a kernel without an initramfs means setting this option:
CONFIG_INITRAMFS_SOURCE="" (and this one only)
whereas building a kernel with an initramfs means setting these options:
CONFIG_INITRAMFS_SOURCE="/home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev"
CONFIG_INITRAMFS_ROOT_UID=1000
CONFIG_INITRAMFS_ROOT_GID=1000
CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_INITRAMFS_COMPRESSION=""
Commit db2aa7fd15 ("initramfs: allow again choice of the embedded
initram compression algorithm") is problematic because
CONFIG_INITRAMFS_COMPRESSION which is used to determine the
initramfs_data.cpio extension/compression is a string, and due to how
Kconfig works it will evaluate in order, how to assign it.
Setting CONFIG_INITRAMFS_COMPRESSION_NONE with CONFIG_INITRAMFS_SOURCE=""
cannot possibly work (because of the depends on INITRAMFS_SOURCE!=""
imposed on CONFIG_INITRAMFS_COMPRESSION ) yet we still get
CONFIG_INITRAMFS_COMPRESSION assigned to ".gz" because CONFIG_RD_GZIP=y
is set in my kernel, even when there is no initramfs being built.
So we basically end-up generating two initramfs_data.cpio* files, one
without extension, and one with .gz. This causes usr/Makefile to track
usr/initramfs_data.cpio.gz, and not usr/initramfs_data.cpio anymore,
that is also largely problematic after 9e3596b0c6 ("kbuild:
initramfs cleanup, set target from Kconfig") because we used to track
all possible initramfs_data files in the $(targets) variable before that
commit.
The end result is that the kernel with an initramfs clearly does not
contain what we expect it to, it has a stale initramfs_data.cpio file
built into it, and we keep re-generating an initramfs_data.cpio.gz file
which is not the one that we want to include in the kernel image proper.
The fix consists in hiding CONFIG_INITRAMFS_COMPRESSION when
CONFIG_INITRAMFS_SOURCE="". This puts us back in a state to the
pre-4.10 behavior where we can properly disable and re-enable initramfs
within the same kernel .config file, and be in control of what
CONFIG_INITRAMFS_COMPRESSION is set to.
Fixes: db2aa7fd15 ("initramfs: allow again choice of the embedded initram compression algorithm")
Fixes: 9e3596b0c6 ("kbuild: initramfs cleanup, set target from Kconfig")
Link: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Cc: P J P <ppandit@redhat.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While converting drm_[cm]alloc* helpers to kvmalloc* variants Chris
Wilson has wondered why we want to try kmalloc before vmalloc fallback
even for larger allocations requests. Let's clarify that one larger
physically contiguous block is less likely to fragment memory than many
scattered pages which can prevent more large blocks from being created.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170517080932.21423-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7c30f352c8 ("jiffies.h: declare jiffies and jiffies_64 with
____cacheline_aligned_in_smp") removed a section specification from the
jiffies declaration that caused conflicts on some platforms.
Unfortunately this change broke the build for frv:
kernel/built-in.o: In function `__do_softirq': (.text+0x6460): relocation truncated to fit: R_FRV_GPREL12 against symbol
`jiffies' defined in *ABS* section in .tmp_vmlinux1
kernel/built-in.o: In function `__do_softirq': (.text+0x6574): relocation truncated to fit: R_FRV_GPREL12 against symbol
`jiffies' defined in *ABS* section in .tmp_vmlinux1
kernel/built-in.o: In function `pwq_activate_delayed_work': workqueue.c:(.text+0x15b9c): relocation truncated to fit: R_FRV_GPREL12 against
symbol `jiffies' defined in *ABS* section in .tmp_vmlinux1
...
Add __jiffy_arch_data to the declaration of jiffies and use it on frv to
include the section specification. For all other platforms
__jiffy_arch_data (currently) has no effect.
Fixes: 7c30f352c8 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Link: http://lkml.kernel.org/r/20170516221333.177280-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Igor Stoppa has noticed that __GFP_NOLOCKDEP can use a lower bit. At
the time commit 7e7844226f ("lockdep: allow to disable reclaim lockup
detection") was written we still had __GFP_OTHER_NODE but I have removed
it in commit 41b6167e8f ("mm: get rid of __GFP_OTHER_NODE") and forgot
to lower the bit value.
The current value is outside of __GFP_BITS_SHIFT so it cannot be used
actually.
Fixes: 7e7844226f ("lockdep: allow to disable reclaim lockup detection")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Igor Stoppa <igor.stoppa@nokia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"err" needs to be left set to -EFAULT if split_huge_page succeeds.
Otherwise if "err" gets clobbered with zero and write_protect_page
fails, try_to_merge_one_page() will succeed instead of returning -EFAULT
and then try_to_merge_with_ksm_page() will continue thinking kpage is a
PageKsm when in fact it's still an anonymous page. Eventually it'll
crash in page_add_anon_rmap.
This has been reproduced on Fedora25 kernel but I can reproduce with
upstream too.
The bug was introduced in commit f765f54059 ("ksm: prepare to new THP
semantics") introduced in v4.5.
page:fffff67546ce1cc0 count:4 mapcount:2 mapping:ffffa094551e36e1 index:0x7f0f46673
flags: 0x2ffffc0004007c(referenced|uptodate|dirty|lru|active|swapbacked)
page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
page->mem_cgroup:ffffa09674bf0000
------------[ cut here ]------------
kernel BUG at mm/rmap.c:1222!
CPU: 1 PID: 76 Comm: ksmd Not tainted 4.9.3-200.fc25.x86_64 #1
RIP: do_page_add_anon_rmap+0x1c4/0x240
Call Trace:
page_add_anon_rmap+0x18/0x20
try_to_merge_with_ksm_page+0x50b/0x780
ksm_scan_thread+0x1211/0x1410
? prepare_to_wait_event+0x100/0x100
? try_to_merge_with_ksm_page+0x780/0x780
kthread+0xd9/0xf0
? kthread_park+0x60/0x60
ret_from_fork+0x25/0x30
Fixes: f765f54059 ("ksm: prepare to new THP semantics")
Link: http://lkml.kernel.org/r/20170513131040.21732-1-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Federico Simoncelli <fsimonce@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-cpufreq:
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
Panel Power sequences for CNP is similar to Broxton,
but with only one sequencer.
Main difference from SPT is that PP_DIVISOR was removed
and power cycle delay has been moved to PP_CONTROL.
v2: Add missed pp_div write, that is now part of PP_CONTROL[8:4]
as on Broxton. (Found by DK)
v3: Improve commit message. (By DK)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-6-git-send-email-rodrigo.vivi@intel.com
On CNP PCH based platforms the gmbus is on the south display that
is on PCH. The existing implementation for previous platforms
already covers the need for CNP expect for the pin pair configuration
that follows similar definitions that we had on BXT.
v2: Don't drop "_BXT" as the indicator of the first platform
supporting this pin numbers. Suggested by Daniel.
v3: Add missing else and fix register table since CNP GPIO_CTL
starts on 0xC5014.
v4: Fix pin number and map according to the current available VBT.
Re-add pin 4 for port D. Lost during some rebase.
v5: Use table as spec. If VBT is wrong it should be ignored.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-5-git-send-email-rodrigo.vivi@intel.com
Split out BXT and CNP's setup_backlight(),enable_backlight(),
disable_backlight() and hz_to_pwm() into
two separate functions instead of reusing BXT function.
Reuse set_backlight() and get_backlight() since they have
no reference to the utility pin.
v2: Reuse BXT functions with controller 0 instead of
redefining it. (Jani).
Use dev_priv->rawclk_freq instead of getting the value
from SFUSE_STRAP.
v3: Avoid setup backligh controller along with hooks and
fully reuse hooks setup as suggested by Jani.
v4: Clean up commit message.
v5: Implement per PCH instead per platform.
v6: Introduce a new function for CNP.(Jani and Ville)
v7: Squash the all CNP Backlight support patches into a
single patch. (Jani)
v8: Correct indentation, remove unneeded blank lines and
correct mail address (Jani).
v9: Remove unused enum pipe. (by CI)
v10: Remove comment mentioning SFUSE_STRAP in a part of
the code that we don't use it. (Jani)
Make controller = 0 since current CNP has only one
controller and put a comment mentioning why we
reuse the BXT definitions and are keeping the
controller = 0. (DK)
v11: Remove spurious line. (DK)
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Ville Syrjala <ville.syrjala@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-4-git-send-email-rodrigo.vivi@intel.com
RAWCLK_FREQ register has changed for platforms with CNP+.
[29:26] This field provides the denominator for the fractional
part of the microsecond counter divider. The numerator
is fixed at 1. Program this field to the denominator of
the fractional portion of reference frequency minus one.
If the fraction is 0, program to 0.
0100b = Fraction .2 MHz = Fraction 1/5.
0000b = Fraction .0 MHz.
[25:16] This field provides the integer part of the microsecond
counter divider. Program this field to the integer portion
of the reference frequenct minus one.
Also this register tells us that proper raw clock should be read
from SFUSE_STRAP and programmed to this register. Up to this point
on other platforms we are reading instead of programming it so
probably relying on whatever BIOS had configured here.
Now on let's follow the spec and also program this register
fetching the right value from SFUSE_STRAP as Spec tells us to do.
v2: Read from SFUSE_STRAP and Program RAWCLK_FREQ instead of
reading the value relying someone else will program that
for us.
v3: Add missing else. (Jani)
v4: Addressing all Ville's catches:
Use macro for shift bits instead of defining shift.
Remove shift from the cleaning bits with mask that already
has it.
Add missing I915_WRITE to actually write the reg.
Stop using useless DIV_ROUND_* on divider that is exact
dividion and use DIV_ROUND_CLOSEST for the fraction part.
v5: Remove useless Read-Modify-Write on raclk_freq reg. (Ville).
v6: Change is per PCH instead of per platform.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-3-git-send-email-rodrigo.vivi@intel.com
Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with
an error code just print a debug message.
NAKs and timeouts can occur in this situation normally, so do not treat
them as errors.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The first two bytes of PCI ID for CNP_LP PCH are the same as that of
SPT_LP. We should really be looking at the first 9 bits instead of the
first 8 to identify platforms, although this seems to have not caused any
problems on earlier platforms. Introduce a 9 bit extended mask for SPT and
CNP while not touching the code for any of the other platforms.
v2: (Rodrigo) Make platform agnostic and fix commit message.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-2-git-send-email-rodrigo.vivi@intel.com
Most of south engine display that is in PCH is still the
same as SPT and KBP, except for this key differences:
- Backlight: Backlight programming changed in CNP PCH.
- Panel Power: Sligh programming changed in CNP PCH.
- GMBUS and GPIO: The pin mapping has changed in CNP PCH.
All of these changes follow more the BXT style.
v2: Update definition to use dev_priv isntead of dev (Tvrtko).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-1-git-send-email-rodrigo.vivi@intel.com
After removal of platform_data support, we can simplify OF handling.
of_match_device() evaluates to NULL if !CONFIG_OF or if there is no node
pointer for that device, so we can remove the check for the node ptr.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
No platform currently upstream makes use of this platform_data anymore.
The ones that did are converted to DT meanwhile. So, remove it. The old
platforms likely don't have the 'clks_per_cnt' feature, otherwise it
would have been implemented by now. And in the unlikely case they need
to setup a different bus speed, we should rather go for a generic i2c
platform data just for that.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Instead of hard coding "i2c-stub:", let's use the pr_fmt mechanism to
achieve the same more easily. This makes it easier to stay consistent
when adding new messages. Also, remove an unneeded OOM message while we
are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch adds ACPI support by using PCC mailbox communication
interface.
Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch refactors the code to use a single message function to
send command message.
Signed-off-by: Hoan Tran <hotran@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Failing to do so meant that we got a resume() callback on first use of
the device, so we would leak the bin BO that we allocated during
probe.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 553c942f8b ("drm/vc4: Allow using more than 256MB of CMA memory.")
Link: http://patchwork.freedesktop.org/patch/msgid/20170515171615.10168-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
- Fix an unmount hang due to a race in io buffer accounting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wRbJ
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fix from Darrick Wong:
"I've one more bugfix for you for 4.12-rc4: Fix an unmount hang due to
a race in io buffer accounting"
* tag 'xfs-4.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use ->b_state to fix buffer I/O accounting release race
introduced in -rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJZMYN+AAoJEEp/3jgCEfOL6u0H/Rp2NdbW4QPoJWZmvL0vD77B
4N3Y+QCG7CSG3TBHWFlIUL7MsHY2wS/3D6rcIPlLhXVb3PV+IhBw5Aqu/OwzF1j6
YuEAoJZWAS4nP3eTDVz1eFSJnk/M4jrIqgPFFdKdh+pumxTnEwl6vXeKD8SSX4xx
2mlxf+EavqeNYppTyBdIWYlVjF03klWPp42G0CRpvjficO+5tvkP4cOrI8cRkgoK
fYFZDTp7Zz0Y1+FQfxntfRtFgksvNplvdnenDnjsPxty+YPUGETpRfo72R8DMU8n
A16g9hkHZNL3CQWcKwkwQmHX/IJxpKzC0xNMNaZO+8dJqAWOdB9h9FS+roAO1p0=
=WpjE
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.12-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A small fix for rbd FALLOC_FL_ZERO_RANGE/PUNCH_HOLE handling breakage
introduced in -rc1"
* tag 'ceph-for-4.12-rc4' of git://github.com/ceph/ceph-client:
rbd: implement REQ_OP_WRITE_ZEROES
If logout response is not received and ->ep_disconnect() is called then
close tcp conn by RST instead of FIN to cleanup conn resources
immediately.
Also move ->csk_push_tx_frames() above 'done:' to avoid calling
->csk_push_tx_frames() in error cases.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- a fix to DM to account for the possibility that PREFLUSH or FUA are
used without the SYNC flag if the underlying storage doesn't have a
volatile write-cache
- a DM ioctl memory allocation flag fix to use __GFP_HIGH to allow
emergency forward progress (by using memory reserves as last resort)
- a small DM integrity cleanup to use kvmalloc() instead of duplicating
the same
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZMZqnAAoJEMUj8QotnQNaB3UIAKDWS1bAAuPR6iiIdlffmZzf
DxbCkpgCIHcmuihNKm+57P+Vwa7a5OFb7LSZhU7p2ormncrzEmLRP4D5twtyxTNt
f1zT85gB3FXZVRDbcOP7yx2JuZdimu41kYBc9PaQuyTaNUl8lisnQhTVuJ9m0VO3
jdgQpSD0jQPhSFd/rA4hi75l2MeKwOJA2cXsfBgSxIW+rflYFi7SoNfG7wQattpU
ArdDEgU++lRuk9FaGVHOIgTduhutk8NtRQFmxXZlE10KEf05SbBLVr1EGgKLVnyC
72+NI8OKeqic9R4phyWNZhErWnteXy9bbQtvBOpEIs8byFY176byzBkGBXjHebE=
=MLRg
-----END PGP SIGNATURE-----
Merge tag 'for-4.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a DM verity fix for a mode when no salt is used
- a fix to DM to account for the possibility that PREFLUSH or FUA are
used without the SYNC flag if the underlying storage doesn't have a
volatile write-cache
- a DM ioctl memory allocation flag fix to use __GFP_HIGH to allow
emergency forward progress (by using memory reserves as last resort)
- a small DM integrity cleanup to use kvmalloc() instead of duplicating
the same
* tag 'for-4.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: make flush bios explicitly sync
dm ioctl: restore __GFP_HIGH in copy_params()
dm integrity: use kvmalloc() instead of dm_integrity_kvmalloc()
dm verity: fix no salt use case
Pull MD fixes from Shaohua Li:
"Several patches for MD. One notable is making flush bios sync, others
fix small issues"
* tag 'md/4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md: Make flush bios explicitely sync
md: report sector of stripes with check mismatches
md: uuid debug statement now in processor byte order.
md-cluster: fix potential lock issue in add_new_disk
Pull block fixes from Jens Axboe:
"A set of fixes that should go into the next -rc. This contains:
- A use-after-free in the request_list exit for the legacy IO path,
from Bart.
- A fix for CFQ, fixing a recent regression with the conversion to
higher resolution timing for iops mode. From Hou Tao.
- A single fix for nbd, split in two patches, fixing a leak of a data
structure.
- A regression fix from Keith, ensuring that callers of
blk_mq_update_nr_hw_queues() hold the right lock"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: Avoid that blk_exit_rl() triggers a use-after-free
cfq-iosched: fix the delay of cfq_group's vdisktime under iops mode
blk-mq: Take tagset lock when updating hw queues
nbd: don't leak nbd_config
nbd: nbd_reset() call in nbd_dev_add() is redundant
-----BEGIN PGP SIGNATURE-----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=RiLR
-----END PGP SIGNATURE-----
Merge tag 'drm-dp-quirk-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm displayport quirk support:
"DP quirk for usb c dongles.
As mentioned I have a separate request for fixing a regression, but
also keeping the broken hw working, for certain USB-C DP adapters they
require a minimised n/m parameters, but an attempt to do this
generically has failed, we need to quirk these specific adapters.
However doing it generically regressed some eDP panels.
This pull adds the infrastructure and a quirk for the adapter"
* tag 'drm-dp-quirk-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
commit d85b758f72 ("virtio_net: fix support for small rings")
was supposed to increase the buffer size for small rings but had an
unintentional side effect of decreasing it for large rings. This seems
to break some setups - it's not yet clear why, but increasing buffer
size back to what it was before helps.
Fixes: d85b758f72 ("virtio_net: fix support for small rings")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qlogic's 82xx series adapter doesn't support
tunnel offloads, driver incorrectly assumes that it is
supported and causes firmware hang while running tunnel IO.
This patch fixes this by not advertising tunnel offloads
for 82xx adapters.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a vxlan interface to a socket isn't symmetrical, while adding
is done in vxlan_open() the deletion is done in vxlan_dellink().
This can cause a use-after-free error when we close the vxlan
interface before deleting it.
We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call
it from vxlan_stop() to match the call from vxlan_open().
Fixes: 56ef9c909b ("vxlan: Move socket initialization to within rtnl scope")
Acked-by: Jiri Benc <jbenc@redhat.com>
Tested-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__pskb_trim_head() does not need to reset skb tail pointer.
Also change the comments, __pskb_pull_head() does not exist.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original author left the project and so far has not
responded to emails sent to the listed address.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently loading a cgroup skb eBPF program require a CAP_SYS_ADMIN
capability while attaching the program to a cgroup only requires the
user have CAP_NET_ADMIN privilege. We can escape the capability
check when load the program just like socket filter program to make
the capability requirement consistent.
Change since v1:
Change the code style in order to be compliant with checkpatch.pl
preference
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows cgroup eBPF program to classify packet based on their
protocol or other detail information. Currently program need
CAP_NET_ADMIN privilege to attach a cgroup eBPF program, and A
process with CAP_NET_ADMIN can already see all packets on the system,
for example, by creating an iptables rules that causes the packet to
be passed to userspace via NFLOG.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
use of_mdio_parse_addr() in place of an OF read of reg and a bounds
check (which is litterally the exact same thing that
of_mdio_parse_addr() does)
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix NETDEV WATCHDOG timeout on startup by adding missing register
writes that properly setup SGMII.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a data packet is retransmitted, we do not compute an
RTT sample for congestion control due to Kern's check. Therefore the
congestion control that uses RTT signals may not receive any update
during loss recovery which could last many round trips. For example,
BBR and Vegas may not be able to update its min RTT estimation if the
network path has shortened until it recovers from losses. This patch
mitigates that by using TCP timestamp options for RTT measurement
for congestion control. Note that we already use timestamps for
RTT estimation.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the sender switches its congestion control during loss
recovery, if the recovery is spurious then it may incorrectly
revert cwnd and ssthresh to the older values set by a previous
congestion control. Consider a congestion control (like BBR)
that does not use ssthresh and keeps it infinite: the connection
may incorrectly revert cwnd to an infinite value when switching
from BBR to another congestion control.
This patch fixes it by disallowing such cwnd undo operation
upon switching congestion control. Note that undo_marker
is not reset s.t. the packets that were incorrectly marked
lost would be corrected. We only avoid undoing the cwnd in
tcp_undo_cwnd_reduction().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set initialization state variable to (reflect interrupt initialization) at
correct time (immediately after having configured interrupts). This fixes
problem of inconsistent IRQ allocation in case of [obscure] failure when
negotiating with PF driver during init.
Clean-up of interrupt enablement during initialization & avoid potential
race condition with chip-specific code (i.e. perform interrupt control in
main driver module). Added explanatory comments regarding interrupt
enablement.
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
take care of UpDbgLaRdPtr[0-3] restriction for T6.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take uld mutex to avoid race between cxgb_up() and
cxgb4_register_uld() to enable napi for the same uld
queue.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
