To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in pas_cpufreq_cpu_exit() to handle the extra
states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170516184735.620023128@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
get_nid_for_pfn() checks for system_state == BOOTING to decide whether to
use early_pfn_to_nid() when CONFIG_DEFERRED_STRUCT_PAGE_INIT=y.
That check is dubious, because the switch to state RUNNING happes way after
page_alloc_init_late() has been invoked.
Change the check to less than RUNNING state so it covers the new
intermediate states as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184735.528279534@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Make the decision whether a pci root is hotplugged depend on SYSTEM_RUNNING
instead of !SYSTEM_BOOTING. It makes no sense to cover states greater than
SYSTEM_RUNNING as there are not hotplug events on reboot and poweroff.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/20170516184735.446455652@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in smp_generic_cpu_bootable() to handle the
extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170516184735.359536998@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in stop_this_cpu() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184735.283420315@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in announce_cpu() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184735.191715856@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in smp_send_stop() to handle the extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20170516184735.112589728@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in ipi_cpu_stop() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170516184735.020718977@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the boot code in init_kernel_freeable() which runs before SMP
bringup assumes (rightfully) that it runs on the boot CPU and therefore can
use smp_processor_id() in preemptible context.
That works so far because the smp_processor_id() check starts to be
effective after smp bringup. That's just wrong. Starting with SMP bringup
and the ability to move threads around, smp_processor_id() in preemptible
context is broken.
Aside of that it does not make sense to allow init to run on all CPUs
before sched_smp_init() has been run.
Pin the init to the boot CPU so the existing code can continue to use
smp_processor_id() without triggering the checks when the enabling of those
checks starts earlier.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170516184734.943149935@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A customer has reported a soft-lockup when running an intensive
memory stress test, where the trace on multiple CPU's looks like this:
RIP: 0010:[<ffffffff810c53fe>]
[<ffffffff810c53fe>] native_queued_spin_lock_slowpath+0x10e/0x190
...
Call Trace:
[<ffffffff81182d07>] queued_spin_lock_slowpath+0x7/0xa
[<ffffffff811bc331>] change_protection_range+0x3b1/0x930
[<ffffffff811d4be8>] change_prot_numa+0x18/0x30
[<ffffffff810adefe>] task_numa_work+0x1fe/0x310
[<ffffffff81098322>] task_work_run+0x72/0x90
Further investigation showed that the lock contention here is pmd_lock().
The task_numa_work() function makes sure that only one thread is let to perform
the work in a single scan period (via cmpxchg), but if there's a thread with
mmap_sem locked for writing for several periods, multiple threads in
task_numa_work() can build up a convoy waiting for mmap_sem for read and then
all get unblocked at once.
This patch changes the down_read() to the trylock version, which prevents the
build up. For a workload experiencing mmap_sem contention, it's probably better
to postpone the NUMA balancing work anyway. This seems to have fixed the soft
lockups involving pmd_lock(), which is in line with the convoy theory.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170515131316.21909-1-vbabka@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With CONFIG_RT_GROUP_SCHED=y, do_sched_rt_period_timer() sequentially
takes each CPU's rq->lock. On a large, busy system, the cumulative time it
takes to acquire each lock can be excessive, even triggering a watchdog
timeout.
If rt_rq->rt_time and rt_rq->rt_nr_running are both zero, this function does
nothing while holding the lock, so don't bother taking it at all.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a767637b-df85-912f-ba69-c90ee00a3fb6@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When priority inheritance was added back in 2.6.18 to sched_setscheduler(), it
added a path to taking an rt-mutex wait_lock, which is not IRQ safe. As PI
is not a common occurrence, lockdep will likely never trigger if
sched_setscheduler was called from interrupt context. A BUG_ON() was added
to trigger if __sched_setscheduler() was ever called from interrupt context
because there was a possibility to take the wait_lock.
Today the wait_lock is irq safe, but the path to taking it in
sched_setscheduler() is the same as the path to taking it from normal
context. The wait_lock is taken with raw_spin_lock_irq() and released with
raw_spin_unlock_irq() which will indiscriminately enable interrupts,
which would be bad in interrupt context.
The problem is that normalize_rt_tasks, which is called by triggering the
sysrq nice-all-RT-tasks was changed to call __sched_setscheduler(), and this
is done from interrupt context!
Now __sched_setscheduler() takes a "pi" parameter that is used to know if
the priority inheritance should be called or not. As the BUG_ON() only cares
about calling the PI code, it should only bug if called from interrupt
context with the "pi" parameter set to true.
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dbc7f069b9 ("sched: Use replace normalize_task() with __sched_setscheduler()")
Link: http://lkml.kernel.org/r/20170308124654.10e598f2@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pick_next_pushable_dl_task(rq) has BUG_ON(rq->cpu != task_cpu(task))
when it returns a task other than NULL, which means that task_cpu(task)
must be rq->cpu. So if task == next_task, then task_cpu(next_task) must
be rq->cpu as well. Remove the redundant condition and make the code simpler.
This way one unnecessary branch and two LOAD operations can be avoided.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494551159-22367-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pick_next_pushable_task(rq) has BUG_ON(rq_cpu != task_cpu(task)) when
it returns a task other than NULL, which means that task_cpu(task) must
be rq->cpu. So if task == next_task, then task_cpu(next_task) must be
rq->cpu as well. Remove the redundant condition and make the code simpler.
This way one unnecessary branch and two LOAD operations can be avoided.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494551143-22219-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we've added llist_for_each_entry_safe(), use it to simplify
an open coded version of it in sched_ttwu_pending().
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494549584-11730-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sometimes we have to dereference next field of llist node before entering
loop becasue the node might be deleted or the next field might be
modified within the loop. So this adds the safe version of llist_for_each(),
that is, llist_for_each_safe().
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Cc: <kernel-team@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1494549416-10539-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpumasks in smp_call_function_many() are private and not subject
to concurrency, atomic bitops are pointless and expensive.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Inter-Processor-Interrupt(IPI) is needed when a page is unmapped and the
process' mm_cpumask() shows the process has ever run on other CPUs. page
migration, page reclaim all need IPIs. The number of IPI needed to send
to different CPUs is especially large for multi-threaded workload since
mm_cpumask() is per process.
For smp_call_function_many(), whenever a CPU queues a CSD to a target
CPU, it will send an IPI to let the target CPU to handle the work.
This isn't necessary - we need only send IPI when queueing a CSD
to an empty call_single_queue.
The reason:
flush_smp_call_function_queue() that is called upon a CPU receiving an
IPI will empty the queue and then handle all of the CSDs there. So if
the target CPU's call_single_queue is not empty, we know that:
i. An IPI for the target CPU has already been sent by 'previous queuers';
ii. flush_smp_call_function_queue() hasn't emptied that CPU's queue yet.
Thus, it's safe for us to just queue our CSD there without sending an
addtional IPI. And for the 'previous queuers', we can limit it to the
first queuer.
To demonstrate the effect of this patch, a multi-thread workload that
spawns 80 threads to equally consume 100G memory is used. This is tested
on a 2 node broadwell-EP which has 44cores/88threads and 32G memory. So
after 32G memory is used up, page reclaiming starts to happen a lot.
With this patch, IPI number dropped 88% and throughput increased about
15% for the above workload.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170519075331.GE2084@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comment does not match the driver, which actually supports
automatic assignment. Fix this by updating the comment.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver supports using mcp23xxx as interrupt controller, so
let's drop all comments stating otherwise.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This moves irq property handling from spi/i2c specific code into
the generic mcp23s08_probe_one. This is possible because the
device properties are named equally.
As a side-effect this drops support for setting the properties via
pdata, which has no mainline users. If boardcode wants to enable
the chip as interrupt controller it can attach the device properties
instead.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We don't set an error code here which means that perf_event_alloc()
returns ERR_PTR(0) (in other words NULL). The callers are not expecting
that and would Oops.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 375637bc52 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/20170522090418.hvs6icgpdo53wkn5@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_init_event() can't return NULL. If it did, the error handling is
incomplete and we would crash. I have removed this confusing dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170522090348.5g7yyld5en3yeky4@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the SMIs are visible to all performance counters, because
many users want to measure everything including SMIs. But in some
cases, the SMI cycles should not be counted - for example, to calculate
the cost of an SMI itself. So a knob is needed.
When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance
counters will be effected. There is no way to do per-counter freeze
on SMI. So it should not use the per-event interface (e.g. ioctl or
event attribute) to set FREEZE_WHILE_SMM bit.
Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM
bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages
while in SMM.
Value has to be 0 or 1. It will be applied to all processors.
Also serialize the entire setting so we don't get multiple concurrent
threads trying to update to different values.
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: bp@alien8.de
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplify spi pdata handling, so that it uses pdata when available
and falls back to reading device properties otherwise.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simplify i2c pdata handling, so that it uses pdata when available
and falls back to reading device properties otherwise.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switching to devm_gpiochip_add_data simplifies the driver's
cleanup routine and safes a few loc.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Let's remove a few lines of code by using managed memory for mcp
variable.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
i2c-core and spi-core already assign the irq, so we
can drop the additional call from the mcp driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver compiles & works perfectly fine without OF_GPIO on x86,
so lets drop the dependency.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Instead of using custom caching, this switches to regmap based
caching. Before the conversion the debugfs file used uncached
values, so that it was easily possible to see power-loss related
problems. The new code will check and recover at this place.
The patch will also ensure, that irqs are not cleared by checking
register status in debugfs.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mcp23s08 support configuration of the pullups using the
pinconf framework. This removes the custom pullup configuration
from platform data, which has no upstream users.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
mcp23xxx device have configurable 100k pullup resistors. This adds
support for enabling them using pinctrl's pinconf interface.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I failed to properly onion-wrap the unwind code: We acquire the vblank
reference before we start with the wait-wound locking dance, hence we
must make sure we retry before we drop the reference. Oops.
v2: The vblank_put must be after the frambuffer_put (Michel). I suck at
unwrapping code that doesn't use separate labels for each stage, but
checks each pointer first ... While re-reading everything I also
realized that we must clean up the fb refcounts, and specifically
plane->old_fb before we drop the locks, either in the final unlocking,
or in the w/w retry path. Hence the correct fix is to drop the
vblank_put to the very bottom.
Fixes: 29dc0d1de1 ("drm: Roll out acquire context for the page_flip ioctl")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Tommi Rantala <tt.rantala@gmail.com>
Cc: Michel Dänzer <michel@daenzer.net>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170522135945.28831-1-daniel.vetter@ffwll.ch
This model is actually called 92XXM2-8 in Windows driver. But since pin
configs for M22 and M28 are identical, just reuse M22 quirk.
Fixes external microphone (tested) and probably docking station ports
(not tested).
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zA8N
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20170522' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes
Pull vfio-ccw fix from Conelia Huck:
"vfio-ccw: one patch"
* Make some symbols in vfio-ccw static, as detected by sparse.
We used to use kmalloc (more exactly, krealloc()) for creating and
growing the temporary buffer for text proc write. It can grow up to
16kB, and it's already a bit doubtful whether it's always safe to use
kmalloc(). With the recent addition of kvmalloc(), we can have a
better chance for succeed of memory allocation, so let's switch to
that new API.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM core code has a few usages of set_fs(), mostly for two codepaths:
- The DELAY ioctl call from pcm_compat.c
- The ioctl wrapper in kernel context for PCM OSS and other
This patch removes the set_fs() usage in these places by a slight code
refactoring. For the former point, snd_pcm_delay() is changed to
return the value directly instead of putting the value to the given
address. Each caller stores the result in an appropriate manner.
For fixing the latter, snd_pcm_lib_kernel_ioctl() is changed to call
the functions directly as well. For achieving it, now the function
accepts only the limited set of ioctls that have been used, so far.
The primary user of this function is the PCM OSS layer, and the only
other user is USB UAC1 gadget driver. Both drivers don't need the
full set of ioctls.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch simplifies the code of snd_ctl_elem_list() in the following
ways:
- Avoid a vmalloc() temporary buffer but do copy in each iteration;
the vmalloc buffer was introduced at the time we took the spinlock
for the ctl element management.
- Use the standard list_for_each_entry() macro
- Merge two loops into one;
it used to be a loop for skipping until offset becomes zero and
another loop to copy the data. They can be folded into a single
loop easily.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With enabling this workaround, can observe GPU hang issue on Gen9. As
currently host side doesn't have this workaround, disable it from GVT
side.
v2:
- Fix indent error.(Zhenyu)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch simply replace all occurrence of HMAC IPAD/OPAD value by their
define.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
