irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.
That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.
Cure it by storing handler data before installing the chained handler.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
The i2c functions need to test the pm_suspend state and do, if needed, some
retry before i2c operations. This code was repeated 4x.
To isolate this, create a new function to check suspend state and call it in
every need place.
As at it, move the error message from pr_err to dev_err.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Yueyao Zhu <yueyao.zhu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix reset of i2c_busy flag if an error occurs during the i2c block read.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Yueyao Zhu <yueyao.zhu@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue where TTY-migrated synths would take a while
to shut up after hitting numpad enter key. When calling synth_flush,
even though XOFF character is sent as high priority, data buffered in
TTY layer is still sent to the synth. This patch flushes that buffered
data when synth_flush is called.
It also tries to ensure that hardware flow control is enabled, by
setting CRTSCTS using tty's termios.
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simply uses the changes introduced in previous patches and migrates
apollo, ltlk, audptr, decext, spkout and dectlk. Migrations are straightforward
function pointer updates.
Signed-off by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds further TTY-based functionality, specifically implementation
of send_xchar and tiocmset methods, and input. send_xchar and tiocmset
methods simply delegate to corresponding TTY operations.
For input, it implements the receive_buf2 callback in tty_ldisc_ops of
speakup's ldisc. If a synth defines read_buff_add method then receive_buf2
simply delegates to that and returns.
For spk_ttyio_in, the data is passed from receive_buf2 thread to
spk_ttyio_in thread through spk_ldisc_data structure. It has following
members:
- char buf: represents data received
- struct semaphore sem: used to signal to spk_ttyio_in thread that data
is available to be read without having to busy wait
- bool buf_free: this is used in comination with mb() calls to syncronise
the two threads over buf
receive_buf2 only writes to buf if buf_free is true. The check for buf_free
and writing to buf are separated by mb() to ensure that spk_ttyio_in has read
buf before receive_buf2 writes to it. After writing, it ups the semaphore to
signal to spk_ttyio_in that there is now data to read.
spk_ttyio_in waits for data to read by downing the semaphore. Thus when
signalled by receive_buf2 thread above, it reads from buf and sets buf_free
to true. These two operations are separated by mb() to ensure that
receive_buf2 thread finds buf_free to be true only after buf has been read.
After that spk_ttyio_in calls tty_schedule_flip for subsequent data to come
in through receive_buf2.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This changes the above five synths to TTY-based comms. They were chosen as a
first pass because their serial comms are straightforward, i.e. they don't use
serial input and don't do internal port knocking.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds spk_ttyio.c file. It contains a set of functions which implement
those methods in spk_synth struct which relate to sending bytes out using
serial comms. Implementations in this file perform the same function but
using TTY subsystem instead. Currently synths access serial ports, directly
poking standard ISA ports by trying to steal them from serial driver. Some ISA
cards actually need this way of doing it, but most other synthesizers don't,
and can actually work by using the proper TTY subsystem through a new N_SPEAKUP
line discipline. So this adds the methods for drivers to switch to accessing
serial ports through the TTY subsystem, whenever appropriate.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This exports tty_open_by_driver so that it can be called from other
places inside the kernel. The checks for null file pointer are based on
Alan Cox's patch here:
http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1215095.html.
Description below is quoted from it:
"[RFC] tty_port: allow a port to be opened with a tty that has no file handle
Let us create tty objects entirely in kernel space. Untested proposal to
show why all the ideas around rewriting half the uart stack are not needed.
With this a kernel created non file backed tty object could be used to handle
data, and set terminal modes. Not all ldiscs can cope with this as N_TTY in
particular has to work back to the fs/tty layer.
The tty_port code is however otherwise clean of file handles as far as I can
tell as is the low level tty port write path used by the ldisc, the
configuration low level interfaces and most of the ldiscs.
Currently you don't have any exposure to see tty hangups because those are
built around the file layer. However a) it's a fixed port so you probably
don't care about that b) if you do we can add a callback and c) you almost
certainly don't want the userspace tear down/rebuild behaviour anyway.
This should however be sufficient if we wanted for example to enumerate all
the bluetooth bound fixed ports via ACPI and make them directly available.
It doesn't deal with the case of a user opening a port that's also kernel
opened and that would need some locking out (so it returned EBUSY if bound
to a kernel device of some kind). That needs resolving along with how you
"up" or "down" your new bluetooth device, or enumerate it while providing
the existing tty API to avoid regressions (and to debug)."
The exported funtion is used later in this patch set to gain access to tty_struct.
[changed export symbol level - gkh]
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-remove duplicate tty allocation code for serial and printer drivers.
-add missing tty c_ispeed and c_ospeed initialization to 9600.
-fix sparse warning: too long initializer-string for array of char.
This patch was only unit tested due to lack of the actual hardware.
Signed-off-by: Haim Daniel <haimdaniel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a 'code indent should use tabs where possible' checkpatch code
style error by changing whitespace into tabs.
Signed-off-by: Remco Verhoef <remco@dutchcoders.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the BIT(n) macro instead of '(1 << n)' in definitions where the bit
semantics clearly applies.
Fixes true positive "Prefer using the BIT macro" checks reported by
checkpatch.
Some of these checks are still triggering on definitions using
'(1 << n)', namely for PIO2_CNTR_SC_DEV1, PIO2_CNTR_RW_LSB and
PIO2_CNTR_MODE1. Leave them be, as the context there is more of a
"multi-bit field value" ((val << n), where for some cases 'val' happens
to be 1) rather than a "single bit" (1 << n), so keeping the value as is
in the code makes it more readable that using a combination of BIT
macros.
Signed-off-by: Ricardo Silva <rjpdasilva@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase local variables' name with underscores to comply
with the standard kernel coding style.
Changed:
- LinkSpeed
- TransmittedFrameCount
- ReceivedFragmentCount
- FailedCount
- FCSErrorCount
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renesas RZ/G1E (R8A7745) is pin compatible with R-Car E2 (R8A7794),
however it doesn't have several automotive specific peripherals.
Annotate all the items that only exist on the R-Car SoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
[geert: Drop annotations, as they are implied by pin groups/functions]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The R8A7794 PFC driver was apparently based on the preliminary revisions
of the user's manual which had some signals and MOD_SEL register fields
described which the recent manual changed to reserved. Of course, these
signals haven't ever been really used, which makes removing them
painless.
While at it, make the large *enum* look better by starting a new line
each time a new row in the IPSR and MOD_SEL register field tables is
started.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The ATA_AVTP_* signals are documented as reserved in the recent R-Car E2
user's manual (the only remaining mention is in the table 5.2 and I believe
it's a simple overlook). Remove the AVB_AVTP_* pinmux groups -- we will
remove the signals themselves in the next patch, along with the other now
reserved bits...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The R8A7794 PFC driver was apparently based on the preliminary revisions
of the user's manual which called I2C5 device IIC0 and IIC0 device IIC1.
Luckily, these signals haven't been used for any functions/groups so
far, so the renaming should be painless..
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas RZ/G1M (R8A7743) is pin compatible with R-Car M2-W/N (R8A7791/3),
however it doesn't have several automotive specific peripherals. Annotate
all the items that only exist on the R-Car SoCs and only supply the pin
groups/functions existing on a given SoC...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
[geert: Drop annotations, as they are implied by pin groups/functions]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
changeset b97f193abf ("scripts/kernel-doc: fix parser
for apostrophes") added support for ``literal`` inside
kernel-doc, in order to allow using the "%" symbol inside
a literal block, as this is used at printk() description.
Document it.
Fixes: b97f193abf ("scripts/kernel-doc: fix parser for apostrophes")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The USB gadget documentation is not at DocBook anymore.
The main file was converted to ReST, and stored at
Documentation/driver-api/usb/gadget.rst, but there are
still several plain text files related to gadget under
Documentation/usb.
So, be generic and just mention documentation
without specifying where it is.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The filesystem documentation was moved from DocBook to
Documentation/filesystems/. Update it at the sources.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This book got converted from DocBook. Update its references to
point to the current location.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The libata documentation is now using ReST. Update references
to it to point to the new place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
DocBook is mentioned several times at the documentation. Update
the obsolete references from it at the DocBook.
Acked-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This file is outdated. Still, as it is the only one left at
DocBook dir, convert it, and store it, with a .txt extension,
under Documentation/lsm.txt.
This way, we can get rid of DocBook from the building system,
without needing to wait for someone to take care of it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Group the :: with the previous paragraph, in order to make it
visually better when reading as a text file.
While here, replace:
ored (with means "Covered or adorned with ore or metal")
by:
OR-ed
To reflect its true meaning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
The tables were manually adjusted to fit into 80 columns.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx is very pedantic with regards to ident/spacing.
Fix some kernel-doc markups in order to solve those
errors/warnings:
./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string.
./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string.
./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string.
./drivers/scsi/scsi_scan.c:1056: ERROR: Unexpected indentation.
./drivers/scsi/scsi_scan.c:1057: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/scsi/scsi_transport_fc.c:2918: ERROR: Unexpected indentation.
./drivers/scsi/scsi_transport_fc.c:2921: WARNING: Block quote ends without a blank line; unexpected unindent.
./drivers/scsi/scsi_transport_fc.c:2922: WARNING: Enumerated list ends without a blank line; unexpected unindent.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Some manual adjustments were required due to some
conversion error on some literals.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The "%" escape code of kernel-doc only handle letters. It
doesn't handle special chars. So, use the ``literal``
notation. That fixes this warning:
./include/linux/skbuff.h:2695: WARNING: Inline literal start-string without end-string.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use pandoc to convert documentation to ReST by calling
Documentation/sphinx/tmplcvt script.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of just using text for functions and structs, use
the C domain tags, in order to allow cross-referencing with
the kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
