We can determine that the pipe was shut down from pipe<0, so there's
no point in duplicating that information as 'hdmi_connected'.
v2: Use pipe<0 instead of port<0 as we'll want to do per-port
PCM devices later
Initialize pipe to -1 to inidicate inactive initial state
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-7-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
There's no need to distinguish between the DP link rate and HDMI TMDS
clock for the purposes of the LPE audio. Both are actually the same
thing more or less, which is the link symbol clock. So let's just
call the thing ls_clock and simplify the code.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-6-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
The pending_notify flag in the LPE audio platform data is pointless,
actually unused. So let's kill it off.
v2: Fix typo in patch subject
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-5-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.
If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.
So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Clear the notify function pointer in the platform data before we tear
down the driver. Otherwise i915 would end up calling a stale function
pointer and possibly explode.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-3-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.
Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.
So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.
The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.
Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.
Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 0b6b524f39 ("ALSA: x86: Don't enable runtime PM as default")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
It appears as though the Broadwell-EP DRAM units share the special
units quirk with Haswell-EP/KNL.
Without this patch, you get really high results (a single DRAM using 20W
of power).
The powercap driver in drivers/powercap/intel_rapl.c already has this
change.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
gcc warns that an empty device tree would cause undefined behavior:
drivers/of/unittest.c: In function 'of_unittest':
drivers/of/unittest.c:2199:25: warning: 'last_sibling' may be used uninitialized in this function [-Wmaybe-uninitialized]
This adds an initialization of the variable to zero, which we handle
correctly.
Fixes: 81d0848fc8 ("of: Add unit tests for applying overlays")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits,
so don't set them on Power9.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 616badd2fb ("powerpc/powernv: Use OPAL call for TCE kill on
NVLink2") forced all TCE kills to go via the OPAL call for
NVLink2. However the PHB3 implementation of TCE kill was still being
called directly from some functions which in some circumstances caused
a machine check.
This patch adds an equivalent IODA2 version of the function which uses
the correct invalidation method depending on PHB model and changes all
external callers to use it instead.
Fixes: 616badd2fb ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the radix TLB code includes support for CPUs that do *not*
have MMU_FTR_LOCKLESS_TLBIE. On those CPUs we are required to take a
global spinlock before issuing a tlbie.
Radix can only be built for 64-bit Book3s CPUs, and of those, only
POWER4, 970, Cell and PA6T do not have MMU_FTR_LOCKLESS_TLBIE. Although
it's possible to build a kernel with Radix support that can also boot on
those CPUs, we happen to know that in reality none of those CPUs support
the Radix MMU, so the code can never actually run on those CPUs.
So remove the native_tlbie_lock in the Radix TLB code.
Note that there is another lock of the same name in the hash code, which
is unaffected by this patch.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As we may unwind the requests, even though the request we are awaiting
has a global_seqno that seqno may be revoked during the await and so we
can not reliably use it as a barrier for all future awaits on the same
timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-6-chris@chris-wilson.co.uk
With the addition of the inter-context intel_time.sync map, having a
very similar sync_seqno[] is confusing. Aide the reader by denoting that
this is a pre-allocated array for storing semaphore sync points wrt to
the global seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-5-chris@chris-wilson.co.uk
Track the latest fence waited upon on each context, and only add a new
asynchronous wait if the new fence is more recent than the recorded
fence for that context. This requires us to filter out unordered
timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the
absence of a universal identifier, we have to use our own
i915->mm.unordered_timeline token.
v2: Throw around the debug crutches
v3: Inline the likely case of the pre-allocation cache being full.
v4: Drop the pre-allocation support, we can lose the most recent fence
in case of allocation failure -- it just means we may emit more awaits
than strictly necessary but will not break.
v5: Trim allocation size for leaf nodes, they only need an array of u32
not pointers.
v6: Create mock_timeline to tidy selftest writing
v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko)
v8: Prune the stale sync points when we idle.
v9: Include a small benchmark in the kselftests
v10: Separate the idr implementation into its own compartment. (Tvrkto)
v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto)
v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves
v13: kselftests to investigate struct i915_syncmap itself (Tvrtko)
v14: Foray into ascii art graphs
v15: Take into account that the random lookup/insert does 2 prng calls,
not 1, when benchmarking, and use for_each_set_bit() (Tvrtko)
v16: Improved ascii art
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
Currently we filter out repeated use of the same timeline in the low
level i915_gem_request_await_request(), after having added the
dependency on the old request. However, we can lift this to
i915_gem_request_await_dma_fence() (before the dependency is added)
using the observation that requests along the same timeline are
explicitly ordered via i915_add_request (along with the dependencies).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-3-chris@chris-wilson.co.uk
By first unwrapping an incoming fence-array into its child fences, we
can simplify the internal branching, and so avoid triggering a potential
bug in the next patch when not squashing the child fences on the same
timeline.
It will also have the advantage of keeping the (top-level) fence arrays
out of any fence/timeline caching since these are unordered timelines
but with a random context id.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-2-chris@chris-wilson.co.uk
2 clflushes on two different objects are not ordered, and so do not
belong to the same timeline (context). Either we use a unique context
for each, or we reserve a special global context to mean unordered.
Ideally, we would reserve 0 to mean unordered (DMA_FENCE_NO_CONTEXT) to
have the same semantics everywhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-1-chris@chris-wilson.co.uk
Replace the handcrafter loop when checking for fifo slots
with atomic wait for. This brings this wait in line with
the other waits on register access. We also get a readable
timeout constraint, so make it to fail after 10ms.
Chris suggested that we should fail silently as the fifo debug
handler, now attached to unclaimed mmio handling, will take care of the
possible errors at later stage.
Note that the decision to wait was changed so that we avoid
allocating the first reserved entry. Nor do we reduce the count
if we fail the wait, removing the possiblity to wrap the
count if the hw fifo returned zero.
v2: remove unclaimed check on timeout (Chris)
v3: use void return (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=100247
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1491493182-31540-1-git-send-email-mika.kuoppala@intel.com
Remove the per-mmio checking of the FIFO debug register into the common
conditional mmio debug handling. Based on patch from Chris Wilson.
v2: postpone warn on fifodbg for unclaimed reg debugs
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
If no NLM_F_EXCL is set and the element already exists in the set, make
sure that both elements have the same extensions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The increment of entry in the loop in mmu_init for meta1 is redundant as
it isn't used again, so drop it.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
In commit 461a6946b1 ("iommu: Remove pci.h include from
trace/events/iommu.h") that header shuffle uncovered an implicit
include in this driver, manifesting as:
CC drivers/soc/fsl/qbman/qman_portal.o
drivers/soc/fsl/qbman/qman_portal.c: In function 'qman_portal_probe':
drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'dma_set_mask'
drivers/soc/fsl/qbman/qman_portal.c:299:2: error: implicit declaration of function 'DMA_BIT_MASK'
if (dma_set_mask(dev, DMA_BIT_MASK(40))) {
^
on the corenet32_smp_defconfig (and 64 bit respectively.) The above
commit was singled out via git bisect.
The header it was implictly relying on getting was dma-mapping.h - so
we explicitly add it here.
Fixes: 461a6946b1 ("iommu: Remove pci.h include from trace/events/iommu.h")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Scott Wood <oss@buserror.net>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the following compile error(s) if CONFIG_KPROBES is disabled:
arch/s390/kernel/uprobes.c:79:14:
error: implicit declaration of function 'probe_get_fixup_type'
arch/s390/kernel/uprobes.c:87:14:
error: 'FIXUP_PSW_NORMAL' undeclared (first use in this function)
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix this compile error if CONFIG_MODULES is disabled:
arch/s390/built-in.o: In function `ftrace_plt_init':
arch/s390/kernel/ftrace.o:(.init.text+0x34cc): undefined reference to `module_alloc'
Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
git commit c5328901aa "[S390] entry[64].S improvements" removed
the update of the exit_timer lowcore field from the critical section
cleanup of the .Lsysc_restore/.Lsysc_done and .Lio_restore/.Lio_done
blocks. If the PSW is updated by the critical section cleanup to point to
user space again, the interrupt entry code will do a vtime calculation
after the cleanup completed with an exit_timer value which has *not* been
updated. Due to this incorrect system time deltas are calculated.
If an interrupt occured with an old PSW between .Lsysc_restore/.Lsysc_done
or .Lio_restore/.Lio_done update __LC_EXIT_TIMER with the system entry
time of the interrupt.
Cc: stable@vger.kernel.org # 3.3+
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently, the object path is not aligned in the build log:
LDS arch/ia64/kernel/gate.lds
AS arch/ia64/kernel/gate.o
GATE arch/ia64/kernel/gate.so
AS arch/ia64/kernel/gate-data.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull RCU fixes from Paul E. McKenney:
"This series adds a pair of commits that move function definitions
from include/linux/rcu_segcblist.h to new kernel/rcu/rcu_segcblist.h
and kernel/rcu/rcu_segcblist.c files, thus greatly decreasing the
size of the externally visible include/linux/rcu_segcblist.h file."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This enables the Kbuild standard log style as follows:
AS arch/alpha/lib/__divlu.o
AS arch/alpha/lib/__divqu.o
AS arch/alpha/lib/__remlu.o
AS arch/alpha/lib/__remqu.o
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These four objects are generated by the same build rule, with
different compile options. The build rules can be merged.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
$(ev6-y)divide.S is a source file, not a build-time generated file.
So, it should be prefixed with $(src)/ rather than $(obj)/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 84d582d236 ("xen: Revert commits da72ff5bfc and
72a9b18629") defined xen_have_vector_callback in enlighten_hvm.c.
Since guest-type-neutral code refers to this variable this causes
build failures when CONFIG_XEN_PVHVM is not defined.
Moving xen_have_vector_callback definition to enlighten.c resolves
this issue.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
machine_check_early() gets called in real mode. The very first time when
add_taint() is called, it prints a warning which ends up calling opal
call (that uses OPAL_CALL wrapper) for writing it to console. If we get a
very first machine check while we are in opal we are doomed. OPAL_CALL
overwrites the PACASAVEDMSR in r13 and in this case when we are done with
MCE handling the original opal call will use this new MSR on it's way
back to opal_return. This usually leads to unexpected behaviour or the
kernel to panic. Instead move the add_taint() call later in the virtual
mode where it is safe to call.
This is broken with current FW level. We got lucky so far for not getting
very first MCE hit while in OPAL. But easily reproducible on Mambo.
Fixes: 27ea2c420c ("powerpc: Set the correct kernel taint on machine check errors.")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The entire body of unregister_cpu_online() is inside an #ifdef
CONFIG_HOTPLUG_CPU block. This is ugly and means we create an empty function
when hotplug is disabled for no reason.
Instead move the #ifdef out of the function body and define the function to be
NULL in the else case. This means we'll pass NULL to cpuhp_setup_state(), but
that's fine because it accepts NULL to mean there is no teardown callback, which
is exactly what we want.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This code was until recently completely undocumented and even now the comment is
not very verbose.
We've already had one patch sent to remove the IRQ enable/disable because it's
"paradoxical and unnecessary". So document it thoroughly to save anyone else
from puzzling over it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Otherwise we might select it when its dependenices aren't enabled,
leading to a build break.
It's default y anyway, so will be on unless someone disables it
manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_eeh_reset() has special handling for PEs whose primary bus is the
root bus or the bus immediately underneath the root port.
The cxl bi-modal card support added in b0b5e5918a ("cxl: Add
cxl_check_and_switch_mode() API to switch bi-modal cards") relies on
this behaviour when hot-resetting the CAPI adapter following a mode
switch. Document this in pnv_eeh_reset() so we don't accidentally break
it.
Suggested-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Evaluate LDFLAGS_BUILD_ID (which involves invoking the compiler) only
once instead of over and over.
This provides a ~20% reduction in null build time with x86 allnoconfig:
$ make allnoconfig && make -j8
$ perf stat -r5 -e sched:sched_process_exec make -j8
- 2 119 sched:sched_process_exec
+ 1 878 sched:sched_process_exec
- 1,238817018 seconds time elapsed
+ 0,971020553 seconds time elapsed
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is currently impossible to see what is going on with objtool when
building, so call echo-cmd to see the actions:
gcc -Wp,-MD,arch/x86/entry/.entry_64.o.d -nostdinc -isystem ...
./tools/objtool/objtool check "arch/x86/entry/entry_64.o";
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In order to shrink size of struct discard_cmd, change variable type of
@state in struct discard_cmd from int to unsigned char.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, with protection of cmd_lock, we will wait for end io of
discard command which potentially may lead long latency, making worse
concurrency.
So, in this patch, we try to add reference into discard entry to prevent
the entry being released by other thread, then we can avoid holding
global cmd_lock during waiting discard to finish.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS uses 4 bytes to represent block address. As a result, supported
size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments.
Signed-off-by: Jin Qian <jinqian@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a page is cold, NOT atomit written and need_ipu now, there is
a high probability that IPU should be adapted. For IPU, we try to
check extent tree to get the block index first, instead of reading
the dnode page, where may lead to an useless dnode IO, since no need to
update the dnode index for IPU.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces encrypt_one_page which encrypts one data page before
submit_bio, and change the use of need_inplace_update.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For the "struct tcmu_cmd_entry" in cmd area, the minimum size
will be sizeof(struct tcmu_cmd_entry) == 112 Bytes. And it could
fill about (sizeof(struct rsp) - sizeof(struct req)) /
sizeof(struct iovec) == 68 / 16 ~= 4 data regions(iov[4]) by
default.
For most tcmu_cmds, the data block indexes allocated from the
data area will be continuous. And for the continuous blocks they
will be merged into the same region using only one iovec. For
the current code, it will always allocates the same number of
iovecs with blocks for each tcmu_cmd, and it will wastes much
memories.
For example, when the block size is 4K and the DATA_OUT buffer
size is 64K, and the regions needed is less than 5(on my
environment is almost 99.7%). The current code will allocate
about 16 iovecs, and there will be (16 - 4) * sizeof(struct
iovec) = 192 Bytes cmd area memories wasted.
Here adds two helpers to calculate the base size and full size
of the tcmu_cmd. And will recalculate them again when it make sure
how many iovs is needed before insert it to cmd area.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch allows the use of IRQ to notify the change of GPIO status
on MPC8xx CPM IO ports. This then allows to associate IRQs to GPIOs
in the Device Tree.
Ex:
CPM1_PIO_C: gpio-controller@960 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-c";
reg = <0x960 0x10>;
fsl,cpm1-gpio-irq-mask = <0x0fff>;
interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
interrupt-parent = <&CPM_PIC>;
gpio-controller;
};
The property 'fsl,cpm1-gpio-irq-mask' defines which of the 16 GPIOs
have the associated interrupts defined in the 'interrupts' property.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
