Commit graph

693,635 commits

Author SHA1 Message Date
Chen-Yu Tsai
5136914fe0 ARM: dts: sun8i-a23-q8-tablet: Drop pinmux setting for codec PA gpio
The old sunxi specific pinctrl bindings are deprecated, in favor of
the new generic pinconf bindings. Also, we are moving towards handling
GPIO pinmux settings that don't require extra bias or drive strength
settings to use the GPIO bindings only.

This patch removes the last instance of the sunxi specific pinctrl
bindings that use the pinctrl header by dropping the pinmux setting
for the audio codec's PA (external amplifier) control GPIO. The pin
is pulled down externally.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-27 13:39:57 +02:00
Colin Ian King
74a4ce4c8e ASoC: intel: remove unused variable data and associated code
The variable 'data' is assigned null and never re-assigned. There
is also a redundant check for data being non-null which is always
false, so remove this and the variable data and dma_addr as they
are not used once the dead code has been removed.

Detected with CoverityScan, CID#1324015 ("'Constant' variable gaurds
dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 12:31:43 +01:00
Takashi Iwai
36d96039e7 ASoC: intel: Don't print FW version repeatedly
Intel SST driver spews an info message "FW Versoin xxxx" at each time
the device gets initialized.  Since it's triggered at each PM (or even
runtime PM), it appears so ofetn, and rather becomes annoying than
useful.

This patch suppresses the superfluous messages by checking the
currently loaded FW version with the previously loaded one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 12:30:55 +01:00
Vignesh R
cb3c8e5ade spi: spi-ti-qspi: Remove unused dma_dev variable
commit 1351aaeb50 ("spi: spi-ti-qspi: Use dma_engine wrapper for dma
memcpy call") introduced this warning:

drivers/spi/spi-ti-qspi.c: In function 'ti_qspi_dma_xfer':
drivers/spi/spi-ti-qspi.c:398:21: warning: unused variable 'dma_dev' [-Wunused-variable]
  struct dma_device *dma_dev = chan->device;

Fix it by removing the unused variable.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 10:56:15 +01:00
Sergey Temerkhanov
41003396f9 EDAC, thunderx: Add Cavium ThunderX EDAC driver
Add support for Cavium ThunderX EDAC capable on-chip peripherals, namely
the DRAM controller (LMC), cache coherent processor interconnect (CCPI)
and level 2 cache blocks (L2C-TAD, L2C-MCI, L2C-CBC)

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Cc: David.Daney@cavium.com
Cc: Jan.Glauber@cavium.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170324222837.60583-1-s.temerkhanov@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2017-03-27 11:43:56 +02:00
Chris Wilson
0abfe7e257 drm/i915: Restore marking context objects as dirty on pinning
Commit e8a9c58fcd ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).

Fixes: e8a9c58fcd ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 5d4bac5503)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-27 11:56:27 +03:00
Gabriel Krisman Bertazi
c0411316ab drm: bochs: Prevent double-free of fb helper
If fbdev registration fails for whatever reason, the error path of
bochs_fbdev_init() will call bochs_fbdev_fini(), but since an fbdev
initialization error is not fatal to the probe function, a subsequent
device removal will try to call bochs_fbdev_fini() again, hitting the
Oops below.

This was detected by 0-day with a failing framebuffer registration and
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y.  This reproduces the scenario I
mentioned above at insmod time, because the test attempts to remove the
device right after probing.

root@debian:~# insmod bochs-drm.ko
[   17.609635] [drm] Found bochs VGA, ID 0xb0c0.
[   17.612974] [drm] Framebuffer size 16384 kB @ 0xfa000000, mmio @ 0xfebf2000.
[   17.613938] [TTM] Zone  kernel: Available graphics memory: 1022244 kiB
[   17.614701] [TTM] Initializing pool allocator
[   17.615427] [TTM] Initializing DMA pool allocator
[   17.619143] fbcon: bochsdrmfb (fb0) is primary device
[   17.619428] Console: switching to colour frame buffer device 128x48
[   17.621047] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[   17.641111] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[   17.642380] general protection fault: 0000 [#1] SMP
[   17.642985] Modules linked in: bochs_drm(+)
[   17.643259] CPU: 4 PID: 3279 Comm: insmod Tainted: G        W       4.11.0-rc1+ #119
[   17.643259] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   17.643259] task: ffff88007af35e00 task.stack: ffffc90000d84000
[   17.643259] RIP: 0010:drm_fb_helper_fini+0x8e/0x110
[   17.643259] RSP: 0018:ffffc90000d87ad0 EFLAGS: 00010202
[   17.643259] RAX: dead000000000200 RBX: ffff8800790d5770 RCX: 0000000000000000
[   17.652101] RDX: dead000000000100 RSI: 000000007fffffff RDI: ffffffff81eaf820
[   17.652101] RBP: ffffc90000d87ae0 R08: 0000000000000000 R09: ffff88007271d918
[   17.652101] R10: ffffc90000d87a88 R11: 0000000000000000 R12: 0000000000000000
[   17.652101] R13: ffff8800790d56d0 R14: 0000000000000000 R15: 0000000000000000
[   17.652101] FS:  00007f9285995700(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000
[   17.652101] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.652101] CR2: 0000564f1cf9f1e8 CR3: 0000000079686000 CR4: 00000000000006e0
[   17.652101] Call Trace:
[   17.652101]  bochs_fbdev_fini+0x24/0x90 [bochs_drm]
[   17.652101]  bochs_unload+0x16/0x50 [bochs_drm]
[   17.652101]  drm_dev_unregister+0x37/0xd0
[   17.652101]  drm_put_dev+0x31/0x60
[   17.652101]  bochs_pci_remove+0x10/0x20 [bochs_drm]
[   17.652101]  pci_device_remove+0x34/0xb0
[   17.652101]  driver_probe_device+0xd0/0x370
[   17.652101]  __driver_attach+0x96/0xa0
[   17.652101]  ? driver_probe_device+0x370/0x370
[   17.652101]  bus_for_each_dev+0x5b/0x90
[   17.652101]  driver_attach+0x19/0x20
[   17.652101]  bus_add_driver+0x11c/0x220
[   17.652101]  driver_register+0x5b/0xd0
[   17.652101]  ? 0xffffffffa0006000
[   17.652101]  __pci_register_driver+0x47/0x50
[   17.652101]  drm_pci_init+0xe1/0xf0
[   17.652101]  ? 0xffffffffa0006000
[   17.652101]  bochs_init+0x3c/0x1000 [bochs_drm]
[   17.652101]  do_one_initcall+0x3e/0x180
[   17.652101]  ? kmem_cache_alloc_trace+0x33/0x150
[   17.652101]  do_init_module+0x5a/0x1eb
[   17.652101]  load_module+0x1ea0/0x2650
[   17.652101]  ? __symbol_put+0x40/0x40
[   17.652101]  ? kernel_read_file+0x19e/0x1c0
[   17.652101]  ? kernel_read_file_from_fd+0x44/0x70
[   17.652101]  SYSC_finit_module+0xba/0xc0
[   17.652101]  SyS_finit_module+0x9/0x10
[   17.652101]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   17.652101] RIP: 0033:0x7f92854da119
[   17.652101] RSP: 002b:00007ffcd0390498 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   17.652101] RAX: ffffffffffffffda RBX: 00007f928578eb58 RCX: 00007f92854da119
[   17.652101] RDX: 0000000000000000 RSI: 0000564f1c8bd638 RDI: 0000000000000003
[   17.652101] RBP: 000000000000270e R08: 0000000000000000 R09: 00007f9285790ea0
[   17.652101] R10: 0000000000000003 R11: 0000000000000246 R12: 00007f928578eb58
[   17.652101] R13: 0000000000001020 R14: 0000564f1cf9e1c0 R15: 00007f928578eb00
[   17.652101] Code: c7 20 f8 ea 81 e8 b3 3e 50 00 48 8b 83 d0 00 00 00 48 8d 93 d0 00 00 00 48 39 c2 74 46 48 8b 83 d8 00 00 00 48 8b 93 d0 00 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 0000 ad de 48 89 83 d0
[   17.652101] RIP: drm_fb_helper_fini+0x8e/0x110 RSP: ffffc90000d87ad0
[   17.653331] ---[ end trace 542fd75a2e60a6a4 ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324045444.11912-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-03-27 10:34:52 +02:00
Pavel Tatashin
7b09cc5a9d sched/clock: Fix broken stable to unstable transfer
When it is determined that the clock is actually unstable, and
we switch from stable to unstable, the __clear_sched_clock_stable()
function is eventually called.

In this function we set gtod_offset so the following holds true:

  sched_clock() + raw_offset == ktime_get_ns() + gtod_offset

But instead of getting the latest timestamps, we use the last values
from scd, so instead of sched_clock() we use scd->tick_raw, and
instead of ktime_get_ns() we use scd->tick_gtod.

However, later, when we use gtod_offset sched_clock_local() we do not
add it to scd->tick_gtod to calculate the correct clock value when we
determine the boundaries for min/max clocks.

This can result in tick granularity sched_clock() values, so fix it.

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Fixes: 5680d8094f ("sched/clock: Provide better clock continuity")
Link: http://lkml.kernel.org/r/1490214265-899964-2-git-send-email-pasha.tatashin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 10:23:48 +02:00
Srikar Dronamraju
05b40e0577 sched/fair: Prefer sibiling only if local group is under-utilized
If the child domain prefers tasks to go siblings, the local group could
end up pulling tasks to itself even if the local group is almost equally
loaded as the source group.

Lets assume a 4 core,smt==2 machine running 5 thread ebizzy workload.
Everytime, local group has capacity and source group has atleast 2 threads,
local group tries to pull the task. This causes the threads to constantly
move between different cores. This is even more profound if the cores have
more threads, like in Power 8, smt 8 mode.

Fix this by only allowing local group to pull a task, if the source group
has more number of tasks than the local group.

Here are the relevant perf stat numbers of a 22 core,smt 8 Power 8 machine.

Without patch:
 Performance counter stats for 'ebizzy -t 22 -S 100' (5 runs):

             1,440      context-switches          #    0.001 K/sec                    ( +-  1.26% )
               366      cpu-migrations            #    0.000 K/sec                    ( +-  5.58% )
             3,933      page-faults               #    0.002 K/sec                    ( +- 11.08% )

 Performance counter stats for 'ebizzy -t 48 -S 100' (5 runs):

             6,287      context-switches          #    0.001 K/sec                    ( +-  3.65% )
             3,776      cpu-migrations            #    0.001 K/sec                    ( +-  4.84% )
             5,702      page-faults               #    0.001 K/sec                    ( +-  9.36% )

 Performance counter stats for 'ebizzy -t 96 -S 100' (5 runs):

             8,776      context-switches          #    0.001 K/sec                    ( +-  0.73% )
             2,790      cpu-migrations            #    0.000 K/sec                    ( +-  0.98% )
            10,540      page-faults               #    0.001 K/sec                    ( +-  3.12% )

With patch:

 Performance counter stats for 'ebizzy -t 22 -S 100' (5 runs):

             1,133      context-switches          #    0.001 K/sec                    ( +-  4.72% )
               123      cpu-migrations            #    0.000 K/sec                    ( +-  3.42% )
             3,858      page-faults               #    0.002 K/sec                    ( +-  8.52% )

 Performance counter stats for 'ebizzy -t 48 -S 100' (5 runs):

             2,169      context-switches          #    0.000 K/sec                    ( +-  6.19% )
               189      cpu-migrations            #    0.000 K/sec                    ( +- 12.75% )
             5,917      page-faults               #    0.001 K/sec                    ( +-  8.09% )

 Performance counter stats for 'ebizzy -t 96 -S 100' (5 runs):

             5,333      context-switches          #    0.001 K/sec                    ( +-  5.91% )
               506      cpu-migrations            #    0.000 K/sec                    ( +-  3.35% )
            10,792      page-faults               #    0.001 K/sec                    ( +-  7.75% )

Which show that in these workloads CPU migrations get reduced significantly.

Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/1490205470-10249-1-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 10:22:26 +02:00
Peter Zijlstra
9a93848fe7 x86/debug: Implement __WARN() using UD0
By using "UD0" for WARN()s we remove the function call and its possible
__FILE__ and __LINE__ immediate arguments from the instruction stream.

Total image size will not change much, what we win in the instruction
stream we'll lose because of the __bug_table entries. Still, saves on
I$ footprint and the total image size does go down a bit.

      text    data       filename
  10702123    4530992    defconfig-build/vmlinux.orig
  10682460    4530992    defconfig-build/vmlinux.patched

(UML didn't seem to use GENERIC_BUG at all, so remove it)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 10:20:28 +02:00
Vinod Koul
d7fd724e01 dmaengine: cppi: fix build error due to bad variable
Commit 8e3ba95f41 ("dmaengine: cppi41: use managed functions devm_*()")
moved the code to devm_* but erranously changed a varible name, so fix it.

drivers/dma/cppi41.c:1052:5: error: 'struct cppi41_dd' has no member named 'qmrg_mem'
  cdd->qmrg_mem = devm_ioremap_resource(dev, mem);
     ^
drivers/dma/cppi41.c:1053:16: error: 'struct cppi41_dd' has no member named 'qmrg_mem'
  if (IS_ERR(cdd->qmrg_mem))
                ^
drivers/dma/cppi41.c:1054:21: error: 'struct cppi41_dd' has no member named 'qmrg_mem'
   return PTR_ERR(cdd->qmrg_mem);
                     ^

Fixes: 8e3ba95f41 ("dmaengine: cppi41: use managed functions devm_*()")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 13:44:51 +05:30
Jani Nikula
69653f626e Merge tag 'gvt-fixes-2017-03-23' of https://github.com/01org/gvt-linux into drm-intel-fixes
gvt-fixes-2017-03-23

- KVM reference fix from Alex
- shadow gtt entry partial update fix from Xiaoguang
- gvt context notification check (Changbin)
- other misc fixes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-27 11:01:30 +03:00
Petr Cvek
a38b395521 usb: gadget: pxa27x: Remove duplicate function prototype
Functions udc_enable() and udc_disable() have a duplicated prototype.
Remove it.

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-27 10:46:34 +03:00
Lu Baolu
05428ba983 usb: dwc3: remove dwc3_log_msg trace class
dwc3_log_msg trace class isn't used any more. Suggest to remove it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-27 10:46:34 +03:00
Michal Nazarewicz
edc69d5562 usb: gadget: mv_udc: clarify a switch with an implicit fall-through
Rearrange statements in mv_ep_enable function so that it’s obvious
what the switch does and how zlt, ios and mult variables are
initialised.  Most notably, this gets rid of an implicit fall-through
so people don’t have to wonder whether it was intenional or not.

Addresses-Coverity-ID: 201385
Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-27 10:46:33 +03:00
Felipe Balbi
1966b8657d usb: dwc3: make sure UX_EXIT_PX is cleared
This bit is only supposed to be used with known
buggy PHYs, however some platforms might erroneously
set it. In order to avoid it, let's make sure this
bit is always cleared. If some PHY needs this, we
will need to add a quirk flag.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-27 10:46:33 +03:00
Daniel Vetter
18dddadc78 drm/atomic: Introduce drm_atomic_helper_shutdown
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.

Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.

While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...

v2: Make it compile on arm drivers too (Noralf).

v3: Correct kerneldoc to point at _disable_all().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
2017-03-27 09:43:58 +02:00
Alan Stern
1633682053 USB: fix linked-list corruption in rh_call_control()
Using KASAN, Dmitry found a bug in the rh_call_control() routine: If
buffer allocation fails, the routine returns immediately without
unlinking its URB from the control endpoint, eventually leading to
linked-list corruption.

This patch fixes the problem by jumping to the end of the routine
(where the URB is unlinked) when an allocation failure occurs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27 09:24:13 +02:00
Greg Kroah-Hartman
96fb7e256a Merge 4.11-rc4 into driver-core-next
We want the fixes in here for merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27 09:21:25 +02:00
Greg Kroah-Hartman
e47ff590cc Merge 4.11-rc4 into usb-next
This resolves a merge issue in the gadget code, and we want the USB
fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27 09:19:32 +02:00
Greg Kroah-Hartman
57c0eabbd5 Merge 4.11-rc4 into char-misc-next
We want the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27 09:13:04 +02:00
Greg Kroah-Hartman
1c816bad41 Merge 4.11-rc4 into staging-next
We need the IIO fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27 09:11:25 +02:00
Kirill A. Shutemov
f2a6a70501 x86: Convert the rest of the code to support p4d_t
This patch converts x86 to use proper folding of a new (fifth) page table level
with <asm-generic/pgtable-nop4d.h>.

That's a bit of a kitchen sink patch, but I don't see how to split it further
without hurting bisectability.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-7-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:58 +02:00
Xiong Zhang
907cd43902 x86/xen: Change __xen_pgd_walk() and xen_cleanmfnmap() to support p4d
Split these helpers into a couple of per-level functions and add support for
an additional page table level.

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[ Split off into separate patch ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:49 +02:00
Kirill A. Shutemov
d691a3cf80 x86/kasan: Prepare clear_pgds() to switch to <asm-generic/pgtable-nop4d.h>
With folded p4d, pgd_clear() is a nop. Change clear_pgds() to use
p4d_clear() instead.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:41 +02:00
Kirill A. Shutemov
4547833602 x86/mm/pat: Add 5-level paging support
Straight-forward extension of existing code to support additional page
table level.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:34 +02:00
Kirill A. Shutemov
e981316f56 x86/efi: Add 5-level paging support
Allocate additional page table level and ajdust efi_sync_low_kernel_mappings()
to work with additional page table level.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:25 +02:00
Kirill A. Shutemov
7f68904182 x86/kexec: Add 5-level paging support
Handle additional page table level in the kexec code.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317185515.8636-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-27 08:56:13 +02:00
Noralf Trønnes
79b85d2b7e drm/tinydrm: Fix drm_driver.fops.owner
drm_driver.fops can't be shared since the owner then becomes tinydrm.ko.
Move the fops declaration to the driver.

v2: Use DEFINE_DRM_GEM_CMA_FOPS

Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170326142529.16938-1-noralf@tronnes.org
2017-03-27 08:41:35 +02:00
Romain Perier
187697a454 drm: dw_hdmi: Don't rely on the status of the bridge for updating HPD
Currently, the irq handler that monitors changes for HPD and RX_SENSE
relies on the status of the bridge for updating the status of the HPD.
The update is done only when the bridge is enabled.

However, on Rockchip platforms we have found use cases where it could be
a problem. When HDMI is being used, turning off/on the screen or
unplugging/re-plugging the cable, the following simplified code path
will happen:

- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is on
hdmi->disabled is false, then the handler will update the rxsense flag
accordingly.
- dw_hdmi_update_power() will be invoked with the mode
DRM_FORCE_UNSPECIFIED and rxsense == 1, so dw_hdmi_poweroff() will be
called and the PHY will be desactivated (its pixel clocks and TMDS)

[...]

- dw_hdmi_bridge_disable() will be invoked, the bridge will be marked as
disabled.

- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is
currently disabled the HPD status won't be updated, so hdmi->rxsense
won't be changed. Even if the data part of the PHY is disabled, this
information coming from the HDMI Transmitter is correct and should be
saved.

[...]

- dw_hdmi_bridge_enable() will be invoked, the bridge will be marked as
enabled.
- dw_hdmi_update_power() will be called. When hdmi->force is equal to
DRM_FORCE_UNSPECIFIED the function will rely on hdmi->rxsense. If this
field has not been updated by the irq handler, it will be false and
DRM_FORCE_ON won't be put to hdmi->force.

Consequently, most of the time dw_hdmi_poweron() won't be called in this
use case, TMDS won't be re-enabled the PHY won't be re-initialized,
resulting in a "Signal not found".

This commit fixes the issue by removing the check for "!hdmi->disabled".
As already explained, even if the PHY is partially disabled, information
coming from HDMI Transmitter about HPD should be saved for a later use.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/143602/
2017-03-27 11:50:48 +05:30
Jiada Wang
7f3ff14b7e dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
sdma_disable_channel() cannot ensure dma is stopped to access
module's FIFOs. There is chance SDMA core is running and accessing
BD when disable of corresponding channel, this may cause sometimes
even after call of .sdma_disable_channel(), SDMA core still be
running and accessing module's FIFOs.

According to NXP R&D team a delay of one BD SDMA cost time (maximum
is 1ms) should be added after disable of the channel bit, to ensure
SDMA core has really been stopped after SDMA clients call
.device_terminate_all.

This patch introduces adds a new function sdma_disable_channel_with_delay()
which simply adds 1ms delay after call sdma_disable_channel(),
and set it as .device_terminate_all.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:50:59 +05:30
Andy Shevchenko
8e3ba95f41 dmaengine: cppi41: use managed functions devm_*()
This makes the error handling much more simpler than open-coding
everything and in addition makes the probe function smaller an tidier.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:49:34 +05:30
Andy Shevchenko
a08f2673dd dmaengine: cppi41: fix cppi41_dma_tx_status() logic
It makes sense to set residue when channel is in progress. Otherwise it
should be 0 since transfer is completed. Meanwhile this patch doesn't
prevent to set residue value anyway.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:49:34 +05:30
Sinan Kaya
dc7c733acb dmaengine: qcom_hidma: pause the channel on shutdown
We need to ensure that all DMAs and interrupts are cleared during
shutdown operation in order for kexec to start the next kernel clearly.

Otherwise, HW could be performing a DMA into random addresses in the
middle of second kernel start.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:43:38 +05:30
Sinan Kaya
c3a4528788 dmaengine: qcom_hidma: disable/enable IRQs on pause/resume
Once the channels are stopped, disable interrupts to make sure no new
HW interaction can happen.

Similarly, re-enable the interrupts only if we know that channel is
operational again.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:43:38 +05:30
Alexey Dobriyan
6c786bcb29 xfrm: branchless addr4_match() on 64-bit
Current addr4_match() code has special test for /0 prefixes because of
standard required undefined behaviour. However, it is possible to omit
it on 64-bit because shifting can be done within a 64-bit register and
then truncated to the expected value (which is 0 mask).

Implicit truncation by htonl() fits nicely into R32-within-R64 model
on x86-64.

Space savings: none (coincidence)
Branch savings: 1

Before:

	movzx  eax,BYTE PTR [rdi+0x2a]		# ->prefixlen_d
	test   al,al
	jne    xfrm_selector_match + 0x23f
		...
	movzx  eax,BYTE PTR [rbx+0x2b]		# ->prefixlen_s
	test   al,al
	je     xfrm_selector_match + 0x1c7

After (no branches):

	mov    r8d,0x20
	mov    rdx,0xffffffffffffffff
	mov    esi,DWORD PTR [rsi+0x2c]
	mov    ecx,r8d
	sub    cl,BYTE PTR [rdi+0x2a]
	xor    esi,DWORD PTR [rbx]
	mov    rdi,rdx
	xor    eax,eax
	shl    rdi,cl
	bswap  edi

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-03-27 07:04:14 +02:00
Kuninori Morimoto
1175f83cdb dmaengine: rcar-dmac: enable descriptor mode on 40bit
SYS-DMAC can use 40bit address transfer, and it supports Descriptor
Mode too. Current SYS-DMAC driver disables Descriptor Mode if it was
40bit address today. But it can use Descriptor Mode with 40bit if
transfer Source/Destination address are located in same 4GiB region
in the 40 bit address space.
This patch enables it if all condition was clear

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-27 10:06:37 +05:30
Alexey Kardashevskiy
6b5c19c552 powerpc/mmu: Add real mode support for IOMMU preregistered memory
This makes mm_iommu_lookup() able to work in realmode by replacing
list_for_each_entry_rcu() (which can do debug stuff which can fail in
real mode) with list_for_each_entry_lockless().

This adds realmode version of mm_iommu_ua_to_hpa() which adds
explicit vmalloc'd-to-linear address conversion.
Unlike mm_iommu_ua_to_hpa(), mm_iommu_ua_to_hpa_rm() can fail.

This changes mm_iommu_preregistered() to receive @mm as in real mode
@current does not always have a correct pointer.

This adds realmode version of mm_iommu_lookup() which receives @mm
(for the same reason as for mm_iommu_preregistered()) and uses
lockless version of list_for_each_entry_rcu().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-27 15:25:48 +11:00
Andy Shevchenko
366380cd62 Revert "extcon: usb-gpio: add support for ACPI gpio interface"
The commit 942c7924a5 introduced a check for ACPI handle for the
device that never appears on any ACPI-enabled platform so far. It seems
a confusion with extcon-intel-int3496 which does support ACPI-enabled
platforms.

Revert commit 942c7924a5 to avoid any confusion in the future.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-27 13:17:41 +09:00
Michael Ellerman
2db2c250dd selftests/powerpc: Fix standalone powerpc build
The changes to enable building with a separate output directory, in
commit a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT") broke
building the powerpc selftests on their own, eg:

 $ cd tools/testing/selftests/powerpc; make

It was partially fixed in commit e53aff45c4 ("selftests: lib.mk Fix
individual test builds"), which defined OUTPUT for standalone tests. But
that only defines OUTPUT within the Makefile, the value is not exported
so sub-shells can't see it. We could export OUTPUT, but it's actually
cleaner to just expand the value of OUTPUT before we invoke the shell.

Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-27 15:11:44 +11:00
Linus Torvalds
c02ed2e75e Linux 4.11-rc4 v4.11-rc4 2017-03-26 14:15:16 -07:00
Linus Torvalds
0dc82fa59b Char/Misc driver fixes for 4.11-rc4
A smattering of different small fixes for some random driver subsystems.
 Nothing all that major, just resolutions for reported issues and bugs.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNedPQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykY+wCeL0dFw/ney0sJ6s7HsmXu3uxFGyoAoIIXL7AP
 48YAht+BOOmBzagXIKbw
 =EFxm
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "A smattering of different small fixes for some random driver
  subsystems. Nothing all that major, just resolutions for reported
  issues and bugs.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  extcon: int3496: Set the id pin to direction-input if necessary
  extcon: int3496: Use gpiod_get instead of gpiod_get_index
  extcon: int3496: Add dependency on X86 as it's Intel specific
  extcon: int3496: Add GPIO ACPI mapping table
  extcon: int3496: Rename GPIO pins in accordance with binding
  vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
  ppdev: fix registering same device name
  parport: fix attempt to write duplicate procfiles
  auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
  Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
  Drivers: hv: vmbus: Don't leak channel ids
  Drivers: hv: util: don't forget to init host_ts.lock
  Drivers: hv: util: move waiting for release to hv_utils_transport itself
  vmbus: remove hv_event_tasklet_disable/enable
  vmbus: use rcu for per-cpu channel list
  mei: don't wait for os version message reply
  mei: fix deadlock on mei reset
  intel_th: pci: Add Gemini Lake support
  intel_th: pci: Add Denverton SOC support
  intel_th: Don't leak module refcount on failure to activate
  ...
2017-03-26 11:15:54 -07:00
Linus Torvalds
9e54ef9da5 driver core fix for 4.11-rc4
Here is a single kernfs fix for 4.11-rc4 that resolves a reported issue.
 
 It has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNedpw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykLkgCdEVdmtWb9Fd0igfh7bSWBHdD9W20An3vKOror
 nTP7sT8FwSWGKdOpIaik
 =0Eht
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single kernfs fix for 4.11-rc4 that resolves a reported
  issue.

  It has been in linux-next with no reported issues"

* tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
2017-03-26 11:05:42 -07:00
Linus Torvalds
f1638fc65e TTY/Serial driver fixes for 4.11-rc4
Here are some tty and serial driver fixes for 4.11-rc4.  One of these
 fix a long-standing issue in the ldisc code that was found by Dmitry
 Vyukov with his great fuzzing work.  The other fixes resolve other
 reported issues, and there is one revert of a patch in 4.11-rc1 that
 wasn't correct.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNeexA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykTSQCg11kA9FkRe28wurC7hljx8tcnBmsAoNE5Arw8
 b3NfQ3Sm50gVPXxKQPWZ
 =WyEk
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some tty and serial driver fixes for 4.11-rc4.

  One of these fix a long-standing issue in the ldisc code that was
  found by Dmitry Vyukov with his great fuzzing work. The other fixes
  resolve other reported issues, and there is one revert of a patch in
  4.11-rc1 that wasn't correct.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix data race in tty_ldisc_ref_wait()
  tty: don't panic on OOM in tty_set_ldisc()
  Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"
  tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision
  serial: 8250_dw: Fix breakage when HAVE_CLK=n
  serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
2017-03-26 11:03:42 -07:00
Linus Torvalds
53b4d5911d IIO fixes for 4.11-rc4
Here are some small IIO driver fixes for 4.11-rc4 that resolve a number
 of tiny reported issues.  All of these have been in linux-next for a
 while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNeeCg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynXYwCcC+ZqoQ2zyAXI9NRNzADGqLgVLDkAoL5emrPe
 10VBu7ocPtuAI12QdcGI
 =xfgR
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes for 4.11-rc4 that resolve a
  number of tiny reported issues. All of these have been in linux-next
  for a while with no reported issues"

* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
  iio: adc: ti_am335x_adc: fix fifo overrun recovery
  iio: sw-device: Fix config group initialization
  iio: magnetometer: ak8974: remove incorrect __exit markups
  iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
2017-03-26 11:02:00 -07:00
Linus Torvalds
e431e0e427 USB/PHY fixes for 4.11-rc4
Here are a number of small USB and PHY driver fixes for 4.11-rc4.
 Nothing major here, just an bunch of small fixes, and a handfull of good
 fixes from Johan for devices with crazy descriptors.  There are a few
 new device ids in here as well.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNefwQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykewwCg1P1HEZV2wLJSalsPxduIKIRLcmkAnRcE0H31
 2egrp1seSGQumYcGQUJ/
 =2fH+
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 4.11-rc4.

  Nothing major here, just an bunch of small fixes, and a handfull of
  good fixes from Johan for devices with crazy descriptors. There are a
  few new device ids in here as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
  usb: gadget: udc: remove pointer dereference after free
  usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
  usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
  usb: gadget: acm: fix endianness in notifications
  usb: dwc3: gadget: delay unmap of bounced requests
  USB: serial: qcserial: add Dell DW5811e
  usb: hub: Fix crash after failure to read BOS descriptor
  ACM gadget: fix endianness in notifications
  USB: usbtmc: fix probe error path
  USB: usbtmc: add missing endpoint sanity check
  USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
  usb: musb: fix possible spinlock deadlock
  usb: musb: dsps: fix iounmap in error and exit paths
  usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
  usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
  uwb: i1480-dfu: fix NULL-deref at probe
  uwb: hwa-rc: fix NULL-deref at probe
  USB: wusbcore: fix NULL-deref at probe
  USB: uss720: fix NULL-deref at probe
  ...
2017-03-26 10:52:52 -07:00
Linus Torvalds
42234bf832 powerpc fixes for 4.11 #6
- cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
  - powerpc/64s: Fix idle wakeup potential to clobber registers
  - Revert "powerpc/64: Disable use of radix under a hypervisor"
  - gcc-plugins: update architecture list in documentation
 
 Thanks to:
   Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav Jain.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY1ySvAAoJEFHr6jzI4aWAYx8QAJHHLYvBc8Tl2kxXJRQos182
 6Dhff1dp8OJNNBSwPalJPPd/4SkJ4UTFP3CSobuhRmj5ZZ3qzQ3ONvZSC+9NtXFj
 yw2qGagabmGcInnHupVMTd13rrhveHOgC+7SabsnbjUeAqpoccv675P2MYLq0xYQ
 JILOTzbghVlwDhQD3e3/BBkqSSgWibMegGwO8rX8Z+Bw0c7X7tfz4Dpa5d5rnBzc
 jUgbzoBE9E9AQ0BJmp5Nqc8UwMvkWgFHwQ4/D5a+GEaE7rJmxG7twbYHJoGhgLkb
 ceB2iMfZDdagmCUrw179JmgKcSWBLoN9v/uykDrejdaEQCj+M8HTRFLZXccGd/1h
 p7FNr3z7lqLi9GxQnYDFtoOWbR4wK8Wirk45He5b9JSCqWYQxaxJcPqRx/IAG33O
 xXoMjdN79rrljerVnE1JZHB8WRXFEs4fEkGiahCnX8hC7VNIcSvMtgss2nsGgyHq
 vuMfdFvRhGfqKX6AL4cBukotCEvI1pPvo5LYpF6HiHxLM6+g/dX7ZlWrIOoEup1P
 5FhDk/pirRQurVI7Tvmiz3bUCqbloqhZBZ4vec0wz2lfHJ2+5cdoNM0+OGJkHJrN
 Jr7NvdlhH35Awz9Cf358oVpWlHNuPuJrmWnZSpWM+3/FTv7UM6WgComuzl9olF40
 jdqp+aUODC6gQH6sWlhP
 =4CFb
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc fixes from Michael Ellerman:
 "These are all pretty minor. The fix for idle wakeup would be a bad bug
  but has not been observed in practice.

  The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees
  OK'ed it going via powerpc and I didn't hear from Jon.

   - cxl: Route eeh events to all slices for pci_channel_io_perm_failure state

   - powerpc/64s: Fix idle wakeup potential to clobber registers

   - Revert "powerpc/64: Disable use of radix under a hypervisor"

   - gcc-plugins: update architecture list in documentation

  Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav
  Jain"

* tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  gcc-plugins: update architecture list in documentation
  Revert "powerpc/64: Disable use of radix under a hypervisor"
  powerpc/64s: Fix idle wakeup potential to clobber registers
  cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
2017-03-26 10:34:10 -07:00
Linus Torvalds
1c23de6308 Fix a memory leak on an error path, and two races when modifying
inodes relating to the inline_data and metadata checksum features.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljXHNMACgkQ8vlZVpUN
 gaPwoggAiodb37DHZ/X6fnRr8314OJT8mRUbUK3aDagCRb0Kp9iFAwwpHIG8Gxw1
 akI7Jy8VWLC4EbHb9wzXFEO7wl/IBLq3t70Vid2cBR302gblhIIz6hkHrQ9RIlW3
 MH5sFhXiVq4WYPuxQFWS6ohg6/SYTwcgI9rXxEnkLVmOiG2Ov2/v4/wiflau8vgK
 fNYyncHSylwJ5QIaT8mUIawetlunEHO0Vz5AZNzkcMhkzUHxmRWvMtGWcvwukstb
 7vXZhN5HHB8RZ33qcdtuAaNBHwBmrU/acicIpsvL/jfkFWlJTS0PBRUvwxnPeebo
 G0xRDEIwpZoy5h8fxzIxqh+CQqg6QA==
 =/ycw
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a memory leak on an error path, and two races when modifying
  inodes relating to the inline_data and metadata checksum features"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix two spelling nits
  ext4: lock the xattr block before checksuming it
  jbd2: don't leak memory if setting up journal fails
  ext4: mark inode dirty after converting inline directory
2017-03-26 10:29:21 -07:00
Peter Zijlstra
8ce371f984 lockdep: Fix per-cpu static objects
Since commit 383776fa75 ("locking/lockdep: Handle statically initialized
PER_CPU locks properly") we try to collapse per-cpu locks into a single
class by giving them all the same key. For this key we choose the canonical
address of the per-cpu object, which would be the offset into the per-cpu
area.

This has two problems:

 - there is a case where we run !0 lock->key through static_obj() and
   expect this to pass; it doesn't for canonical pointers.

 - 0 is a valid canonical address.

Cure both issues by redefining the canonical address as the address of the
per-cpu variable on the boot CPU.

Since I didn't want to rely on CPU0 being the boot-cpu, or even existing at
all, track the boot CPU in a variable.

Fixes: 383776fa75 ("locking/lockdep: Handle statically initialized PER_CPU locks properly")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-mm@kvack.org
Cc: wfg@linux.intel.com
Cc: kernel test robot <fengguang.wu@intel.com>
Cc: LKP <lkp@01.org>
Link: http://lkml.kernel.org/r/20170320114108.kbvcsuepem45j5cr@hirez.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-26 15:09:45 +02:00
Linus Lüssing
e2d9ba4355 batman-adv: restructure rebroadcast counter into forw_packet API
This patch refactors the num_packets counter of a forw_packet in the
following three ways:

1) Removed dual-use of forw_packet::num_packets:
   -> now for aggregation purposes only
2) Using forw_packet::skb::cb::num_bcasts instead:
   -> for easier access in aggregation code later
3) make access to num_bcasts private to batadv_forw_packet_*()

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
[sven@narfation.org: Change num_bcasts to unsigned]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-26 12:46:44 +02:00