There's a number of 'interesting' problems, all caused by holding
hb->lock while doing the rt_mutex_unlock() equivalient.
Notably:
- a PI inversion on hb->lock; and,
- a SCHED_DEADLINE crash because of pointer instability.
The previous changes:
- changed the locking rules to cover {uval,pi_state} with wait_lock.
- allow to do rt_mutex_futex_unlock() without dropping wait_lock; which in
turn allows to rely on wait_lock atomicity completely.
- simplified the waiter conundrum.
It's now sufficient to hold rtmutex::wait_lock and a reference on the
pi_state to protect the state consistency, so hb->lock can be dropped
before calling rt_mutex_futex_unlock().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.900002056@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is a weird state in the futex_unlock_pi() path when it interleaves
with a concurrent futex_lock_pi() at the point where it drops hb->lock.
In this case, it can happen that the rt_mutex wait_list and the futex_q
disagree on pending waiters, in particular rt_mutex will find no pending
waiters where futex_q thinks there are. In this case the rt_mutex unlock
code cannot assign an owner.
The futex side fixup code has to cleanup the inconsistencies with quite a
bunch of interesting corner cases.
Simplify all this by changing wake_futex_pi() to return -EAGAIN when this
situation occurs. This then gives the futex_lock_pi() code the opportunity
to continue and the retried futex_unlock_pi() will now observe a coherent
state.
The only problem is that this breaks RT timeliness guarantees. That
is, consider the following scenario:
T1 and T2 are both pinned to CPU0. prio(T2) > prio(T1)
CPU0
T1
lock_pi()
queue_me() <- Waiter is visible
preemption
T2
unlock_pi()
loops with -EAGAIN forever
Which is undesirable for PI primitives. Future patches will rectify
this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.850383690@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently futex-pi relies on hb->lock to serialize everything. But hb->lock
creates another set of problems, especially priority inversions on RT where
hb->lock becomes a rt_mutex itself.
The rt_mutex::wait_lock is the most obvious protection for keeping the
futex user space value and the kernel internal pi_state in sync.
Rework and document the locking so rt_mutex::wait_lock is held accross all
operations which modify the user space value and the pi state.
This allows to invoke rt_mutex_unlock() (including deboost) without holding
hb->lock as a next step.
Nothing yet relies on the new locking rules.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.751993333@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Part of what makes futex_unlock_pi() intricate is that
rt_mutex_futex_unlock() -> rt_mutex_slowunlock() can drop
rt_mutex::wait_lock.
This means it cannot rely on the atomicy of wait_lock, which would be
preferred in order to not rely on hb->lock so much.
The reason rt_mutex_slowunlock() needs to drop wait_lock is because it can
race with the rt_mutex fastpath, however futexes have their own fast path.
Since futexes already have a bunch of separate rt_mutex accessors, complete
that set and implement a rt_mutex variant without fastpath for them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: dvhart@infradead.org
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170322104151.702962446@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.
There is nothing the callers could do, except retrying over and over
again.
So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).
Fixes: e93f8a0f82 ("KVM: convert io_bus to SRCU")
Cc: stable@vger.kernel.org # 3.4+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can be reproduced by running L2 on L1, and disable VPID on L0
if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2
crash as below:
KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT= 00000000 0000ffff
IDT= 00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Reference SDM 30.3 INVVPID:
Protected Mode Exceptions
- #UD
- If not in VMX operation.
- If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0).
- If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does
not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0).
So we should check both VPID enable bit in vmx exec control and INVVPID support bit
in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable
VPID if either INVVPID or single-context/all-context invalidation is not exposed in
vmx capability MSRs.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can be reproduced by running kvm-unit-tests/vmx.flat on L0 w/ vpid disabled.
Test suite: VPID
Unhandled exception 6 #UD at ip 00000000004051a6
error_code=0000 rflags=00010047 cs=00000008
rax=0000000000000000 rcx=0000000000000001 rdx=0000000000000047 rbx=0000000000402f79
rbp=0000000000456240 rsi=0000000000000001 rdi=0000000000000000
r8=000000000000000a r9=00000000000003f8 r10=0000000080010011 r11=0000000000000000
r12=0000000000000003 r13=0000000000000708 r14=0000000000000000 r15=0000000000000000
cr0=0000000080010031 cr2=0000000000000000 cr3=0000000007fff000 cr4=0000000000002020
cr8=0000000000000000
STACK: @4051a6 40523e 400f7f 402059 40028f
We should hide and forbid VPID in L1 if it is disabled on L0. However, nested VPID
enable bit is set unconditionally during setup nested vmx exec controls though VPID
is not exposed through nested VMX capablity. This patch fixes it by don't set nested
VPID enable bit if it is disabled on L0.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5c614b3583 (KVM: nVMX: nested VPID emulation)
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After async pf setup successfully, there is a broadcast wakeup w/ special
token 0xffffffff which tells vCPU that it should wake up all processes
waiting for APFs though there is no real process waiting at the moment.
The async page present tracepoint print prematurely and fails to catch the
special token setup. This patch fixes it by moving the async page present
tracepoint after the special token setup.
Before patch:
qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0
After patch:
qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Quoting from the Intel SDM, volume 3, section 28.3.3.4: Guidelines for
Use of the INVEPT Instruction:
If EPT was in use on a logical processor at one time with EPTP X, it
is recommended that software use the INVEPT instruction with the
"single-context" INVEPT type and with EPTP X in the INVEPT descriptor
before a VM entry on the same logical processor that enables EPT with
EPTP X and either (a) the "virtualize APIC accesses" VM-execution
control was changed from 0 to 1; or (b) the value of the APIC-access
address was changed.
In the nested case, the burden falls on L1, unless L0 enables EPT in
vmcs02 when L1 doesn't enable EPT in vmcs12.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We have specific destructors for pic/ioapic, we'd better use them when
destroying the VM as well.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Mostly used for split irqchip mode. In that case, these two things are
not inited at all, so no need to release.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
update_subrect() adjusts the sub-rectangle to be inside a base area.
It checks width and height to not exceed those of the area, then it
checks the low border (left or top) to lie within the area, then the
high border (right or bottom) to lie there too. This latter check has
a bug, which is fixed by this patch.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[g.liakhovetski@gmx.de: dropped supposedly wrong hunks]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
After changes to v4l2_clk API introduced in v4.1 by commits a37462b919
'[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb
'[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor
stopped responding because v4l2_clk_get(), still called with
depreciated V4L2 clock name "mclk", started to return respective CCF
clock instead of the V4l2 one registered by soc_camera. Fix it by
calling v4l2_clk_get() with NULL clock name.
Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera fixes.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use dev_printk() when possible. This makes messages more consistent with
other device-related messages and, in some cases, adds useful information.
This changes messages like this:
Unable to allocate affinity masks, ignoring
to this:
pci 0000:01:00.0: can't allocate MSI affinity masks for 4 vectors
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to
the RTC must be 1 MHz.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This patch lists STM32F7's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This patch enables clocks for STM32F746 MCU.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
The MVPP2 network driver is used for the ARM64 Marvell Armada 7K and 8K
platforms, so enable it in the arm64 defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their corresponding Armada
7040 and 8040 Development boards.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The Armada 3720 DB board has an RTC on the I2C bus. It's a PT7C4337A from
Pericom but which claims to be fully compatible with the ds1337.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Now that the gpio expander is present in the dts, use it to add an USB3
PHY using one of these gpio as a regulator.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Bump driver version
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes a hang that can occur in ATA EH with ipr. With ipr's
usage of libata, commands should never end up on ap->eh_done_q. The
timeout function we use for ipr, even for SATA devices, is
scsi_times_out, so ATA_QCFLAG_EH_SCHEDULED never gets set for ipr and EH
is driven completely by ipr and SCSI. The SCSI EH thread ends up calling
ipr's eh_device_reset_handler, which then calls
ata_std_error_handler. This ends up calling ipr_sata_reset, which issues
a reset to the device. This should result in all pending commands
getting failed back and having ata_qc_complete called for them, which
should end up clearing ATA_QCFLAG_FAILED as qc->flags gets zeroed in
ata_qc_free. This ensures that when we end up in ata_eh_finish, we
don't do anything more with the command.
On adapters that only support a single interrupt and when running with
two MSI-X vectors or less, the adapter firmware guarantees that
responses to all outstanding commands are sent back prior to sending the
response to the SATA reset command. On newer adapters supporting
multiple HRRQs, however, this can no longer be guaranteed, since the
command responses and reset response may be processed on different
HRRQs.
If ipr returns from ipr_sata_reset before the outstanding command was
returned, this sends us down the path of __ata_eh_qc_complete which then
moves the associated scsi_cmd from the work_q in
scsi_eh_bus_device_reset to ap->eh_done_q, which then will sit there
forever and we will be wedged.
This patch fixes this up by ensuring that any outstanding commands are
flushed before returning from eh_device_reset_handler for a SATA device.
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch closes up some potential race conditions observed in the
error handling paths in ipr while debugging an issue resulting in a hang
with SATA error handling. These patches ensure we are holding the
correct lock when adding and removing commands from the free and pending
queues in some error scenarios.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes a race condition in the error handlomg paths of ipr. While a
command is outstanding to the adapter, it is placed on a pending queue
for the hrrq it is associated with, while holding the HRRQ lock. When a
command is completed, it is removed from the pending queue, under HRRQ
lock, and placed on a local list. This list is then iterated through
without any locks and each command's done function is invoked, inside of
which, the command gets returned to the free list while grabbing the
HRRQ lock. This fixes two race conditions when commands have been
removed from the pending list but have not yet been added to the free
list. Both of these changes fix race conditions that could result in
returning success from eh_abort_handler and then later calling scsi_done
for the same request.
The first race condition is in ipr_cancel_op. It looks through each
pending queue to see if the command to be aborted is still outstanding
or not. Rather than looking on the pending queue, reverse the logic to
check to look for commands that are NOT on the free queue. The second
race condition can occur when in ipr_wait_for_ops where we are waiting
for responses for commands we've aborted.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Removes some code in __ipr_eh_dev_reset which was modifying the ipr_cmd
done function. This should have already been setup at command allocation
time and if its since been changed, it means we are in the ipr_erp*
functions and need to wait for them to complete and don't want to
override that here.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Following a command abort or device reset, ipr's EH handlers wait for
the commands getting aborted to get sent back from the adapter prior to
returning from the EH handler. This fixes up some cases where the
completion handler was not getting called, which would have resulted in
the EH thread waiting until it timed out, greatly extending EH time.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Both struct fujitsu_bl and struct fujitsu_laptop have a pf_device field.
Up until now the latter has been redundant, which is logically incorrect
because the primary function of the platform device created by
fujitsu-laptop is to provide laptop-related (not brightness-related)
attributes to userspace.
Remove the pf_device field from struct fujitsu_bl and make all module
code use the pf_device field of struct fujitsu_laptop instead.
Suggested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The platform device registered by fujitsu-laptop is registered
unconditionally while sysfs attributes attached to it depend on the
FUJ02E3 ACPI device being present. Fix this by moving platform device
creation and removal to acpi_fujitsu_laptop_add() and
acpi_fujitsu_laptop_remove(), respectively.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Platform device handling adds a lot of complexity to fujitsu_init(),
which hinders its readability. Extract code responsible for adding and
removing the platform device to separate functions. Adjust whitespace
to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Use the DEVICE_ATTR_RO() macro to get rid of ignore_store() and shorten
attribute definitions. Adjust whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Setting backlight level using a vendor-specific interface should only be
possible when using the latter is either explicitly requested by the
user or automatically selected by the kernel. fujitsu-laptop violates
that premise by unconditionally attaching three backlight-related
attributes to the platform device it registers. Remove the offending
attributes from the platform device. Update module comments to reflect
this change.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Otherwise those are printed several times when (un)plugging the AC
connector.
Signed-off-by: Pau Espin Pedrol <pespin.shar@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This was broken in commit cd979883b9 ("xen/acpi-processor:
fix enabling interrupts on syscore_resume"). do_suspend (from
xen/manage.c) and thus xen_resume_notifier never get called on
the initial-domain at resume (it is if running as guest.)
The rationale for the breaking change was that upload_pm_data()
potentially does blocking work in syscore_resume(). This patch
addresses the original issue by scheduling upload_pm_data() to
execute in workqueue context.
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: stable@vger.kernel.org
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
On a randconfig build without CONFIG_SCSI_LPFC_DEBUG_FS, I ran into
multiple compile failures:
drivers/scsi/lpfc/lpfc_debugfs.h: In function 'lpfc_debug_dump_wq':
drivers/scsi/lpfc/lpfc_debugfs.h:405:15: error: 'DUMP_FCP' undeclared (first use in this function); did you mean 'DUMP_VAR'?
drivers/scsi/lpfc/lpfc_debugfs.h:405:15: note: each undeclared identifier is reported only once for each function it appears in
drivers/scsi/lpfc/lpfc_debugfs.h:408:22: error: 'DUMP_NVME' undeclared (first use in this function); did you mean 'DUMP_NONE'?
drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_ls_rsp_cmp':
drivers/scsi/lpfc/lpfc_nvmet.c:109:2: error: implicit declaration of function 'lpfc_nvmeio_data'; did you mean 'lpfc_mem_free'? [-Werror=implicit-function-declaration]
drivers/scsi/lpfc/lpfc_nvmet.c: In function 'lpfc_nvmet_xmt_fcp_op':
drivers/scsi/lpfc/lpfc_nvmet.c:523:10: error: unused variable 'id' [-Werror=unused-variable]
They are all trivial to fix, so I'm doing it in a combined patch here.
Fixes: 1d9d5a9879 ("scsi: lpfc: refactor debugfs queue dump routines")
Fixes: bd2cdd5e40 ("scsi: lpfc: NVME Initiator: Add debugfs support")
Fixes: 2b65e18202 ("scsi: lpfc: NVME Target: Add debugfs support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
lpfc cannot establish connection with targets that send PRLI in P2P
configurations.
If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.
[mkp: applied by hand]
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>