Commit graph

693,635 commits

Author SHA1 Message Date
Arnd Bergmann
f13d52cb3f arm64: define BUG() instruction without CONFIG_BUG
This mirrors commit e9c38ceba8 ("ARM: 8455/1: define __BUG as
asm(BUG_INSTR) without CONFIG_BUG") to make the behavior of
arm64 consistent with arm and x86, and avoids lots of warnings in
randconfig builds, such as:

kernel/seccomp.c: In function '__seccomp_filter':
kernel/seccomp.c:666:1: error: no return statement in function returning non-void [-Werror=return-type]

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-03-22 17:21:37 +00:00
Rob Herring
0f11736df6 ARM: dts: bcm: fix msi-controller name and unit address
The unit address for the msi controller is not valid as there is no reg
property, so remove it. Also, msi-controller is the preferred node name.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-22 10:15:19 -07:00
Jon Mason
f0c0cb99f7 arm64: dts: NS2: Add dma-coherent to relevant DT entries
Cache related issues with DMA rings and performance issues related to
caching are being caused by not properly setting the "dma-coherent" flag
in the device tree entries.  Adding it here to correct the issue.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: fd5e5dd56 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2")
Fixes: dddc3c9d7 ("arm64: dts: NS2: add AMAC ethernet support")
Fixes: e79249143 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver")
Fixes: ac9aae00f ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Fixes: efc877676 ("arm64: dts: Add SDHCI DT node for NS2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-22 10:14:14 -07:00
Andy Yan
7e2a9035c1 clk: rockchip: rename RK1108 to RV1108
Rockchip finally named the SOC as RV1108, so change it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>

[include rename in rk1108.dtsi to prevent compile errors]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-22 18:03:04 +01:00
Andy Yan
b61753a4c4 dt-bindings: rk1108-cru: rename RK1108 to RV1108
Rockchip finally named the SOC as RV1108, so change it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-22 18:02:57 +01:00
Shawn Lin
41b464ef10 arm64: dts: rockchip: fix PCIe domain number for rk3399
It's suggested to fix the domain number for all PCIe
host bridges or not set it at all. However, if we don't
fix it, the domain number will keep increasing ever when
doing unbind/bind test, which makes the bus tree of lspci
introduce pointless domain hierarchy. More investigation shows
the domain number allocater of PCI doesn't consider the conflict
of domain number if we have more than one PCIe port belonging to
different domains. So once unbinding/binding one of them and keep
others would going to overflow the domain number so that finally
it will share the same domain as others, but actually it shouldn't.
We should fix the domain number for PCIe or invent new indexing
ID mechanisms. However it isn't worth inventing new indexing ID
mechanisms personlly, Just look at how other Root Complex drivers
did, for instance, broadcom and qualcomm, it seems fixing the domain
number was more popular. So this patch gonna fix the domain number
of PCIe for rk3399.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-22 17:50:09 +01:00
Rafał Miłecki
3a599e0dbc ARM: dts: BCM53573: Specify serial console parameters
This adds baud rate, parity & number of data bits. It's required to get
serial working correctly.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-22 09:48:52 -07:00
Rafał Miłecki
5be82d0475 ARM: dts: BCM5301X: Specify serial console params in dtsi files
So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.

Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-22 09:48:24 -07:00
Tony Lindgren
7a9b248446 ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB
controller.

Let's add a configuration for the HCI so the modems can be enabled.

Note that the modems still need additional GPIO based configuration.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
[tony@atomide.com: left out url]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:09:23 -07:00
Sebastian Reichel
836a0b0bb9 ARM: dts: motorola-cpcap-mapphone: add LEDs
Add LEDs.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:09:16 -07:00
Tony Lindgren
d9bed14479 ARM: dts: omap4-droid4: Add LCD
The LCD panel on droid 4 is a command mode LCD. The binding follows
the standard omapdrm binding and the changes needed for omapdrm command
mode panels are posted separately.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:08:12 -07:00
Tony Lindgren
50cdcc0b01 ARM: dts: omap4-droid4: Add HDMI support
We can get HDMI working as long as the 5V regulator is on. There is
probably an encoder chip there too, but so far no idea what it might be.
Let's keep the 5V HDMI regulator always enabled for now as otherwise we
cannot detect the monitor properly.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:07:28 -07:00
Tony Lindgren
fdec8edbbe ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4
Add tmp105 sensor for droid 4. This can be used with modprobe
lm75.ko and running sensors from lm-sensors package. Note that
the lm75.c driver does not yet support alert interrupt but
droid 4 seems to be wired for it.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:07:10 -07:00
Tony Lindgren
9946f937d4 ARM: dts: omap4-droid4: Add GPIO poweroff
Droid 4 has a GPIO line that we can use with CONFIG_POWER_RESET_GPIO.
It is probably connected to the CPCAP PMIC, and seems to power down
the whole device taking power consumption to zero based on what
I measured.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:06:37 -07:00
Tony Lindgren
771e4feb27 ARM: dts: omap4-droid4: Add LCD backlight
The TI LMU driver has not yet been merged, but the device
tree binding for TI LMU drivers has been acked already
earlier by Rob Herring <robh+dt@kernel.org>. So it should
be safe to apply to cut down the number of pending patches.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-22 09:03:43 -07:00
Alexander Kochetkov
94bbdd7724 ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
This commit enable DMA-based transfers for SD/eMMC card adapters
and reduce number of interrupts produced by SD-card/eMMC-card
adapters.

Sometimes interrupts from SD-card/eMMC-card adapters running in
PIO mode blocks execution of hrtimers and I2S DMA callbacks for
a long periods (100 ms or more).

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
[moved dma properties to rk3xxx.dtsi and added sdio dma]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-22 16:49:39 +01:00
Neeraj Upadhyay
afd0e5a876 arm64: kaslr: Fix up the kernel image alignment
If kernel image extends across alignment boundary, existing
code increases the KASLR offset by size of kernel image. The
offset is masked after resizing. There are cases, where after
masking, we may still have kernel image extending across
boundary. This eventually results in only 2MB block getting
mapped while creating the page tables. This results in data aborts
while accessing unmapped regions during second relocation (with
kaslr offset) in __primary_switch. To fix this problem, round up the
kernel image size, by swapper block size, before adding it for
correction.

For example consider below case, where kernel image still crosses
1GB alignment boundary, after masking the offset, which is fixed
by rounding up kernel image size.

SWAPPER_TABLE_SHIFT = 30
Swapper using section maps with section size 2MB.
CONFIG_PGTABLE_LEVELS = 3
VA_BITS = 39

_text  : 0xffffff8008080000
_end   : 0xffffff800aa1b000
offset : 0x1f35600000
mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1)

(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT  = 0x3fffffe7d

offset after existing correction (before mask) = 0x1f37f9b000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT  = 0x3fffffe7d

offset (after mask) = 0x1f37e00000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c
(_end + offset) >> SWAPPER_TABLE_SHIFT  = 0x3fffffe7d

new offset w/ rounding up = 0x1f38000000
(_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d
(_end + offset) >> SWAPPER_TABLE_SHIFT  = 0x3fffffe7d

Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-22 15:43:11 +00:00
Robin Murphy
273df96353 iommu/dma: Make PCI window reservation generic
Now that we're applying the IOMMU API reserved regions to our IOVA
domains, we shouldn't need to privately special-case PCI windows, or
indeed anything else which isn't specific to our iommu-dma layer.
However, since those aren't IOMMU-specific either, rather than start
duplicating code into IOMMU drivers let's transform the existing
function into an iommu_get_resv_regions() helper that they can share.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 16:18:59 +01:00
Robin Murphy
7c1b058c8b iommu/dma: Handle IOMMU API reserved regions
Now that it's simple to discover the necessary reservations for a given
device/IOMMU combination, let's wire up the appropriate handling. Basic
reserved regions and direct-mapped regions we simply have to carve out
of IOVA space (the IOMMU core having already mapped the latter before
attaching the device). For hardware MSI regions, we also pre-populate
the cookie with matching msi_pages. That way, irqchip drivers which
normally assume MSIs to require mapping at the IOMMU can keep working
without having to special-case their iommu_dma_map_msi_msg() hook, or
indeed be aware at all of quirks preventing the IOMMU from translating
certain addresses.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 16:18:59 +01:00
Robin Murphy
938f1bbe35 iommu/dma: Don't reserve PCI I/O windows
Even if a host controller's CPU-side MMIO windows into PCI I/O space do
happen to leak into PCI memory space such that it might treat them as
peer addresses, trying to reserve the corresponding I/O space addresses
doesn't do anything to help solve that problem. Stop doing a silly thing.

Fixes: fade1ec055 ("iommu/dma: Avoid PCI host bridge windows")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 16:18:59 +01:00
Robin Murphy
9d3a4de4cb iommu: Disambiguate MSI region types
The introduction of reserved regions has left a couple of rough edges
which we could do with sorting out sooner rather than later. Since we
are not yet addressing the potential dynamic aspect of software-managed
reservations and presenting them at arbitrary fixed addresses, it is
incongruous that we end up displaying hardware vs. software-managed MSI
regions to userspace differently, especially since ARM-based systems may
actually require one or the other, or even potentially both at once,
(which iommu-dma currently has no hope of dealing with at all). Let's
resolve the former user-visible inconsistency ASAP before the ABI has
been baked into a kernel release, in a way that also lays the groundwork
for the latter shortcoming to be addressed by follow-up patches.

For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use
IOMMU_RESV_MSI to describe the hardware type, and document everything a
little bit. Since the x86 MSI remapping hardware falls squarely under
this meaning of IOMMU_RESV_MSI, apply that type to their regions as well,
so that we tell the same story to userspace across all platforms.

Secondly, as the various region types require quite different handling,
and it really makes little sense to ever try combining them, convert the
bitfield-esque #defines to a plain enum in the process before anyone
gets the wrong impression.

Fixes: d30ddcaa7b ("iommu: Add a new type field in iommu_resv_region")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: kvm@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 16:16:17 +01:00
Anton Sviridenko
6e4c8480bd [media] solo6x10: release vb2 buffers in solo_stop_streaming()
Fixes warning that appears in dmesg after closing V4L2 userspace
application that plays video from the display device
(first device from V4L2 device nodes provided by solo, usually /dev/video0
when no other V4L2 devices are present). Encoder device nodes are not
affected. Can be reproduced by starting and closing

ffplay -f video4linux2  /dev/video0

[ 8130.281251] ------------[ cut here ]------------
[ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230
[ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
[ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G           O    4.10.0-gentoo #1
[ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015
[ 8130.281265] Call Trace:
[ 8130.281267]  dump_stack+0x4f/0x72
[ 8130.281270]  __warn+0xc7/0xf0
[ 8130.281271]  warn_slowpath_null+0x18/0x20
[ 8130.281272]  __vb2_queue_cancel+0x14b/0x230
[ 8130.281273]  vb2_core_streamoff+0x23/0x90
[ 8130.281275]  vb2_streamoff+0x24/0x50
[ 8130.281276]  vb2_ioctl_streamoff+0x3d/0x50
[ 8130.281278]  v4l_streamoff+0x15/0x20
[ 8130.281279]  __video_do_ioctl+0x25e/0x2f0
[ 8130.281280]  video_usercopy+0x279/0x520
[ 8130.281282]  ? v4l_enum_fmt+0x1330/0x1330
[ 8130.281285]  ? unmap_region+0xdf/0x110
[ 8130.281285]  video_ioctl2+0x10/0x20
[ 8130.281286]  v4l2_ioctl+0xce/0xe0
[ 8130.281289]  do_vfs_ioctl+0x8b/0x5b0
[ 8130.281290]  ? __fget+0x72/0xa0
[ 8130.281291]  SyS_ioctl+0x74/0x80
[ 8130.281294]  entry_SYSCALL_64_fastpath+0x13/0x94
[ 8130.281295] RIP: 0033:0x7ff86fee6b27
[ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27
[ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006
[ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140
[ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000
[ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228
[ 8130.281300] ---[ end trace 00695dc96be646e7 ]---

Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:57:31 -03:00
Bartosz Golaszewski
31a32d7463 [media] media: dt-bindings: vpif: extend the example with an output port
This makes the example more or less correspond with the da850-evm
hardware setup.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:56:57 -03:00
Bartosz Golaszewski
47cd34488f [media] media: dt-bindings: vpif: fix whitespace errors
The examples have been copied from the DT with whitespace errors. Fix
them.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:56:27 -03:00
Bartosz Golaszewski
a16cb91ad9 [media] media: vpif: use a configurable i2c_adapter_id for vpif display
The vpif display driver uses a static i2c adapter ID of 1 but on the
da850-evm board in DT boot mode the i2c adapter ID is actually 0.

Make the adapter ID configurable like it already is for vpif capture.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:55:56 -03:00
Javier Martinez Canillas
28af1325e1 [media] soc-camera: ov5642: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:54:29 -03:00
Thierry Reding
21aff52ab2 iommu: Add dummy implementations for !IOMMU_IOVA
Currently, building code which uses the API guarded by the IOMMU_IOVA
will fail to link if IOMMU_IOVA is not enabled. Often this code will be
using the API provided by the IOMMU_API Kconfig symbol, but support for
this can be optional, with code falling back to contiguous memory. This
commit implements dummy functions for the IOVA API so that it can be
compiled out.

With both IOMMU_API and IOMMU_IOVA optional, code can now be built with
or without support for IOMMU without having to resort to #ifdefs in the
user code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:54:07 +01:00
Thierry Reding
82df0a4368 MAINTAINERS: Add related headers to IOMMU section
The linux/iommu.h and linux/iova.h headers belong to the IOMMU subsystem
but scripts/get_maintainers.pl currently fails to assign them because
they aren't listed in MAINTAINERS.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:54:07 +01:00
Marek Szyprowski
cd37a296a9 iommu/exynos: Workaround FLPD cache flush issues for SYSMMU v5
For some unknown reasons, in some cases, FLPD cache invalidation doesn't
work properly with SYSMMU v5 controllers found in Exynos5433 SoCs. This
can be observed by a firmware crash during initialization phase of MFC
video decoder available in the mentioned SoCs when IOMMU support is
enabled. To workaround this issue perform a full TLB/FLPD invalidation
in case of replacing any first level page descriptors in case of SYSMMU v5.

Fixes: 740a01eee9 ("iommu/exynos: Add support for v5 SYSMMU")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:50:45 +01:00
Marek Szyprowski
7d2aa6b814 iommu/exynos: Block SYSMMU while invalidating FLPD cache
Documentation specifies that SYSMMU should be in blocked state while
performing TLB/FLPD cache invalidation, so add needed calls to
sysmmu_block/unblock.

Fixes: 66a7ed84b3 ("iommu/exynos: Apply workaround of caching fault page table entries")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:50:32 +01:00
Andy Shevchenko
61012985eb iommu/vt-d: Use lo_hi_readq() / lo_hi_writeq()
There is already helper functions to do 64-bit I/O on 32-bit machines or
buses, thus we don't need to reinvent the wheel.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:42:17 +01:00
Andy Shevchenko
f9808079aa iommu/dmar: Remove redundant ' != 0' when check return code
Usual pattern when we check for return code, which might be negative
errno, is either (ret) or (!ret).

Remove extra ' != 0' from condition.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:42:17 +01:00
Andy Shevchenko
3f6db6591a iommu/dmar: Remove redundant assignment of ret
There is no need to assign ret to 0 in some cases. Moreover it might
shadow some errors in the future.

Remove such assignments.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:42:17 +01:00
Andy Shevchenko
4a8ed2b819 iommu/dmar: Return directly from a loop in dmar_dev_scope_status()
There is no need to have a temporary variable.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:42:17 +01:00
Andy Shevchenko
8326c5d205 iommu/dmar: Rectify return code handling in detect_intel_iommu()
There is inconsistency in return codes across the functions called from
detect_intel_iommu().

Make it consistent and propagate return code to the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22 15:42:17 +01:00
Frank Schaefer
9e00695364 [media] em28xx: reduce stack usage in sensor probing functions
It's no longer necessary to keep the i2c_client in the device struct
unmodified until a sensor is found, so reduce stack usage in
em28xx_probe_sensor_micron() and em28xx_probe_sensor_omnivision() by using
a pointer to the client instead of a local copy.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:38:38 -03:00
Sakari Ailus
3b8b2e1cea [media] docs-rst: media: Push CEC documentation under CEC section
The CEC documentation added two sections on the main media kAPI level.
There should be only one.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:37:49 -03:00
Fengguang Wu
c7423b7263 [media] vcodec: mediatek: fix platform_no_drv_owner.cocci warnings
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1296:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:37:07 -03:00
Laurent Pinchart
73a0159920 [media] v4l: soc-camera: Remove videobuf1 support
All remaining soc-camera drivers use videobuf2, drop support for
videobuf1.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: also drop 'select VIDEOBUF_GEN' from Kconfig]

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:27:24 -03:00
Wu-Cheng Li
e8a2a41ee2 [media] mtk-vcodec: check the vp9 decoder buffer index from VPU
VPU firmware has a bug and may return invalid buffer index for
some vp9 videos. Check the buffer indexes before accessing the
buffer.

Signed-off-by: Wu-Cheng Li <wuchengli@chromium.org>
Acked-by: Tiffany Lin <Tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:26:47 -03:00
Randy Dunlap
586fd40106 [media] media/platform/mtk-jpeg: add slab.h to fix build errors
Include <linux/slab.h> to fix these build errors:

../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c: In function 'mtk_jpeg_open':
../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1017:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]
  ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1017:6: warning: assignment makes pointer from integer without a cast [enabled by default]
  ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
../drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1047:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
  kfree(ctx);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com>
Cc: Rick Chang <rick.chang@mediatek.com>
Cc: Bin Liu <bin.liu@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:24:40 -03:00
Javier Martinez Canillas
4e42e5f2f5 [media] si4713: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:23:58 -03:00
Wei Yongjun
3876420a88 [media] mtk-vcodec: remove redundant return value check of platform_get_resource()
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:23:20 -03:00
Sebastian Reichel
db0f4691d9 [media] v4l: Allow calling v4l2_device_register_subdev_nodes() multiple times
Previously multiple calls to v4l2_device_register_subdev_nodes() ended up
corrupting memory and leaking some, too. This patch changes the behaviour so
that sub-devices the device nodes of which are already registered are
ignored.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:21:43 -03:00
Sakari Ailus
974f4a385c [media] docs-rst: media: Explicitly refer to sub-sampling in scaling documentation
Skipping, which is sometimes used in terminology related to sensors when
referring to sub-sampling is replaced by more suitable sub-sampling
instead. Skipping is retained in a note in parentheses.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:18:41 -03:00
Javier Martinez Canillas
5ace69341c [media] et8ek8: Export OF device ID as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Before this patch:

$ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias
alias:          i2c:et8ek8

After this patch:

$ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias
alias:          i2c:et8ek8
alias:          of:N*T*Ctoshiba,et8ek8C*
alias:          of:N*T*Ctoshiba,et8ek8

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:18:05 -03:00
Hans Verkuil
a8e97e531a [media] cec: don't Feature Abort msgs from Unregistered
Feature Abort shouldn't be sent in reply to messages from Unregistered,
since that would make it a broadcast message.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:15:55 -03:00
Hans Verkuil
79cabaa320 [media] cec: log reason for returning -EINVAL
When validating the struct cec_s_log_addrs input a debug message is printed
for all except two of the 'return -EINVAL' paths.

Also log the reason for the missing two paths.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:15:23 -03:00
Hans Verkuil
25c2107896 [media] cec: improve cec_transmit_msg_fh logging
Several error paths didn't log why an error was returned. Add this.

Also handle the corner case of "adapter is unconfigured AND the message
is from Unregistered to TV AND reply is non-zero" separately and return
EINVAL in that case, since it really is an invalid value and not an
unconfigured CEC device.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:14:45 -03:00
Hans Verkuil
5a137df1d6 [media] cec: use __func__ in log messages
The hardcoded function name is actually wrong. Use __func__ instead.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:13:58 -03:00