Unfortunately the HWMON_T_ALARM define was missing,
although the associated entry was present in hwmon_temp_attributes.
This is needed to convert drivers to the new interface which use channel
based alarms.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
IT8705F is known to respond on both SIO addresses. Registering it twice
may result in system lockups.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: e84bd9535e ("hwmon: (it87) Add support for second Super-IO chip")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Traced fans not spinning to incorrect PWM value being written.
The passed in value was written instead of the calulated value.
Fixes: 54187ff9d7 ("hwmon: (max31790) Convert to use new hwmon registration API")
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The OPP are declared as shared but no operating points are declared for
cpu1, 2 and 3. Thus, the following error happens during the boot:
cpu cpu1: dev_pm_opp_of_get_sharing_cpus: Couldn't find tcpu_dev node.
This patch applies the operating points to each cpu of the A33.
Fixes: 03749eb88e ("ARM: dts: sun8i: add opp-v2 table for A33")
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds a new system call to enable the use of guarded storage for
user space processes. The system call takes two arguments, a command
and pointer to a guarded storage control block:
s390_guarded_storage(int command, struct gs_cb *gs_cb);
The second argument is relevant only for the GS_SET_BC_CB command.
The commands in detail:
0 - GS_ENABLE
Enable the guarded storage facility for the current task. The
initial content of the guarded storage control block will be
all zeros. After the enablement the user space code can use
load-guarded-storage-controls instruction (LGSC) to load an
arbitrary control block. While a task is enabled the kernel
will save and restore the current content of the guarded
storage registers on context switch.
1 - GS_DISABLE
Disables the use of the guarded storage facility for the current
task. The kernel will cease to save and restore the content of
the guarded storage registers, the task specific content of
these registers is lost.
2 - GS_SET_BC_CB
Set a broadcast guarded storage control block. This is called
per thread and stores a specific guarded storage control block
in the task struct of the current task. This control block will
be used for the broadcast event GS_BROADCAST.
3 - GS_CLEAR_BC_CB
Clears the broadcast guarded storage control block. The guarded-
storage control block is removed from the task struct that was
established by GS_SET_BC_CB.
4 - GS_BROADCAST
Sends a broadcast to all thread siblings of the current task.
Every sibling that has established a broadcast guarded storage
control block will load this control block and will be enabled
for guarded storage. The broadcast guarded storage control block
is used up, a second broadcast without a refresh of the stored
control block with GS_SET_BC_CB will not have any effect.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The calculation of the global physical address (GPA) on UV4 is
incorrect. The gnode_extra/upper global offset should only be
applied for fixed address space systems (UV1..3).
Tested-by: John Estabrook <john.estabrook@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: John Estabrook <estabrook@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170321231646.667689538@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pgprot_dmachoerent() is not defined on every architecture. Having
COMPILE_TEST set for the driver causes it to be compiled on
architectures which do not have pgprot_dmachoerent():
drivers/misc/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_mmap':
drivers/misc/aspeed-lpc-ctrl.c:51:9: error: implicit declaration of
function 'pgprot_dmacoherent' [-Werror=implicit-function-declaration]
prot = pgprot_dmacoherent(prot);
There are two possible solutions:
1. Remove COMPILE_TEST to ensure the driver is only compiled on ARM
2. Use pgprot_noncached() instead of pgprot_dmachoerent()
The first option results in less compile testing of the LPC control
driver which is undesirable.
The second option uses a function that is declared on all architectures
and therefore should always build. Currently there is no practical
difference between pgprot_noncached() and pgprot_dmachoerent() for the
aspeed chips that this driver is compatible with. The reason for
pgprot_dmachoerent() was that there may be chips made at some point in
the future that could include hardware that pgprot_dmachoerent() could
optimise for. As none of this hardware has even been announced there
isn't really a need for pgprot_dmachoerent().
Using pgprot_noncached() is completely correct and optimal for all
existing hardware on which the LPC control driver will run.
This commit also addresses that phys_addr_t should be printed using %pap
rather than %x:
In file included from include/linux/miscdevice.h:6:0,
from drivers/misc/aspeed-lpc-ctrl.c:11:
drivers/misc/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_probe':
drivers/misc/aspeed-lpc-ctrl.c:232:17: warning: format '%x' expects
argument of type 'unsigned int', but argument 3 has type 'phys_addr_t
{aka long long unsigned int}' [-Wformat=]
dev_info(dev, "Loaded at 0x%08x (0x%08x)\n",
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In my previous Commit ab9da627906a ("drm/i915: make context status
notifier head be per engine") rely on scheduler->current_workload[x]
to distinguish gvt spacial request from i915 request. But this is
not always true since no synchronization between workload_thread and
lrc irq handler.
lrc irq handler workload_thread
---- ----
pick i915 requests;
intel_vgpu_submit_execlist();
current_workload[x] = xxx;
shadow_context_status_change();
Then current_workload[x] is not null but current request is of i915 self.
So instead we check ctx flag CONTEXT_FORCE_SINGLE_SUBMISSION. Only gvt
request set this flag and always set.
v2: Reverse the order of multi-condition 'if' statement.
Fixes: ab9da6279 ("drm/i915: make context status notifier head be per engine")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The memory size of f2fs_stat_info also should be calculated.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After filemap_write_and_wait_range fail, the FI_ATOMIC_FILE flags is removed,
so that f2fs should not increase the stat of atomic_write.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The crc_offset towards or beyond the end of block is wrong,
sanity check it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As discuss with Jaegeuk and Chao,
"Once checkpoint is done, f2fs doesn't need to update there-in filename at all."
The disk-level filename is used only one case,
1. create a file A under a dir
2. sync A
3. godown
4. umount
5. mount (roll_forward)
Only the rename/cross_rename changes the filename, if it happens,
a. between step 1 and 2, the sync A will caused checkpoint, so that,
the roll_forward at step 5 never happens.
b. after step 2, the roll_forward happens, file A will roll forward
to the result as after step 1.
So that, any updating the disk filename is useless, just cleanup it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
free_nid_bitmap and free_nid_count in update_free_nid_bitmap should be
updated atomically, use nid_list_lock cover them to avoid race in
concurrent scenario.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For f2fs_read_data_pages, the f2fs_mpage_readpages gets "page == NULL",
so that, the prefetchw(&page->flags) is operated on NULL.
Fixes: f1e8866016 ("f2fs: expose f2fs_mpage_readpages")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Clear FI_DATA_EXIST flag atomically in truncate_inline_inode, and
the return value from truncate_inline_inode isn't used, remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's needless of mnt_want_write_file for arguments checking.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The inode_newsize_ok is better than only checking the maxbytes,
eg. the rlimit etc.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If move file range return error, the data copied to user-space is duplicate.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
use a slightly simpler expression to calculate nat block with nid.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch checks the parameter range passed by ioctl to void that range
exceeds the max_file_blocks limit.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a function to punch discard command if one segment
reuse before discard. Split this segment from multi-segments discard
range, and discard the left bigger range.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fixes: 3cf4574705 ("f2fs: introduce get_next_page_offset to speed up SEEK_DATA")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The nat entry is listed from the set list for freeing,
it's duplicate to do radix tree lookup again.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
[Jaegeuk Kim: remove unnecessary f2fs_bug_on]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The root device's issue flush trace is missing,
add it and tracing the result from submit.
Fixes d50aaeec90 ("f2fs: show actual device info in tracepoints")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now f2fs only supports volatile writes for journal db regular file.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This gets qmicli working with the MDM6600 modem.
Cc: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz says:
====================
qed: IOV related clenaups
This patch series targets IOV functionality [on both PF and VF].
Patches #2, #3 and #5 fix flows relating to malicious VFs, either by
upgrading and aligning current safe-guards or by correcing racy flows.
Patches #1 and #8 make some malicious/dysnfunctional VFs logging appear
by default in logs.
The rest of the patches either cleanup the existing code or else correct
some possible [yet fairly insignicant] issues in VF behavior.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The link information exists only on the leading hwfn,
but some of its derivatives [e.g., min/max rate] need to
be configured for each hwfn.
When re-basing the VF link view, use the leading hwfn
information as basis for all existing hwfns to allow
said configurations to stick.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Malicious VF existance should be interesting enough for the
hyperuser. Change the PF indication that one of its child VF
became malicious to appear by default.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF<->VF interface allows for the VF to request
multiple queues closure via a single message, but this has
never been used by any official driver.
We now deprecate this option, forcing each queue close
to arrive via a different command; This would be required
for future TLVs that are going to extend the queue TLVs with
additional information on a per-queue basis.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PF needs to validate the status of VF queues before asking firmware
to configure anything for them, but that validation is done in various
different forms - sometimes inadequate.
Add auxillary functions that can be used for testing of the queue
state and convert the various flows to use those instead of current
existing flows; Also, add missing validations where needed.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When starting the VF's vport, the PF would first configure
the status blocks of the VF and then reset them.
That would cause some of the configured information to be lost -
specifically it would mean that all the VFs queues would use
the Rx coalescing state-machine of the status block.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When PF responds to the VF requests it also cleans the HW-channel
indication in firmware to allow further VF messages to arrive,
but the order currently applied is wrong -
The PF is copying by DMAE the response the VF is polling on for
completion, and only afterwards sets the HW-channel to ready state.
This creates a race condition where the VF would be able to send
an additional message to the PF before the channel would get ready
again, causing the firmware to consider the VF as malicious.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VF is considered malicious, driver handling of the VF
FLR flow would clean said indication - but not if the FLR is
part of an sriov-disable flow.
That leads to further issues, as PF wouldn't re-enable the
previously malicious VF when sriov is re-enabled.
No reason for that - simply clean malicious indications in
the sriov-disable flow as well.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VFs are currently logging errors when communicating
with their PFs in a too-low verbosity that wouldn't
be shown by default. As timeouts and failed commands
are crucial for VF operability, make them appear by
default.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge of 'linux-kselftest-4.11-rc1':
1. Partially removed use of 'test_objs' target, breaking force rebuild of
BPFOBJ, introduced in commit d498f8719a ("bpf: Rebuild bpf.o for any
dependency update").
Update target so dependency on BPFOBJ is restored.
2. Introduced commit 2047f1d8ba ("selftests: Fix the .c linking rule")
which fixes order of LDLIBS.
Commit d02d8986a7 ("bpf: Always test unprivileged programs") added
libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of
test_verifier.
3. Introduced commit d83c3ba0b9 ("selftests: Fix selftests build to
just build, not run tests").
Reordering the Makefile allows us to remove the 'all' target.
Tested both:
selftests/bpf$ make
and
selftests$ make TARGETS=bpf
on Ubuntu 16.04.2.
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled
while packets are collected on the error queue.
So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags
is not enough to safely assume that the skb contains
OPT_STATS data.
Add a bit in sock_exterr_skb to indicate whether the
skb contains opt_stats data.
Fixes: 1c885808e4 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Reported-by: JongHwan Kim <zzoru007@gmail.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__sock_recv_timestamp can be called for both normal skbs (for
receive timestamps) and for skbs on the error queue (for transmit
timestamps).
Commit 1c885808e4
(tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING)
assumes any skb passed to __sock_recv_timestamp are from
the error queue, containing OPT_STATS in the content of the skb.
This results in accessing invalid memory or generating junk
data.
To fix this, set skb->pkt_type to PACKET_OUTGOING for packets
on the error queue. This is safe because on the receive path
on local sockets skb->pkt_type is never set to PACKET_OUTGOING.
With that, copy OPT_STATS from a packet, only if its pkt_type
is PACKET_OUTGOING.
Fixes: 1c885808e4 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Reported-by: JongHwan Kim <zzoru007@gmail.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>