Commit graph

693,635 commits

Author SHA1 Message Date
Daniel Vetter
098899fee6 drm/vgem: switch to postclose
I didn't spot anything that would require ordering here (well not
anywhere else either), and I'm trying to unify at least modern drivers
on one close hook.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-18-daniel.vetter@ffwll.ch
2017-03-14 14:38:33 +01:00
Daniel Vetter
b93658f83f drm/doc: Document drm_file.[hc]
Well, mostly drm_file.h, and clean up all related things:

- I didnt' figure out the difference between preclose and postclose.
  The existing explanation in drm-internals.rst didn't convince me,
  since it's also really outdated - we clean up pending DRM events in
  the core nowadays. I put a FIXME in for the future.

- Another FIXME is to have a macro for default fops.

- Lots of links all around, main areas are to tie the overview in
  drm_file.c more into the callbacks in struct drm_device, and the
  other is to link render/primary node code to the right sections in
  drm-uapi.rst.

- Also moved the open/close stuff to drm_drv.h from drm-internals.rst,
  seems like the better place for that information. Since that section
  was rather outdated this amounted to full-on rewrite.

A big missing piece here is some overview graph, but I think better to
wait with that one until drm_device and drm_driver are also fully
documented.

v2: Nits from Sean.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-12-daniel.vetter@ffwll.ch
2017-03-14 14:38:33 +01:00
Daniel Vetter
7d52cb88c9 drm: Remove drm_pending_event->pid
We might as well dump the drm_file pointer, that's about as useful
a cookie as the pid. Noticed while typing docs for drm_file and friends.

Since the only consumer of this is the tracepoints I think we can safely
change this - those tracepoints should not be uapi relevant at all. It
all goes back to

commit b9c2c9ae88
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jul 1 16:48:09 2010 -0700

    drm: add per-event vblank event trace points

which doesn't give a special justification for using pid over a pointer.

Also note that the nouveau code setting it is entirely pointless:
Since this isn't a vblank event, it will never hit the vblank
tracepoints.

Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-11-daniel.vetter@ffwll.ch
2017-03-14 14:38:33 +01:00
Daniel Vetter
7d2ec88149 drm/i915: Merge pre/postclose hooks
There's really not a reason afaics that we can't just clean up
everything at the end, in the terminal postclose hook: Since this is
closing a file descriptor we know no one else can have a reference or
a thread doing something with that drm_file except the close code.
Ordering shouldn't matter, as long as we don't kfree before we clean
stuff up.

In the past this was more relevant when drivers still had to track and
clean up pending drm events, but that's all done by the core now.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch
2017-03-14 14:38:31 +01:00
Tamara Diaconita
9f02a486da Documentation: admin-guide: Fix typos
Fix typos in admin-guide directory.
Make documentation clear and grammatically correct.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-14 07:21:26 -06:00
Chris Wilson
1b2e5ea0b7 drm/i915: Always call i915_gem_reset_finish() following i915_gem_reset_prepare()
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.

Fixes: da9a796f54 ("drm/i915: Split GEM resetting into 3 phases")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit 8d613c539c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 15:07:38 +02:00
Jyri Sarha
11abbc9f39 drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
Touching HW while clocks are off is a serious error and for instance
breaks suspend functionality. After this patch tilcdc_crtc_update_fb()
always updates the primary plane's framebuffer pointer, increases fb's
reference count and stores vblank event. tilcdc_crtc_update_fb() only
writes the fb's DMA address to HW if the crtc is enabled, as
tilcdc_crtc_enable() takes care of writing the address on enable.

This patch also refactors the tilcdc_crtc_update_fb() a bit. Number of
subsequent small changes had made it almost unreadable. There should
be no other functional changes but checking the CRTC's enable
state. However, the locking goes a bit differently and some of the
redundant checks have been removed in this new version.

The enable_lock should be enough to protect the access to
tilcdc_crtc->enabled. The irq_lock protects the access to last_vblank
and next_fb. The check for vrefresh and last_vblank being valid is
redundant, as the vrefresh should be always valid if the CRTC is
enabled and now last_vblank should be too, because it is initialized
to current time when CRTC raster is enabled. If for some reason the
values are not correctly initialized the division by zero warning is
quite appropriate.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-03-14 14:28:58 +02:00
Jyri Sarha
abf8315f71 drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
Fix badly hardcoded return return value under fail-label. All goto
branches to the label set the "ret"-variable accordingly.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
2017-03-14 14:28:56 +02:00
Dan Carpenter
ee5cb7c465 drm: qxl: add missing return check
My static checker complains that "release" is uninitialized if
qxl_alloc_release_reserved() fails, so let's add a check for that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314075410.GB5984@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-03-14 11:54:20 +01:00
Gerd Hoffmann
43c2794022 drm: virtio: fix kmem_cache_alloc error check
kmem_cache_alloc returns NULL on error, not ERR_PTR.

Fixes: f5985bf9ca
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489393346-13874-1-git-send-email-kraxel@redhat.com
2017-03-14 11:54:19 +01:00
Akinobu Mita
db6a3d03e2 dmaengine: xilinx: avoid memory corruption for device_prep_dma_memcpy()
The device_prep_dma_memcpy() callback for this driver allocates a new
xilinx_dma_tx_descriptor whose TX segments list is initialized as empty,
but then gets invalid TX segment pointer by list_last_entry() from the
empty TX segments list and memory corruption happens by the attempt to
update the next descriptor in invalid TX segment pointer.

This removes unnecessary memory access for nonexistent tail TX segment
which causes memory corruption.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-14 16:14:29 +05:30
Akinobu Mita
676f9c26c3 dmaengine: xilinx: fix device_terminate_all() callback for AXI CDMA
The device_terminate_all() callback for this driver stops current DMA
operations by clearing RUNSTOP bit in the control register and waiting
HALTED bit set in the status register.

But AXI CDMA which is one of the supported DMA engine by this driver
does not provide the run / stop controls and those bits in the control
and status registers are reserved.  So when device_terminate_all() is
called, the error message is printed and the channel is marked as having
errors in xilinx_dma_halt().

This change adds stop_transfer() callback which differentiates CDMA and
other DMA engine.  The CDMA's one avoids the unsupported operations and
instead polls the status register to check if the DMA operations are in
progress for AXI CDMA.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-14 16:14:29 +05:30
Chris Wilson
8f68d591d4 drm/i915: Stop using RP_DOWN_EI on Baytrail
On Baytrail, we manually calculate busyness over the evaluation interval
to avoid issues with miscaluations with RC6 enabled. However, it turns
out that the DOWN_EI interrupt generator is completely bust - it
operates in two modes, continuous or never. Neither of which are
conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just
compute everything from the UP_EI which does seem to correspond to the
desired interval.

v2: Fixup gen6_rps_pm_mask() as well
v3: Inline vlv_c0_above() to combine the now identical elapsed
calculation for up/down and simplify the threshold testing

Fixes: 43cf3bf084 ("drm/i915: Improved w/a for rps on Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk
(cherry picked from commit e0e8c7cb6e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:29:43 +02:00
Kenneth Graunke
0f5418e564 drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.
This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.

Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags.  Kernel commit
72bfa19c8d apparently introduced the feature prematurely.  According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.

'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value.  This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.

These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.

On Gen8+, userspace can write these registers directly, achieving the
same effect.  On Gen6-7.5, it likely makes sense to extend the command
parser to support them.  I don't think anyone wants this on Gen4-5.

Based on a patch by Dave Gordon.

v3: Return -ENODEV for the getparam, as this is what we do for other
    obsolete features.  Suggested by Chris Wilson.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170433.26843-1-chris@chris-wilson.co.uk
(cherry picked from commit ef0f411f51)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:28:25 +02:00
Chris Wilson
35a3abfd19 drm/i915: Only enable hotplug interrupts if the display interrupts are enabled
In order to prevent accessing the hpd registers outside of the display
power wells, we should refrain from writing to the registers before the
display interrupts are enabled.

[    4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915]
[    4.740155] Unclaimed read from register 0x1e1110
[    4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers
[    4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384
[    4.740203] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[    4.740220] Call Trace:
[    4.740236]  dump_stack+0x4d/0x6f
[    4.740251]  __warn+0xc1/0xe0
[    4.740265]  warn_slowpath_fmt+0x4a/0x50
[    4.740281]  ? insert_work+0x77/0xc0
[    4.740355]  ? fwtable_write32+0x90/0x130 [i915]
[    4.740431]  __unclaimed_reg_debug+0x44/0x50 [i915]
[    4.740507]  fwtable_read32+0xd8/0x130 [i915]
[    4.740575]  i915_hpd_irq_setup+0xa5/0x100 [i915]
[    4.740649]  intel_hpd_init+0x68/0x80 [i915]
[    4.740716]  i915_driver_load+0xe19/0x1380 [i915]
[    4.740784]  i915_pci_probe+0x32/0x90 [i915]
[    4.740799]  pci_device_probe+0x8b/0xf0
[    4.740815]  driver_probe_device+0x2b6/0x450
[    4.740828]  __driver_attach+0xda/0xe0
[    4.740841]  ? driver_probe_device+0x450/0x450
[    4.740853]  bus_for_each_dev+0x5b/0x90
[    4.740865]  driver_attach+0x19/0x20
[    4.740878]  bus_add_driver+0x166/0x260
[    4.740892]  driver_register+0x5b/0xd0
[    4.740906]  ? 0xffffffffa0166000
[    4.740920]  __pci_register_driver+0x47/0x50
[    4.740985]  i915_init+0x5c/0x5e [i915]
[    4.740999]  do_one_initcall+0x3e/0x160
[    4.741015]  ? __vunmap+0x7c/0xc0
[    4.741029]  ? kmem_cache_alloc+0xcf/0x120
[    4.741045]  do_init_module+0x55/0x1c4
[    4.741060]  load_module+0x1f3f/0x25b0
[    4.741073]  ? __symbol_put+0x40/0x40
[    4.741086]  ? kernel_read_file+0x100/0x190
[    4.741100]  SYSC_finit_module+0xbc/0xf0
[    4.741112]  SyS_finit_module+0x9/0x10
[    4.741125]  entry_SYSCALL_64_fastpath+0x17/0x98
[    4.741135] RIP: 0033:0x7f8559a140f9
[    4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9
[    4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011
[    4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e
[    4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0
[    4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924

v2: Set dev_priv->display_irqs_enabled to true for all platforms other
than vlv/chv that manually control the display power domain.

Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170231.18633-1-chris@chris-wilson.co.uk
(cherry picked from commit 262fd485ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:27:20 +02:00
Chris Wilson
4565bf58d4 drm/i915: Disable engine->irq_tasklet around resets
When we restart the engines, and we have active requests, a request on
the first engine may complete and queue a request to the second engine
before we try to restart the second engine. That queueing of the
request may race with the engine to restart, and so may corrupt the
current state. Disabling the engine->irq_tasklet prevents the two paths
from writing into ELSP simultaneously (and modifyin the execlists_port[]
at the same time).

Include fixup 1d309634bc ("drm/i915: Kill the tasklet then disable")

Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Testcase: igt/gem_exec_fence/await-hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-3-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313165958.13970-2-chris@chris-wilson.co.uk
(cherry picked from commit 1f7b847d72)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:26:44 +02:00
Ville Syrjälä
ca0241a55f Revert "drm/i915: Ignore panel type from OpRegion on SKL"
This reverts commit bb10d4ec3b.

Since commit c8ebfad7a0 ("drm/i915: Ignore OpRegion panel type except
on select machines") we ignore the OpRegion panel type except for
specific machines (handled via a DMI match), so having SKL explicitly
excluded from using the OpRegion panel type is redundant. So let's
remove the SKL check.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308143334.21216-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:21:51 +02:00
Chris Wilson
da9a796f54 drm/i915: Split GEM resetting into 3 phases
Currently we do a reset prepare/finish around the call to reset the GPU,
but it looks like we need a later stage after the hw has been
reinitialised to allow GEM to restart itself. Start by splitting the 2
GEM phases into 3:

  prepare - before the reset, check if GEM recovered, then stop GEM

  reset - after the reset, update GEM bookkeeping

  finish - after the re-initialisation following the reset, restart GEM

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170208143033.11651-2-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313165958.13970-1-chris@chris-wilson.co.uk
(cherry picked from commit d802709313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-03-14 12:11:49 +02:00
Nicolas Ferre
60b89f1928 ARM: at91: pm: cpu_idle: switch DDR to power-down mode
On some DDR controllers, compatible with the sama5d3 one,
the sequence to enter/exit/re-enter the self-refresh mode adds
more constrains than what is currently written in the at91_idle
driver. An actual access to the DDR chip is needed between exit
and re-enter of this mode which is somehow difficult to implement.
This sequence can completely hang the SoC. It is particularly
experienced on parts which embed a L2 cache if the code run
between IDLE calls fits in it...

Moreover, as the intention is to enter and exit pretty rapidly
from IDLE, the power-down mode is a good candidate.

So now we use power-down instead of self-refresh. As we can
simplify the code for sama5d3 compatible DDR controllers,
we instantiate a new sama5d3_ddr_standby() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.1+
Fixes: 017b5522d5 ("ARM: at91: Add new binding for sama5d3-ddramc")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-14 11:09:50 +01:00
Andy Shevchenko
ff21378a32 gpiolib: Fix spelling of 'successful'
Remove extra 'l' in "successfull".

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14 10:51:28 +01:00
Dan Williams
6e9f44eaae USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
Add Quectel UC15, UC20, EC21, and EC25.  The EC20 is handled by
qcserial due to a USB VID/PID conflict with an existing Acer
device.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-14 10:42:51 +01:00
Lee Jones
0043c1dfbe serial: st-asc: Use new GPIOD API to obtain RTS pin
The commits mentioned below adapt the GPIO API to allow more information
to be passed directly through devm_get_gpiod_from_child() in the first
instance.  This facilitates the removal of subsequent calls, such as
gpiod_direction_output().  This patch firstly moves to utilise the new
API and secondly removes the now superfluous call do set the direction.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Also drop the header file dummies that only this driver was using]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14 10:36:41 +01:00
Bin Liu
bc1e215454 usb: musb: fix possible spinlock deadlock
The DSPS glue calls del_timer_sync() in its musb_platform_disable()
implementation, which requires the caller to not hold a lock. But
musb_remove() calls musb_platform_disable() will musb->lock held. This
could causes spinlock deadlock.

So change musb_remove() to call musb_platform_disable() without holds
musb->lock. This doesn't impact the musb_platform_disable implementation
in other glue drivers.

root@am335x-evm:~# modprobe -r musb-dsps
[  126.134879] musb-hdrc musb-hdrc.1: remove, state 1
[  126.140465] usb usb2: USB disconnect, device number 1
[  126.146178] usb 2-1: USB disconnect, device number 2
[  126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered
[  126.423943]
[  126.425525] ======================================================
[  126.431997] [ INFO: possible circular locking dependency detected ]
[  126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted
[  126.444852] -------------------------------------------------------
[  126.451414] modprobe/778 is trying to acquire lock:
[  126.456523]  (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0
[  126.464403]
[  126.464403] but task is already holding lock:
[  126.470511]  (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1
30 [musb_hdrc]
[  126.479965]
[  126.479965] which lock already depends on the new lock.
[  126.479965]
[  126.488531]
[  126.488531] the existing dependency chain (in reverse order) is:
[  126.496368]
[  126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}:
[  126.502968]        otg_timer+0x80/0xec [musb_dsps]
[  126.507990]        call_timer_fn+0xb4/0x390
[  126.512372]        expire_timers+0xf0/0x1fc
[  126.516754]        run_timer_softirq+0x80/0x178
[  126.521511]        __do_softirq+0xc4/0x554
[  126.525802]        irq_exit+0xe8/0x158
[  126.529735]        __handle_domain_irq+0x58/0xb8
[  126.534583]        __irq_usr+0x54/0x80
[  126.538507]
[  126.538507] -> #0 (((&glue->timer))){+.-...}:
[  126.544636]        del_timer_sync+0x40/0xd0
[  126.549066]        musb_remove+0x6c/0x130 [musb_hdrc]
[  126.554370]        platform_drv_remove+0x24/0x3c
[  126.559206]        device_release_driver_internal+0x14c/0x1e0
[  126.565225]        bus_remove_device+0xd8/0x108
[  126.569970]        device_del+0x1e4/0x308
[  126.574170]        platform_device_del+0x24/0x8c
[  126.579006]        platform_device_unregister+0xc/0x20
[  126.584394]        dsps_remove+0x14/0x30 [musb_dsps]
[  126.589595]        platform_drv_remove+0x24/0x3c
[  126.594432]        device_release_driver_internal+0x14c/0x1e0
[  126.600450]        driver_detach+0x38/0x6c
[  126.604740]        bus_remove_driver+0x4c/0xa0
[  126.609407]        SyS_delete_module+0x11c/0x1e4
[  126.614252]        __sys_trace_return+0x0/0x10

Fixes: ea2f35c01d ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: <stable@vger.kernel.org> #4.9+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:13:14 +08:00
Bin Liu
6b7ad49608 usb: musb: dsps: fix iounmap in error and exit paths
Cleanly iounmap the pointer in error and exit paths.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:13:14 +08:00
Bin Liu
0090114d33 usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
The CPPI 4.1 driver polls register to workaround the premature TX
interrupt issue, but it causes audio playback underrun when triggered in
Isoch transfers.

Isoch doesn't do back-to-back transfers, the TX should be done by the
time the next transfer is scheduled. So skip this polling workaround for
Isoch transfer.

Fixes: a655f481d8 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt")
Cc: <stable@vger.kernel.org> #4.1+
Reported-by: Alexandre Bailon <abailon@baylibre.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:13:14 +08:00
kbuild test robot
265ffed739 drm/tinydrm: fix semicolon.cocci warnings
drivers/gpu/drm/tinydrm/mipi-dbi.c:657:2-3: Unneeded semicolon
drivers/gpu/drm/tinydrm/mipi-dbi.c:593:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312144636.GA91808@lkp-g5.lkp.intel.com
2017-03-14 10:11:09 +01:00
Daniel Vetter
05df49e73b drm/i915: annote drop_caches debugfs interface with lockdep
The trouble we have is that we can't really test all the shrinker
recursion stuff exhaustively in BAT because any kind of thrashing
stress test just takes too long.

But that leaves a really big gap open, since shrinker recursions are
one of the most annoying bugs. Now lockdep already has support for
checking allocation deadlocks:

- Direct reclaim paths are marked up with
  lockdep_set_current_reclaim_state() and
  lockdep_clear_current_reclaim_state().

- Any allocation paths are marked with lockdep_trace_alloc().

If we simply mark up our debugfs with the reclaim annotations, any
code and locks taken in there will automatically complete the picture
with any allocation paths we already have, as long as we have a simple
testcase in BAT which throws out a few objects using this interface.
Not stress test or thrashing needed at all.

v2: Need to EXPORT_SYMBOL_GPL to make it compile as a module.

v3: Fixup rebase fail (spotted by Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170312205340.16202-1-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-03-14 10:10:14 +01:00
Samuel Thibault
3243367b20 usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.

The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms.  It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies.  The generic config code does not
catch this case because the 64ms is considered a sane enough value.

This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:31 +08:00
Johan Hovold
4ce362711d uwb: i1480-dfu: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Note that the dereference happens in the cmd and wait_init_done
callbacks which are called during probe.

Fixes: 1ba47da527 ("uwb: add the i1480 DFU driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.28
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:31 +08:00
Johan Hovold
daf229b159 uwb: hwa-rc: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Note that the dereference happens in the start callback which is called
during probe.

Fixes: de520b8bd5 ("uwb: add HWA radio controller driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.28
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:30 +08:00
Johan Hovold
03ace948a4 USB: wusbcore: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

This specifically fixes the NULL-pointer dereference when probing HWA HC
devices.

Fixes: df3654236e ("wusb: add the Wire Adapter (WA) core")
Cc: stable <stable@vger.kernel.org>     # 2.6.28
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:30 +08:00
Johan Hovold
f259ca3eed USB: uss720: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Note that the endpoint access that causes the NULL-deref is currently
only used for debugging purposes during probe so the oops only happens
when dynamic debugging is enabled. This means the driver could be
rewritten to continue to accept device with only two endpoints, should
such devices exist.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:30 +08:00
Johan Hovold
1dc56c52d2 USB: lvtest: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should the probed device lack endpoints.

Note that this driver does not bind to any devices by default.

Fixes: ce21bfe603 ("USB: Add LVS Test device driver")
Cc: stable <stable@vger.kernel.org>     # 3.17
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:30 +08:00
Johan Hovold
b0addd3fa6 USB: idmouse: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 17:07:30 +08:00
Jani Nikula
bb1d132935 drm/i915/vbt: split out defaults that are set when there is no VBT
The main thing are the DDI ports. If there's a VBT that says there are
no outputs, we should trust that, and not have semi-random
defaults. Unfortunately, the defaults have resulted in some Chromebooks
without VBT to rely on this behaviour, so we split out the defaults for
the missing VBT case.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/95c26079ff640d43f53b944f17e9fc356b36daec.1489152288.git.jani.nikula@intel.com
2017-03-14 10:49:13 +02:00
Yuantian Tang
427700a7ca arm64: dts: updated sata node on ls1012a platform
Updated sata node to add ecc register address and dma coherence
property.
Enable sata on ls1012a platforms as well.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-14 16:11:49 +08:00
Kirill A. Shutemov
06c830a483 x86/power: Add 5-level paging support
set_up_temporary_text_mapping() and relocate_restore_code() require
adjustments to handle additional page table level.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-7-kirill.shutemov@linux.intel.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:09 +01:00
Kirill A. Shutemov
b50858ce3e x86/mm/vmalloc: Add 5-level paging support
Modify vmalloc_fault() to handle additional page table level.

With 4-level paging, copying happens on p4d level, as we have pgd_none()
always false if p4d_t is folded.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:08 +01:00
Kirill A. Shutemov
ea3b5e60ce x86/mm/ident_map: Add 5-level paging support
Add additional page table level handing. It's mostly mechanical.

The only quirk is that with p4d folded, 'pgd' is equal to 'p4d' in
kernel_ident_mapping_init(). The pgd entry has to point to the pud
page table in this case.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:08 +01:00
Kirill A. Shutemov
0318e5abe1 x86/mm/gup: Add 5-level paging support
Extend get_user_pages_fast() to handle an additional page table level.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:08 +01:00
Kirill A. Shutemov
e0c4f6750e x86/mm: Convert trivial cases of page table walk to 5-level paging
This patch only covers simple cases. Less trivial cases will be
converted with separate patches.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:08 +01:00
Kirill A. Shutemov
fe1e8c3e96 x86/mm: Extend headers with basic definitions to support 5-level paging
This patch extends x86 headers to enable 5-level paging support.

It's still based on <asm-generic/5level-fixup.h>. We will get to the
point where we can have <asm-generic/pgtable-nop4d.h> later.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-14 08:45:07 +01:00
Roopa Prabhu
942c56ad07 lwtunnel: remove unused but set variable
silences the below warning:
net/core/lwtunnel.c: In function ‘lwtunnel_valid_encap_type_attr’:
net/core/lwtunnel.c:165:17: warning: variable ‘nla’ set but not used
[-Wunused-but-set-variable]

Fixes: 9ed59592e3 ("lwtunnel: fix autoload of lwt modules")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:55:45 -07:00
David S. Miller
92cd12c5ed Merge branch 'rds-ib-trivial-patches'
Zhu Yanjun says:

====================
rds: ib: trivial patches

v2 -> v3
remove err from messages.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:20:06 -07:00
Zhu Yanjun
569f41d187 rds: ib: unmap the scatter/gather list when error
When some errors occur, the scatter/gather list mapped to DMA addresses
should be handled.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:20:05 -07:00
Zhu Yanjun
edd08f96db rds: ib: add the static type to the function
The function rds_ib_map_fmr is used only in the ib_fmr.c
file. As such, the static type is added to limit it in this file.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:20:05 -07:00
Zhu Yanjun
ea69c88364 rds: ib: remove redundant ib_dealloc_fmr
The function ib_dealloc_fmr will never be called. As such, it should
be removed.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:20:05 -07:00
Zhu Yanjun
b418c5276a rds: ib: drop unnecessary rdma_reject
When rdma_accept fails, rdma_reject is called in it. As such, it is
not necessary to execute rdma_reject again.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 23:20:05 -07:00
Hannes Frederic Sowa
72ef9c4125 dccp: fix memory leak during tear-down of unsuccessful connection request
This patch fixes a memory leak, which happens if the connection request
is not fulfilled between parsing the DCCP options and handling the SYN
(because e.g. the backlog is full), because we forgot to free the
list of ack vectors.

Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 22:00:42 -07:00
Hannes Frederic Sowa
b20e2d5478 tun: fix premature POLLOUT notification on tun devices
aszlig observed failing ssh tunnels (-w) during initialization since
commit cc9da6cc4f ("ipv6: addrconf: use stable address generator for
ARPHRD_NONE"). We already had reports that the mentioned commit breaks
Juniper VPN connections. I can't clearly say that the Juniper VPN client
has the same problem, but it is worth a try to hint to this patch.

Because of the early generation of link local addresses, the kernel now
can start asking for routers on the local subnet much earlier than usual.
Those router solicitation packets arrive inside the ssh channels and
should be transmitted to the tun fd before the configuration scripts
might have upped the interface and made it ready for transmission.

ssh polls on the interface and receives back a POLL_OUT. It tries to send
the earily router solicitation packet to the tun interface.  Unfortunately
it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh
doesn't retry again and considers the tun interface broken forever.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131
Fixes: cc9da6cc4f ("ipv6: addrconf: use stable address generator for ARPHRD_NONE")
Cc: Bjørn Mork <bjorn@mork.no>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reported-by: Jonas Lippuner <jonas@lippuner.ca>
Cc: Jonas Lippuner <jonas@lippuner.ca>
Reported-by: aszlig <aszlig@redmoonstudios.org>
Cc: aszlig <aszlig@redmoonstudios.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 22:00:17 -07:00