Commit graph

693,635 commits

Author SHA1 Message Date
Boris Brezillon
10d4e75c36 mtd: nand: Move Micron specific init logic in nand_micron.c
Move Micron specific initialization logic into nand_micron.c. This is
part of the "separate vendor specific code from core" cleanup process.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
2017-03-08 23:21:21 +01:00
Boris Brezillon
9b2d61f80b mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c
Move Toshiba specific initialization and detection logic into
nand_toshiba.c. This is part of the "separate vendor specific code from
core" cleanup process.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
2017-03-08 23:21:21 +01:00
Boris Brezillon
01389b6bd2 mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c
Move Hynix specific initialization and detection logic into
nand_hynix.c. This is part of the "separate vendor specific code from
core" cleanup process.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
2017-03-08 23:21:20 +01:00
Boris Brezillon
c51d0ac59f mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c
Move Samsung specific initialization and detection logic into
nand_samsung.c. This is part of the "separate vendor specific code from
core" cleanup process.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
2017-03-08 23:21:20 +01:00
Boris Brezillon
abbe26d144 mtd: nand: Add manufacturer specific initialization/detection steps
A lot of NANDs are implementing generic features in a non-generic way,
or are providing advanced auto-detection logic where the NAND ID bytes
meaning changes with the NAND generation.

Providing this vendor specific initialization step will allow us to get
rid of full-id entries in the nand_ids table or all the vendor specific
cases added over the time in the generic NAND ID decoding logic.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-08 23:21:19 +01:00
Boris Brezillon
bcc678c2d7 mtd: nand: Do not expose the NAND manufacturer table directly
There is no reason to expose the NAND manufacturer table. Provide an
helper function to find manufacturers by their id.

We also turn the nand_manufacturers table into a const array, since its
members are not modified after the initial assignment.

Finally, we remove the sentinel manufacturer entry from the manufacturers
table (we already have the array size information given by ARRAY_SIZE()),
and add the nand_manufacturer_name() helper to handle the "Unknown" case
properly.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-08 23:21:18 +01:00
Boris Brezillon
f16bd7ca04 mtd: nand: Kill the MTD_NAND_IDS Kconfig option
MTD_NAND_IDS is selected by MTD_NAND, which makes it useless. Remove
the Kconfig option and link nand_ids.o into the nand.o object file.
Doing that also prevents creating an extra nand_ids.ko module when
MTD_NAND is activated as a module.

Since nand_ids.c is no longer compiled as a standalone module and the
nand_manuf_ids/nand_flash_ids symbols are only used in nand_base.c, we
can get rid of the MODULE_XXX() and EXPORT_SYMBOL() definitions.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-08 23:21:18 +01:00
Boris Brezillon
8cfb9ab68f mtd: nand: Rename the nand_manufacturers struct
Drop the 's' at the end of nand_manufacturers since the struct is actually
describing a single manufacturer, not a manufacturer table.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-08 23:21:17 +01:00
Boris Brezillon
7bb427990e mtd: nand: Rename nand_get_flash_type() into nand_detect()
Since commit 4722c0e958 ("mtd: nand: change return type of
nand_get_flash_type() to int"), nand_get_flash_type() no longer returns
a nand_flash_dev object.
Rename the function to match this new behavior.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
2017-03-08 23:21:17 +01:00
Boris Brezillon
29a198a159 mtd: nand: Get rid of busw parameter
Auto-detection functions are passed a busw parameter to retrieve the actual
NAND bus width and eventually set the correct value in chip->options.
Rework the nand_get_flash_type() function to get rid of this extra
parameter and let detection code directly set the NAND_BUSWIDTH_16 flag in
chip->options if needed.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-03-08 23:21:16 +01:00
Boris Brezillon
7f501f0a72 mtd: nand: Store nand ID in struct nand_chip
Store the NAND ID in struct nand_chip to avoid passing id_data and id_len
as function parameters.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-03-08 23:21:15 +01:00
Boris Brezillon
cbe435a182 mtd: nand: Get rid of the mtd parameter in all auto-detection functions
Now that struct nand_chip embeds an mtd_info object we can get rid of the
mtd parameter and extract it from the chip parameter with the nand_to_mtd()
helper.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
2017-03-08 23:21:15 +01:00
Chris Wilson
5b5554c51d drm/i915: Check for an invalid seqno before __i915_gem_request_started
__i915_gem_request_started() asserts that the seqno is valid, but
i915_spin_request() was not checking before querying whether the request
had started.

Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Fixes: 754c9fd576 ("drm/i915: Protect the request->global_seqno with the engine->timeline lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308142238.22994-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-03-08 20:47:07 +00:00
Chris Wilson
f166244a6d drm/i915: Purge i915_gem_object_is_dead()
i915_gem_object_is_dead() was a temporary lockdep aide whilst
transitioning to a new locking structure for obj->mm. Since commit
1233e2db19 ("drm/i915: Move object backing storage manipulation to its
own locking") it is now unused and should be removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-2-chris@chris-wilson.co.uk
2017-03-08 20:42:18 +00:00
Chris Wilson
03d1cac6ee drm/i915: Avoiding recursing on ww_mutex inside shrinker
We have to avoid taking ww_mutex inside the shrinker as we use it as a
plain mutex type and so need to avoid recursive deadlocks:

[  602.771969] =================================
[  602.771970] [ INFO: inconsistent lock state ]
[  602.771973] 4.10.0gpudebug+ #122 Not tainted
[  602.771974] ---------------------------------
[  602.771975] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[  602.771978] kswapd0/40 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  602.771979]  (reservation_ww_class_mutex){+.+.?.}, at: [<ffffffffa054680a>] i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772020] {RECLAIM_FS-ON-W} state was registered at:
[  602.772024]   mark_held_locks+0x76/0x90
[  602.772026]   lockdep_trace_alloc+0xb8/0xc0
[  602.772028]   __kmalloc_track_caller+0x5d/0x130
[  602.772031]   krealloc+0x89/0xb0
[  602.772033]   reservation_object_reserve_shared+0xaf/0xd0
[  602.772055]   i915_gem_do_execbuffer.isra.35+0x1413/0x18b0 [i915]
[  602.772075]   i915_gem_execbuffer2+0x10e/0x1d0 [i915]
[  602.772078]   drm_ioctl+0x291/0x480
[  602.772079]   do_vfs_ioctl+0x695/0x6f0
[  602.772081]   SyS_ioctl+0x3c/0x70
[  602.772084]   entry_SYSCALL_64_fastpath+0x18/0xad
[  602.772085] irq event stamp: 5197423
[  602.772088] hardirqs last  enabled at (5197423): [<ffffffff8116751d>] kfree+0xdd/0x170
[  602.772091] hardirqs last disabled at (5197422): [<ffffffff811674f9>] kfree+0xb9/0x170
[  602.772095] softirqs last  enabled at (5190992): [<ffffffff8107bfe1>] __do_softirq+0x221/0x280
[  602.772097] softirqs last disabled at (5190575): [<ffffffff8107c294>] irq_exit+0x64/0xc0
[  602.772099]
               other info that might help us debug this:
[  602.772100]  Possible unsafe locking scenario:

[  602.772101]        CPU0
[  602.772101]        ----
[  602.772102]   lock(reservation_ww_class_mutex);
[  602.772104]   <Interrupt>
[  602.772105]     lock(reservation_ww_class_mutex);
[  602.772107]
                *** DEADLOCK ***

[  602.772109] 2 locks held by kswapd0/40:
[  602.772110]  #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811337b5>] shrink_slab.constprop.62+0x35/0x280
[  602.772116]  #1:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0553957>] i915_gem_shrinker_lock+0x27/0x60 [i915]
[  602.772141]
               stack backtrace:
[  602.772144] CPU: 2 PID: 40 Comm: kswapd0 Not tainted 4.10.0gpudebug+ #122
[  602.772145] Hardware name: LENOVO 42433ZG/42433ZG, BIOS 8AET64WW (1.44 ) 07/26/2013
[  602.772147] Call Trace:
[  602.772151]  dump_stack+0x68/0xa1
[  602.772153]  print_usage_bug+0x1d4/0x1f0
[  602.772155]  mark_lock+0x390/0x530
[  602.772157]  ? print_irq_inversion_bug+0x200/0x200
[  602.772159]  __lock_acquire+0x405/0x1260
[  602.772181]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772183]  lock_acquire+0x60/0x80
[  602.772205]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772207]  mutex_lock_nested+0x69/0x760
[  602.772229]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772231]  ? kfree+0xdd/0x170
[  602.772253]  ? i915_gem_object_wait+0x163/0x410 [i915]
[  602.772255]  ? trace_hardirqs_on_caller+0x18d/0x1c0
[  602.772256]  ? trace_hardirqs_on+0xd/0x10
[  602.772278]  i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772300]  i915_gem_object_unbind+0x5e/0x130 [i915]
[  602.772323]  i915_gem_shrink+0x22d/0x3d0 [i915]
[  602.772347]  i915_gem_shrinker_scan+0x3f/0x80 [i915]
[  602.772349]  shrink_slab.constprop.62+0x1ad/0x280
[  602.772352]  shrink_node+0x52/0x80
[  602.772355]  kswapd+0x427/0x5c0
[  602.772358]  kthread+0x122/0x130
[  602.772360]  ? try_to_free_pages+0x270/0x270
[  602.772362]  ? kthread_stop+0x70/0x70
[  602.772365]  ret_from_fork+0x2e/0x40

v2: Add commentary about the pruning being opportunistic

Reported-by: Jan Nordholz <jckn@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99977#c10
Fixes: e54ca97747 ("drm/i915: Remove completed fences after a wait")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-1-chris@chris-wilson.co.uk
2017-03-08 20:42:17 +00:00
Quentin Schulz
d1caa99055 iio: adc: add support for Allwinner SoCs ADC
The Allwinner SoCs all have an ADC that can also act as a touchscreen
controller and a thermal sensor. This patch adds the ADC driver which is
based on the MFD for the same SoCs ADC.

This also registers the thermal adc channel in the iio map array so
iio_hwmon could use it without modifying the Device Tree. This registers
the driver in the thermal framework.

The thermal sensor requires the IP to be in touchscreen mode to return
correct values. Therefore, if the user is continuously reading the ADC
channel(s), the thermal framework in which the thermal sensor is
registered will switch the IP in touchscreen mode to get a temperature
value and requires a delay of 100ms (because of the mode switching),
then the ADC will switch back to ADC mode and requires also a delay of
100ms. If the ADC readings are critical to user and the SoC temperature
is not, this driver is capable of not registering the thermal sensor in
the thermal framework and thus, "quicken" the ADC readings.

This driver probes on three different platform_device_id to take into
account slight differences (registers bit and temperature computation)
between Allwinner SoCs ADCs.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-08 20:27:25 +00:00
Wolfram Sang
e0033faac3 MAINTAINERS: drop broken reference to i2c/trivial-devices
Due to RST rework, the reference to i2c/trivial-devices was changed, but the
result is broken. However, let's just drop the whole reference, since it
doesn't make sense in the first place to reference this "global" file
for a single driver.

Fixes: 8c27ceff36 ("docs: fix locations of several documents that got moved")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Kevin Tsai <ktsai@capellamicro.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-08 20:27:22 +00:00
Wei Yongjun
db233ef8a3 iio: adc: max11100: remove .owner field for driver
Remove .owner field if calls are used which set it automatically.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-08 20:27:14 +00:00
Rafał Miłecki
7ea79ae86c leds: gpio: use OF variant of LED registering function
In leds-gpio we support LEDs specified in DT so we should use
(devm_)of_led_classdev_register. This allows passing DT node as argument
for use by the LED subsystem.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-08 21:10:02 +01:00
Rafał Miłecki
442c609830 leds: core: add OF variants of LED registering functions
These new functions allow passing an additional device_node argument
that will be internally set for created LED device. Thanks to this LED
core code and triggers will be able to access DT node for reading extra
info.

The easiest solution for achieving this was reworking old functions to
more generic ones & adding simple defines for API compatibility.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-08 21:10:01 +01:00
Tony Luck
b4fb8f66f1 mm, page_alloc: Add missing check for memory holes
Commit 13ad59df67 ("mm, page_alloc: avoid page_to_pfn() when merging
buddies") moved the check for memory holes out of page_is_buddy() and
had the callers do the check.

But this wasn't done correctly in one place which caused ia64 to crash
very early in boot.

Update to fix that and make ia64 boot again.

[ v2: Vlastimil pointed out we don't need to call page_to_pfn()
      since we already have the result of that in "buddy_pfn" ]

Fixes: 13ad59df67 ("avoid page_to_pfn() when merging buddies")
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-08 11:10:10 -08:00
Linus Torvalds
8557b8e43a Greg Kroah-Hartman reported to me that the ktest of v4.10 locked up in an
infinite loop while doing the make mrproper. Looking into the cause I noticed
 that a recent update to the function run_command (used for running all
 shell commands, including "make mrproper") changed the internal loop to
 use the function wait_for_input. The wait_for_input uses select to look
 at two file descriptors. One is the file descriptor of the command it is
 running, the other is STDIN. The STDIN check was not checking the return
 status of the sysread call, and was also just writing a lot of data into
 syswrite without regard to the size of the data read.
 
 Changing the code to check the return status of sysread, and also to still
 process the passed in descriptor data without looping back to the select
 fixed Greg's problem.
 
 While looking at this code I also realized that the loop did not honor
 the timeout if STDIN always had input (or for some reason return error).
 this could prevent wait_for_input to timeout on the file descriptor it
 is suppose to be waiting for. That is fixed too.
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJYwChiFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 0vwH/0gxaT134N6lkZ5Bdv2RJNVUu8mvAbjnXNPpUz1XSBd4zUVpfKONhxc7O50V
 mNb9WfmJ4nhcjp4qeEIhdpJvO2Fjm1grIVWcvnT6FwNfvGG9S73OYyRdK0ggcYhE
 gFRsdXBipVNL0pNlJhl1//XHq644IMhqDGRBQmR+eKUym2iiJHYhgteeGOQ3PHg1
 L5MW1zORbPzeuVPDKGBVA4LDqlu3/gwJSIGZyYivAJp7f5Q5+t+1FPfUMdhodvps
 XiNsgHkHSpjhcCKxbjgSFrIX52AyrciYt+ZlIDps97R+IRk671BFHoOEcSZDux9O
 Cm3L3eBA8zIJQn9yXjlVvHfbVxU=
 =sGdD
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest fixes from Steven Rostedt:
 "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked
  up in an infinite loop while doing the make mrproper.

  Looking into the cause I noticed that a recent update to the function
  run_command (used for running all shell commands, including "make
  mrproper") changed the internal loop to use the function
  wait_for_input.

  The wait_for_input function uses select to look at two file
  descriptors. One is the file descriptor of the command it is running,
  the other is STDIN. The STDIN check was not checking the return status
  of the sysread call, and was also just writing a lot of data into
  syswrite without regard to the size of the data read.

  Changing the code to check the return status of sysread, and also to
  still process the passed in descriptor data without looping back to
  the select fixed Greg's problem.

  While looking at this code I also realized that the loop did not honor
  the timeout if STDIN always had input (or for some reason return
  error). this could prevent wait_for_input to timeout on the file
  descriptor it is suppose to be waiting for. That is fixed too"

* tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Make sure wait_for_input does honor the timeout
  ktest: Fix while loop in wait_for_input
2017-03-08 11:06:05 -08:00
Linus Torvalds
04bb94b13c overlayfs: remove now unnecessary header file include
This removes the extra include header file that was added in commit
e58bc92783 "Pull overlayfs updates from Miklos Szeredi" now that it
is no longer needed.

There are probably other such includes that got added during the
scheduler header splitup series, but this is the one that annoyed me
personally and I know about.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-08 10:42:13 -08:00
Christoph Hellwig
2fcc319d24 xfs: try any AG when allocating the first btree block when reflinking
When a reflink operation causes the bmap code to allocate a btree block
we're currently doing single-AG allocations due to having ->firstblock
set and then try any higher AG due a little reflink quirk we've put in
when adding the reflink code.  But given that we do not have a minleft
reservation of any kind in this AG we can still not have any space in
the same or higher AG even if the file system has enough free space.
To fix this use a XFS_ALLOCTYPE_FIRST_AG allocation in this fall back
path instead.

[And yes, we need to redo this properly instead of piling hacks over
 hacks.  I'm working on that, but it's not going to be a small series.
 In the meantime this fixes the customer reported issue]

Also add a warning for failing allocations to make it easier to debug.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-03-08 10:38:53 -08:00
Linus Torvalds
bd0f9b356d sched/headers: fix up header file dependency on <linux/sched/signal.h>
The scheduler header file split and cleanups ended up exposing a few
nasty header file dependencies, and in particular it showed how we in
<linux/wait.h> ended up depending on "signal_pending()", which now comes
from <linux/sched/signal.h>.

That's a very subtle and annoying dependency, which already caused a
semantic merge conflict (see commit e58bc92783 "Pull overlayfs updates
from Miklos Szeredi", which added that fixup in the merge commit).

It turns out that we can avoid this dependency _and_ improve code
generation by moving the guts of the fairly nasty helper #define
__wait_event_interruptible_locked() to out-of-line code.  The code that
includes the signal_pending() check is all in the slow-path where we
actually go to sleep waiting for the event anyway, so using a helper
function is the right thing to do.

Using a helper function is also what we already did for the non-locked
versions, see the "__wait_event*()" macros and the "prepare_to_wait*()"
set of helper functions.

We might want to try to unify all these macro games, we have a _lot_ of
subtly different wait-event loops.  But this is the minimal patch to fix
the annoying header dependency.

Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-08 10:36:03 -08:00
Taehee Yoo
c1183db885 netfilter: nf_reject: remove unused variable
variable oiph is not used.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 19:02:17 +01:00
Florian Westphal
efc9b8e33b netfilter: bridge: remove unneeded rcu_read_lock
as comment says, the function is always called with rcu read lock held.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 19:01:23 +01:00
Brian Foster
f65e6fad29 xfs: use iomap new flag for newly allocated delalloc blocks
Commit fa7f138 ("xfs: clear delalloc and cache on buffered write
failure") fixed one regression in the iomap error handling code and
exposed another. The fundamental problem is that if a buffered write
is a rewrite of preexisting delalloc blocks and the write fails, the
failure handling code can punch out preexisting blocks with valid
file data.

This was reproduced directly by sub-block writes in the LTP
kernel/syscalls/write/write03 test. A first 100 byte write allocates
a single block in a file. A subsequent 100 byte write fails and
punches out the block, including the data successfully written by
the previous write.

To address this problem, update the ->iomap_begin() handler to
distinguish newly allocated delalloc blocks from preexisting
delalloc blocks via the IOMAP_F_NEW flag. Use this flag in the
->iomap_end() handler to decide when a failed or short write should
punch out delalloc blocks.

This introduces the subtle requirement that ->iomap_begin() should
never combine newly allocated delalloc blocks with existing blocks
in the resulting iomap descriptor. This can occur when a new
delalloc reservation merges with a neighboring extent that is part
of the current write, for example. Therefore, drop the
post-allocation extent lookup from xfs_bmapi_reserve_delalloc() and
just return the record inserted into the fork. This ensures only new
blocks are returned and thus that preexisting delalloc blocks are
always handled as "found" blocks and not punched out on a failed
rewrite.

Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-03-08 09:58:08 -08:00
Jan Kara
672a2c87c8 axonram: Fix gendisk handling
It is invalid to call del_gendisk() when disk->queue is NULL. Fix error
handling in axon_ram_probe() to avoid doing that.

Also del_gendisk() does not drop a reference to gendisk allocated by
alloc_disk(). That has to be done by put_disk(). Add that call where
needed.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:40 -07:00
NeilBrown
79bd99596b blk: improve order of bio handling in generic_make_request()
To avoid recursion on the kernel stack when stacked block devices
are in use, generic_make_request() will, when called recursively,
queue new requests for later handling.  They will be handled when the
make_request_fn for the current bio completes.

If any bios are submitted by a make_request_fn, these will ultimately
be handled seqeuntially.  If the handling of one of those generates
further requests, they will be added to the end of the queue.

This strict first-in-first-out behaviour can lead to deadlocks in
various ways, normally because a request might need to wait for a
previous request to the same device to complete.  This can happen when
they share a mempool, and can happen due to interdependencies
particular to the device.  Both md and dm have examples where this happens.

These deadlocks can be erradicated by more selective ordering of bios.
Specifically by handling them in depth-first order.  That is: when the
handling of one bio generates one or more further bios, they are
handled immediately after the parent, before any siblings of the
parent.  That way, when generic_make_request() calls make_request_fn
for some particular device, we can be certain that all previously
submited requests for that device have been completely handled and are
not waiting for anything in the queue of requests maintained in
generic_make_request().

An easy way to achieve this would be to use a last-in-first-out stack
instead of a queue.  However this will change the order of consecutive
bios submitted by a make_request_fn, which could have unexpected consequences.
Instead we take a slightly more complex approach.
A fresh queue is created for each call to a make_request_fn.  After it completes,
any bios for a different device are placed on the front of the main queue, followed
by any bios for the same device, followed by all bios that were already on
the queue before the make_request_fn was called.
This provides the depth-first approach without reordering bios on the same level.

This, by itself, it not enough to remove all deadlocks.  It just makes
it possible for drivers to take the extra step required themselves.

To avoid deadlocks, drivers must never risk waiting for a request
after submitting one to generic_make_request.  This includes never
allocing from a mempool twice in the one call to a make_request_fn.

A common pattern in drivers is to call bio_split() in a loop, handling
the first part and then looping around to possibly split the next part.
Instead, a driver that finds it needs to split a bio should queue
(with generic_make_request) the second part, handle the first part,
and then return.  The new code in generic_make_request will ensure the
requests to underlying bios are processed first, then the second bio
that was split off.  If it splits again, the same process happens.  In
each case one bio will be completely handled before the next one is attempted.

With this is place, it should be possible to disable the
punt_bios_to_recover() recovery thread for many block devices, and
eventually it may be possible to remove it completely.

Ref: http://www.spinics.net/lists/raid/msg54680.html
Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Jan Kara
c01228db4b Revert "scsi, block: fix duplicate bdi name registration crashes"
This reverts commit 0dba1314d4. It causes
leaking of device numbers for SCSI when SCSI registers multiple gendisks
for one request_queue in succession. It can be easily reproduced using
Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Furthermore the protection provided by this commit is not needed anymore
as the problem it was fixing got also fixed by commit 165a5e22fa
"block: Move bdi_unregister() to del_gendisk()".

[1]: http://marc.info/?l=linux-block&m=148554717109098&w=2

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Jan Kara
90f16fddcc block: Make del_gendisk() safer for disks without queues
Commit 165a5e22fa "block: Move bdi_unregister() to del_gendisk()"
added disk->queue dereference to del_gendisk(). Although del_gendisk()
is not supposed to be called without disk->queue valid and
blk_unregister_queue() warns in that case, this change will make it oops
instead. Return to the old more robust behavior of just warning when
del_gendisk() gets called for gendisk with disk->queue being NULL.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Jan Kara
df23de5561 bdi: Fix use-after-free in wb_congested_put()
bdi_writeback_congested structures get created for each blkcg and bdi
regardless whether bdi is registered or not. When they are created in
unregistered bdi and the request queue (and thus bdi) is then destroyed
while blkg still holds reference to bdi_writeback_congested structure,
this structure will be referencing freed bdi and last wb_congested_put()
will try to remove the structure from already freed bdi.

With commit 165a5e22fa "block: Move bdi_unregister() to
del_gendisk()", SCSI started to destroy bdis without calling
bdi_unregister() first (previously it was calling bdi_unregister() even
for unregistered bdis) and thus the code detaching
bdi_writeback_congested in cgwb_bdi_destroy() was not triggered and we
started hitting this use-after-free bug. It is enough to boot a KVM
instance with virtio-scsi device to trigger this behavior.

Fix the problem by detaching bdi_writeback_congested structures in
bdi_exit() instead of bdi_unregister(). This is also more logical as
they can get attached to bdi regardless whether it ever got registered
or not.

Fixes: 165a5e22fa
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Jan Kara
b6f8fec444 block: Allow bdi re-registration
SCSI can call device_add_disk() several times for one request queue when
a device in unbound and bound, creating new gendisk each time. This will
lead to bdi being repeatedly registered and unregistered. This was not a
big problem until commit 165a5e22fa "block: Move bdi_unregister() to
del_gendisk()" since bdi was only registered repeatedly (bdi_register()
handles repeated calls fine, only we ended up leaking reference to
gendisk due to overwriting bdi->owner) but unregistered only in
blk_cleanup_queue() which didn't get called repeatedly. After
165a5e22fa we were doing correct bdi_register() - bdi_unregister()
cycles however bdi_unregister() is not prepared for it. So make sure
bdi_unregister() cleans up bdi in such a way that it is prepared for
a possible following bdi_register() call.

An easy way to provoke this behavior is to enable
CONFIG_DEBUG_TEST_DRIVER_REMOVE and use scsi_debug driver to create a
scsi disk which immediately hangs without this fix.

Fixes: 165a5e22fa
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 10:55:17 -07:00
Pablo Neira Ayuso
568af6de05 netfilter: nf_tables: set pktinfo->thoff at AH header if found
Phil Sutter reports that IPv6 AH header matching is broken. From
userspace, nft generates bytecode that expects to find the AH header at
NFT_PAYLOAD_TRANSPORT_HEADER both for IPv4 and IPv6. However,
pktinfo->thoff is set to the inner header after the AH header in IPv6,
while in IPv4 pktinfo->thoff points to the AH header indeed. This
behaviour is inconsistent. This patch fixes this problem by updating
ipv6_find_hdr() to get the IP6_FH_F_AUTH flag so this function stops at
the AH header, so both IPv4 and IPv6 pktinfo->thoff point to the AH
header.

This is also inconsistent when trying to match encapsulated headers:

1) A packet that looks like IPv4 + AH + TCP dport 22 will *not* match.
2) A packet that looks like IPv6 + AH + TCP dport 22 will match.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 18:35:27 +01:00
Zhangfei Gao
ab809fd81f i2c: designware: add reset interface
Some platforms like hi3660 need do reset first to allow accessing registers

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ramiro Oliveira <ramiro.oliveira@synopsys.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:15:18 +01:00
Heiner Kallweit
3b0277f198 i2c: meson: fix wrong variable usage in meson_i2c_put_data
Most likely a copy & paste error.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
2017-03-08 18:06:47 +01:00
Dmitry Torokhov
b0c1e95ab4 i2c: copy device properties when using i2c_register_board_info()
This will allow marking device property lists as __initdata, the same as
board info structures themselves.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:05:09 +01:00
Ying Xue
8e05ba7f84 netfilter: nf_nat_sctp: fix ICMP packet to be dropped accidently
Regarding RFC 792, the first 64 bits of the original SCTP datagram's
data could be contained in ICMP packet, such as:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Type      |     Code      |          Checksum             |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                             unused                            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |      Internet Header + 64 bits of Original Data Datagram      |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

However, according to RFC 4960, SCTP datagram header is as below:

    0                   1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |     Source Port Number        |     Destination Port Number   |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                      Verification Tag                         |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
   |                           Checksum                            |
   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

It means only the first three fields of SCTP header can be carried in
ICMP packet except for Checksum field.

At present in sctp_manip_pkt(), no matter whether the packet is ICMP or
not, it always calculates SCTP packet checksum. However, not only the
calculation of checksum is unnecessary for ICMP, but also it causes
another fatal issue that ICMP packet is dropped. The header size of
SCTP is used to identify whether the writeable length of skb is bigger
than skb->len through skb_make_writable() in sctp_manip_pkt(). But
when it deals with ICMP packet, skb_make_writable() directly returns
false as the writeable length of skb is bigger than skb->len.
Subsequently ICMP is dropped.

Now we correct this misbahavior. When sctp_manip_pkt() handles ICMP
packet, 8 bytes rather than the whole SCTP header size is used to check
if writeable length of skb is overflowed. Meanwhile, as it's meaningless
to calculate checksum when packet is ICMP, the computation of checksum
is ignored as well.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 18:04:06 +01:00
Wolfram Sang
1945250d97 i2c: m65xx: drop superfluous quirk structure
All length fields in Linux I2C are u16, so a HW length limitation of 16
bit lengths is not a limitation. Remove the quirk structure.

Tested-by: Jun Gao <jun.gao@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:03:41 +01:00
Florian Westphal
7b4fdf77a4 netfilter: don't track fragmented packets
Andrey reports syzkaller splat caused by

NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb)));

in ipv4 nat.  But this assertion (and the comment) are wrong, this function
does see fragments when IP_NODEFRAG setsockopt is used.

As conntrack doesn't track packets without complete l4 header, only the
first fragment is tracked.

Because applying nat to first packet but not the rest makes no sense this
also turns off tracking of all fragments.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 18:02:12 +01:00
Jaedon Shin
2de3ec4f1d i2c: brcmstb: Fix START and STOP conditions
The BSC data buffers to send and receive data are each of size 32 bytes
or 8 bytes 'xfersz' depending on SoC. The problem observed for all the
combined message transfer was if length of data transfer was a multiple
of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed
this by appropriately setting START/STOP conditions for such transfers.

Fixes: dd1aa2524b ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 18:00:49 +01:00
Qi Hou
02dbfa5e55 i2c: add missing of_node_put in i2c_mux_del_adapters
Refcount of of_node is increased with of_node_get() in i2c_mux_add_adapter().
It must be decreased with of_node_put() in i2c_mux_del_adapters().

Signe-off-by: Qi Hou <qi.hou@windriver.com>
Reviewed-by: Zhang Xiao <xiao.zhang@windriver.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 17:59:12 +01:00
Jon Derrick
b0bfdfc2bf block/sed: Fix opal user range check and unused variables
Fixes check that the opal user is within the range, and cleans up unused
method variables.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Johannes Thumshirn
0bc315381f zram: set physical queue limits to avoid array out of bounds accesses
zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using
the NVMe over Fabrics loopback target which potentially sends a huge bulk of
pages attached to the bio's bvec this results in a kernel panic because of
array out of bounds accesses in zram_decompress_page().

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Ming Lei
01388df376 blk-mq: free hctx->cpumask in release handler of hctx's kobject
It is obviously that hctx->cpumask is per hctx, and both
share same lifetime, so this patch moves freeing of hctx->cpumask
into release handler of hctx's kobject.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Ming Lei
6c8b232efe blk-mq: make lifetime consistent between hctx and its kobject
This patch removes kobject_put() over hctx in __blk_mq_unregister_dev(),
and trys to keep lifetime consistent between hctx and hctx's kobject.

Now blk_mq_sysfs_register() and blk_mq_sysfs_unregister() become
totally symmetrical, and kobject's refcounter drops to zero just
when the hctx is freed.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Ming Lei
7ea5fe31c1 blk-mq: make lifetime consitent between q/ctx and its kobject
Currently from kobject view, both q->mq_kobj and ctx->kobj can
be released during one cycle of blk_mq_register_dev() and
blk_mq_unregister_dev(). Actually, sw queue's lifetime is
same with its request queue's, which is covered by request_queue->kobj.

So we don't need to call kobject_put() for the two kinds of
kobject in __blk_mq_unregister_dev(), instead we do that
in release handler of request queue.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Ming Lei
737f98cfe7 blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
Both q->mq_kobj and sw queues' kobjects should have been initialized
once, instead of doing that each add_disk context.

Also this patch removes clearing of ctx in blk_mq_init_cpu_queues()
because percpu allocator fills zero to allocated variable.

This patch fixes one issue[1] reported from Omar.

[1] kernel wearning when doing unbind/bind on one scsi-mq device

[   19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong.
[   19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34
[   19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014
[   19.350920] Workqueue: events_unbound async_run_entry_fn
[   19.350920] Call Trace:
[   19.350920]  dump_stack+0x63/0x83
[   19.350920]  kobject_init+0x77/0x90
[   19.350920]  blk_mq_register_dev+0x40/0x130
[   19.350920]  blk_register_queue+0xb6/0x190
[   19.350920]  device_add_disk+0x1ec/0x4b0
[   19.350920]  sd_probe_async+0x10d/0x1c0 [sd_mod]
[   19.350920]  async_run_entry_fn+0x48/0x150
[   19.350920]  process_one_work+0x1d0/0x480
[   19.350920]  worker_thread+0x48/0x4e0
[   19.350920]  kthread+0x101/0x140
[   19.350920]  ? process_one_work+0x480/0x480
[   19.350920]  ? kthread_create_on_node+0x60/0x60
[   19.350920]  ret_from_fork+0x2c/0x40

Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-08 09:56:12 -07:00
Chris Brandt
2501c1bb05 i2c: riic: fix restart condition
While modifying the driver to use the STOP interrupt, the completion of the
intermediate transfers need to wake the driver back up in order to initiate
the next transfer (restart condition). Otherwise you get never ending
interrupts and only the first transfer sent.

Fixes: 71ccea095e ("i2c: riic: correctly finish transfers")
Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-08 17:54:59 +01:00