Commit graph

693,635 commits

Author SHA1 Message Date
Jaegeuk Kim
26a28a0c1e f2fs: show the max number of atomic operations
This patch adds to show the max number of atomic operations which are
conducting concurrently.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Jaegeuk Kim
ec91538dcc f2fs: get io size bit from mount option
This patch adds to set io_size_bits from mount option.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Jaegeuk Kim
0a595ebaaa f2fs: support IO alignment for DATA and NODE writes
This patch implements IO alignment by filling dummy blocks in DATA and NODE
write bios. If we can guarantee, for example, 32KB or 64KB for such the IOs,
we can eliminate underlying dummy page problem which FTL conducts in order to
close MLC or TLC partial written pages.

Note that,
 - it requires "-o mode=lfs".
 - IO size should be power of 2, not exceed BIO_MAX_PAGES, 256.
 - read IO is still 4KB.
 - do checkpoint at fsync, if dummy NODE page was written.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Jaegeuk Kim
554b5125f5 f2fs: add submit_bio tracepoint
This patch adds final submit_bio() tracepoint.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Jaegeuk Kim
d621e6b370 f2fs: fix wrong tracepoints for op and op_flags
This patch fixes wrong tracepoints in terms of op and op_flags.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Jaegeuk Kim
9d52a504db f2fs: reassign new segment for mode=lfs
Otherwise we can remain wrong curseg->next_blkoff, resulting in fsck failure.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Yunlei He
650d3c4e56 f2fs: fix a missing discard prefree segments
If userspace issue a fstrim with a range not involve prefree segments,
it will reuse these segments without discard. This patch fix it.

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Geliang Tang
ed0b56209f f2fs: use rb_entry_safe
Use rb_entry_safe() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Yunlei He
746e240392 f2fs: add a case of no need to read a page in write begin
If the range we write cover the whole valid data in the last page,
we do not need to read it.

Signed-off-by: Yunlei He <heyunlei@huawei.com>
[Jaegeuk Kim: nullify the remaining area (fix: xfstests/f2fs/001)]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Yunlei He
7855eba4d6 f2fs: fix a problem of using memory after free
This patch fix a problem of using memory after free
in function __try_merge_extent_node.

Fixes: 0f825ee6e8 ("f2fs: add new interfaces for extent tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:01 +09:00
Dan Carpenter
07fe8d4440 f2fs: remove unneeded condition
We checked that "inode" is not an error pointer earlier so there is
no need to check again here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:00 +09:00
Chao Yu
5c9e418436 f2fs: don't cache nat entry if out of memory
If we run out of memory, in cache_nat_entry, it's better to avoid loop
for allocating memory to cache nat entry, so in low memory scenario, for
read path of node block, I expect this can avoid unneeded latency.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:00 +09:00
Yunlei He
fed2466848 f2fs: remove unused values in recover_fsync_data
This patch remove unused values in function recover_fsync_data

Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-01-29 12:46:00 +09:00
Harninder Rai
73447f68d7 dt-bindings: clockgen: Add compatible string for LS1012A
Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:09:47 +08:00
Harninder Rai
ce3ef57727 Documentation: DT: add LS1012A compatible for SCFG and DCFG
Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:09:44 +08:00
Harninder Rai
6d3db2f79b Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:09:29 +08:00
Patrick Bruenn
8b649e4263 ARM: dts: imx53-qsb-common: fix FEC pinmux config
The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:05:33 +08:00
Breno Lima
18ba386826 ARM: dts: udoo_neo: Add Bluetooth support
Udoo Neo has a TI WL1831 Bluetooth chip connected to the UART3 port.

Add support for it.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:04:06 +08:00
Breno Lima
850a983f16 ARM: dts: udoo_neo: Add Wifi support
Udoo Neo has a TI WL1831 Wifi chip connected to the USDHC3 port.

Add support for it.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:04:05 +08:00
Breno Lima
ab51eba74c ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
Add support for micro USB (OTG1) and USB Host (OTG2) for UDOO Neo board.

Tested on a UDOO Neo Full board by mounting a mass storage device
on both ports.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:04:05 +08:00
Lucas Stach
c519d57b19 ARM: imx6: remove unit address from LDB node
The LDB has no reg property as it uses the IOMUX-GPR syscon to access
its registers. Remove the unit address from the DT node to make DT
compiler happy.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 10:01:25 +08:00
Lucas Stach
7c3f836369 ARM: imx6qp: adapt DT to changed FEC interrupts
On i.MX6QP the FEC interrupts are wired to the GPC, just like all other
device interrupts. This allows to FEC to wake the CPU from WFI, but for
this to work the kernel needs to know about the new IRQ routing.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:55:58 +08:00
Lucas Stach
ecbf5e7019 ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5
Fix the min/max voltage constraints for the anatop 1p1 and 2p5
regulator to match the typical operating range mentioned in the
datasheet.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:54:02 +08:00
Lucas Stach
993051b27e ARM: imx6: fix min/max voltage of anatop 2p5 regulator
The regulation bound of this regulator are 2.1V to 2.875V, the
wrong DT values cause the driver to miscalculate the effective
voltage.

This isn't really an issue right now, as nobody actively changes
the regulator voltage, but better fix it now.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:53:56 +08:00
Sascha Hauer
213e51ca8d ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names
The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr.
In a board dts we have to make sure that both controllers are supplied
with the correct pins. It's way too easy to do this wrong since only
a look into the reference manual can reveal which pins belong to which
controller. To make this clearer add "LPSR" to the pin names which
belong to the LPSR controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:53:27 +08:00
Sascha Hauer
ccc59b0c18 ARM: dts: imx7d-cl-som: Fix OTG power pinctrl
GPIO01_IO05 is controlled by the LPSR iomux controller, so attach
the corresponding pin to this controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:53:08 +08:00
Sascha Hauer
9a20aa2677 ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux
The watchdog pin and the pwm output pin are controlled by the
iomuxc_lpsr, not the regular iomux, so move the pins there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:53:01 +08:00
Sascha Hauer
1d4a594338 ARM: dts: imx7s-warp: Fix watchdog pinmux
The watchdog pin is controlled by the iomuxc_lpsr, not the regular
iomux, so move it there.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:52:55 +08:00
Linus Torvalds
53cd1ad1a6 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "Two I2C driver bugfixes.

  The 'VLLS mode support' patch should have been entitled 'reconfigure
  pinctrl after suspend' to make the bugfix more clear. Sorry, I missed
  that, yet didn't want to rebase"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: add VLLS mode support
  i2c: i2c-cadence: Initialize configuration before probing devices
2017-01-28 15:09:23 -08:00
Ingo Molnar
0c6fc11ac3 x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
Three more renames left:

   e820_end_of_ram_pfn()      =>  e820__end_of_ram_pfn()
   e820_end_of_low_ram_pfn()  =>  e820__end_of_low_ram_pfn()
   e820_reallocate_tables()   =>  e820__reallocate_tables()

After this all E820 API calls are prefixed with "e820__", making
it much easier to grep for E820 functionality in the kernel.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:26 +01:00
Ingo Molnar
dd618c7256 x86/boot/e820: Remove unnecessary #include's
A number of headers were included into e820.c unnecessarily - remove them.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:26 +01:00
Ingo Molnar
090d717164 x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
This function is a minor misnomer: it is talking about 'marking' regions
as nosave - while the hibernation API is called register_nosave_region()
and the e820_mark_nosave_regions() is a wrapper around that functionality.

So name it to be in line with the API it is derived from.

( Rename e820_mark_nvs_memory() to e820__register_nvs_regions(), for similar
  reasons. )

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:26 +01:00
Ingo Molnar
1506c8dc94 x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
Also do some minor cleanups.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:25 +01:00
Ingo Molnar
81b3e090fa x86/boot/e820: Use bool in query APIs
Change e820__mapped_any() and e820__mapped_all()'s return type and
e820__range_remove()'s check_type parameter to bool.

Propagate it into arch/x86/pci/mmconfig-shared.c as this change
affects a function signature there too.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:25 +01:00
Ingo Molnar
1a1270349a x86/boot/e820: Document e820__reserve_setup_data()
Also clean it up a bit.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:25 +01:00
Ingo Molnar
9a02fd0f1e x86/boot/e820: Clean up __e820__update_table() et al
The __e820__update_table() function has various weirdly named variables,
such as 'pbios', 'biosmap' and 'pnr_map' which are pretty confusing
and actively misleading at times.

This weird naming found its way into other functions as well, such as
__append_e820_table() and append_e820_table().

Standardize the naming to make it all much easier to read:

	biosmap  ->  entries
	pbios    ->  entry
	nr_map   ->  nr_entries
        pnr_map  ->  nr_entries
	...

Also clean up the types used: entry indices routinely mixed u32 and int,
standardize on u32 thoughout.

Update the comments as well, while at it.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:24 +01:00
Ingo Molnar
f9748fa045 x86/boot/e820: Simplify the e820__update_table() interface
The e820__update_table() parameters are pretty complex:

  arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map);

But 90% of the usage is trivial:

  arch/x86/kernel/e820.c:	if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries))
  arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/e820.c:		if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries) < 0)
  arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);
  arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/setup.c:		e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/platform/efi/efi.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),
  arch/x86/xen/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),

as it only uses an exiting struct e820_table's entries array, its size and
its current number of entries as input and output arguments.

Only one use is non-trivial:

  arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);

... which call updates the E820 table in the zeropage in-situ, and the layout there does not
match that of 'struct e820_table' (in particular nr_entries is at a different offset,
hardcoded by the boot protocol).

Simplify all this by introducing a low level __e820__update_table() API that
the zeropage update call can use, and simplifying the main e820__update_table()
call signature down to:

	int e820__update_table(struct e820_table *table);

This visibly simplifies all the call sites:

  arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_table *table);
  arch/x86/include/asm/e820/types.h: * call to e820__update_table() to remove duplicates.  The allowance
  arch/x86/kernel/e820.c: * The return value from e820__update_table() is zero if it
  arch/x86/kernel/e820.c:int __init e820__update_table(struct e820_table *table)
  arch/x86/kernel/e820.c:	if (e820__update_table(e820_table))
  arch/x86/kernel/e820.c:	e820__update_table(e820_table_firmware);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table);
  arch/x86/kernel/e820.c:		if (e820__update_table(e820_table) < 0)
  arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table);
  arch/x86/kernel/setup.c:	e820__update_table(e820_table);
  arch/x86/kernel/setup.c:		e820__update_table(e820_table);
  arch/x86/platform/efi/efi.c:	e820__update_table(e820_table);
  arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);
  arch/x86/xen/setup.c:	e820__update_table(e820_table);
  arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:24 +01:00
Ingo Molnar
e7dbf7ad41 xen, x86/boot/e820: Simplify Xen's xen_e820_table construct
The Xen guest memory setup code has:

	static struct e820_entry xen_e820_table[E820_MAX_ENTRIES] __initdata;
	static u32 xen_e820_table_entries __initdata;

... which is really a 'struct e820_table', open-coded.

Convert the Xen code over to use a single struct e820_table, as this
will allow the simplification of the e820__update_table() API.

No intended change in functionality, but not runtime tested.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:23 +01:00
Ingo Molnar
d88961b5d4 x86/boot/e820: Clean up and standardize sizeof() uses
There's various sizeof() uses in e820.c - standardize on the shortest
and least error prone one, along the pattern of:

-	memset(entry, 0, sizeof(struct e820_entry));
+	memset(entry, 0, sizeof(*entry));

... because with this pattern in most cases it's immediately clear that
we have used the right type - and the pattern is robust against changing
the type as well.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:23 +01:00
Ingo Molnar
08b46d5dd8 x86/boot/e820: Clean up the E820 table size define names
We've got a number of defines related to the E820 table and its size:

	E820MAP
	E820NR
	E820_X_MAX
	E820MAX

The first two denote byte offsets into the zeropage (struct boot_params),
and can are not used in the kernel and can be removed.

The E820_*_MAX values have an inconsistent structure and it's unclear in any
case what they mean. 'X' presuably goes for extended - but it's not very
expressive altogether.

Change these over to:

	E820_MAX_ENTRIES_ZEROPAGE
	E820_MAX_ENTRIES

... which are self-explanatory names.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:23 +01:00
Ingo Molnar
09821ff1d5 x86/boot/e820: Prefix the E820_* type names with "E820_TYPE_"
So there's a number of constants that start with "E820" but which
are not types - these create a confusing mixture when seen together
with 'enum e820_type' values:

	E820MAP
	E820NR
	E820_X_MAX
	E820MAX

To better differentiate the 'enum e820_type' values prefix them
with E820_TYPE_.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:22 +01:00
Jaehoon Chung
4e0a90b381 PCI: exynos: Rename all pointer names from "exynos_pcie" to "ep"
Rename the simple pointer name as "ep" instead of "exynos_pcie".  After
applying this patch, it can save the 10 characthers within one line.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2017-01-28 15:21:06 -06:00
Simon Horman
45345e9a85 i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
Explicitly list per-SoC binding for r8a7796. No driver change
is required as the initialisation sequence is currently the same
as for the R-Car Gen3 fallback binding.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28 22:19:42 +01:00
Guenter Roeck
22ae11245e i2c: i2c-cros-ec-tunnel: Reduce logging noise
If an i2c access through i2c-cros-ec-tunnel returns an error, the following
log message is seen on the console.

cros-ec-i2c-tunnel ff200000.spi:ec@0:i2c-tunnel:
			Error parsing EC i2c message -121

This can happen a lot if, for example, the i2c-detect command is executed.

Since it is perfectly normal for an i2c controller to report an error,
drop the message. Also, report -ENXIO instead of -EREMOTEIO if the access
error is due to NAK from the device, and return -EIO instead of -EREMOTEIO
for other errors, as suggested in Documentation/i2c/fault-codes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28 22:16:38 +01:00
Luis Oliveira
cefae80249 i2c: core: helper function to detect slave mode
This function has the purpose of mode detection by checking the
device nodes for a reg matching with the I2C_OWN_SLAVE_ADDREESS flag.
Currently only checks using OF functions (ACPI slave not supported yet).

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28 22:12:37 +01:00
Helge Deller
2ad5d52d42 parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header
In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if
BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin.

Solve this problem by using __BITS_PER_LONG instead.  Since we now
#include asm/bitsperlong.h avoid further potential userspace pollution
by moving the #define of SHIFT_PER_LONG to bitops.h which is not
exported to userspace.

This patch unbreaks compiling qemu on hppa/parisc.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
2017-01-28 21:54:23 +01:00
Helge Deller
83b5d1e3d3 parisc, parport_gsc: Fixes for printk continuation lines
Signed-off-by: Helge Deller <deller@gmx.de>
2017-01-28 21:54:21 +01:00
Alex Williamson
7184f5b451 PCI: Add ACS quirk for Intel Union Point
Intel 200-series chipsets have the same errata as 100-series: the ACS
capability doesn't follow the PCIe spec, the capability and control
registers are dwords rather than words.  Add PCIe root port device IDs to
existing quirk.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-28 14:46:02 -06:00
Linus Torvalds
d56a5ca366 NFS client bugfixes for Linux 4.10
Stable patches:
 - NFSv4.1: Fix a deadlock in layoutget
 - NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors
 - NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode
 - Fix a memory leak when removing the SUNRPC module
 
 Bugfixes:
 - Fix a reference leak in _pnfs_return_layout
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYjM6UAAoJEGcL54qWCgDy+WoP/2NdwqzOa3xxn8piMhLh/TLJ
 lxWfVmUZJ8UNVSVl45NDslt2V63P0gpITUiaVo27rPfjKV8pv8XTU7HkxCuXzj0m
 uo11jEErsYxbXELNDL2y1fmsPTygYvg4MAV3NK0inKv/ciu6TTMddoga+QQXGJPz
 QqQ7znTHyjDSTqZM1D5+f8EhbY7AIAzJbkgVr90WPPjsT6YtdlTQpMb1O9tlDtfj
 oYidIOxRphqLOYTdoD8NW4x19dlgTNIYyCgOFomCbpUTFKKK5RFjVy+bpml3NxV1
 oUldw8lhiUE8x/5J/CfbCMt1bPZ3yJeFWNghINOIF7cgGnvKEjw0uO2o8Lk6fMzi
 yF2aNoZcNQnyoHHCjsqK8t5dB51abwxlzeElrFB1u73B56CcXB91xEP0GsX1vFt1
 BIGCnfsOvtYPZxp/OX+B3AweAJ2DRuIvdze9cS2IeHBW9c5XdVdDmMK7CFeL9dc3
 YEsWmaWNWtDt41erxCvQ0ezkr3lPHXOcjwS440LIiVpr38/rzjp81+Tf+i2D1GzB
 XTsy9IHzaC2zLb0Vz5vOR3S10k4OiFtXT6ikoZLwgpTfI2gt146e0YHx3g90AiFh
 QYBRNLJrjSYVedjv2GGFLG1WWsHbhbP6dpmT3BwNmhZTzjPoqZ76f5QFIQUya4jt
 4Y2ksyhx7pOeOJy++6SN
 =S5qH
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Stable patches:
   - NFSv4.1: Fix a deadlock in layoutget
   - NFSv4 must not bump sequence ids on NFS4ERR_MOVED errors
   - NFSv4 Fix a regression with OPEN EXCLUSIVE4 mode
   - Fix a memory leak when removing the SUNRPC module

  Bugfixes:
   - Fix a reference leak in _pnfs_return_layout"

* tag 'nfs-for-4.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS: Fix a reference leak in _pnfs_return_layout
  nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
  SUNRPC: cleanup ida information when removing sunrpc module
  NFSv4.0: always send mode in SETATTR after EXCLUSIVE4
  nfs: Don't increment lock sequence ID after NFS4ERR_MOVED
  NFSv4.1: Fix a deadlock in layoutget
2017-01-28 11:50:17 -08:00
Linus Torvalds
dd55396267 Merge tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
 "This fixes several corner cases for raid5 cache, which is merged into
  this cycle"

* tag 'md/4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/r5cache: disable write back for degraded array
  md/r5cache: shift complex rmw from read path to write path
  md/r5cache: flush data only stripes in r5l_recovery_log()
  md/raid5: move comment of fetch_block to right location
  md/r5cache: read data into orig_page for prexor of cached data
  md/raid5-cache: delete meaningless code
2017-01-28 11:09:04 -08:00