Commit graph

693,635 commits

Author SHA1 Message Date
Jens Axboe
f8a5b12247 blk-mq: make mq_ops a const pointer
We never change it, make that clear.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-11 20:47:44 -07:00
Ming Lei
729204ef49 block: relax check on sg gap
If the last bvec of the 1st bio and the 1st bvec of the next
bio are physically contigious, and the latter can be merged
to last segment of the 1st bio, we should think they don't
violate sg gap(or virt boundary) limit.

Both Vitaly and Dexuan reported lots of unmergeable small bios
are observed when running mkfs on Hyper-V virtual storage, and
performance becomes quite low. This patch fixes that performance
issue.

The same issue should exist on NVMe, since it sets virt boundary too.

Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-11 20:47:08 -07:00
Vlastimil Babka
1661f2e21c floppy: replace wrong kmalloc(GFP_USER) with GFP_KERNEL
The raw_cmd_copyin() function does a kmalloc() with GFP_USER, although the
allocated structure is obviously not mapped to userspace, just copied from/to.
In this case GFP_KERNEL is more appropriate, so let's use it, although in the
current implementation this does not manifest as any error.

Reported-by: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 20:47:08 -07:00
Uma Krishnan
0df5bef739 scsi: cxlflash: Cancel scheduled workers before stopping AFU
When processing an AFU asynchronous interrupt, if the action results in an
operation that requires off level processing (a link reset for example),
the worker thread is scheduled. In the meantime a reset event (i.e.: EEH)
could unmap the AFU to recover. This results in an Oops when the worker
thread tries to access the AFU mapping.

[c000000f17e03b90] d000000007cd5978 cxlflash_worker_thread+0x268/0x550
[c000000f17e03c40] c00000000011883c process_one_work+0x1dc/0x680
[c000000f17e03ce0] c000000000118e80 worker_thread+0x1a0/0x520
[c000000f17e03d80] c000000000126174 kthread+0xf4/0x100
[c000000f17e03e30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0

In an effort to avoid this, a mapcount was introduced in
commit b45cdbaf9f ("cxlflash: Resolve oops in wait_port_offline")
but due to the race condition described above, this solution is incomplete.

In order to fully resolve this problem and to simplify things, this commit
removes the mapcount solution. Instead, the scheduled worker thread is
cancelled after interrupts have been disabled and prior to the mapping
being freed.

Fixes: b45cdbaf9f ("cxlflash: Resolve oops in wait_port_offline")
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:38:15 -05:00
Matthew R. Ochs
fb67d44dfb scsi: cxlflash: Cleanup prints
The usage of prints within the cxlflash driver is inconsistent. This
hinders debug and makes the driver source and log output appear sloppy.

The following cleanups help unify the prints within cxlflash:
 - move all prints to dev-* where possible
 - transition all hex prints to lowercase
 - standardize variable prints in debug output
 - derive pointers in a consistent manner
 - change int to bool where appropriate
 - remove superfluous data from prints and print statements that do not
   make sense

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:38:15 -05:00
Matthew R. Ochs
696d0b0c71 scsi: cxlflash: Support SQ Command Mode
The SISLite specification outlines a new queuing model to improve
over the MMIO-based IOARRIN model that exists today. This new model
uses a submission queue that exists in host memory and is shared with
the device. Each entry in the queue is an IOARCB that describes a
transfer request. When requests are submitted, IOARCBs ('current'
position tracked in host software) are populated and the submission
queue tail pointer is then updated via MMIO to make the device aware
of the requests.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:38:15 -05:00
Matthew R. Ochs
9c7d1ee5f1 scsi: cxlflash: Refactor context reset to share reset logic
As staging for supporting hardware with different context reset
registers but a similar reset procedure, refactor the existing context
reset routine to move the reset logic to a common routine. This will
allow hardware with a different reset register to leverage existing
code.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:38:14 -05:00
Subhash Jadavani
73eba2be92 scsi: ufs: fix arguments order some trace calls
Colin Ian King reported that with commit 7ff5ab4736 ("scsi: ufs: add
tracing support") static analysis is reporting that we may have swapped
arguments on calls to:

    trace_ufshcd_runtime_resume,
    trace_ufshcd_runtime_suspend,
    trace_ufshcd_system_suspend,
    trace_ufshcd_system_resume,
and trace_ufshcd_init

Where:
    hba->uic_link_state is passed to dev_state
    hba->curr_dev_pwr_mode is passed to link_state

This wasn't intentional so it's a bug. This change fixed this bug.

Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:34:41 -05:00
Christoph Hellwig
2e48e34911 scsi: vmw_pvscsi: switch to pci_alloc_irq_vectors
And simplify the interrupt handler by splitting the INTx case that needs
to deal with shared interrupts into a separate helper.

[mkp: typo fixage]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-11 22:31:03 -05:00
Theodore Ts'o
b907f2d519 ext4: avoid calling ext4_mark_inode_dirty() under unneeded semaphores
There is no need to call ext4_mark_inode_dirty while holding xattr_sem
or i_data_sem, so where it's easy to avoid it, move it out from the
critical region.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-11 22:14:49 -05:00
Theodore Ts'o
c755e25135 ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()
The xattr_sem deadlock problems fixed in commit 2e81a4eeed: "ext4:
avoid deadlock when expanding inode size" didn't include the use of
xattr_sem in fs/ext4/inline.c.  With the addition of project quota
which added a new extra inode field, this exposed deadlocks in the
inline_data code similar to the ones fixed by 2e81a4eeed.

The deadlock can be reproduced via:

   dmesg -n 7
   mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768
   mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc
   mkdir /vdc/a
   umount /vdc
   mount -t ext4 /dev/vdc /vdc
   echo foo > /vdc/a/foo

and looks like this:

[   11.158815] 
[   11.160276] =============================================
[   11.161960] [ INFO: possible recursive locking detected ]
[   11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G        W      
[   11.161960] ---------------------------------------------
[   11.161960] bash/2519 is trying to acquire lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960] 
[   11.161960] but task is already holding lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960] 
[   11.161960] other info that might help us debug this:
[   11.161960]  Possible unsafe locking scenario:
[   11.161960] 
[   11.161960]        CPU0
[   11.161960]        ----
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960] 
[   11.161960]  *** DEADLOCK ***
[   11.161960] 
[   11.161960]  May be due to missing lock nesting notation
[   11.161960] 
[   11.161960] 4 locks held by bash/2519:
[   11.161960]  #0:  (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e
[   11.161960]  #1:  (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a
[   11.161960]  #2:  (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622
[   11.161960]  #3:  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960] 
[   11.161960] stack backtrace:
[   11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G        W       4.10.0-rc3-00015-g011b30a8a3cf #160
[   11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[   11.161960] Call Trace:
[   11.161960]  dump_stack+0x72/0xa3
[   11.161960]  __lock_acquire+0xb7c/0xcb9
[   11.161960]  ? kvm_clock_read+0x1f/0x29
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  lock_acquire+0x106/0x18a
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  down_write+0x39/0x72
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ? _raw_read_unlock+0x22/0x2c
[   11.161960]  ? jbd2_journal_extend+0x1e2/0x262
[   11.161960]  ? __ext4_journal_get_write_access+0x3d/0x60
[   11.161960]  ext4_mark_inode_dirty+0x17d/0x26d
[   11.161960]  ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_try_add_inline_entry+0x69/0x152
[   11.161960]  ext4_add_entry+0xa3/0x848
[   11.161960]  ? __brelse+0x14/0x2f
[   11.161960]  ? _raw_spin_unlock_irqrestore+0x44/0x4f
[   11.161960]  ext4_add_nondir+0x17/0x5b
[   11.161960]  ext4_create+0xcf/0x133
[   11.161960]  ? ext4_mknod+0x12f/0x12f
[   11.161960]  lookup_open+0x39e/0x3fb
[   11.161960]  ? __wake_up+0x1a/0x40
[   11.161960]  ? lock_acquire+0x11e/0x18a
[   11.161960]  path_openat+0x35c/0x67a
[   11.161960]  ? sched_clock_cpu+0xd7/0xf2
[   11.161960]  do_filp_open+0x36/0x7c
[   11.161960]  ? _raw_spin_unlock+0x22/0x2c
[   11.161960]  ? __alloc_fd+0x169/0x173
[   11.161960]  do_sys_open+0x59/0xcc
[   11.161960]  SyS_open+0x1d/0x1f
[   11.161960]  do_int80_syscall_32+0x4f/0x61
[   11.161960]  entry_INT80_32+0x2f/0x2f
[   11.161960] EIP: 0xb76ad469
[   11.161960] EFLAGS: 00000286 CPU: 0
[   11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6
[   11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0
[   11.161960]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b

Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4eeed as a prereq)
Reported-by: George Spelvin <linux@sciencehorizons.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-11 21:50:46 -05:00
Chris Lapa
178478921b power: supply: bq27xxx: adds device tree binding documentation.
The bq27xxx binding is a standard i2c style binding, however the
deprecated compatible fields and different revisions warrant its own
documentation.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
8835cae5f2 power: supply: bq27xxx: adds specific support for bq27520-g4 revision.
This commit adds the BQ27520G4 chip definition to specifically match the
bq27520-G4 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
825e915ba2 power: supply: bq27xxx: adds specific support for bq27520-g3 revision.
This commit adds the BQ27520G3 chip definition to specifically match the
bq27520-G3 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
a5deb9a930 power: supply: bq27xxx: adds specific support for bq27520-g2 revision.
This commit adds the BQ27520G2 chip definition to specifically match the
bq27520-G2 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
68f2a813eb power: supply: bq27xxx: adds specific support for bq27520-g1 revision.
This commit adds the BQ27520G1 chip definition to specifically match the
bq27520-G1 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
71375aa7d6 power: supply: bq27xxx: adds specific support for bq27510-g3 revision.
This commit adds the BQ27510G3 chip definition to specifically match the
bq27510-G3 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Tested-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
698a2bf5fc power: supply: bq27xxx: adds specific support for bq27510-g2 revision.
This commit adds the BQ27510G2 chip definition to specifically match the
bq27510-G2 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
bd28177f3e power: supply: bq27xxx: adds specific support for bq27510-g1 revision.
This commit adds the BQ27510G1 chip definition to specifically match the
bq27510-G1 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
32833635b0 power: supply: bq27xxx: adds specific support for bq27500/1 revision.
This commit adds the BQ27500 chip definition to specifically match the
bq27500/1 functionality as described in the datasheet.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
6da6e4bdd3 power: supply: bq27xxx: rename BQ27510 allow for deprecation in future.
The BQ2751X definition exists only to satisfy backwards compatibility.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Chris Lapa
818e3012c2 power: supply: bq27xxx: rename BQ27500 allow for deprecation in future.
The BQ2750X definition exists only to satisfy backwards compatibility.

Signed-off-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 02:30:13 +01:00
Michal Suchanek
15df6d98ec power: supply: axp20x_usb_power: fix warning on 64bit
Casting of_device_get_match_data return value to int causes warning on 64bit
architectures.

../drivers/power/supply/axp20x_usb_power.c: In function
'axp20x_usb_power_probe':
../drivers/power/supply/axp20x_usb_power.c:297:21: warning: cast from
pointer to integer of different size [-Wpointer-to-int-cast]

Fixes: 0dcc70ca86 ("power: supply: axp20x_usb_power: use of_device_id
    data field instead of device_is_compatible")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-01-12 01:03:53 +01:00
Andrew Duggan
c7821d0f3d HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:15:00 +01:00
Andrew Duggan
279967a65b HID: rmi: Handle all Synaptics touchpads using hid-rmi
With the addition of HID and F12 support in the synaptics-rmi4 driver
touchpads which had been using the hid-multitouch driver can now
be support by the synaptics-rmi4 via hid-rmi. The advantage is that
additional data can be reported from the RMI registers which is not
available in the Microsoft Precision Touchpad collection.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:15:00 +01:00
Andrew Duggan
0b2c7a8973 HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4
The Synaptics RMI4 driver provides support for RMI4 devices. Instead of
duplicating the RMI4 processing code, make hid-rmi a transport driver
and register it with the Synaptics RMI4 core.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:15:00 +01:00
stephen hemminger
0719e72ccb netvsc: add rcu_read locking to netvsc callback
The receive callback (in tasklet context) is using RCU to get reference
to associated VF network device but this is not safe. RCU read lock
needs to be held. Found by running with full lockdep debugging
enabled.

Fixes: f207c10d98 ("hv_netvsc: use RCU to protect vf_netdev")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:13:53 -05:00
Marcel Hasler
fe6cc17f89 HID: hid-mf: add force feedback support for Mayflash DolphinBar and GameCube
The Mayflash DolphinBar and GameCube adapters have been tested and confirmed to
work using the hid-mf driver.

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:12:44 +01:00
Marcel Hasler
c7fc50aa6f HID: add device ID for updated Mayflash/Dragonrise GameCube adapter
The Mayflash GameCube adapter has received a firmware update which, among other
things, changes the device's PID. It also fixes enumeration, therefore the
updated firmware no longer requires HID_QUIRK_MULTI_INPUT.

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:12:44 +01:00
Robert Richter
171d87aca0 net: thunderx: Make hfunc variable const type in nicvf_set_rxfh()
>From struct ethtool_ops:

        int     (*set_rxfh)(struct net_device *, const u32 *indir,
                            const u8 *key, const u8 hfunc);

Change function arg of hfunc to const type.

V2: Fixed indentation.

Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:12:01 -05:00
Wei Yongjun
60dce04b81 net: thunderx: Fix error return code in nicvf_open()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 712c318534 ("net: thunderx: Program LMAC credits based on MTU")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:12:01 -05:00
Wei Yongjun
b40296fc73 sfc: efx_get_phys_port_id() can be static
Fixes the following sparse warning:

drivers/net/ethernet/sfc/efx.c:2337:5: warning:
 symbol 'efx_get_phys_port_id' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:12:01 -05:00
Randy Dunlap
dadf17334f PCI/MSI: Fix msi_capability_init() kernel-doc warnings
Fix kernel-doc warnings in pci/msi.c:

  ..//drivers/pci/msi.c:623: warning: No description found for parameter 'affd'
  ..//drivers/pci/msi.c:623: warning: Excess function parameter 'affinity' description in 'msi_capability_init'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-11 15:11:28 -06:00
Martynas Pumputis
4ecb1d83f6 vxlan: Set ports in flow key when doing route lookups
Otherwise, a xfrm policy with sport/dport being set cannot be matched.

Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:09:47 -05:00
hayeswang
19c0f40d4f r8152: fix the sw rx checksum is unavailable
Fix the hw rx checksum is always enabled, and the user couldn't switch
it to sw rx checksum.

Note that the RTL_VER_01 only support sw rx checksum only. Besides,
the hw rx checksum for RTL_VER_02 is disabled after
commit b9a321b48a ("r8152: Fix broken RX checksums."). Re-enable it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 16:08:57 -05:00
Daniel Keller
66e5c5ffc7 HID: multitouch: enable Surface 4 Type Cover Pro (non-JP) to report multitouch data
Nearly identical to the patch "multitouch: enable the Surface 4 Type Cover Pro
(JP) to report multitouch data"

We can now remove the support of the Surface 4 Type Cover Pro (not JP versions)
from hid-microsoft so it can properly report multi touch from the touchpad.

Signed-off-by: Daniel Keller <daniel.keller@gcd.de>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 22:08:49 +01:00
Fabio Estevam
caf3f562e1 PCI: imx6: Remove redundant "Link never came up" message
When a PCI card is not connected, the following messages are seen on mx6:

  imx6q-pcie 1ffc000.pcie: phy link never came up
  imx6q-pcie 1ffc000.pcie: Link never came up

The first one comes from the pcie-designware.c core file, so remove
the redundant one from the imx6 driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-01-11 15:01:11 -06:00
Bhumika Goyal
1acf8bca9c PCI: acpiphp_ibm: Make ibm_apci_table_attr __ro_after_init
ibm_apci_table_attr is not modified after being initialized by
ibm_acpiphp_init().  It is passed as an argument to the functions
sysfs_{remove/create}_bin_file(), but both the arguments are const.
Add __ro_after_init to its declaration.

[bhelgaas: changelog]
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2017-01-11 14:56:02 -06:00
Brendan McGrath
a89af4abdf HID: i2c-hid: Add sleep between POWER ON and RESET
Support for the Asus Touchpad was recently added. It turns out this
device can fail initialisation (and become unusable) when the RESET
command is sent too soon after the POWER ON command.

Unfortunately the i2c-hid specification does not specify the need for
a delay between these two commands. But it was discovered the Windows
driver has a 1ms delay.

As a result, this patch modifies the i2c-hid module to add a sleep
inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms.

See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further
details.

Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-11 21:55:35 +01:00
Rahul Krishnan
63d182abd7 PCI: rpadlpar: Remove unnecessary return statement
Remove unnecessary return statement using spatch tool.

Signed-off-by: Rahul Krishnan <mrahul.krishnan@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
2017-01-11 14:53:59 -06:00
Theodore Ts'o
670e9875eb ext4: add debug_want_extra_isize mount option
In order to test the inode extra isize expansion code, it is useful to
be able to easily create file systems that have inodes with extra
isize values smaller than the current desired value.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-01-11 15:32:22 -05:00
Arnaldo Carvalho de Melo
675f52b237 tools: Sync x86's vmx.h with the kernel
To pick the changes from:

  1b07304c58 ("KVM: nVMX: support descriptor table exits")

That adds entries to VMX_EXIT_REASONS, that is used by
tools/perf/arch/x86/util/kvm-stat.c.

This also picks the changes in:

  1dc35dacc1 ("KVM: nVMX: check host CR3 on vmentry and vmexit")

But these are not used in 'perf kvm stat', do it just to silence the
kernel/tools file cache coherency detector:

  $ make -C tools/perf
  make: Entering directory '/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ladi Prosek <lprosek@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-56uowkk8t5zje49a42asffcy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:02 -03:00
Jiri Olsa
bfacbe3bf2 perf record: Add switch-output time option argument
It's now possible to specify the threshold time for perf.data like:

  $ perf record --switch-output=30s ...

Once it's reached, the current data are dumped in to the
perf.data.<timestamp> file and session does on.

  $ perf record --switch-output=30s ...
  [ perf record: dump data: Woken up 44 times ]
  [ perf record: Dump perf.data.2017010213043746 ]
  ...

The time is expected to be a number with appended unit
character - s/m/h/d.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:02 -03:00
Jiri Olsa
0c5824498e perf record: Add switch-output size warning
Adding switch-output size warning if the requested
size of lower than the wakeup ring buffer size.

  $ perf record --switch-output=1K ls
  WARNING: switch-output data size lower than wakeup kernel buffer size (258K) expect bigger perf.data sizes
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:02 -03:00
Jiri Olsa
dc0c6127c2 perf record: Add switch-output size option argument
It's now possible to specify the threshold size for perf.data like:

  $ perf record --switch-output=2G ...

Once it's reached, the current data are dumped in to the
perf.data.<timestamp> file and session does on.

  $ perf record --switch-output=2G ...
  [ perf record: dump data: Woken up 7244 times ]
  [ perf record: Dump perf.data.2017010214093746 ]
  ...

The size is expected to be a number with appended unit character -
B/K/M/G.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:02 -03:00
Jiri Olsa
cb4e1ebb6a perf record: Change switch-output option to take optional argument
Next patches will add --switch-output option arguments, changing the
option to allow that and adding its default value to 'signal'.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00
Jiri Olsa
1b43b70484 perf record: Add struct switch_output
Next patches will add more --switch-output option arguments,
so preparing the data holder.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00
Jiri Olsa
9808143ba2 perf tools: Add unit_number__scnprintf function
Add unit_number__scnprintf function to display size units and use it in
-m option info message.

Before:
  $ perf record -m 10M ls
  rounding mmap pages size to 16777216 bytes (4096 pages)
  ...

After:
  $ perf record -m 10M ls
  rounding mmap pages size to 16M (4096 pages)
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-2-git-send-email-jolsa@kernel.org
[ Rename it to unit_number__scnprintf for consistency ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00
Soramichi Akiyama
e978be9ea2 perf evlist: Fix typo in perf_evlist__start_workload()
This patch fixes a typo: s/enable to/unable to/

Signed-off-by: Soramichi AKIYAMA <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: bcf3145fbe ("perf evlist: Enhance perf_evlist__start_workload()")
Link: http://lkml.kernel.org/r/20170110200006.e1f7a766b4faf1f107ae2e1b@m.soramichi.jp
[ Wasn't applying, fixed it up by hand, added Fixes: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00
Arnaldo Carvalho de Melo
017037ff3d perf trace: Allow specifying list of syscalls and events in -e/--expr/--event
Makes it easier to specify both events and syscalls (to be formatter
strace-like), i.e. previously one would have to do:

  # perf trace -e nanosleep --event sched:sched_switch usleep 1

Now it is possible to do:

  # perf trace -e nanosleep,sched:sched_switch usleep 1
     0.000 ( 0.021 ms): usleep/17962 nanosleep(rqtp: 0x7ffdedd61ec0) ...
     0.021 (         ): sched:sched_switch:usleep:17962 [120] S ==> swapper/1:0 [120])
     0.000 ( 0.066 ms): usleep/17962  ... [continued]: nanosleep()) = 0
  #

The old style --expr and using both -e and --event continues to work.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ieg6bakub4657l9e6afn85r4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11 16:48:01 -03:00