Currently the driver always writes DPTSR when setting up the hardware.
However, writing the register is only meaningful when the second source
for a plane is used, and the register is not even documented for SoCs
that do not have the second source.
So move the write behind a condition.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> # On R-Car M3-N
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-2-e77421093c05@ideasonboard.com
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Fixes: 11696c5e89 ("drm: Place Renesas drivers in a separate dir")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-9-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-7-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-6-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-4-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Every layer of vop2 should bind a window, and we also need to make
sure that this window is not used by other layer.
0x5 is a reserved layer sel value on rk3568, but it will select
Cluster3 on rk3588, configure unused layers to 0x5 will lead
alpha blending error on rk3588.
When we bind a window from layerM to layerN, we move the old window
on layerN to layerM.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214081719.3330518-3-andyshrk@163.com
The company name has update to Rockchip Electronics Co., Ltd.
since 2021.
And change Co.Ltd to Co., Ltd. to fix mail server warning:
DBL_SPAM(6.50)[co.ltd:url];
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214071333.3325308-1-andyshrk@163.com
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com> # ite-it6263.c
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204105827.1682632-2-u.kleine-koenig@baylibre.com
Include <linux/of.h> directly to get of_property_read_string_index().
Avoids the proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-7-tzimmermann@suse.de
Include <linux/property.h> directly to get device_property_read_u32().
Avoids the proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-6-tzimmermann@suse.de
Include <linux/mod_devicetable.h> directly to get struct of_device_id.
Avoids the proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-5-tzimmermann@suse.de
Include <linux/mod_devicetable.h> directly to get struct of_device_id.
Avoids the proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-4-tzimmermann@suse.de
Include <linux/of.h> directly to get of_device_is_available(). Avoids
the proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-3-tzimmermann@suse.de
Include <linux/of.h> directly to get of_parse_phandle(). Avoids the
proxy include via <linux/backlight.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011144632.90434-2-tzimmermann@suse.de
Without fonts, this fails to link:
drivers/gpu/drm/clients/drm_log.o: in function `drm_log_init_client':
drm_log.c:(.text+0x3d4): undefined reference to `get_default_font'
Select this, like the other users do.
Fixes: f7b42442c4 ("drm/log: Introduce a new boot logger to draw the kmsg on the screen")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212154003.1313437-1-arnd@kernel.org
The default statement is never used in real life. However, if it were
used for some reason then call drm_dev_exit() before returning.
Fixes: 8f2fc64773 ("drm/vc4: Fix reading of frame count on GEN5 / Pi4")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b61a81b2-0101-43bd-a4f6-09cf3a016484@stanley.mountain
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
It is permitted on situations such as system resume for plane->state
to be non-NULL, and that should be handled by freeing it. Do so.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202120343.33726-1-wahrenst@gmx.net
This commit fixes several miscellaneous documentation errors. Mostly,
delete/update comments that are outdated or are leftovers from past code
changes. Apart from that, remove double-spaces in several comments.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206153908.62429-1-mcanal@igalia.com
Provide the basic support required to enable the second HDMI TX port
found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-rk3588-hdmi1-v2-1-02cdca22ff68@collabora.com
If we do a GPU soft-reset, that's no longer fast reset. This also means
the slow reset fallback doesn't work because the MCU state is only reset
after a GPU soft-reset.
Let's move the retry logic to panthor_device_resume() to issue a
soft-reset between the fast and slow attempts, and patch
panthor_gpu_suspend() to only power-off the L2 when a fast reset is
requested.
v3:
- No changes
v2:
- Add R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-6-boris.brezillon@collabora.com
When the runtime PM resume callback returns an error, it puts the device
in a state where it can't be resumed anymore. Make sure we can recover
from such transient failures by calling pm_runtime_set_suspended()
explicitly after a pm_runtime_resume_and_get() failure.
v3:
- Add R-b/A-b
v2:
- Add a comment explaining potential races in
panthor_device_resume_and_get()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrian Larumbe <adrian.larumbe@collabora.com>
Acked-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-5-boris.brezillon@collabora.com
devfreq_{resume,suspend}_device() don't bother undoing the suspend_count
modifications if something fails, so either it assumes failures are
harmless, or it's super fragile/buggy. In either case it's not something
we can address at the driver level, so let's just assume failures are
harmless for now, like is done in panfrost.
v3:
- Add R-b
v2:
- Add R-b
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrian Larumbe <adrian.larumbe@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-4-boris.brezillon@collabora.com
The runtime PM resume operation is not guaranteed to succeed, but if it
fails, the device should be in a suspended state. Make sure we're robust
to resume failures in the unplug path.
v3:
- Fix typo
- Add R-bs
v2:
- Move the bit that belonged in the next commit
- Drop the panthor_device_unplug() changes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrian Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-3-boris.brezillon@collabora.com
WARN() will return true if the condition is true, false otherwise.
If we store the return of drm_WARN_ON() in ret, we lose the actual
error code.
v3:
- Add R-b
v2:
- Add R-b
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrian Larumbe <adrian.larumbe@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211075419.2333731-2-boris.brezillon@collabora.com
The alpha setup should start from the second layer, the current calculation
starts incorrectly from the first layer, a negative offset will be obtained
in the following formula:
offset = (mixer_id + zpos - 1) * 0x10
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209122943.2781431-7-andyshrk@163.com
This adds the glue code for the MIPI DSI2 bridge on Rockchip SoCs and
enables its use on the RK3588.
Right now the DSI2 controller is always paired with a DC-phy based on a
Samsung IP, so the interface values are set statically for now.
This stays true for the upcoming RK3576 as well.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Dmitry Yashin <dmt.yashin@gmail.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209231021.2180582-4-heiko@sntech.de
Add a Synopsys Designware MIPI DSI host DRM bridge driver for their
DSI2 host controller, based on the Rockchip version from the driver
rockchip/dw-mipi-dsi2.c in their vendor-kernel with phy & bridge APIs.
While the driver is heavily modelled after the previous IP, the register
set of this DSI2 controller is completely different and there are also
additional properties like the variable-width phy interface.
Tested-by: Daniel Semkowicz <dse@thaumatec.com>
Tested-by: Dmitry Yashin <dmt.yashin@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209231021.2180582-2-heiko@sntech.de
Add a module parameter, to increase the font size for HiDPI screen.
Even with CONFIG_FONT_TER16x32, it can still be a bit small to read.
In this case, adding drm_log.scale=2 to your kernel command line will
double the character size.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-7-jfalempe@redhat.com
Normally the console is already suspended when the graphic driver
suspend callback is called, but if the parameter no_console_suspend
is set, it might still be active.
So call console_stop()/console_start() in the suspend/resume
callbacks, to make sure it won't try to write to the framebuffer
while the graphic driver is suspended.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-6-jfalempe@redhat.com
drm_log is a simple logger that uses the drm_client API to print the
kmsg boot log on the screen. This is not a full replacement to fbcon,
as it will only print the kmsg. It will never handle user input, or a
terminal because this is better done in userspace.
Design decisions:
* It uses the drm_client API, so it should work on all drm drivers
from the start.
* It doesn't scroll the message, that way it doesn't need to redraw
the whole screen for each new message.
It also means it doesn't have to keep drawn messages in memory, to
redraw them when scrolling.
* It uses the new non-blocking console API, so it should work well
with PREEMPT_RT.
This patch also adds a Kconfig menu to select the drm client to use.
It can be overwritten on the kernel command line with:
drm_client_lib.active=log or drm_client_lib.active=fbdev
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de> # console API
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-3-jfalempe@redhat.com
Move the color conversions, blit and fill functions to drm_draw.c,
so that they can be re-used by drm_log.
drm_draw is internal to the drm subsystem, and shouldn't be used by
gpu drivers.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204160014.1171469-2-jfalempe@redhat.com
