Commit graph

97,728 commits

Author SHA1 Message Date
Linus Torvalds
a4b7fd7d34 inode->i_version rework for v4.16
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJabwjlAAoJEAAOaEEZVoIVeEEP/R84kZJjlZV/vNmFFvY46jM+
 0hpMHXRNym+nW1Du1CKNkesEUAY8ACAQIyzJh63Q72341QTDdz3+asHwPYRNOqdC
 PgryidPieojkNKQg+h7dmoKYlYh1xiCicvn66Q5PFb9B0lH36twekOK4X1qqJj8Z
 breRmRoFLka9looMSuYgwbErts023fmASalvGum6T0ZM/7F9hUj4O3OsQtKTLUNM
 VQ+gLJTQrUqrgzvWUwq3WTMa9YAaKP4oad8nsglNSpiVLG7WtURr5HokW9hAziqL
 k99Y+K2ni1wZJlNGJAyV7PyEG2ieI5Xn+LzM2RM+SndD1QHF2QXACmSTDYfL51k5
 G2RsKeTZvQPtX4qx9+vnCp/4oV6JduvCaq2Mt8SQb9nYZxKjs85TNLrARJv+85eQ
 zP0OTxlH1Gfu3j36n3cny4XemyMYYF4hCFYfRPqTGst37fgLBtfIfUSQ6jedoCK2
 Xcyb6ukGXMh6If/A7DSy91hvSSPrWSH7TPPsbfLy6o+wUOtpAGR4eXVlEuAiXrzc
 gnoAz85oIMUQae66LrdrPk1NyE59qOb24g/yU5gyRBSpi2+/aoboNCKaD73tgs/C
 XIMwGXLYmqkcud7IBQF0tHHiM+jsEkbSM4LUqRXSnqMdwNnS18Z4Q+JKqpdP0cii
 eRdenDvUfu8Gu1Y9vWBv
 =iihN
 -----END PGP SIGNATURE-----

Merge tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull inode->i_version rework from Jeff Layton:
 "This pile of patches is a rework of the inode->i_version field. We
  have traditionally incremented that field on every inode data or
  metadata change. Typically this increment needs to be logged on disk
  even when nothing else has changed, which is rather expensive.

  It turns out though that none of the consumers of that field actually
  require this behavior. The only real requirement for all of them is
  that it be different iff the inode has changed since the last time the
  field was checked.

  Given that, we can optimize away most of the i_version increments and
  avoid dirtying inode metadata when the only change is to the i_version
  and no one is querying it. Queries of the i_version field are rather
  rare, so we can help write performance under many common workloads.

  This patch series converts existing accesses of the i_version field to
  a new API, and then converts all of the in-kernel filesystems to use
  it. The last patch in the series then converts the backend
  implementation to a scheme that optimizes away a large portion of the
  metadata updates when no one is looking at it.

  In my own testing this series significantly helps performance with
  small I/O sizes. I also got this email for Christmas this year from
  the kernel test robot (a 244% r/w bandwidth improvement with XFS over
  DAX, with 4k writes):

    https://lkml.org/lkml/2017/12/25/8

  A few of the earlier patches in this pile are also flowing to you via
  other trees (mm, integrity, and nfsd trees in particular)".

* tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: (22 commits)
  fs: handle inode->i_version more efficiently
  btrfs: only dirty the inode in btrfs_update_time if something was changed
  xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementing
  fs: only set S_VERSION when updating times if necessary
  IMA: switch IMA over to new i_version API
  xfs: convert to new i_version API
  ufs: use new i_version API
  ocfs2: convert to new i_version API
  nfsd: convert to new i_version API
  nfs: convert to new i_version API
  ext4: convert to new i_version API
  ext2: convert to new i_version API
  exofs: switch to new i_version API
  btrfs: convert to new i_version API
  afs: convert to new i_version API
  affs: convert to new i_version API
  fat: convert to new i_version API
  fs: don't take the i_lock in inode_inc_iversion
  fs: new API for handling inode->i_version
  ntfs: remove i_version handling
  ...
2018-01-29 13:33:53 -08:00
Linus Torvalds
0a4b6e2f80 Merge branch 'for-4.16/block' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
 "This is the main pull request for block IO related changes for the
  4.16 kernel. Nothing major in this pull request, but a good amount of
  improvements and fixes all over the map. This contains:

   - BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
     Paolo.

   - Support for SMR zones for deadline and mq-deadline from Damien and
     Christoph.

   - Set of fixes for bcache by way of Michael Lyle, including fixes
     from himself, Kent, Rui, Tang, and Coly.

   - Series from Matias for lightnvm with fixes from Hans Holmberg,
     Javier, and Matias. Mostly centered around pblk, and the removing
     rrpc 1.2 in preparation for supporting 2.0.

   - A couple of NVMe pull requests from Christoph. Nothing major in
     here, just fixes and cleanups, and support for command tracing from
     Johannes.

   - Support for blk-throttle for tracking reads and writes separately.
     From Joseph Qi. A few cleanups/fixes also for blk-throttle from
     Weiping.

   - Series from Mike Snitzer that enables dm to register its queue more
     logically, something that's alwways been problematic on dm since
     it's a stacked device.

   - Series from Ming cleaning up some of the bio accessor use, in
     preparation for supporting multipage bvecs.

   - Various fixes from Ming closing up holes around queue mapping and
     quiescing.

   - BSD partition fix from Richard Narron, fixing a problem where we
     can't mount newer (10/11) FreeBSD partitions.

   - Series from Tejun reworking blk-mq timeout handling. The previous
     scheme relied on atomic bits, but it had races where we would think
     a request had timed out if it to reused at the wrong time.

   - null_blk now supports faking timeouts, to enable us to better
     exercise and test that functionality separately. From me.

   - Kill the separate atomic poll bit in the request struct. After
     this, we don't use the atomic bits on blk-mq anymore at all. From
     me.

   - sgl_alloc/free helpers from Bart.

   - Heavily contended tag case scalability improvement from me.

   - Various little fixes and cleanups from Arnd, Bart, Corentin,
     Douglas, Eryu, Goldwyn, and myself"

* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
  block: remove smart1,2.h
  nvme: add tracepoint for nvme_complete_rq
  nvme: add tracepoint for nvme_setup_cmd
  nvme-pci: introduce RECONNECTING state to mark initializing procedure
  nvme-rdma: remove redundant boolean for inline_data
  nvme: don't free uuid pointer before printing it
  nvme-pci: Suspend queues after deleting them
  bsg: use pr_debug instead of hand crafted macros
  blk-mq-debugfs: don't allow write on attributes with seq_operations set
  nvme-pci: Fix queue double allocations
  block: Set BIO_TRACE_COMPLETION on new bio during split
  blk-throttle: use queue_is_rq_based
  block: Remove kblockd_schedule_delayed_work{,_on}()
  blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
  blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
  lib/scatterlist: Fix chaining support in sgl_alloc_order()
  blk-throttle: track read and write request individually
  block: add bdev_read_only() checks to common helpers
  block: fail op_is_write() requests to read-only partitions
  blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
  ...
2018-01-29 11:51:49 -08:00
Linus Torvalds
b5856f97b3 regmap: Updates for v4.16
A very busy release for regmap, all fairly specialist stuff but useful:
 
  - Support for disabling locking from Bartosz Golaszewski, allowing
    users that handle their own locking to save some overhead.
  - Support for hwspinlocks in syscons in MFD from Baolin Wang, this is
    going through the regmap tree since the first users turned up some
    some cases that needed interface tweaks with 0 being used as a syscon
    identifier.
  - Support for devices with no read or write flag from Andrew F. Davis.
  - Basic support for devices on SoundWire buses from Vinod Koul.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlpvTfYTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0Cd8B/4zeYHL73moxvAxAH/99HGVCHQHcR4k
 hdLaGHs8JN5ZLoNCqixFdkffsdBM2H06JPOnBZMHHcb5Pf7KL3OEgPNeiMUpzxUL
 0EcXoZiJz0HzRVwi6M9nt3Bv41rD5+v9nS6oolsqbU1b6w5ofZQ7ENeN+nhxLk54
 Wy8avQ3VDmiKsSAAXDMEA6i58Zz7dT1ibyyOcYGyEdt7iFOL8d0aM4c3cAGHfL+E
 Ss9/dyeY/8glLDy+rxp5hZHkLY7FKFDQcD1/FSR26DHslc0Swa9mn/0SmhF0pQWe
 RVEn63b4B5iT0E8brlWHwNh466jT6+fyJKzYDzEM+v1RP4qUmluFubjK
 =X/P5
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A very busy release for regmap, all fairly specialist stuff but
  useful:

   - Support for disabling locking from Bartosz Golaszewski, allowing
     users that handle their own locking to save some overhead.

   - Support for hwspinlocks in syscons in MFD from Baolin Wang, this is
     going through the regmap tree since the first users turned up some
     some cases that needed interface tweaks with 0 being used as a
     syscon identifier.

   - Support for devices with no read or write flag from Andrew F.
     Davis.

   - Basic support for devices on SoundWire buses from Vinod Koul"

* tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  mfd: syscon: Add hardware spinlock support
  regmap: Allow empty read/write_flag_mask
  regcache: flat: Un-inline index lookup from cache access
  regmap: Add SoundWire bus support
  regmap: Add one flag to indicate if a hwlock should be used
  regmap: debugfs: document why we don't create the debugfs entries
  regmap: debugfs: emit a debug message when locking is disabled
  regmap: use proper part of work_buf for storing val
  regmap: potentially duplicate the name string stored in regmap
  regmap: Disable debugfs when locking is disabled
  regmap: rename regmap_lock_unlock_empty() to regmap_lock_unlock_none()
  regmap: allow to disable all locking mechanisms
  regmap: Remove the redundant config to select hwspinlock
2018-01-29 11:35:24 -08:00
Linus Torvalds
dc38787a58 regulator: Changes for v4.16
This is a quiet release in terms of code volume but a fairly big one in
 terms of framework changes - we've got one long awaited feature in the
 form of runtime configuration of suspend and the start of coupled
 regulator support too:
 
  - Support for modifying the voltage and enable configuration devices
    will have in suspend, contributed by Chunyan Zhang.
  - Support for the Spreadtrum SC2731, contributed by Erick Chen.
  - The start of changes to support coupled regulators from Maciej
    Purski, the rest of the series should arrive for v4.17.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlpvHYcTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0HzDB/sGUx2duXDCJaJjTdM2qFUldC6rU1Cf
 kiXAuAvphsxo0ZBgzzkgRogEfUwrWLXcXWjEdTInoUeTc6j5O8AU/39xrnK4qWHx
 O3NsX1JlEw0G7NCovocJfC8juok2D9VoSrYFCiDBx0jUxdhc7P4rlYtr1IovicfC
 LJPAHniW1DREnZrXRL+ivtgN9+nlJlTFtChgppDjsenSJYX4fF7l37ynNIrTJ9wp
 7jchZGPsN62JVCjIqRlkJzrkPfxBaRLqLs7mceI0HTbdWFH0CqKHxC7RsbPisj48
 MB8Li2/WBX+x7TLdewTZfMZ65hsCAITDysQ3jAbBoS7864jddEzomsTU
 =SPQ9
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is a quiet release in terms of code volume but a fairly big one
  in terms of framework changes - we've got one long awaited feature in
  the form of runtime configuration of suspend and the start of coupled
  regulator support too:

   - Support for modifying the voltage and enable configuration devices
     will have in suspend, contributed by Chunyan Zhang.

   - Support for the Spreadtrum SC2731, contributed by Erick Chen.

   - The start of changes to support coupled regulators from Maciej
     Purski, the rest of the series should arrive for v4.17"

* tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Fix build error
  regulator: core: Refactor regulator_list_voltage()
  regulator: core: Move of_find_regulator_by_node() to of_regulator.c
  regulator: add PM suspend and resume hooks
  regulator: empty the old suspend functions
  regulator: leave one item to record whether regulator is enabled
  regulator: make regulator voltage be an array to support more states
  regulator: added support for suspend states
  regulator: qcom_spmi: Use regmap helpers for enable/disable/is_enabled callback
  regulator: sc2731: Fix defines for SC2731_WR_UNLOCK and SC2731_PWR_WR_PROT_VALUE
  regulator: fix incorrect indentation of two assignment statements
  regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC
  regulator: Add Spreadtrum SC2731 regulator documentation
  regulator: Update code examples in documentation
  MAINTAINERS: regulator: Add Documentation/power/regulator/
  regulator: tps65218: Add NULL test for devm_kzalloc call
  regulator: tps65218: Remove unused enum tps65218_regulators
2018-01-29 11:32:44 -08:00
Linus Torvalds
8e3264710c spi: Updates for v4.16
Quite a quiet release for SPI, there are no changes at all to the core
 and not that many changes to drivers.  Highlights of those driver
 changes include:
 
  - SH MSIOF support for GPIO chip selects contributed by Geert
    Uytterhoeven.
  - Full duplex support for a3700 contributed by Maxime Chevallier.
  - Support for DMA transfers on Atmel devices that require a bounce
    buffer contributed by Radu Pirea.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlpvGpcTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0EFXB/9A9mzuFpMpurIcyUyq9pwmu2Xss+Fo
 0/YiyrXLMfmH+6lEaCekfNOsHYEbb9KnbaNThxD1QUEt7wQ5G3UAt1vPHzMbRd/w
 C6JRoTnEZHxj7mmIanXzqzNVhp2qhlQWr0BGwte46VyDci7RZEtqHKjxdeIpS+ll
 Ye4zIKXaO4h6Unpv9o9KMOHG6SHyTuA9QP1Pi/6sGYV67uCw4NPnonacCAC1M++L
 gLaVwWw7IBELg0X9gqH9mn6kTV0ppGGSflm3zFjY+f8EZmCiZ4wVMjPYi+ZTfGrS
 tQVTF4kvm/W0bPcqxHv3dd5ShCKIEu7g3xVshFu9M8TivMzW80eZfuF2
 =Kj+5
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite a quiet release for SPI, there are no changes at all to the core
  and not that many changes to drivers. Highlights of those driver
  changes include:

   - SH MSIOF support for GPIO chip selects contributed by Geert
     Uytterhoeven.

   - Full duplex support for a3700 contributed by Maxime Chevallier.

   - Support for DMA transfers on Atmel devices that require a bounce
     buffer contributed by Radu Pirea"

* tag 'spi-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (31 commits)
  spi: dw: Remove unused members from struct chip_data
  spi: orion: Fix a resource leak if the optional "axi" clk is deferred
  spi: a3700: Remove endianness swapping for full-duplex transfers
  spi: a3700: Remove endianness swapping functions when accessing FIFOs
  spi: a3700: Add full-duplex support
  spi: a3700: Allow to enable or disable FIFO mode
  spi: a3700: Set frequency limits at startup
  spi: a3700: Clear DATA_OUT when performing a read
  spi: orion: Fix clock resource by adding an optional bus clock
  spi: s3c64xx: add SPDX identifier
  spi: imx: do not access registers while clocks disabled
  spi: atmel: Implements transfers with bounce buffer
  spi: sh-msiof: Fix timeout failures for TX-only DMA transfers
  spi: spi-fsl-dspi: account for const type of of_device_id.data
  spi: bcm53xx: simplify reading SPI data
  spi: sirf: account for const type of of_device_id.data
  spi: pxa2xx: Use gpiod_put() not gpiod_free()
  spi: pxa2xx: avoid redundant gpio_to_desc(desc_to_gpio()) round-trip
  spi: sh-msiof: Document hardware limitations related to chip selects
  spi: sh-msiof: Implement cs-gpios configuration
  ...
2018-01-29 11:30:16 -08:00
Linus Torvalds
0bae60fcee There are two major achievements for MMC in this release, which deserves to be
specially highlighted.
 
 First, we have converted the MMC block device from using the legacy blk
 interface into using the modern blkmq interface. Not only do we get all the
 nice effects from using blkmq, but it also means that new fresh nice code
 replaces old rusty code. Great news to everybody that cares about MMC/SD!
 
 It should also be noted that converting to blkmq has not been trivial, mostly
 because of that we have been carrying too much of MMC specific optimizations
 for the I/O request path, rather than striving to move these to the generic blk
 layer. Hopefully we won't be doing that mistake, ever again.
 
 Special thanks to Adrian Hunter (Intel) and to Linus Walleij (Linaro), who both
 have been working on this for quite some time!
 
 Second, on top of the blkmq deployment, we have enabled full support the eMMC
 command queuing feature, introduced in the eMMC v.5.1 spec. This also includes
 an implementation of a host driver library, supporting the corresponding CQHCI
 HW. Ideally, those controllers that supports CQHCI should only need some minor
 adaptations to make this play.
 
 So far the sdhci-pci driver for the Intel GLKs and the sdhci-of-arasan driver
 used on Rockchip RK3399, have enabled support for eMMC command queueing.
 
 Worth to highlight is also that, implementing the eMMC command queuing support
 has been a collaborative effort, as several people from Codeaurora, Rockchip,
 Intel and Linaro have been involved. However, the work has been driven by
 Adrian Hunter (Intel).
 
 In some shadow of the above, here are the rest of the highlights:
 
 MMC core:
  - Don't remove non-removable cards during system suspend
  - Add a slot-gpio helper to check capability of GPIO WP detection
 
 MMC host:
  - sdhci: Cleanups and improvements of some wakeup related code
  - sdhci-pci-arasan: New variant to support Arasan PCI HW with integrated phy
  - sdhci-acpi: Avoid broken UHS transfer modes on Intel CHT
  - sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400
  - sdhci_f_sdh30: Add ACPI support
  - sdhci-esdhc-imx: Enable/disable clock at runtime suspend/resume
  - sdhci-of-esdhc: A few minor fixes
  - mmci: Add support for new STM32 variant
  - renesas_sdhi: enable R-Car D3 (r8a77995) support
  - tmio/renesas_sdhi: Re-structuring, cleanups and modernizations
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJabvFuAAoJEP4mhCVzWIwp7qIQAMFyLGkmJya9woUDgPlKJZMD
 pasQtW5/60ASEid4hiZsGQgDrvmq+8jba+3O6QhL/maTX69nhtQXTGvbyHlIYjIG
 J8z1oaflYz3tQ2w5I+85mkDciQEECH7rIiXMwZn1WUKByptnSJaqA95b2eiB5b+/
 zoCx9ZWCKeWBxuXsBf8E/Cyt7H6VndDVtIYzcmNYb8x0SdKGj8cjQ8YvtP+fIse1
 5bSWzfSO33T+gHW0mxX1C9bBjSVTLB2yYyiTCdd8grUIimexatgcpj4VA1zWPNcA
 EJYeXwUCULNMDobLVEd0XuScIX92ZWiKd2ITtuwh1OaLltGjubt6K6UCa3ecZfIv
 RbzCTB+YpkyNGYnf+aQlbLF5OO9IWVcfMP8hTtHdcm7YbKnI2u6IFhDR4mHtFWpx
 e3HZFZoIVwtBRxUwM8e2rNs0YfA96fn7+5YWqJ77pSa8rxGmIXE3Znf911MRHxej
 faDoYYAFSxBlvHujQ4a/yxHRldaFGkelNCjvjnIC0+1O++im9oi3c8Agg8SYSR9H
 dKckEBEXTVPz6PzXgmy5+fgNZ1UK1LLkAdVrdMBcoIY+BUi9xUBlu6Wng3Qr86Ht
 YD/WO/2dLewPAx9qVnBO6L001IbS//dr+qPFjaQdkXP6F1KAKQRmrs2QngKPks2x
 PQB46gFuxdLj6Ykg12wK
 =kUV+
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "There are two major achievements for MMC in this release, which
  deserves to be specially highlighted.

  First, we have converted the MMC block device from using the legacy
  blk interface into using the modern blkmq interface. Not only do we
  get all the nice effects from using blkmq, but it also means that new
  fresh nice code replaces old rusty code. Great news to everybody that
  cares about MMC/SD!

  It should also be noted that converting to blkmq has not been trivial,
  mostly because of that we have been carrying too much of MMC specific
  optimizations for the I/O request path, rather than striving to move
  these to the generic blk layer. Hopefully we won't be doing that
  mistake, ever again.

  Special thanks to Adrian Hunter (Intel) and to Linus Walleij (Linaro),
  who both have been working on this for quite some time!

  Second, on top of the blkmq deployment, we have enabled full support
  the eMMC command queuing feature, introduced in the eMMC v.5.1 spec.
  This also includes an implementation of a host driver library,
  supporting the corresponding CQHCI HW. Ideally, those controllers that
  supports CQHCI should only need some minor adaptations to make this
  play.

  So far the sdhci-pci driver for the Intel GLKs and the sdhci-of-arasan
  driver used on Rockchip RK3399, have enabled support for eMMC command
  queueing.

  Worth to highlight is also that, implementing the eMMC command queuing
  support has been a collaborative effort, as several people from
  Codeaurora, Rockchip, Intel and Linaro have been involved. However,
  the work has been driven by Adrian Hunter (Intel).

  In some shadow of the above, here are the rest of the highlights:

  MMC core:
   - Don't remove non-removable cards during system suspend
   - Add a slot-gpio helper to check capability of GPIO WP detection

  MMC host:
   - sdhci: Cleanups and improvements of some wakeup related code
   - sdhci-pci-arasan: New variant to support Arasan PCI HW with integrated phy
   - sdhci-acpi: Avoid broken UHS transfer modes on Intel CHT
   - sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400
   - sdhci_f_sdh30: Add ACPI support
   - sdhci-esdhc-imx: Enable/disable clock at runtime suspend/resume
   - sdhci-of-esdhc: A few minor fixes
   - mmci: Add support for new STM32 variant
   - renesas_sdhi: enable R-Car D3 (r8a77995) support
   - tmio/renesas_sdhi: Re-structuring, cleanups and modernizations"

* tag 'mmc-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (96 commits)
  mmc: mmci: fix error return code in mmci_probe()
  mmc: davinci: suppress error message on EPROBE_DEFER
  mmc: davinci: dont' use module_platform_driver_probe()
  mmc: tmio: hide unused tmio_mmc_clk_disable/tmio_mmc_clk_enable functions
  mmc: mmci: Add STM32 variant
  mmc: mmci: Add support for setting pad type via pinctrl
  mmc: mmci: Don't pretend all variants to have OPENDRAIN bit
  mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag
  mmc: mmci: Don't pretend all variants to have MMCIMASK1 register
  mmc: tmio: refactor .get_ro hook
  mmc: slot-gpio: add a helper to check capability of GPIO WP detection
  mmc: tmio: remove dma_ops from tmio_mmc_host_probe() argument
  mmc: tmio: move {tmio_}mmc_of_parse() to tmio_mmc_host_alloc()
  mmc: tmio: move clk_enable/disable out of tmio_mmc_host_probe()
  mmc: tmio: ioremap memory resource in tmio_mmc_host_alloc()
  mmc: sh_mmcif: remove redundant initialization of 'opc'
  mmc: sdhci: Rework sdhci_enable_irq_wakeups()
  mmc: sdhci: Handle failure of enable_irq_wake()
  mmc: sdhci: Stop exporting sdhci_enable_irq_wakeups()
  mmc: sdhci-pci: Use device wakeup capability to determine MMC_PM_WAKE_SDIO_IRQ capability
  ...
2018-01-29 11:26:11 -08:00
Linus Torvalds
0fc7e74663 MTD changes:
Core changes:
   * Rework core functions to avoid duplicating generic checks in
     NAND/OneNAND sub-layers
   * Update the MAINTAINERS entry to reflect the fact that MTD
     maintainers now use a single git tree
 
   Driver changes:
   * CFI: use macros instead of inline functions to limit stack
     usage and make KASAN happy
 
 NAND changes:
   Core changes:
   * Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
   * Introduce the ->exec_op() infrastructure
   * Rework NAND buffers handling
   * Fix ECC requirements for K9F4G08U0D
   * Fix nand_do_read_oob() to return the number of bitflips
   * Mark K9F1G08U0E as not supporting subpage writes
 
   Driver changes:
   * MTK: Rework the driver to support new IP versions
   * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
     DT support
   * Marvell: Add a new driver to replace the pxa3xx one
 
 SPI NOR changes:
   Core changes:
   * Add support to new ISSI and Cypress/Spansion memory parts.
   * Fix support of Micron memories by checking error bits in the FSR.
   * Fix update of block-protection bits by reading back the SR.
   * Restore the internal state of the SPI flash memory when removing the
     device.
 
   Driver changes:
   * Maintenance for Freescale, Intel and Metiatek drivers.
   * Add support of the direct access mode for the Cadence QSPI controller.
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJabumAIxxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcA0eAP/1s4u/Vs0RaDL2Jog0z+3fdx9HKYTK01hiQoe5Vf
 0ouGH0lR9usAmmJlXxxNpBHFvJxsofJoCNaciHAiydCMBpX6oAQMYMMcPs4Qo7C/
 vydLBDBmKZNyQ9dv6FbjP+3Y/5drIGF+VfxXZwhGA3lwP5CSVbB9ndI8+A5bScIV
 m2RMOA/lorbNHQahEkt7FHd92yQxBXlbhHBf5Foy2dGhO3rpTWzL/d1KPAkcfeli
 ehjfazkbuwFxGlYBFsrWxsnm0zqrqIWtdTE5/0i8iC1FfbxL5KjRnAFg8AsXIepn
 C2rCAxM/890mIFypT/8xhu+1u8+Bmb1r/pA9G+f3zpkiAHcUGC3eMO3IhX/jkcAd
 jCD/zeaSW8uHrBoJA6mGhO1tkBA97w15XCQC38UZkRMaJsY8Rv50ST4afA4in7mi
 bdRnpOOBYsBv9LvLm+FzQ0EgRQl642mFY8rae+gAjkF/zt8zGHSt6UNgtwMRxqZJ
 ns/TyhNm7roYV3cPpAgOWK//9XAGII9YZ6x9XmPNZLq62yf+zqJnfeuy7bXATRfG
 GGYk6wd+VdN+Ax2mqVKEJMCArjz0kLAHOtpIwv2/RxB1dlNMdugaDPUcqFteZbXh
 wlgORLXLqZ8jfy+ITFB5HMDs/NMyuRr815jdPGZafHIx8xOBQD32Izv7cpYctfWU
 f2NU
 =Mxo2
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "MTD core changes:
   - Rework core functions to avoid duplicating generic checks in
     NAND/OneNAND sub-layers
   - Update the MAINTAINERS entry to reflect the fact that MTD
     maintainers now use a single git tree

  MTD driver changes:
   - CFI: use macros instead of inline functions to limit stack usage
     and make KASAN happy

  NAND core changes:
   - Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
   - Introduce the ->exec_op() infrastructure
   - Rework NAND buffers handling
   - Fix ECC requirements for K9F4G08U0D
   - Fix nand_do_read_oob() to return the number of bitflips
   - Mark K9F1G08U0E as not supporting subpage writes

  NAND driver changes:
   - MTK: Rework the driver to support new IP versions
   - OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and
     fix DT support
   - Marvell: Add a new driver to replace the pxa3xx one

  SPI NOR core changes:
   - Add support to new ISSI and Cypress/Spansion memory parts.
   - Fix support of Micron memories by checking error bits in the FSR.
   - Fix update of block-protection bits by reading back the SR.
   - Restore the internal state of the SPI flash memory when removing
     the device.

  SPI NOR driver changes:
   - Maintenance for Freescale, Intel and Metiatek drivers.
   - Add support of the direct access mode for the Cadence QSPI
     controller"

* tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits)
  mtd: nand: sunxi: Fix ECC strength choice
  mtd: nand: gpmi: Fix subpage reads
  mtd: nand: Fix build issues due to an anonymous union
  mtd: nand: marvell: Fix missing memory allocation modifier
  mtd: nand: marvell: remove redundant variable 'oob_len'
  mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
  mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
  mtd: Remove duplicate checks on mtd_oob_ops parameter
  mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing
  mtd: mtdpart: Make ECC stat handling consistent
  mtd: onenand: omap2: print resource using %pR format string
  mtd: mtk-nor: modify functions' name more generally
  mtd: onenand: samsung: remove incorrect __iomem annotation
  MAINTAINERS: Add entry for Marvell NAND controller driver
  ARM: OMAP2+: Remove gpmc-onenand
  mtd: onenand: omap2: Configure driver from DT
  mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
  mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
  mtd: onenand: omap2: Convert to use dmaengine for memcpy
  mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
  ...
2018-01-29 11:11:56 -08:00
Linus Torvalds
bc4e118355 - New Drivers
- Add support for RAVE Supervisory Processor
 
  - (Re)moved drivers
    - Move Realtek Card Reader Driver to Misc
 
  - New Device Support
    - Add support for Pinctrl to axp20x
 
  - New Functionality
    - Add resume support; atmel-flexcom
 
  - Fix-ups
    - Split MFD (mfd) and userspace handlers (platform); cros_ec
    - Fix trivial (whitespace, spelling) issue(s); pcf50633-core
    - Clean-up error handling; ab8500-debugfs
    - General tidying up; tmio_core
    - Kconfig fix-ups; qcom-pm8xxx
    - Licensing changes (SPDX); stm32-lptimer, stm32-timers
    - Device Tree fixups; mc13xxx
    - Simplify/remove unused code; cros_ec_spi, axp20x, ti_am335x_tscadc,
                                   kempld-core, intel_soc_pmic_core.c,
 				  ab8500-debugfs
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJaYK9SAAoJEFGvii+H/HdhTBwP/iQYlVikcs728oQqYhPKcafc
 cH8OxA6mPoD8BDvJkfjyQ/VXFo+OHZQxs7arUYMBpHweqhRGID/uDJItkZ05O7RI
 0AJoqedczfgQzmEFvos4lpnm2kIdxXZstFqQBA0vLqvbOVd8U+LUiQ/2ilOELxa/
 AYUiIKO/gY0jw/1cXkYWMbLI8Z14u04OFrUzFIu8M6KSdMKyQ5RLvSAISL4l/oyO
 fWvYL8ngdmC7BOw0OF7kc5S5KaevP0qZ9kBNb1e0Y1gbmm1b8WhH5eaAcuWD3tR3
 mxa/lQNVLIDfp1XQzTEVbWFmaic5+i4c05WrVbqZ7Q8jgQGrXtwmdcqYc6ifQJoT
 1/3IH7YTYV9+k/B5cSP9m+CCY4BsNjnqXcIW1A0FLJkmCLfU8jvMBBaapXVZk23h
 rgpRYEWRSVGQEa2E/9tDSndpqUcllWriSKYcTtNGX65kIiP1+VQYpUps/Ff7X8bj
 CiPGIGP4jYywk4SAlTjs0Dothh/g3+4CtyMK4ARei9z1P5prKuPMHyG6Xf0PtTMv
 qLD+0vplL2AbpdlpH8U1Eqda+TxM7RinV2US/FGnHJqUwukWOdZGr+3t/uU54Sfu
 TsQe9gCdURvJnGvMXdHO11/jBIQg4PzTKhJfnfONCo5kZMwJ1athhHVqguJyy6US
 SNJBlEDaO4rVMTdbYo9b
 =k4Mk
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for RAVE Supervisory Processor

  Moved drivers:
   - Move Realtek Card Reader Driver to Misc

  New Device Support:
   - Add support for Pinctrl to axp20x

  New Functionality:
   - Add resume support to atmel-flexcom

  Fix-ups:
   - Split MFD (mfd) and userspace handlers (platform) in cros_ec
   - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
   - Clean-up error handling in ab8500-debugfs
   - General tidying up in tmio_core
   - Kconfig fix-ups for qcom-pm8xxx
   - Licensing changes (SPDX) to stm32-lptimer, stm32-timers
   - Device Tree fixups in mc13xxx
   - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
     kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"

* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
  mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
  mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
  atmel_flexcom: Support resuming after a chip reset
  mfd: Remove duplicate includes
  dt-bindings: mfd: mc13xxx: Add the unit address to sysled
  mfd: stm32: Adopt SPDX identifier
  mfd: axp20x: Add pinctrl cell for AXP813
  mfd: pm8xxx: Make elegible for COMPILE_TEST
  mfd: kempld-core: Use resource_size function on resource object
  mfd: tmio: Move register macros to tmio_core.c
  mfd: cros ec: spi: Simplify delay handling between SPI messages
  mfd: palmas: Assign the right powerhold mask for tps65917
  mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
  mfd: ti_am335x_tscadc: Remove redundant assignment to node
  mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
  dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
  watchdog: Add RAVE SP watchdog driver
  mfd: Add driver for RAVE Supervisory Processor
  serdev: Introduce devm_serdev_device_open()
  ...
2018-01-29 10:59:24 -08:00
Linus Torvalds
1a9a126b50 ACPI updates for v4.16-rc1
- Update the ACPICA kernel code to upstream revision 20171215 including:
    * Support for ACPI 6.0A changes in the NFIT table (Bob Moore).
    * Local 64-bit divide in string conversions (Bob Moore).
    * Fix for a regression in acpi_evaluate_object_type() (Bob Moore).
    * Fixes for memory leaks during package object resolution (Bob Moore).
    * Deployment of safe version of strncpy() (Bob Moore).
    * Debug and messaging updates (Bob Moore).
    * Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob Moore).
    * Null pointer dereference avoidance in Op and cleanups (Colin Ian King).
    * Fix for memory leak from building prefixed pathname (Erik Schmauss).
    * Coding style fixes, disassembler and compiler updates (Hanjun Guo,
      Erik Schmauss).
    * Additional PPTT flags from ACPI 6.2 (Jeremy Linton).
    * Fix for an off-by-one error in acpi_get_timer_duration() (Jung-uk Kim).
    * Infinite loop detection timeout and utilities cleanups (Lv Zheng).
    * Windows 10 version 1607 and 1703 OSI strings (Mario Limonciello).
 
  - Update ACPICA information in MAINTAINERS to reflect the current
    status of ACPICA maintenance and rename a local variable in one
    function to match the corresponding upstream code (Rafael Wysocki).
 
  - Clean up ACPI-related initialization on x86 (Andy Shevchenko).
 
  - Add support for Intel Merrifield to the ACPI GPIO code (Andy
    Shevchenko).
 
  - Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav).
 
  - Fix the ACPI Generic Event Device (GED) driver to free IRQs on
    shutdown and clean up the PCI IRQ Link driver (Sinan Kaya).
 
  - Make the GHES code call into the AER driver on all errors and
    clean up the ACPI APEI code (Colin Ian King, Tyler Baicar).
 
  - Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
    Kulkarni).
 
  - Add a lid switch blacklist to the ACPI button driver and make it
    print extra debug messages on lid events (Hans de Goede).
 
  - Add quirks for Asus GL502VSK and UX305LA to the ACPI battery
    driver and clean it up somewhat (Bjørn Mork, Kai-Heng Feng).
 
  - Add device link for CHT SD card dependency on I2C to the ACPI
    LPSS (Intel SoCs) driver and make it avoid creating platform
    device objects for devices without MMIO resources (Adrian Hunter,
    Hans de Goede).
 
  - Fix the ACPI GPE mask kernel command line parameter handling
    (Prarit Bhargava).
 
  - Fix the handling of (incorrectly exposed) backlight interfaces
    without LCD (Hans de Goede).
 
  - Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
    Uytterhoeven).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJaY/BrAAoJEILEb/54YlRxR10P/1dVxfhLiGBrwKzA1urr71Vg
 LH6ZdlIlihyu9a1PZHjfO72IuZCMSkSnoJUPJPFK6FNA0hIDqsP+hC8gcknCxnAU
 i6r2ZzQesOzzjGblpASvdDg0GkYe9r6sHpUQ0xW/hnijamforflGveW1bagbnFuI
 gvT6m6+lMJwBd0NrWhQiTJmTuSTwgJBXDA+HhlDnGd6ziVfHPaCxon4L9GQfVhsb
 jbOI/kBjnEKoN1dBbEAcSpgzklVUXUj4x2NHUMCyvKOJyKG/F7Ycbghux9t3C+ej
 1T0XJAU7K3hkmstWkWwylqVZt3UW47xiJKe6K2Z5p3CaJx0cnI18C+g7x/IcRGiA
 +J/Uco+xeMa8yqYV96j+AJexpUDu7fYo6B4nRZ/K+MjWifboeSLKn8PHLKhqYn6k
 sV3s0dUf8SJK5pTu+IkAgzDzsw/uJAI8Rylmig9ea12/nIt6EH3Kero31hi3lkoN
 Y2rdi9MIqFIj2tX42047Y/q2UEFkMWGO3q8fLkXRvWPwnwStHDDFVj/kd19CWcTy
 B1kNxNQQS/Q9u0uoW4rIHW6ipEU2sqyt/tvVQnmJlVP0HuO++uIO7h3mrBDxhSJS
 zQF4qtusbMHC85BHrozmGFECN8Cex8DYSUTO/yCoBvMlMxJ7UlSt25TBN+SzmnOV
 H1LhVRcFh1488lXzuM+u
 =/eCQ
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "The majority of this is an update of the ACPICA kernel code to
  upstream revision 20171215 with a cosmetic change and a maintainers
  information update on top of it.

  The rest is mostly some minor fixes and cleanups in the ACPI drivers
  and cleanups to initialization on x86.

  Specifics:

   - Update the ACPICA kernel code to upstream revision 20171215 including:
      * Support for ACPI 6.0A changes in the NFIT table (Bob Moore)
      * Local 64-bit divide in string conversions (Bob Moore)
      * Fix for a regression in acpi_evaluate_object_type() (Bob Moore)
      * Fixes for memory leaks during package object resolution (Bob
        Moore)
      * Deployment of safe version of strncpy() (Bob Moore)
      * Debug and messaging updates (Bob Moore)
      * Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob
        Moore)
      * Null pointer dereference avoidance in Op and cleanups (Colin Ian
        King)
      * Fix for memory leak from building prefixed pathname (Erik
        Schmauss)
      * Coding style fixes, disassembler and compiler updates (Hanjun
        Guo, Erik Schmauss)
      * Additional PPTT flags from ACPI 6.2 (Jeremy Linton)
      * Fix for an off-by-one error in acpi_get_timer_duration()
        (Jung-uk Kim)
      * Infinite loop detection timeout and utilities cleanups (Lv
        Zheng)
      * Windows 10 version 1607 and 1703 OSI strings (Mario
        Limonciello)

   - Update ACPICA information in MAINTAINERS to reflect the current
     status of ACPICA maintenance and rename a local variable in one
     function to match the corresponding upstream code (Rafael Wysocki)

   - Clean up ACPI-related initialization on x86 (Andy Shevchenko)

   - Add support for Intel Merrifield to the ACPI GPIO code (Andy
     Shevchenko)

   - Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav)

   - Fix the ACPI Generic Event Device (GED) driver to free IRQs on
     shutdown and clean up the PCI IRQ Link driver (Sinan Kaya)

   - Make the GHES code call into the AER driver on all errors and clean
     up the ACPI APEI code (Colin Ian King, Tyler Baicar)

   - Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
     Kulkarni)

   - Add a lid switch blacklist to the ACPI button driver and make it
     print extra debug messages on lid events (Hans de Goede)

   - Add quirks for Asus GL502VSK and UX305LA to the ACPI battery driver
     and clean it up somewhat (Bjørn Mork, Kai-Heng Feng)

   - Add device link for CHT SD card dependency on I2C to the ACPI LPSS
     (Intel SoCs) driver and make it avoid creating platform device
     objects for devices without MMIO resources (Adrian Hunter, Hans de
     Goede)

   - Fix the ACPI GPE mask kernel command line parameter handling
     (Prarit Bhargava)

   - Fix the handling of (incorrectly exposed) backlight interfaces
     without LCD (Hans de Goede)

   - Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
     Uytterhoeven)"

* tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
  ACPI/PCI: pci_link: reduce verbosity when IRQ is enabled
  ACPI / LPSS: Do not instiate platform_dev for devs without MMIO resources
  ACPI / PMIC: Convert to use builtin_platform_driver() macro
  ACPI / x86: boot: Propagate error code in acpi_gsi_to_irq()
  ACPICA: Update version to 20171215
  ACPICA: trivial style fix, no functional change
  ACPICA: Fix a couple memory leaks during package object resolution
  ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings
  ACPICA: DT compiler: prevent error if optional field at the end of table is not present
  ACPICA: Rename a global variable, no functional change
  ACPICA: Create and deploy safe version of strncpy
  ACPICA: Cleanup the global variables and update comments
  ACPICA: Debugger: fix slight indentation issue
  ACPICA: Fix a regression in the acpi_evaluate_object_type() interface
  ACPICA: Update for a few debug output statements
  ACPICA: Debug output, no functional change
  ACPI: EC: Fix debugfs_create_*() usage
  ACPI / video: Default lcd_only to true on Win8-ready and newer machines
  ACPI / x86: boot: Don't setup SCI on HW-reduced platforms
  ACPI / x86: boot: Use INVALID_ACPI_IRQ instead of 0 for acpi_sci_override_gsi
  ...
2018-01-29 10:17:53 -08:00
Linus Torvalds
7f3fdd40a7 Power management updates for v4.16-rc1
- Define a PM driver flag allowing drivers to request that their
    devices be left in suspend after system-wide transitions to the
    working state if possible and add support for it to the PCI bus
    type and the ACPI PM domain (Rafael Wysocki).
 
  - Make the PM core carry out optimizations for devices with driver
    PM flags set in some cases and make a few drivers set those flags
    (Rafael Wysocki).
 
  - Fix and clean up wrapper routines allowing runtime PM device
    callbacks to be re-used for system-wide PM, change the generic
    power domains (genpd) framework to stop using those routines
    incorrectly and fix up a driver depending on that behavior of
    genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
 
  - Fix and clean up the PM core's device wakeup framework and
    re-factor system-wide PM core code related to device wakeup
    (Rafael Wysocki, Ulf Hansson, Brian Norris).
 
  - Make more x86-based systems use the Low Power Sleep S0 _DSM
    interface by default (to fix power button wakeup from
    suspend-to-idle on Surface Pro3) and add a kernel command line
    switch to tell it to ignore the system sleep blacklist in the
    ACPI core (Rafael Wysocki).
 
  - Fix a race condition related to cpufreq governor module removal
    and clean up the governor management code in the cpufreq core
    (Rafael Wysocki).
 
  - Drop the unused generic code related to the handling of the static
    power energy usage model in the CPU cooling thermal driver along
    with the corresponding documentation (Viresh Kumar).
 
  - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng).
 
  - Add a new operating point to the imx6ul and imx6q cpufreq drivers
    and switch the latter to using clk_bulk_get() (Anson Huang, Dong
    Aisheng).
 
  - Add support for multiple regulators to the TI cpufreq driver along
    with a new DT binding related to that and clean up that driver
    somewhat (Dave Gerlach).
 
  - Fix a powernv cpufreq driver regression leading to incorrect CPU
    frequency reporting, fix that driver to deal with non-continguous
    P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat).
 
  - Add support for frequency scaling on Armada 37xx SoCs through the
    generic DT cpufreq driver (Gregory CLEMENT).
 
  - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
 
  - Fix a transition delay setting regression in the longhaul cpufreq
    driver (Viresh Kumar).
 
  - Add Skylake X (server) support to the intel_pstate cpufreq driver
    and clean up that driver somewhat (Srinivas Pandruvada).
 
  - Clean up the cpufreq statistics collection code (Viresh Kumar).
 
  - Drop cluster terminology and dependency on physical_package_id
    from the PSCI driver and drop dependency on arm_big_little from
    the SCPI cpufreq driver (Sudeep Holla).
 
  - Add support for system-wide suspend and resume to the RAPL power
    capping driver and drop a redundant semicolon from it (Zhen Han,
    Luis de Bethencourt).
 
  - Make SPI domain validation (in the SCSI SPI transport driver) and
    system-wide suspend mutually exclusive as they rely on the same
    underlying mechanism and cannot be carried out at the same time
    (Bart Van Assche).
 
  - Fix the computation of the amount of memory to preallocate in the
    hibernation core and clean up one function in there (Rainer Fiebig,
    Kyungsik Lee).
 
  - Prepare the Operating Performance Points (OPP) framework for being
    used with power domains and clean up one function in it (Viresh
    Kumar, Wei Yongjun).
 
  - Clean up the generic sysfs interface for device PM (Andy Shevchenko).
 
  - Fix several minor issues in power management frameworks and clean
    them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
    Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
    Sergey Senozhatsky, gaurav jindal).
 
  - Make it easier to disable PM via Kconfig (Mark Brown).
 
  - Clean up the cpupower and intel_pstate_tracer utilities (Doug
    Smythies, Laura Abbott).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJaYw2iAAoJEILEb/54YlRxLHwP/iabmAcbXBeg30/wSCKcWB6f
 Ar785YbkFedNP7b2dypR7bcKIkaV55EExNHHoVuvC6gKrW+zx3F39v9QzK3HBKfw
 DgLWMjxR5Xdm9o8o2chsBEMl0itSRB9s864s+AAAElP+qjyT6kmbFyRFgVYLiNH0
 v9jNhPF9EmirViwES/syELa/P1AJDMxCb/SbRY+Xp1sPhGKlx2J/2eQsVDs7G+wL
 2BJeyBqwL9D78U/eY2bvpCoZLpmZmklx1eY5iK3Mzo6LZKYMaSypgkGuRfh//K+a
 8vFLwOBsOlpZ8lsPBRatV5+SMu8qMQMTnstui1m3/9bOPFfjymat6u0lLw4BV2hv
 zrNfqWOiwTAt/fczR1/naYuuSeRCLABvYDKjs/9iYdrCZYJ+n+ZzU/wi5geswDtD
 cQKDMOdOBrnfkN0Vqpw6ZBqun0RDldNT/+6oy93tHWBlF0CA4mMq5jr8q3iH35CW
 8TA1GCkurHZXTyYdYXR5SUHxPbOgZC87GAb7RlFEJJnvvkmy3jmBng675Hl5XAn7
 D8eJp3d4h5n121pkMLGcBc7K036T2uFsjrHWx+QsjKFUBWUBnuRfInRrLA5WnGo2
 U+KIEUPepdnbFFvYNv+kTgz2uE6FOqycEmnUKUKWUZYPN0GDAOw/V3813uxVRYtq
 27omIOL7PJp1wWjQnfXK
 =dnb7
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This includes some infrastructure changes in the PM core, mostly
  related to integration between runtime PM and system-wide suspend and
  hibernation, plus some driver changes depending on them and fixes for
  issues in that area which have become quite apparent recently.

  Also included are changes making more x86-based systems use the Low
  Power Sleep S0 _DSM interface by default, which turned out to be
  necessary to handle power button wakeups from suspend-to-idle on
  Surface Pro3.

  On the cpufreq front we have fixes and cleanups in the core, some new
  hardware support, driver updates and the removal of some unused code
  from the CPU cooling thermal driver.

  Apart from this, the Operating Performance Points (OPP) framework is
  prepared to be used with power domains in the future and there is a
  usual bunch of assorted fixes and cleanups.

  Specifics:

   - Define a PM driver flag allowing drivers to request that their
     devices be left in suspend after system-wide transitions to the
     working state if possible and add support for it to the PCI bus
     type and the ACPI PM domain (Rafael Wysocki).

   - Make the PM core carry out optimizations for devices with driver PM
     flags set in some cases and make a few drivers set those flags
     (Rafael Wysocki).

   - Fix and clean up wrapper routines allowing runtime PM device
     callbacks to be re-used for system-wide PM, change the generic
     power domains (genpd) framework to stop using those routines
     incorrectly and fix up a driver depending on that behavior of genpd
     (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).

   - Fix and clean up the PM core's device wakeup framework and
     re-factor system-wide PM core code related to device wakeup
     (Rafael Wysocki, Ulf Hansson, Brian Norris).

   - Make more x86-based systems use the Low Power Sleep S0 _DSM
     interface by default (to fix power button wakeup from
     suspend-to-idle on Surface Pro3) and add a kernel command line
     switch to tell it to ignore the system sleep blacklist in the ACPI
     core (Rafael Wysocki).

   - Fix a race condition related to cpufreq governor module removal and
     clean up the governor management code in the cpufreq core (Rafael
     Wysocki).

   - Drop the unused generic code related to the handling of the static
     power energy usage model in the CPU cooling thermal driver along
     with the corresponding documentation (Viresh Kumar).

   - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh
     Cheng).

   - Add a new operating point to the imx6ul and imx6q cpufreq drivers
     and switch the latter to using clk_bulk_get() (Anson Huang, Dong
     Aisheng).

   - Add support for multiple regulators to the TI cpufreq driver along
     with a new DT binding related to that and clean up that driver
     somewhat (Dave Gerlach).

   - Fix a powernv cpufreq driver regression leading to incorrect CPU
     frequency reporting, fix that driver to deal with non-continguous
     P-states correctly and clean it up (Gautham Shenoy, Shilpasri
     Bhat).

   - Add support for frequency scaling on Armada 37xx SoCs through the
     generic DT cpufreq driver (Gregory CLEMENT).

   - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).

   - Fix a transition delay setting regression in the longhaul cpufreq
     driver (Viresh Kumar).

   - Add Skylake X (server) support to the intel_pstate cpufreq driver
     and clean up that driver somewhat (Srinivas Pandruvada).

   - Clean up the cpufreq statistics collection code (Viresh Kumar).

   - Drop cluster terminology and dependency on physical_package_id from
     the PSCI driver and drop dependency on arm_big_little from the SCPI
     cpufreq driver (Sudeep Holla).

   - Add support for system-wide suspend and resume to the RAPL power
     capping driver and drop a redundant semicolon from it (Zhen Han,
     Luis de Bethencourt).

   - Make SPI domain validation (in the SCSI SPI transport driver) and
     system-wide suspend mutually exclusive as they rely on the same
     underlying mechanism and cannot be carried out at the same time
     (Bart Van Assche).

   - Fix the computation of the amount of memory to preallocate in the
     hibernation core and clean up one function in there (Rainer Fiebig,
     Kyungsik Lee).

   - Prepare the Operating Performance Points (OPP) framework for being
     used with power domains and clean up one function in it (Viresh
     Kumar, Wei Yongjun).

   - Clean up the generic sysfs interface for device PM (Andy
     Shevchenko).

   - Fix several minor issues in power management frameworks and clean
     them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
     Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
     Sergey Senozhatsky, gaurav jindal).

   - Make it easier to disable PM via Kconfig (Mark Brown).

   - Clean up the cpupower and intel_pstate_tracer utilities (Doug
     Smythies, Laura Abbott)"

* tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
  PCI / PM: Remove spurious semicolon
  cpufreq: scpi: remove arm_big_little dependency
  drivers: psci: remove cluster terminology and dependency on physical_package_id
  powercap: intel_rapl: Fix trailing semicolon
  dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
  PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
  PM / hibernate: Drop unused parameter of enough_swap
  PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
  PM / runtime: Rework pm_runtime_force_suspend/resume()
  PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()
  cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
  cpufreq: intel_pstate: Add Skylake servers support
  cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
  platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
  ACPI / PM: Use Low Power S0 Idle on more systems
  PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
  PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks
  PM / core: Propagate wakeup_path status flag in __device_suspend_late()
  PM / core: Re-structure code for clearing the direct_complete flag
  powercap: add suspend and resume mechanism for SOC power limit
  ...
2018-01-29 09:47:41 -08:00
Linus Torvalds
1c1f395b28 sound updates for 4.16-rc1
The major changes in the core API side in this cycle are the still
 on-going ASoC componentization works.  Other than that, only few small
 changes such as 20bit PCM format support are found.
 
 Meanwhile the rest majority of changes are for ASoC drivers:
 - Large cleanups of some of the TI CODEC drivers
 - Continued work on Intel ASoC stuff for new quirks, ACPI GPIO
   handling, Kconfigs and lots of cleanups
 - Refactoring of the Freescale SSI driver, as preliminary work for the
   upcoming changes
 - Work on ST DFSDM driver, including the required IIO patches
 - New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier
   EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and TAS6424
   devices
 - Removal of dead codes for SN95031 and board drivers
 
 Last but not least, a few HD-audio and USB-audio quirks are included
 as usual, too.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlpiBA8OHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8vYRAAzPLHP07290Tv1o6qyEzBvFsYIvFIuxAWxOzT
 RziMMTwiXtmcDh1wBqwniVucgyXXMxM1LIVj4eY4G5e2jnMAZabSW7FtlBf6bp6z
 COZsXLOStx+oTfY9h8pPf3qjlAPgtvBmX6I6AzxugmG7jKUeMzrBMCSNnrYNbbus
 rIivZYQANmISDXb7ADO1dYDiJ6KjcigHSv5iN1gJgOlcamErAQXYT6/7bwZdeKwE
 x6ycRUr8wnp/+3smqR2S8vs0UniZsbKMZVs2OUMjlV3MvEZlaBC8YD/fQHcHB8CQ
 z9WPk1JRq1rAymw5KvO8XEh2kHQUzlLAqm9D33rR9hL4tI5fyKvAFfner7TOVZeG
 S4I6yIbMUyfi+gJNhiZV/47DghQOIQq+oZodC+OUnZKaoYREb5mbG/mjFsRnT11N
 9hDmh0iEHs3mPEjOGhCVUZ70yUwJRa/pJic0NxwQqlkvKNteesiHOavPcSbsndS6
 4/dbplsC0vcvYpvU+LXi69Mewc+Hz60Af66Br6xW2K7ZMUffYoHHFP7B2POJBoFq
 0hlSrhxvq7qWb6je+4XZ0LSucfhENZ1YtDYlTe5VEssnHoxZMZOmApmcdXSdSrAE
 RN08DmQ8WsVrRtsfpWcUvMKaxz4e+sAxTFcOAR6aKExiDt7AiXpETzEUnNkQr4/V
 TxA5EZM=
 =vsOf
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "The major changes in the core API side in this cycle are the still
  on-going ASoC componentization works. Other than that, only few small
  changes such as 20bit PCM format support are found.

  Meanwhile the rest majority of changes are for ASoC drivers:

   - Large cleanups of some of the TI CODEC drivers

   - Continued work on Intel ASoC stuff for new quirks, ACPI GPIO
     handling, Kconfigs and lots of cleanups

   - Refactoring of the Freescale SSI driver, as preliminary work for
     the upcoming changes

   - Work on ST DFSDM driver, including the required IIO patches

   - New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier
     EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and
     TAS6424 devices

   - Removal of dead codes for SN95031 and board drivers

  Last but not least, a few HD-audio and USB-audio quirks are included
  as usual, too"

* tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (303 commits)
  ALSA: hda - Reduce the suspend time consumption for ALC256
  ASoC: use seq_file to dump the contents of dai_list,platform_list and codec_list
  ASoC: soc-core: add missing EXPORT_SYMBOL_GPL() for snd_soc_rtdcom_lookup
  IIO: ADC: stm32-dfsdm: remove unused variable again
  ASoC: bcm2835: fix hw_params error when device is in prepared state
  ASoC: mxs-sgtl5000: Do not print error on probe deferral
  ASoC: sgtl5000: Do not print error on probe deferral
  ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMON
  ALSA: usb-audio: Support changing input on Sound Blaster E1
  ASoC: Intel: remove second duplicated assignment to pointer 'res'
  ALSA: hda/realtek - update ALC215 depop optimize
  ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289
  ALSA: pcm: Fix trailing semicolon
  ASoC: add Component level .read/.write
  ASoC: cx20442: fix regression by adding back .read/.write
  ASoC: uda1380: fix regression by adding back .read/.write
  ASoC: tlv320dac33: fix regression by adding back .read/.write
  ALSA: hda - Use IS_REACHABLE() for dependency on input
  IIO: ADC: stm32-dfsdm: fix static check warning
  IIO: ADC: stm32-dfsdm: code optimization
  ...
2018-01-29 09:41:47 -08:00
Linus Torvalds
49f9c3552c init_task out-of-lining
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWl80tvSw1s6N8H32AQJq8A//ViRN5fExrd678Eh2Bz1ytrJYMUfYY3Hv
 QTH5TH9zFyLFyWLB1Iwe13sdLVTTM88O0qcDb54Lx9fWUqeMZyYvBhLtWPc00lTU
 0m3EyYR87MFWaEV+VxaVWgWaWkMDkd39KubDitcS+YIBDszTuMpYodhPUsgLt7lr
 pePX7eurXKdQPTh4NUOjGA2NaZot3tga76J6D8NKruGYUstQCGxpP1ryiFfACnwf
 NLWNO8ZBMtlDwX1mHYOOMFMaBzFzXorPm7jY4HJDf3mUM84xI3ach6CuH9RTSzfq
 A+qB1U3QILPVFo2HtqOHui4bFjRwqOf6uIrI/KcnioJ37w1O+KFcMJeDnX2I211q
 f2lXehJLQA7kPmxQw8T3//HDRaLXc0Qxt7IPZRFinrlkcN4oh3DD5euMfCFBSoZG
 PTbjxlgMfzJPoZtqAcy0rV5L54a/F4h915OQPJCKLwujIsXD2nT993vNmGDyq4zh
 BzNMxSXJC8p+jYvQpNhWyyxwDBBT/YsVQo/ACwg4eJnD3blVTAioRT9ZZcAcsY0F
 0z1eWW5RiknzIaXQWvjfK0gYKpO+aMSu9+gipHfMbU3yXG+sPj/H6zAHYzqX3uQZ
 jb5Iujjnu49W/YD+RiMenuu59lNXUnLSeRnlV7dw0qxGK1FzGo24+ZzKFhJhKvzG
 tdfUsev1Mc8=
 =jhWg
 -----END PGP SIGNATURE-----

Merge tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull init_task initializer cleanups from David Howells:
 "It doesn't seem useful to have the init_task in a header file rather
  than in a normal source file. We could consolidate init_task handling
  instead and expand out various macros.

  Here's a series of patches that consolidate init_task handling:

   (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and
       openrisc.

   (2) Alter the INIT_TASK_DATA linker script macro to set
       init_thread_union and init_stack rather than defining these in C.

       Insert init_task and init_thread_into into the init_stack area in
       the linker script as appropriate to the configuration, with
       different section markers so that they end up correctly ordered.

       We can then get merge ia64's init_task.c into the main one.

       We then have a bunch of single-use INIT_*() macros that seem only
       to be macros because they used to be used per-arch. We can then
       expand these in place of the user and get rid of a few lines and
       a lot of backslashes.

   (3) Expand INIT_TASK() in place.

   (4) Expand in place various small INIT_*() macros that are defined
       conditionally. Expand them and surround them by #if[n]def/#endif
       in the .c file as it takes fewer lines.

   (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place.

   (6) Expand INIT_STRUCT_PID in place.

  These macros can then be discarded"

* tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  Expand INIT_STRUCT_PID and remove
  Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove
  Expand various INIT_* macros and remove
  Expand INIT_TASK() in init/init_task.c and remove
  Construct init thread stack in the linker script rather than by union
  openrisc: Make THREAD_SIZE available to vmlinux.lds
  hexagon: Make THREAD_SIZE available to vmlinux.lds
  cris: Make THREAD_SIZE available to vmlinux.lds
2018-01-29 09:08:34 -08:00
Jeff Layton
f02a9ad1f1 fs: handle inode->i_version more efficiently
Since i_version is mostly treated as an opaque value, we can exploit that
fact to avoid incrementing it when no one is watching. With that change,
we can avoid incrementing the counter on writes, unless someone has
queried for it since it was last incremented. If the a/c/mtime don't
change, and the i_version hasn't changed, then there's no need to dirty
the inode metadata on a write.

Convert the i_version counter to an atomic64_t, and use the lowest order
bit to hold a flag that will tell whether anyone has queried the value
since it was last incremented.

When we go to maybe increment it, we fetch the value and check the flag
bit.  If it's clear then we don't need to do anything if the update
isn't being forced.

If we do need to update, then we increment the counter by 2, and clear
the flag bit, and then use a CAS op to swap it into place. If that
works, we return true. If it doesn't then do it again with the value
that we fetch from the CAS operation.

On the query side, if the flag is already set, then we just shift the
value down by 1 bit and return it. Otherwise, we set the flag in our
on-stack value and again use cmpxchg to swap it into place if it hasn't
changed. If it has, then we use the value from the cmpxchg as the new
"old" value and try again.

This method allows us to avoid incrementing the counter on writes (and
dirtying the metadata) under typical workloads. We only need to increment
if it has been queried since it was last changed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-01-29 06:42:21 -05:00
Jeff Layton
7594c46116 fs: don't take the i_lock in inode_inc_iversion
The rationale for taking the i_lock when incrementing this value is
lost in antiquity. The readers of the field don't take it (at least
not universally), so my assumption is that it was only done here to
serialize incrementors.

If that is indeed the case, then we can drop the i_lock from this
codepath and treat it as a atomic64_t for the purposes of
incrementing it. This allows us to use inode_inc_iversion without
any danger of lock inversion.

Note that the read side is not fetched atomically with this change.
The assumption here is that that is not a critical issue since the
i_version is not fully synchronized with anything else anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-29 06:42:20 -05:00
Jeff Layton
ae5e165d85 fs: new API for handling inode->i_version
Add a documentation blob that explains what the i_version field is, how
it is expected to work, and how it is currently implemented by various
filesystems.

We already have inode_inc_iversion. Add several other functions for
manipulating and accessing the i_version counter. For now, the
implementation is trivial and basically works the way that all of the
open-coded i_version accesses work today.

Future patches will convert existing users of i_version to use the new
API, and then convert the backend implementation to do things more
efficiently.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-29 06:41:30 -05:00
Boris Brezillon
571cb17b23 Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
 * Introduce the ->exec_op() infrastructure
 * Rework NAND buffers handling
 * Fix ECC requirements for K9F4G08U0D
 * Fix nand_do_read_oob() to return the number of bitflips
 * Mark K9F1G08U0E as not supporting subpage writes
 
 Driver changes:
 * MTK: Rework the driver to support new IP versions
 * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
   DT support
 * Marvell: Add a new driver to replace the pxa3xx one
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJaaawrIxxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcAApQP/3rP5nXYF5l9mMX8lDSrUDiU7EMIHOyOvIAxmNkf
 1NVIAnFumHyH08JJ1YbVDbqRDnNSgAlkSKVtbeQ/jREM25Klg8RJj95Fpy0I+2Zh
 iM8e/vDNb/jw5fcoSrQuYBOGjh6vo8XjDFjAlvw9fo13xn+J5on9bpQCwr4Qq6Zf
 RMKTjwWUSk1lGT8M7Wzb3McoBkMQhkrdzWx1mZ+o+BKSYvDc3BjzJZ/+dHgfa5Jr
 91RrHnZcx+UnOaEqRPgQ0eZK1Ww3MzHG3TIN7U1KVrV63CrJ3UmB38ZcsLQzjl2g
 2P0ntsyYV8Eu3Wv8ZX4HovcBmZyzLWlr935uQE6EQxiCX9eOJyE/ImTmC4JhBGoF
 XElIqj+mDkZHDYI/5D+Hm02+t4NgSyqIddZ5nD68LxjFmIZSjKRXKE3ovYPoi2U8
 TY4LO+zXDDGA5FcSV4DcSrKN0M0I2lL9P9/ve+rvibNM9W8p/8piWPPJUUdV1sPQ
 RHN0m0X73Ce/C4U6PE/dTA6qb3RI6UaxWrl7Qdf9Kobm60PZQme8gLP7C0ert09T
 4DnfOaOHMtqh8G+p03oQQ/CXgdi+WdnJINgkq5Auu7vyFgAJMZRmHlzowsIJ5+QA
 +cengrfRzMCfsLnFN4LraHo1Kp5zXkPYEIPTx6Mq0B1GvqdLZV49tsqM8HSeIy1r
 vXN2
 =TXIU
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next

Pull NAND changes from Boris Brezillon:

"
  Core changes:
  * Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
  * Introduce the ->exec_op() infrastructure
  * Rework NAND buffers handling
  * Fix ECC requirements for K9F4G08U0D
  * Fix nand_do_read_oob() to return the number of bitflips
  * Mark K9F1G08U0E as not supporting subpage writes

  Driver changes:
  * MTK: Rework the driver to support new IP versions
  * OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
    DT support
  * Marvell: Add a new driver to replace the pxa3xx one
"
2018-01-29 09:58:36 +01:00
Boris Brezillon
c8f22b02a8 This pull-request contains the following notable changes:
Core changes:
 * Add support to new ISSI and Cypress/Spansion memory parts.
 * Fix support of Micron memories by checking error bits in the FSR.
 * Fix update of block-protection bits by reading back the SR.
 * Restore the internal state of the SPI flash memory when removing the
   device.
 
 Driver changes:
 * Maintenance for Freescale, Intel and Metiatek drivers.
 * Add support of the direct access mode for the Cadence QSPI controller.
 -----BEGIN PGP SIGNATURE-----
 
 iQI4BAABCAAiBQJaW3m5GxxjeXJpbGxlLnBpdGNoZW5Ad2VkZXY0dS5mcgAKCRDn
 4OgLHRpJchNfEACxur2dlSc1WVpFSczwejXEMy9Pp/MOz+tEBuNGqZlKyjmACLXD
 C/Cn1nuWxL0DbkG09va4PM3M3pf+LysMACSIwBa0fxRKLb8uvIkTMMmCEV6Dr+Ie
 XiydtBg1vriklgGPS+ytFt5SibER8U7dj2p4+OO2feql6HxLGs/OJ3Ta3k18794K
 VDhzFvudpUTGWet3MeoTky9jMpkjxHqY/e4PFB7Q2u41a+yrsRuQkXtYkIUS3Jki
 nFagQMmhU6XvTpjDt3tpGlJ54lFEBkh2575AAPjnf4ZzII5Sdq+uwDi56DweB+qM
 1S/Ajung1YV0l1nlN48YP5n2e362tOk41F+rlRv08kutbj3bi9V6jQZ19XA260u6
 jVRhiMg5gW11MQtxvCCoePgJ8GHUAYrMPnmlTExw27Z3Ig57L+We92txG3P56+Pj
 ZgKbbL/W2qFoFD9Z4UkFGY8aXWc4Bw8gNEMBB6mICqHHtuljxVTDomRO1rUtgny5
 4k/eIBcoHhhZq9jrXTtGit4l3tXxbr26ejirQv1/ZIwYM8r+7DNJBotVa4v+AS3W
 sR+SyrOVA9//taRJl3G48gSo5i3GqUyDRMUqd5tW2Lzw14muLTcmckAz8Gn/TByN
 Wnez11AT0UkNUm4yrYWOPDlEq7mHjbnSyXUHX7XO7A9ft6Euo0LZp6WozA==
 =3oDP
 -----END PGP SIGNATURE-----

Merge tag 'spi-nor/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next

Pull spi-nor changes from Cyrille Pitchen:

"
  This pull-request contains the following notable changes:

  Core changes:
  * Add support to new ISSI and Cypress/Spansion memory parts.
  * Fix support of Micron memories by checking error bits in the FSR.
  * Fix update of block-protection bits by reading back the SR.
  * Restore the internal state of the SPI flash memory when removing the
    device.

  Driver changes:
  * Maintenance for Freescale, Intel and Metiatek drivers.
  * Add support of the direct access mode for the Cadence QSPI controller.
"
2018-01-29 09:55:14 +01:00
Linus Torvalds
624441927f Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
 "A single bug fix to prevent a subtle deadlock in the scheduler core
  code vs cpu hotplug"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix cpu.max vs. cpuhotplug deadlock
2018-01-28 11:51:45 -08:00
Mark Brown
977b06d0a4
Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/s3c64xx', 'spi/topic/sh-msiof', 'spi/topic/sirf' and 'spi/topic/sun6i' into spi-next 2018-01-26 17:57:31 +00:00
Mark Brown
73d8003749
Merge remote-tracking branch 'regulator/topic/core' into regulator-next 2018-01-26 17:56:59 +00:00
Chunyan Zhang
f7efad10b5
regulator: add PM suspend and resume hooks
In this patch, consumers are allowed to set suspend voltage, and this
actually just set the "uV" in constraint::regulator_state, when the
regulator_suspend_late() was called by PM core through callback when
the system is entering into suspend, the regulator device would act
suspend activity then.

And it assumes that if any consumer set suspend voltage, the regulator
device should be enabled in the suspend state.  And if the suspend
voltage of a regulator device for all consumers was set zero, the
regulator device would be off in the suspend state.

This patch also provides a new function hook to regulator devices for
resuming from suspend states.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26 14:43:55 +00:00
Chunyan Zhang
aa27bbc6c6
regulator: empty the old suspend functions
Regualtor suspend/resume functions should only be called by PM suspend
core via registering dev_pm_ops, and regulator devices should implement
the callback functions.  Thus, any regulator consumer shouldn't call
the regulator suspend/resume functions directly.

In order to avoid compile errors, two empty functions with the same name
still be left for the time being.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26 14:43:51 +00:00
Chunyan Zhang
72069f9957
regulator: leave one item to record whether regulator is enabled
The items "disabled" and "enabled" are a little redundant, since only one
of them would be set to record if the regulator device should keep on
or be switched to off in suspend states.

So in this patch, the "disabled" was removed, only leave the "enabled":
  - enabled == 1 for regulator-on-in-suspend
  - enabled == 0 for regulator-off-in-suspend
  - enabled == -1 means do nothing when entering suspend mode.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26 14:43:46 +00:00
Nicolas Dichtel
f15ca723c1 net: don't call update_pmtu unconditionally
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at           (null)"

Let's add a helper to check if update_pmtu is available before calling it.

Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 16:27:34 -05:00
Dan Streetman
4ee806d511 net: tcp: close sock if net namespace is exiting
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.

For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open.  However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open.  In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence.  The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:

unregister_netdevice: waiting for lo to become free. Usage count = 1

These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.

After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 10:56:45 -05:00
Linus Torvalds
5b7d27967d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Avoid negative netdev refcount in error flow of xfrm state add, from
    Aviad Yehezkel.

 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
    ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
    From Yossi Kuperman.

 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
    failing to allocate an appropriate amount of headroom. From
    Guillaume Nault.

 4) Fix memory leak in vmxnet3 driver, from Neil Horman.

 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
    from Wolfgang Bumiller.

 6) Restrict what kinds of sockets can be bound to the KCM multiplexer
    and also disallow when another layer has attached to the socket and
    made use of sk_user_data. From Tom Herbert.

 7) Fix use before init of IOTLB in vhost code, from Jason Wang.

 8) Correct STACR register write bit definition in IBM emac driver, from
    Ivan Mikhaylov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/ibm/emac: wrong bit is used for STA control register write
  net/ibm/emac: add 8192 rx/tx fifo size
  vhost: do not try to access device IOTLB when not initialized
  vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
  i40e: flower: check if TC offload is enabled on a netdev
  qed: Free reserved MR tid
  qed: Remove reserveration of dpi for kernel
  kcm: Check if sk_user_data already set in kcm_attach
  kcm: Only allow TCP sockets to be attached to a KCM mux
  net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
  net: sched: em_nbyte: don't add the data offset twice
  mlxsw: spectrum_router: Don't log an error on missing neighbor
  vmxnet3: repair memory leak
  ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
  pppoe: take ->needed_headroom of lower device into account on xmit
  xfrm: fix boolean assignment in xfrm_get_type_offload
  xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
  xfrm: fix error flow in case of add state fails
  xfrm: Add SA to hardware at the end of xfrm_state_construct()
2018-01-24 17:24:30 -08:00
Wolfgang Bumiller
d3303a65a0 net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
TCF_LAYER_LINK and TCF_LAYER_NETWORK returned the same pointer as
skb->data points to the network header.
Use skb_mac_header instead.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24 14:52:48 -05:00
Linus Torvalds
03fae44b41 With the new ORC unwinder, ftrace stack tracing became disfunctional.
One was that ORC didn't know how to handle the ftrace callbacks in general
 (which Josh fixed). The other was that ORC would just bail if it hit a
 dynamically allocated trampoline. Which means all ftrace stack tracing that
 happens from the function tracer would produce no results (that includes
 killing the max stack size tracer).  I added a check to the ORC unwinder to
 see if the trampoline belonged to ftrace, and if it did, use the orc entry
 of the static trampoline that was used to create the dynamic one (it would
 be identical).
 
 Finally, I noticed that the skip values of the stack tracing were out of
 whack. I went through and fixed them up.
 -----BEGIN PGP SIGNATURE-----
 
 iQHIBAABCgAyFiEEPm6V/WuN2kyArTUe1a05Y9njSUkFAlpohNcUHHJvc3RlZHRA
 Z29vZG1pcy5vcmcACgkQ1a05Y9njSUnJ4wv/evoOzbuF67P1N1ci9qjtAuUzOGMA
 jr/x/kHj/jE+w5diXTw0XOlaWzK6tB8BEfaVVcljjjjUdoXzULXCv5zR59ARioio
 VhnTt1VPr+4fc5huTcIXYf8NXTNoqzLVBIR7+iO9Qk1v5nwFcJjQThj42enCXQR4
 sHdeOGpW4N8UKZ1yw+i95a/JibLbnwiQRQRtMXOqxvJiplJsytWlqZkVsOyMFwA9
 X+X6FbBAJYwSktMvcEXvvq7BGTuCEJF2R6+P0M40yjBLkJKxa4knM39/zt8DiZFl
 bTu9JGfo1uEuMR3I+l7pxNOcPY/8rYbkWS7GAjXxMZk8Zb7iHxaQeQyJSeJbUhaV
 ZS+dWVv6zkDvE1Lf0jdeyfjN8HzEZUTYRaFvDZ6JhuykxcJzCLef23uW8laheghO
 w58JpwzzVliPe3Iw9E4z8isEeXCU9FYGoxu8NvkP13O72j7D5ZnwwhGAAbgtmYpL
 Ez92F0JIh3bNdpEJ7XgJG9ZF9uIhRoGI+D9l
 =JDuB
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "With the new ORC unwinder, ftrace stack tracing became disfunctional.

  One was that ORC didn't know how to handle the ftrace callbacks in
  general (which Josh fixed).

  The other was that ORC would just bail if it hit a dynamically
  allocated trampoline. Which means all ftrace stack tracing that
  happens from the function tracer would produce no results (that
  includes killing the max stack size tracer). I added a check to the
  ORC unwinder to see if the trampoline belonged to ftrace, and if it
  did, use the orc entry of the static trampoline that was used to
  create the dynamic one (it would be identical).

  Finally, I noticed that the skip values of the stack tracing were out
  of whack. I went through and fixed them up"

* tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Update stack trace skipping for ORC unwinder
  ftrace, orc, x86: Handle ftrace dynamically allocated trampolines
  x86/ftrace: Fix ORC unwinding from ftrace handlers
2018-01-24 10:08:16 -08:00
Greg Kroah-Hartman
5132ede0fe Revert "module: Add retpoline tag to VERMAGIC"
This reverts commit 6cfb521ac0.

Turns out distros do not want to make retpoline as part of their "ABI",
so this patch should not have been merged.  Sorry Andi, this was my
fault, I suggested it when your original patch was the "correct" way of
doing this instead.

Reported-by: Jiri Kosina <jikos@kernel.org>
Fixes: 6cfb521ac0 ("module: Add retpoline tag to VERMAGIC")
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: rusty@rustcorp.com.au
Cc: arjan.van.de.ven@intel.com
Cc: jeyu@kernel.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-24 09:00:05 -08:00
Peter Zijlstra
ce48c14649 sched/core: Fix cpu.max vs. cpuhotplug deadlock
Tejun reported the following cpu-hotplug lock (percpu-rwsem) read recursion:

  tg_set_cfs_bandwidth()
    get_online_cpus()
      cpus_read_lock()

    cfs_bandwidth_usage_inc()
      static_key_slow_inc()
        cpus_read_lock()

Reported-by: Tejun Heo <tj@kernel.org>
Tested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180122215328.GP3397@worktop
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-24 10:03:44 +01:00
Ben Hutchings
e9191ffb65 ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
Commit 513674b5a2 ("net: reevalulate autoflowlabel setting after
sysctl setting") removed the initialisation of
ipv6_pinfo::autoflowlabel and added a second flag to indicate
whether this field or the net namespace default should be used.

The getsockopt() handling for this case was not updated, so it
currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is
not explicitly enabled.  Fix it to return the effective value, whether
that has been set at the socket or net namespace level.

Fixes: 513674b5a2 ("net: reevalulate autoflowlabel setting after sysctl ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 19:53:24 -05:00
Steven Rostedt (VMware)
6be7fa3c74 ftrace, orc, x86: Handle ftrace dynamically allocated trampolines
The function tracer can create a dynamically allocated trampoline that is
called by the function mcount or fentry hook that is used to call the
function callback that is registered. The problem is that the orc undwinder
will bail if it encounters one of these trampolines. This breaks the stack
trace of function callbacks, which include the stack tracer and setting the
stack trace for individual functions.

Since these dynamic trampolines are basically copies of the static ftrace
trampolines defined in ftrace_*.S, we do not need to create new orc entries
for the dynamic trampolines. Finding the return address on the stack will be
identical as the functions that were copied to create the dynamic
trampolines. When encountering a ftrace dynamic trampoline, we can just use
the orc entry of the ftrace static function that was copied for that
trampoline.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-23 15:56:55 -05:00
Kirill A. Shutemov
0d665e7b10 mm, page_vma_mapped: Drop faulty pointer arithmetics in check_pte()
Tetsuo reported random crashes under memory pressure on 32-bit x86
system and tracked down to change that introduced
page_vma_mapped_walk().

The root cause of the issue is the faulty pointer math in check_pte().
As ->pte may point to an arbitrary page we have to check that they are
belong to the section before doing math. Otherwise it may lead to weird
results.

It wasn't noticed until now as mem_map[] is virtually contiguous on
flatmem or vmemmap sparsemem. Pointer arithmetic just works against all
'struct page' pointers. But with classic sparsemem, it doesn't because
each section memap is allocated separately and so consecutive pfns
crossing two sections might have struct pages at completely unrelated
addresses.

Let's restructure code a bit and replace pointer arithmetic with
operations on pfns.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Fixes: ace71a19ce ("mm: introduce page_vma_mapped_walk()")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-21 17:44:47 -08:00
Linus Torvalds
24b6124047 KVM fixes for v4.15-rc9
ARM:
 * fix incorrect huge page mappings on systems using the contiguous hint
   for hugetlbfs
 * support alternative GICv4 init sequence
 * correctly implement the ARM SMCC for HVC and SMC handling
 
 PPC:
 * add KVM IOCTL for reporting vulnerability and workaround status
 
 s390:
 * provide userspace interface for branch prediction changes in firmware
 
 x86:
 * use correct macros for bits
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJaY3/eAAoJEED/6hsPKofo64kH/16SCSA9pKJTf39+jLoCPzbp
 tlhzxoaqb9cPNMQBAk8Cj5xNJ6V4Clwnk8iRWaE6dRI5nWQxnxRHiWxnrobHwUbK
 I0zSy+SywynSBnollKzLzQrDUBZ72fv3oLwiYEYhjMvs0zW6Q/vg10WERbav912Q
 bv8nb5e8TbvU500ErndKTXOa8/B6uZYkMVjBNvAHwb+4AQ7bJgDQs5/qOeXllm8A
 MT/SNYop/fkjRP7mQng5XYzoO+70tbe0hWpOQGgBnduzrbkNNvZtYtovusHYytLX
 PAB7DDPbLZm5L2HBo4zvKgTHIoHTxU0X2yfUDzt7O151O2WSyqBRC3y1tpj6xa8=
 =GnNJ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - fix incorrect huge page mappings on systems using the contiguous
     hint for hugetlbfs
   - support alternative GICv4 init sequence
   - correctly implement the ARM SMCC for HVC and SMC handling

  PPC:
   - add KVM IOCTL for reporting vulnerability and workaround status

  s390:
   - provide userspace interface for branch prediction changes in
     firmware

  x86:
   - use correct macros for bits"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: wire up bpb feature
  KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
  KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
  arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
  KVM: arm64: Fix GICv4 init when called from vgic_its_create
  KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
2018-01-20 11:41:09 -08:00
Christian Borntraeger
35b3fde620 KVM: s390: wire up bpb feature
The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-01-20 17:30:47 +01:00
Miquel Raynal
c1a72e2dbb mtd: nand: Fix build issues due to an anonymous union
GCC-4.4.4 raises errors when assigning a parameter in an anonymous
union, leading to this kind of failure:

drivers/mtd/nand/marvell_nand.c:1936:
    warning: missing braces around initializer
    warning: (near initialization for '(anonymous)[1].<anonymous>')
    error: unknown field 'data' specified in initializer
    error: unknown field 'addr' specified in initializer

Work around the situation by naming these unions.

Fixes: 8878b126df ("mtd: nand: add ->exec_op() implementation")
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Tested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-20 10:39:02 +01:00
Bart Van Assche
f5ced52aaa block: Remove kblockd_schedule_delayed_work{,_on}()
The previous patch removed all users of these two functions. Hence
also remove the functions themselves.

Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-19 12:52:03 -07:00
Bart Van Assche
8c7a8d1c4b lib/scatterlist: Fix chaining support in sgl_alloc_order()
This patch avoids that workloads with large block sizes (megabytes)
can trigger the following call stack with the ib_srpt driver (that
driver is the only driver that chains scatterlists allocated by
sgl_alloc_order()):

BUG: Bad page state in process kworker/0:1H  pfn:2423a78
page:fffffb03d08e9e00 count:-3 mapcount:0 mapping:          (null) index:0x0
flags: 0x57ffffc0000000()
raw: 0057ffffc0000000 0000000000000000 0000000000000000 fffffffdffffffff
raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
page dumped because: nonzero _count
CPU: 0 PID: 733 Comm: kworker/0:1H Tainted: G          I      4.15.0-rc7.bart+ #1
Hardware name: HP ProLiant DL380 G7, BIOS P67 08/16/2015
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
 dump_stack+0x5c/0x83
 bad_page+0xf5/0x10f
 get_page_from_freelist+0xa46/0x11b0
 __alloc_pages_nodemask+0x103/0x290
 sgl_alloc_order+0x101/0x180
 target_alloc_sgl+0x2c/0x40 [target_core_mod]
 srpt_alloc_rw_ctxs+0x173/0x2d0 [ib_srpt]
 srpt_handle_new_iu+0x61e/0x7f0 [ib_srpt]
 __ib_process_cq+0x55/0xa0 [ib_core]
 ib_cq_poll_work+0x1b/0x60 [ib_core]
 process_one_work+0x141/0x340
 worker_thread+0x47/0x3e0
 kthread+0xf5/0x130
 ret_from_fork+0x1f/0x30

Fixes: e80a0af475 ("lib/scatterlist: Introduce sgl_alloc() and sgl_free()")
Reported-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-19 12:31:03 -07:00
Jens Axboe
9b9c63f71b Merge branch 'nvme-4.16' of git://git.infradead.org/nvme into for-4.16/block
Pull NVMe fixes for 4.16 from Christoph.

* 'nvme-4.16' of git://git.infradead.org/nvme:
  nvme-pci: clean up SMBSZ bit definitions
  nvme-pci: clean up CMB initialization
  nvme-fc: correct hang in nvme_ns_remove()
  nvme-fc: fix rogue admin cmds stalling teardown
  nvmet: release a ns reference in nvmet_req_uninit if needed
  nvme-fabrics: fix memory leak when parsing host ID option
  nvme: fix comment typos in nvme_create_io_queues
  nvme: host delete_work and reset_work on separate workqueues
  nvme-pci: allocate device queues storage space at probe
  nvme-pci: serialize pci resets
2018-01-19 12:28:13 -07:00
Matthew Wilcox
a3d6c976f7 sparse doesn't support struct randomization
Without this patch, I drown in a sea of unknown attribute warnings

Link: http://lkml.kernel.org/r/20180117024539.27354-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-19 10:09:41 -08:00
Takashi Iwai
c86d95cb6b ASoC: Updates for v4.16
Some final updates for the merge window, this brings in some
 improvements to the ACPI GPIO handling for Intel and a bunch of fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlph4RMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MzZB/9wMMti91eAeyTnnZvhf+7USCrhbYha
 NQr0gktACvGY5y+qhVOdPGASzWBjUObWu0Ne+W32/WRWjJ9Gh54yomH5uAHCP8kl
 qFugDwxagy1hKqMMn1reKhSbxPFbS1uOEDAZZPC1hWAWk9ZgXpKL9uI+kAZIBZ2z
 48CVHBb6XUwD7Pcb5jOcUEhr5CLyCwoeAsiXDztDI5BCzvbrENe3lQoX5snoswij
 /0qX7SrJmgiH/mMiLZQs4PU9v4nwzwrXpwYXwUWJGZPVPNGTtpnhc5xk0UgmMytW
 D7pzf5GIkra+khon5BbxvAo0aNaRLpw+lTCnBIRhP3Aa/Tfe9mnOZhbF
 =bULv
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.16-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v4.16

Some final updates for the merge window, this brings in some
improvements to the ACPI GPIO handling for Intel and a bunch of fixes.
2018-01-19 13:57:33 +01:00
Paul Mackerras
3214d01f13 KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace
information about the underlying machine's level of vulnerability
to the recently announced vulnerabilities CVE-2017-5715,
CVE-2017-5753 and CVE-2017-5754, and whether the machine provides
instructions to assist software to work around the vulnerabilities.

The ioctl returns two u64 words describing characteristics of the
CPU and required software behaviour respectively, plus two mask
words which indicate which bits have been filled in by the kernel,
for extensibility.  The bit definitions are the same as for the
new H_GET_CPU_CHARACTERISTICS hypercall.

There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which
indicates whether the new ioctl is available.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19 15:17:01 +11:00
Bart Van Assche
83d016ac86 block: Unexport elv_register_queue() and elv_unregister_queue()
These two functions are only called from inside the block layer so
unexport them.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-18 12:54:41 -07:00
Mark Brown
27d62d4a2d
Merge remote-tracking branches 'asoc/topic/stm32', 'asoc/topic/sun4i-i2s', 'asoc/topic/sunxi', 'asoc/topic/symmetry' and 'asoc/topic/tas5720' into asoc-next 2018-01-18 11:56:17 +00:00
Mark Brown
bb4f1a6c66
Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rt5514', 'asoc/topic/rt5645' and 'asoc/topic/samsung' into asoc-next 2018-01-18 11:56:11 +00:00
Mark Brown
2e015bfb54
Merge remote-tracking branches 'asoc/topic/hisilicon', 'asoc/topic/iio', 'asoc/topic/max98373' and 'asoc/topic/max98926' into asoc-next 2018-01-18 11:55:59 +00:00
Mark Brown
0e987921bb
Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-ssi', 'asoc/topic/fsl_asrc' and 'asoc/topic/hdac_hdmi' into asoc-next 2018-01-18 11:55:56 +00:00
Mark Brown
6ec2c85f67
Merge remote-tracking branches 'asoc/topic/cs47l24', 'asoc/topic/cx20442', 'asoc/topic/da7213', 'asoc/topic/da7218' and 'asoc/topic/dai-drv' into asoc-next 2018-01-18 11:55:50 +00:00
Mark Brown
078b3a0205
Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next 2018-01-18 11:55:37 +00:00
Mark Brown
b68cbc1d1d
Merge remote-tracking branch 'asoc/topic/intel' into asoc-next 2018-01-18 11:55:32 +00:00