[syzbot reported]
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713
...
[Analyze]
In dtInsertEntry(), when the pointer h has the same value as p, after writing
name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the
previously true judgment "p->header.flag & BT-LEAF" to change to no after writing
the name operation, this leads to entering an incorrect branch and accessing the
uninitialized object ih when judging this condition for the second time.
[Fix]
After got the page, check freelist first, if freelist == 0 then exit dtInsert()
and return -EINVAL.
Reported-by: syzbot+bba84aef3a26fb93deb9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
As per the RZ/G2L HW manual, VBUSEN can be controlled by the VBOUT
bit of the VBUS Control Register. This register is mapped in the reset
framework. The reset driver expose this register as regmap and instantiates
this driver. The consumer will use the regulator API to control the VBOUT
bit as the control need to be done in the atomic context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-5-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function that allow regulator consumers to allow low-level
HW access, in order to enable/disable regulator in atomic context.
The use-case for RZ/G2L SoC is to enable VBUS selection register based
on vbus detection that happens in interrupt context.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20240616105402.45211-4-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the fod
member of 'struct nvmet_fc_tgt_queue' triggers this restriction,
resulting in:
drivers/nvme/target/fc.c:151:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct nvmet_fc_fcp_iod' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
151 | struct nvmet_fc_fcp_iod fod[] __counted_by(sqsize);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2027
Fixes: ccd3129aca ("nvmet-fc: Annotate struct nvmet_fc_tgt_queue with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There will be three devices for this sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output. then capture device and playback device can be configured
with different master/slave mode.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As audmix requires playback and capture stream in different
master/slave mode, so separate playback and capture stream to
different DAI. There are three DAIs required, two DAIs for playback
one DAI for capture.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.
+-------+ +-----------+
| SAI1 | --TX--> | |
| | <--RX-- | |
+-------+ | |
| AUDIOMIX |
+-------+ | |
| SAI2 | --TX--> | |
+-------+ +-----------+
The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately. but only
defined fsl_sai_set_dai_fmt_tx() and fsl_sai_set_dai_fmt_rx()
ops function for current case, in the future, the other ops
function for TX and RX can be defined if required.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718174452-17596-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card2 still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msnqzoj8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Audio Graph
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o786zojd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card still not yet support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plsmzojk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Sound Card might need special trigger ordering which is based on
CPU/Codec connection. It is already supported on ASoC, but Simple Audio
Card / Audio Graph Card still not support it. Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r0d2zojq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sound Card need to consider/adjust HW control ordering based on the
combination of CPU/Codec. The controlling feature is already supported
on ASoC, but Simple Audio Card / Audio Graph Card still not support it.
Let's support it.
Cc: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sexizojx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch prepares for the introduction of a new iopolicy by breaking up
the nvme_find_path() code path into sub-routines.
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add support for Texas Instruments LP5569 LED driver.
Texas Instruments LP5569 is 9 channels chip with programmable engines.
It almost a copy of LP5523 with fundamental changes to regs order and
regs content.
Has difference in how the clock is handled and doesn't support detecting
clock time automatically, different handling for selftest and different
scheme for the status regs.
LED chip supports ENGINE and MUX to group LED and run precompiled code
with magic values to run patterns. This is loaded via the sysfs entry
and it's passed as a string of ASCII HEX char.
One some devices using this LED Controller (a NBG7815 Router) it was
found loading big precompiled pattern with up to 96 bytes of code. To
have support for this "extended" scenario, hardcode each engine to
support 4 pages of precompiled pattern (128 bytes of code) and 1 page
for each MUX. This gives plenty of space for any kind precompiled
pattern keeping simple logic for page handling of each engine and mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-21-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Some LED chip supports up to 16 pages and with some magic they can be
divided in 4 page for each ENGINE + 1 for each MUX. Following this we
can support bigger programs up to 128 bytes.
Rework the update_program_memory function to support program of multiple
pages instead of hardcoding it to one page per programs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-19-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize sysfs master_fader since their implementation is the same across
some lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-18-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize sysfs engine_leds since their implementation is the same across
some lp55xx based LED driver.
While at it simplify the implementation for show_engine_leds.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-17-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize sysfs engine_load and engine_mode since their implementation
is the same acrosso some lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-16-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize stop_engine function as the implementation is the same for
most of the lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-15-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize turn_off_channels function as the implementation is the same for
most of the lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-14-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize set_led_current function as the implementation is the same for
most of the lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-13-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize multicolor_brightness function as the implementation is the
same for most of the lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-12-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize led_brightness function as the implementation is the same for
most of the lp55xx based LED driver.
Introduce a new option in device_config, reg_led_pwm_base since the reg
value is not the same for every LED chip.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-11-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize firmware_loaded function as lp55xx based LED driver all share
the same logic.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-10-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
LED Driver based on lp55xx all use the same logic to write memory in
SMEM. The only difference is that legacy chip doesn't support pages and
have the engine regs one after another.
To handle this apply the same logic used for load_engine also for
update_program_memory.
Introduce a new config in device_config, base_prog. For LED chip
that doesn't support pages, offset this values of 32 for each engine.
Update all lp55xx based LED driver to use this new function and define
all the required bits.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-9-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize run_engine function for lp55xx based LED driver. The logic is
similar to every LED driver, rework it with more macro magic and account
for LED model that might have OP MODE and EXEC at base offset in the
reg.
Update any lp55xx based LED driver to use this generalized function and
declare required bits.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-8-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Generalize load_engine_and_select_page by reworking the implementation
and making it part of the generic load_engine function.
Add a new option in device_config, pages_per_engine used to define pages
assigned to each engine. With this option set, it's assumed LED chip
supports pages and load_engine will correctly setup the write page.
An equal amount of pages is assigned to each engine and they are
assigned from page 0.
Update any lp55xx based LED driver to define the option and use the new
function.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-7-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
LED driver based on lp55xx have all a very similar implementation for
load_engine function. Move the function to lp55xx-common and rework the
define to be more dynamic instead of having to declare a temp array for
them.
Engine mask are the same for every LED based on lp55xx.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-6-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Now that stop_all_engine is generalized, probe and remove function are
the same across every lp55xx based LED driver and can be generalized.
To permit to use a common probe, make use of the OF match_data and i2c
driver_data value to store the device_config struct specific for the
LED.
Also drop the now unused exported symbol in lp55xx-common and make them
static.
Update any lp55xx based LED driver to use the new generic probe/remove.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-5-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
In all the lp55xx based driver, we have a similar implementation of the
stop_all_engine function with the only difference of the required sleep
for the OP MODE change.
The main difference is legacy LEDs require a min of 152 us while new one
use a generic 1-2ms. The new one use a 1-2ms sleep as suggested in the
datasheet IN ALTERNATIVE to a much more robust approach by using the
newly introduced ENGINE_BUSY bit in the STATUS reg.
To better handle sleep after OP MODE change, add support for polling the
ENGINE_BUSY bit and use the legacy sleep for old LEDs.
With this change, stop_all_engine can be generalized and moved to
lp55xx-common.
To make more clear the double usage of lp55xx_reg, define a union for
additional scope of mask and shift.
Update all lp55xx based driver to use the new generalized function and
define the required bits in the device_config struct.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-4-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add new ti,lp5569 compatible, this is similar to national,lp5523 with
slight change to reg order and reg type and advanced way for LED fault.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240626160027.19703-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
pwr-sel property is specific to ti,lp8501, make it conditional of the
related compatible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626160027.19703-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The SY7802 is a current-regulated charge pump which can regulate two
current levels for Flash and Torch modes.
It is a high-current synchronous boost converter with 2-channel high
side current sources. Each channel is able to deliver 900mA current.
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20240624-sy7802-v5-2-7abc9d96bfa6@apitzsch.eu
Signed-off-by: Lee Jones <lee@kernel.org>
Default blinking period is set to 2s. This is too long to be handled by
the hardware (maximum is 1.69s).
Set the default blinking period to 1s to match what is done in the
other LED drivers.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240617143910.154546-5-bastien.curutchet@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
When a LED is used to drive a beeper, it uses PWM1. This can cause
conflicts if an other LED want to use PWM1 for blinking.
Disable use of hardware for blinking when one or more LEDs are used to
drive beepers.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240617143910.154546-4-bastien.curutchet@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
PSC0/PWM0 are used by all LEDs for brightness and blinking. This causes
conflicts when you set a brightness of a new LED while an other one is
already using PWM0 for blinking.
Use PSC1/PWM1 for blinking.
Check that no other LED is already blinking with a different PSC1/PWM1
configuration to avoid conflict.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240617143910.154546-3-bastien.curutchet@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Two tables are used to configure the PWM and PSC registers of the two
PWM available in the pca9532. Magic numbers are used to access this table
instead of defines.
Add defines PCA9532_PWM_ID_0 and PCA9532_PWM_ID_1 and use them in place of
these magic numbers.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240617143910.154546-2-bastien.curutchet@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use __free for device_node values, and thus drop calls to
of_node_put.
The variable attribute __free adds a scope based cleanup to
the device node. The goal is to reduce memory management issues
in the kernel code.
The of_node_put calls were removed, and the
for_each_available_child_of_node was replaced to the equivalent
for_each_available_child_of_node_scoped which use the __free.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Link: https://lore.kernel.org/r/20240601031713.1307859-1-marilene.agarcia@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Pavel's repo hasn't been used actively for quite some time.
Let's make it official.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
The fwnode_for_each_child_node() loop requires manual intervention to
decrement the child refcount in case of an early return.
Add the missing calls to fwnode_handle_put(child) to avoid memory leaks
in the error paths.
Cc: stable@vger.kernel.org
Fixes: 679f865206 ("leds: Add mt6360 driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20240611-leds-mt6360-memleak-v1-1-93642eb5011e@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
