The SM2 algorithm has a single user in the kernel. However, it's
never been integrated properly with that user: asymmetric_keys.
The crux of the issue is that the way it computes its digest with
sm3 does not fit into the architecture of asymmetric_keys. As no
solution has been proposed, remove this algorithm.
It can be resubmitted when it is integrated properly into the
asymmetric_keys subsystem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use sizeof(*priv) instead of sizeof(struct stm32_rng_private), the
former makes renaming of struct stm32_rng_private easier if necessary,
as it removes one site where such rename has to happen. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Place device pointer in struct stm32_rng_private and use it all over the
place to get rid of the horrible type casts throughout the driver.
No functional change.
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
include/linux/pm_runtime.h pm_runtime_get_sync() description suggests to
... consider using pm_runtime_resume_and_get() instead of it, especially
if its return value is checked by the caller, as this is likely to result
in cleaner code.
This is indeed better, switch to pm_runtime_resume_and_get() which
correctly suspends the device again in case of failure. Also add error
checking into the RNG driver in case pm_runtime_resume_and_get() does
fail, which is currently not done, and it does detect sporadic -EACCES
error return after resume, which would otherwise lead to a hang due to
register access on un-resumed hardware. Now the read simply errors out
and the system does not hang.
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On x86, make allmodconfig && make W=1 C=1 warns:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/crypto/crc32-pclmul.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/crypto/curve25519-x86_64.o
Add the missing MODULE_DESCRIPTION() macro invocations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to convert the r and s
components of the signature to digits directly from the input byte
array. This avoids going through an intermediate byte array that has the
first few bytes filled with zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to create the hash
digits directly from the input byte array. This avoids going through an
intermediate byte array (rawhash) that has the first few bytes filled with
zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the allmodconfig 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libchacha.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libarc4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libdes.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libpoly1305.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the security attributes data is now populated from an HSTI
command on some processors, so show the message after it has been
populated.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align the whitespace so that future messages will also be better
aligned.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To prepare for other code that will manipulate security attributes
move the handling code out of sp-pci.c. No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Making the capabilities register a union makes it easier to refer
to the members instead of always doing bit shifts.
No intended functional changes.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The finalize operation in interrupt mode produce a produces a spinlock
recursion warning. The reason is the fact that BH must be disabled
during this process.
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This flag is needed to make the driver visible from openssl and cryptodev.
Signed-off-by: Maxime Méré <maxime.mere@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase STM32 CRYP priority, to be greater than the ARM-NEON
accelerated version.
Signed-of-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DMA when buffer are aligned and with expected size.
If buffer are correctly aligned and bigger than 1KB we have some
performance gain:
With DMA enable:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-256-cbc 120.02k 406.78k 1588.82k 5873.32k 26020.52k 34258.94k
Without DMA:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-256-cbc 121.06k 419.95k 1112.23k 1897.47k 2362.03k 2386.60k
With DMA:
extract of
$ modprobe tcrypt mode=500
testing speed of async cbc(aes) (stm32-cbc-aes) encryption
tcrypt: test 14 (256 bit key, 16 byte blocks): 1 operation in 1679 cycles (16 bytes)
tcrypt: test 15 (256 bit key, 64 byte blocks): 1 operation in 1893 cycles (64 bytes)
tcrypt: test 16 (256 bit key, 128 byte blocks): 1 operation in 1760 cycles (128 bytes)
tcrypt: test 17 (256 bit key, 256 byte blocks): 1 operation in 2154 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in 2132 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in 2466 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in 4040 cycles (4096 bytes)
Without DMA:
$ modprobe tcrypt mode=500
tcrypt: test 14 (256 bit key, 16 byte blocks): 1 operation in 1671 cycles (16 bytes)
tcrypt: test 15 (256 bit key, 64 byte blocks): 1 operation in 2263 cycles (64 bytes)
tcrypt: test 16 (256 bit key, 128 byte blocks): 1 operation in 2881 cycles (128 bytes)
tcrypt: test 17 (256 bit key, 256 byte blocks): 1 operation in 4270 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in 11537 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in 15025 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in 40747 cycles (4096 bytes)
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Public key blob is not just x and y concatenated. It follows RFC5480
section 2.2. Address this by re-documenting the function with the
correct description of the format.
Link: https://datatracker.ietf.org/doc/html/rfc5480
Fixes: 4e6602916b ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_rng_mod_init() is
a module_init() function that should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 96d63c0297 ("[PATCH] Add AMD HW RNG driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto_shash_setkey(), crypto_ahash_setkey(),
crypto_skcipher_setkey(), and crypto_aead_setkey() apparently need to
work in no-SIMD context on some architectures, make the self-tests cover
this scenario. Specifically, sometimes do the setkey while under
crypto_disable_simd_for_test(), and do this independently from disabling
SIMD for the other parts of the crypto operation since there is no
guarantee that all parts happen in the same context. (I.e., drivers
mustn't store the key in different formats for SIMD vs. no-SIMD.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The VBT spec does a very poor job of defining how the chromaticity
coordinates in block 46 are laid out. After double checking the
Windows implementation it turns out these more or less match the
EDID definition, where the 10bit values are split into 2bit + 8bit
chunks. Adjust our struct definition to reflect that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605134756.17099-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
After switching from pages to folio [1], it became evident that
the initialization of .dirty_folio for page cache operations was missed for
compressed files.
[1] https://lore.kernel.org/ntfs3/20240422193203.3534108-1-willy@infradead.org
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
An additional condition causes the mft record to be read from disk
and get the file type dt_type.
Fixes: 22457c047e ("fs/ntfs3: Modified fix directory element type detection")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Attempting to retrieve an attribute data block in a compressed frame
is ignored.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Сorrected calculation of required space len (in clusters)
for attribute data storage in case of compression.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
To check the length of the volume label, the existing constant
NTFS_LABEL_MAX_LENGTH could be used.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Replaced the two loops reading $AttrDef and $UpCase with
the inode_read_data() function.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
COMPRESSION_UNIT and NTFS_LZNT_CUNIT mean the same thing
(1u<<NTFS_LZNT_CUNIT) determines the size for compression (in clusters).
COMPRESS_MAX_CLUSTER is not used in the code.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When link status change, the nic driver need to notify the roce
driver to handle this event, but at this time, the roce driver
may uninit, then cause kernel crash.
To fix the problem, when link status change, need to check
whether the roce registered, and when uninit, need to wait link
update finish.
Fixes: 45e92b7e4e ("net: hns3: add calling roce callback function when link status change")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify license to include dual licensing as GPL-2.0-only OR MIT
license for TI specific phy header files. This allows for Linux
kernel files to be used in other Operating System ecosystems
such as Zephyr or FreeBSD.
While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync
with latest SPDX conventions (GPL-2.0 is deprecated).
While at this, update the TI copyright year to sync with current year
to indicate license change.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Wadim Egorov <w.egorov@phytec.de>
Cc: Kip Broadhurst <kbroadhurst@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Acked-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_graph_get_next_endpoint() releases the reference to the previous
endpoint on each iteration, but when parsing fails the loop exits
early meaning the last reference is never dropped.
Fix it by dropping the refcount in the exit condition.
Fixes: d375b356e6 ("coresight: Fix support for sparsely populated ports")
Signed-off-by: James Clark <james.clark@arm.com>
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240529133626.90080-1-james.clark@arm.com
During early initialization, in the xe_guc_min_load_for_hwconfig()
function, we are successfully enabling CTB communication, but it
will only allow us to send non-blocking H2G messages, as due to
not yet enabled IRQs, including G2H IRQs, we will not notice any
new G2H message sent by the GuC, including replies to our blocking
H2G request messages. And those successful replies are mandatory
for the VF drivers to continue normal operations.
As attempt to workaround this driver initialization ordering issue,
introduce special safe-mode CTB worker, that will periodically
trigger G2H processing, like original IRQ handler, in case no
MSI/MSIX IRQs were enabled on the driver yet. Once we detect that
IRQ were enabled, we will stop this worker.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606130639.1504-3-michal.wajdeczko@intel.com
In the next patch we will want to perform the same steps that
g2h worker function is doing but from the different worker.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606130639.1504-2-michal.wajdeczko@intel.com
The "resp.sensor_name" comes from cros_ec_cmd() and it hasn't necessarily
been NUL terminated. We had not intended to read past "sensor_name_size"
bytes, however, there is a width vs precision bug in the format string.
The format needs to be precision '%.*s' instead of width '%*s'.
Precision prevents an out of bounds read, but width is a no-op.
Fixes: bc3e452580 ("hwmon: add ChromeOS EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/42331b70-bd3c-496c-8c79-3ec4faad40b8@moroto.mountain
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).
The reset line is also wired so that it can be left deasserted when the
supply is off.
This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).
Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.
Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org> # 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This fixes the following:
interrupt-controller@4080: compatible: 'oneOf' conditional failed, one must be fixed:
['amlogic,meson-gpio-intc', 'amlogic,c3-gpio-intc'] is too long
'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,c3-gpio-intc', 'amlogic,t7-gpio-intc']
'amlogic,meson-gpio-intc' was expected
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-9-62e812729541@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
