For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.
The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.
Fixes: c5c37af6ec ("tcp: Convert do_tcp_sendpages() to use MSG_SPLICE_PAGES")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240530232607.82686-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
errcmd_enable_error_reporting() uses pci_{read,write}_config_word()
that return PCIBIOS_* codes. The return code is then returned all the
way into the probe function igen6_probe() that returns it as is. The
probe functions, however, should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from errcmd_enable_error_reporting().
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com
gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned all the way into the module
init function amd64_edac_init() that returns it as is. The module init
functions, however, should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from gpu_get_node_map().
For consistency, convert also the other similar cases which return
PCIBIOS_* codes even if they do not have any bugs at the moment.
Fixes: 4251566ebc ("EDAC/amd64: Cache and use GPU node map")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527132236.13875-1-ilpo.jarvinen@linux.intel.com
Davide Caratti says:
====================
net: allow dissecting/matching tunnel control flags
Ilya says: "for correct matching on decapsulated packets, we should match
on not only tunnel id and headers, but also on tunnel configuration flags
like TUNNEL_NO_CSUM and TUNNEL_DONT_FRAGMENT. This is done to distinguish
similar tunnels with slightly different configs. And it is important since
tunnel configuration is flow based, i.e. can be different for every packet,
even though the main tunnel port is the same."
- patch 1 extends the kernel's flow dissector to extract these flags
from the packet's tunnel metadata.
- patch 2 extends TC flower to match on any combination of TUNNEL_NO_CSUM,
TUNNEL_DONT_FRAGMENT, TUNNEL_OAM, TUNNEL_CRIT_OPT
v4:
- fix kernel-doc warning in flow_dissector.h (thanks Jakub)
v3:
- rebase on top of new uAPI bits and internals after commit 5832c4a77d
("ip_tunnel: convert __be16 tunnel flags to bitmaps"). Use of network
byte order is no more needed, since these bits match on metadata: convert
netlink attributes to be u32.
- also include TUNNEL_CRIT_OPT
v2:
- use NL_REQ_ATTR_CHECK() where possible (thanks Jamal)
- don't overwrite 'ret' in the error path of fl_set_key_flags()
====================
Link: https://lore.kernel.org/r/cover.1717088241.git.dcaratti@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
extend cls_flower to match TUNNEL_FLAGS_PRESENT bits in tunnel metadata.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dissect [no]csum, [no]dontfrag, [no]oam, [no]crit flags from skb metadata.
This is a prerequisite for matching these control flags using TC flower.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These functions are defined in the hid-nintendo.c file, but not
called elsewhere, so delete these unused functions.
drivers/hid/hid-nintendo.c:672:20: warning: unused function 'joycon_device_is_procon'.
drivers/hid/hid-nintendo.c:682:20: warning: unused function 'joycon_device_is_snescon'.
drivers/hid/hid-nintendo.c:687:20: warning: unused function 'joycon_device_is_gencon'.
drivers/hid/hid-nintendo.c:692:20: warning: unused function 'joycon_device_is_n64con'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9265
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Catching and debugging missing qdiscs is pretty tricky. When qdisc
is deleted we replace it with a noop qdisc, which silently drops
all the packets. Since the noop qdisc has a single static instance
we can't count drops at the qdisc level. Count them as dev->tx_drops.
ip netns add red
ip link add type veth peer netns red
ip link set dev veth0 up
ip -netns red link set dev veth0 up
ip a a dev veth0 10.0.0.1/24
ip -netns red a a dev veth0 10.0.0.2/24
ping -c 2 10.0.0.2
# 2 packets transmitted, 2 received, 0% packet loss, time 1031ms
ip -s link show dev veth0
# TX: bytes packets errors dropped carrier collsns
# 1314 17 0 0 0 0
tc qdisc replace dev veth0 root handle 1234: mq
tc qdisc replace dev veth0 parent 1234:1 pfifo
tc qdisc del dev veth0 parent 1234:1
ping -c 2 10.0.0.2
# 2 packets transmitted, 0 received, 100% packet loss, time 1034ms
ip -s link show dev veth0
# TX: bytes packets errors dropped carrier collsns
# 1314 17 0 3 0 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240529162527.3688979-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the C3 peripherals clock controller driver in the C3 SoC family.
[jbrunet: fix Kconfig select order and probe function name]
Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240522082727.3029656-6-xianwei.zhao@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Fix the 'make W=1' kernel-doc warning:
drivers/hid/intel-ish-hid/ishtp/bus.c:853: warning: Function parameter or struct member 'dev' not described in 'ishtp_wait_resume'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060843.dXENYlGc-lkp@intel.com/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Show more info for interrupt only lines in debugfs. It's useful
to monitor the lines that have been never requested as GPIOs,
but IRQs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240530191418.1138003-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently, HUION devices use ABS_WHEEL as the usage for touch strips.
There are 2 main issues with this approach:
The first one is that the descriptor for touch rings
(uclogic_rdesc_v2_frame_touch_ring_arr) also uses ABS_WHEEL.
>From user-space it is impossible to know which device sends the events.
The second one is that Wacom uses ABS_RX/ABS_RY to notify events from
touch strips and user-space was designed to handle those axes.
Change the usage of touch strips to Rx/Ry to fix both issues.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/989
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The HID descriptor for HUION tablets was limited to 13 buttons. However,
there are devices with more buttons in their frames.
So far, the device with more buttons released by HUION is the Huion
Kamvas Pro 24 (GT-240, QHD) [1], with 20 buttons.
Tweak the HID descriptor to support it.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/989 [1]
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The function hid_register_field() might allocate more than 32k, which
would use order-4 contiguous memory if the parameter usage exceeds
1024. However, after the system runs for a while, the memory can
become heavily fragmented. This increases the likelihood of order-4 page
allocation failure. Here’s the relevant log.
[71553.093623]kworker/1: 0: page allocation failure: order:4, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0
[71553.093669]Workqueue: events uhid_device_add_worker
[71553.093683]Call trace:
[71553.093687]: dump_backtrace+0xf4/0x118
[71553.093696]: show_stack+0x18/0x24
[71553.093702]: dump_stack_lvl+0x60/0x7c
[71553.093710]: dump_stack+0x18/0x3c
[71553.093717]: warn_alloc+0xf4/0x174
[71553.093725]: __alloc_pages_slowpath+0x1ba0/0x1cac
[71553.093732]: __alloc_pages+0x460/0x560
[71553.093738]: __kmalloc_large_node+0xbc/0x1f8
[71553.093746]: __kmalloc+0x144/0x254
[71553.093752]: hid_add_field+0x13c/0x308
[71553.093758]: hid_parser_main+0x250/0x298
[71553.093765]: hid_open_report+0x214/0x30c
[71553.093771]: mt_probe+0x130/0x258
[71553.093778]: hid_device_probe+0x11c/0x1e4
[71553.093784]: really_probe+0xe4/0x388
[71553.093791]: __driver_probe_device+0xa0/0x12c
[71553.093798]: driver_probe_device+0x44/0x214
[71553.093804]: __device_attach_driver+0xdc/0x124
[71553.093812]: bus_for_each_drv+0x88/0xec
[71553.093818]: __device_attach+0x84/0x170
[71553.093824]: device_initial_probe+0x14/0x20
[71553.093831]: bus_probe_device+0x48/0xd0
[71553.093836]: device_add+0x248/0x928
[71553.093844]: hid_add_device+0xf8/0x1a4
[71553.093850]: uhid_device_add_worker+0x24/0x144
[71553.093857]: process_one_work+0x158/0x804
[71553.093865]: worker_thread+0x15c/0x494
[71553.093872]: kthread+0xf4/0x1e4
[71553.093880]: ret_from_fork+0x10/0x20
To fix the allocation failure, use kvzalloc() instead of kzalloc().
Signed-off-by: Hailong.Liu <hailong.liu@oppo.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
[1]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
Modules linked in:
CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline]
RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863
...
Call Trace:
<TASK>
__usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline]
usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636
hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Fixes: 95d1c8951e ("HID: simplify implement() a bit")
Reported-by: <syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Looks like drivers/crypto/vmx/.gitignore should have been merged into
arch/powerpc/crypto/.gitignore as part of commit
109303336a ("crypto: vmx - Move to arch/powerpc/crypto") so that all
generated asm files are ignored.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 109303336a ("crypto: vmx - Move to arch/powerpc/crypto")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-powerpc-crypto-ignore-p8-asm-v1-1-05843fec2bb7@linux.ibm.com
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/auxdisplay/hd44780_common.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/auxdisplay/line-display.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Like we do for charlcd, allow the configuration of the initial message
on line-display devices.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's not an error or noteworthy condition if the
"ibm,dynamic-reconfiguration-memory" node isn't present.
Drop the needless message.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-silence-drmem_init-v1-1-e9d71646bc3d@linux.ibm.com
VAS allocate, modify and deallocate HCALLs returns
H_LONG_BUSY_ORDER_1_MSEC or H_LONG_BUSY_ORDER_10_MSEC for busy
delay and expects OS to reissue HCALL after that delay. But using
msleep() will often sleep at least 20 msecs even though the
hypervisor suggests OS reissue these HCALLs after 1 or 10msecs.
The open and close VAS window functions hold mutex and then issue
these HCALLs. So these operations can take longer than the
necessary when multiple threads issue open or close window APIs
simultaneously, especially might affect the performance in the
case of repeat open/close APIs for each compression request.
Multiple tasks can open / close VAS windows at the same time
which depends on the available VAS credits. For example, 240
cores system provides 4800 VAS credits. It means 4800 tasks can
execute open VAS windows HCALLs with the mutex. Since each
msleep() will often sleep more than 20 msecs, some tasks are
waiting more than 120 secs to acquire mutex. It can cause hung
traces for these tasks in dmesg due to mutex contention around
open/close HCALLs.
Instead of msleep(), use usleep_range() to ensure sleep with
the expected value before issuing HCALL again. So since each
task sleep 10 msecs maximum, this patch allow more tasks can
issue open/close VAS calls without any hung traces in the
dmesg.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Suggested-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240116055910.421605-1-haren@linux.ibm.com
In the current design, a numa-node is made online only if that node is
attached to cpu/memory. With this design, if any PCI/IO device is found
to be attached to a numa-node which is not online then the numa-node
id of the corresponding PCI/IO device is set to NUMA_NO_NODE(-1). This
design may negatively impact the performance of PCIe device if the
numa-node assigned to PCIe device is -1 because in such case we may not
be able to accurately calculate the distance between two nodes.
The multi-controller NVMe PCIe disk has an issue with calculating the
node distance if the PCIe NVMe controller is attached to a PCI host
bridge which has numa-node id value set to NUMA_NO_NODE. This patch
helps fix this ensuring that a cpu/memory less numa node is made online
if it's attached to PCI host bridge.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240517142531.3273464-3-nilay@linux.ibm.com
Dynamic DMA Window (DDW) supports TCEs that are backed by 2MB page
size. In most configurations, DDW is big enough to pre-map all of LPAR
memory for IO. Pre-mapping of memory for DMA results in improvements in
IO performance.
Persistent memory, vPMEM, can be assigned to an LPAR as well. vPMEM is
not contiguous with LPAR memory and usually is assigned at high memory
addresses. This makes is not possible to pre-map both vPMEM and LPAR
memory in the same DDW.
For a dedicated adapter this limitation is not an issue. Dedicated
adapters can have both Default DMA window, which is backed by 4K page
size and a DDW backed by 2MB page size TCEs. In this scenario, LPAR
memory is pre-mapped in the DDW. Any DMA going to the vPMEM is routed
via dynamically allocated TCEs in the default window.
The issue arises with SR-IOV adapters. There is only one DMA window -
either Default or DDW. If an LPAR has vPMEM assigned, memory is not
pre-mapped in the DDW since TCEs needs to be allocated for vPMEM as well.
In this case, DDW is created and TCEs are dynamically allocated for both
vPMEM and LPAR memory.
Today, DDW is only used in single mode - direct mapped TCEs or
dynamically mapped TCEs. This enhancement breaks a single DDW in 2
regions -
1. First region to pre-map LPAR memory
2. Second region to dynamically allocate TCEs for IO to vPMEM
The DDW is split only if it is big enough to pre-map complete LPAR
memory and still have some space left to dynamically map vPMEM. Maximum
size possible DDW is created as permitted by the Hypervisor.
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240514014608.35537-1-gbatra@linux.ibm.com
On an Amiga 1200 equipped with a Warp1260 accelerator, an interrupt
storm coming from the accelerator board causes the machine to crash in
local_irq_enable() or auto_irq_enable(). Disabling interrupts for the
Warp1260 in amiga_parse_bootinfo() fixes the problem.
Link: https://lore.kernel.org/r/ZkjwzVwYeQtyAPrL@amaterasu.local
Cc: stable <stable@kernel.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240601153254.186225-1-p.pisati@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Drop privacy-LED GPIO control, after the privacy-LED GPIO control was added
to the ov5693 driver it was decided to model privacy-LEDs as LED class
devices and have them be controlled by the v4l2-core.
So this is dead code since on devices with privacy LEDs the led is not
a GPIO on the ov5693 fwnode, but rather is a LED class devices controlled
by the v4l2-core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stopping the CSI source before stopping the serializer
CSI port may make the serializer not respond.
Then all the next writes to the device will fail.
max96717 1-0040: Error writing reg 0x0308: -121
max96717 1-0040: Error writing reg 0x0006: -121
Fix that by stopping the CSI receiver first and then CSI source.
Seen on max96717f revision 4.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96714 deserializer in tunnel mode.
The CSI output will replicate all the CSI traffic forwarded by
the remote serializer.
The MAX96714 driver can handle MAX96714 and MAX96714F variants
with the same "maxim,max96714f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver handles the MAX96717 serializer in tunnel mode.
All incoming CSI traffic will be tunneled through the GMSL2
link.
The MAX96717 driver can handle MAX96717 and MAX96717F variants
with the same "maxim,max96717f" compatible.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
[Sakari Ailus: Adapt to changed i2c_mux_add_adapter arguments.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Several subdev state pointers are used to access the state read-only.
Mark them as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It would be useful to mark instances of v4l2_subdev_state structures as
const when code needs to access them read-only. This isn't currently
possible, as the v4l2_subdev_state_get_*() accessor functions take a
non-const pointer to the state.
Use _Generic() to provide two different versions of the accessors, for
const and non-const states respectively. The former returns a const
pointer to the requested format, rectangle or interval, implementing
const-correctness. The latter returns a non-const pointer, preserving
the current behaviour for drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Drop the word "below" from the text.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documentation of the v4l2_subdev_state_get_format() macro
incorrectly references __v4l2_subdev_state_get_format() instead of
__v4l2_subdev_state_gen_call(). Fix it, and also update the list of
similar macros to add the missing v4l2_subdev_state_get_interval().
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Always assign *val to 0 in cci_read(). This has the benefit of not
requiring initialisation of the variables data is read to using
cci_read(). Once smatch is fixed, it could catch the use of uninitialised
reads.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It's entirely normal CSR will return non-indicative values after its reset
(0). There's no need to warn the user about that.
Suggested-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'i2c_reg_value' is unused since the original
commit 5a544cce21 ("[media] adv7511: add new video encoder").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'regval_list' has been unused since
commit 398994c1e1 ("V4L/DVB (13666): tw9910: modify V/H outpit pin
setting to use VALID").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'adjust' has been unused since original
commit fbe60daac4 ("V4L/DVB (3916): AverMedia 6 Eyes AVS6EYES
support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'regval_list' is unused since the original
commit 859891228e ("media: i2c: dw9768: Add DW9768 VCM driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a v4l2 subdevice driver for the Sony IMX283 image sensor.
The IMX283 is a 20MP Diagonal 15.86 mm (Type 1) CMOS Image Sensor with
Square Pixel for Color Cameras.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank/link freq control support
- Test pattern support control
- Arbitrary horizontal and vertical cropping
- Supported resolution:
- 5472x3648 @ 20fps (SRGGB12)
- 5472x3648 @ 25fps (SRGGB10)
- 2736x1824 @ 50fps (SRGGB12)
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
[Sakari Ailus: Take upstream runtime PM API changes into account.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
