- Implement command interface to query ABM SW algorithm and
HW caps. This is primarily intended as a debugging interface
- Add new definitions for max number of histogram bins and ABM
curve segments available in hardware
- Add structures to retrieve caps to describe ABM HW caps
since not all ASICs have the same number of cure segments and
bins
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Switching between DSC clock or disable DSC block are not double buffered update.
Corruption is observed if these updates happen before DSC double buffered
disconnection.
[how]
Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered
disconnection and all mpccs are disconnected before reset DSC clock.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3351c608f3 ("drm/amd/display: Only program P-State force if pipe config changed")
Which causes regression.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c536555451 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Make enable and disable sequences symmetric.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires hubp to be in its own component.
[how]
move all files under newly created hubp folder and fixing the makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhuvana Chandra Pinninti <bhuvanachandra.pinninti@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Split into a separate adjust and calculate call so
we can let the caller adjust recout
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a bug introduced by commit c536555451 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When referencing other schema, it is preferred to use an absolute path
(/schemas/....), which allows also an seamless move of particular schema
out of Linux kernel to dtschema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240505084618.135705-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Allow stm to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-22-ville.syrjala@linux.intel.com
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Allow rcar-du to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-21-ville.syrjala@linux.intel.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Allow atmel-hlcdc to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-17-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
phys_to_page() is not available on most architectures.
Just open code it like msm does. Allows COMPILE_TEST=y
builds of omapdrm on other architectures.
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-15-ville.syrjala@linux.intel.com
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Allow kirin to be built with COMPILE_TEST=y for greater
coverage. Builds fine on x86/x86_64 at least.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-12-ville.syrjala@linux.intel.com
Acked-by: John Stultz <jstultz@google.com>
BIT(32) is illegal when sizeof(long)==4. Use BIT_ULL(32)
instead.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-11-ville.syrjala@linux.intel.com
Acked-by: John Stultz <jstultz@google.com>
Use the appropriate 64bit division helpers to make the code
build on 32bit architectures.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-10-ville.syrjala@linux.intel.com
Acked-by: John Stultz <jstultz@google.com>
Include linux/io.h for readl()/writel().
When built on x86_64 w/ COMPILE_TEST=y:
../drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h:93:16: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration]
93 | orig = readl(addr);
| ^~~~~
../drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h:96:9: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration]
96 | writel(tmp, addr);
| ^~~~~~
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-9-ville.syrjala@linux.intel.com
Acked-by: John Stultz <jstultz@google.com>
Fix another shift-by-64 by factoring out a common helper for
bch2_bkey_format_invalid() and bformat_needs_redo() (where it was
already fixed).
Reported-by: syzbot+9833a1d29d4a44361e2c@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Input mode for the DIG FIFO should be programmed as part of stream
encoder setup.
[HOW]
Pre-calculate the pixels per cycle as part of the pixel clock params,
and program as part of stream encoder setup.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Providing a mechanism to manipulate the pwm frequency on the
individual GPUs and monitor the transition during the switch.
[How]
Added a variable in dc_debug_options data structure. Using
this variable to call the newly added command on the firmware.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sreeja Golui <sreeja.golui@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
User can get the panel replay capability and state for debug.
sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_capability
"Sink support: no" - if panel doesn't support Replay
"Sink support: yes" - if panel supports Replay
"Driver support: no\n" - if driver doesn't support Replay
"Driver support: yes\n" - if driver supports Replay
sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_state
It will return current panel replay state
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Current 420 ODM combine will override debug settings.
Add support if debug settings is set for 420 ODM combine.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Btree nodes are log structured; thus, we need to emit whiteouts when
we're deleting a key that's been written out to disk.
k->needs_whiteout tracks whether a key will need a whiteout when it's
deleted, and this requires some careful handling; e.g. the key we're
deleting may not have been written out to disk, but it may have
overwritten a key that was - thus we need to carry this flag around on
overwrites.
Invariants:
There may be multiple key for the same position in a given node (because
of overwrites), but only one of them will be a live (non deleted) key,
and only one key for a given position will have the needs_whiteout flag
set.
Additionally, we don't want to carry around whiteouts that need to be
written in the main searchable part of a btree node - btree_iter_peek()
will have to skip past them, and this can lead to an O(n^2) issues when
doing sequential deletions (e.g. inode rm/truncate). So there's a
separate region in the btree node buffer for unwritten whiteouts; these
are merge sorted with the rest of the keys we're writing in the btree
node write path.
The unwritten whiteouts was a later optimization that bch2_sort_keys()
didn't take into account; the unwritten whiteouts area means that we
never have deleted keys with needs_whiteout set in the main searchable
part of a btree node.
That means we can simplify and optimize some sort paths, and eliminate
an assertion that syzbot found:
- Unless we're in the btree node write path, it's always ok to drop
whiteouts when sorting
- When sorting for a btree node write, we drop the whiteout if it's not
from the unwritten whiteouts area, or if it's overwritten by a real
key at the same position.
This completely eliminates some tricky logic for propagating the
needs_whiteout flag: syzbot was able to hit the assertion that checked
that there shouldn't be more than one key at the same pos with
needs_whiteout set, likely due to a combination of flipping on
needs_whiteout on all written keys (they need whiteouts if overwritten),
combined with not always dropping unneeded whiteouts, and the tricky
logic in the sort path for preserving needs_whiteout that wasn't really
needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Starting with HW version 7, there are actually two separate buses
(with two separate sets of wires). So add support for the second bus.
The first platform that needs this support for the second bus is the
Qualcomm X1 Elite, so add the compatible for it as well.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240417-spmi-multi-master-support-v10-7-5bc6d322e266@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-13-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than setting up the core, obsrv and chnls in probe by using
version specific conditionals, add a dedicated "get_core_resources"
version specific op and move the acquiring in there. Since there are
no current users of the second bus yet, drop the comment about why
devm_platform_ioremap_resource can't be used in case of "core",
as it is not applicable anymore.
Don't switch to devm_platform_ioremap_resource though as we need
to keep track of core size.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240417-spmi-multi-master-support-v10-5-5bc6d322e266@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-11-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following compile warnings:
warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240417-spmi-multi-master-support-v10-3-5bc6d322e266@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-9-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dedicated schema for X1E80100 PMIC ARB. This is not the first
platform to introduce multiple buses. In fact, all platforms that
implement the version 7 for the SPMI PMIC arbiter have multiple buses.
Since the compatible should not be version based, the platform specific
one is used. The X1E80100 platform is the first platform to really need
the second master, as all the available boards have the PMICs that
provide the eUSB2 repeater on the second bus.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240417-spmi-multi-master-support-v10-1-5bc6d322e266@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-7-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devm_ioremap() function does not return error pointers.
It returns NULL on error.
This issue was detected once more also by using the Coccinelle software.
Update three checks (and corresponding error codes) for failed
function calls accordingly.
Fixes: ffdfbafdc4 ("spmi: Use devm_spmi_controller_alloc()")
Fixes: 231601cd22 ("spmi: pmic-arb: Add support for PMIC v7")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/82a0768e-95b0-4091-bdd1-14c3e893726b@web.de
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-6-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'nr' member of struct spmi_controller, which serves as an identifier
for the controller/bus. This value is a dynamic ID assigned in
spmi_controller_alloc, and overriding it from the driver results in an
ida_free error "ida_free called for id=xx which is not allocated".
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Fixes: 70f59c90c8 ("staging: spmi: add Hikey 970 SPMI controller driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240228185116.1269-1-vamshigajjela@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-5-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the binding example by dropping the unnecessary parent bus
node, using a define for the second register value of the PMIC child and
increasing indentation to four spaces.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231130173757.13011-3-johan+linaro@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-4-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up the free text binding references which were not updated when
moving the bindings out of staging and which had a leading current
directory component, respectively.
Fixes: 9bd9e0de1c ("mfd: hi6421-spmi-pmic: move driver from staging")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231130173757.13011-2-johan+linaro@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the spmi_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-spmi-v1-1-ef7f278f1987@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds.
Fixes: c8d2f34ea9 ("speakup: Avoid crash on very long word")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/d16f67d2-fd0a-4d45-adac-75ddd11001aa@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detailed description for this pull request:
- Covert to platform remove callback with .remove_new ops
: extcon-adc-jack.c/extcon-intel-cht-wc.c/extcon-intel-mrfld.c
: extcon-max3355.c/extcon-max77843.c/extcon-usb-gpio.c/extcon-usbc-cros-ec.c
- Switch to use dev_err_prove() on extcon-intel-mrfld.c
- Remove unused of_gpio.h on extcon-rtk-type-c.c
- Select IRQ_DOMAIN config instead of dependency for extcon-max8997.c
- Use returned error instead of -ENOMEM for extcon-intel-mrfld.c
-----BEGIN PGP SIGNATURE-----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=jnzy
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.10
Detailed description for this pull request:
- Covert to platform remove callback with .remove_new ops
: extcon-adc-jack.c/extcon-intel-cht-wc.c/extcon-intel-mrfld.c
: extcon-max3355.c/extcon-max77843.c/extcon-usb-gpio.c/extcon-usbc-cros-ec.c
- Switch to use dev_err_prove() on extcon-intel-mrfld.c
- Remove unused of_gpio.h on extcon-rtk-type-c.c
- Select IRQ_DOMAIN config instead of dependency for extcon-max8997.c
- Use returned error instead of -ENOMEM for extcon-intel-mrfld.c
* tag 'extcon-next-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
extcon: intel-cht-wc: Convert to platform remove callback returning void
extcon: adc-jack: Convert to platform remove callback returning void
extcon: intel-mrfld: Don't shadow error from devm_extcon_dev_allocate()
extcon: max8997: select IRQ_DOMAIN instead of depending on it
extcon: intel-mrfld: Switch to use dev_err_probe()
Secondary Bus Reset (SBR) is equivalent to a device being hot removed and
inserted again. Doing a SBR on a CXL type 3 device is problematic if the
exported device memory is part of system memory that cannot be offlined.
The event is equivalent to violently ripping out that range of memory from
the kernel. While the hardware requires the "Unmask SBR" bit set in the
Port Control Extensions register and the kernel currently does not unmask
it, user can unmask this bit via setpci or similar tool.
The driver does not have a way to detect whether a reset coming from the
PCI subsystem is a Function Level Reset (FLR) or SBR. The only way to
detect is to note if a decoder is marked as enabled in software but the
decoder control register indicates it's not committed.
Add a helper function to find discrepancy between the decoder software
state versus the hardware register state.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
By default Secondary Bus Reset (SBR) is masked for CXL Ports (see CXL r3.1,
sec 8.1.5.2).
Add cxl_reset_bus_function() (method "cxl_bus") to set the "Unmask SBR" bit
in the upstream CXL Port before performing the bus reset and restore the
original value afterwards.
This method allows the user to perform a bus reset on a CXL device without
needing to set the "Unmask SBR" bit via a user tool.
Link: https://lore.kernel.org/r/20240502165851.1948523-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log, invert condition to avoid negation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Per CXL spec r3.1, sec 8.1.5.2, the Secondary Bus Reset (SBR) bit in the
Bridge Control register of a CXL port has no effect unless the "Unmask SBR"
bit is set.
Return -ENOTTY if we attempt a bus reset on a device below a CXL Port where
"Unmask SBR" is 0. Otherwise, the bus reset would appear to have succeeded
even though setting the bridge SBR bit had no effect.
Link: https://lore.kernel.org/linux-cxl/20240220203956.GA1502351@bhelgaas/
Link: https://lore.kernel.org/r/20240502165851.1948523-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: simplify commit log and comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into char-misc-testing
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a long-standing locking gap for missing pci_cfg_access_lock() while
manipulating bridge reset registers and configuration during
pci_reset_bus_function().
If there is an upstream bridge, lock it before locking the device itself.
pci_dev_lock() calls pci_cfg_access_lock(), which blocks the writing of PCI
config space by user space.
Add lockdep assertion via pci_dev->cfg_access_lock to verify
pci_dev->block_cfg_access is set.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502165851.1948523-3-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move PCI_DVSEC_VENDOR_ID_CXL in CXL private code to PCI_VENDOR_ID_CXL in
pci_ids.h in order to be utilized in PCI subsystem.
While the CXL Vendor ID (0x1e98) is not listed in the PCI SIG "Member
Companies" database at https://pcisig.com/membership/member-companies, the
SIG has confirmed that it is reserved by CXL.
Link: https://lore.kernel.org/r/20240502165851.1948523-2-dave.jiang@intel.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/linux-cxl/20240402172323.GA1818777@bhelgaas/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[bhelgaas: update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
