Implement the helpers for the new write code in cachefiles. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Implement the helpers for the new write code in 9p. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Implement the helpers for the new write code in afs. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Add some write-side stats to count buffered writes, buffered writethrough,
and writepages calls.
Whilst we're at it, clean up the naming on some of the existing stats
counters and organise the output into two sets.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
The current netfslib writeback implementation creates writeback requests of
contiguous folio data and then separately tiles subrequests over the space
twice, once for the server and once for the cache. This creates a few
issues:
(1) Every time there's a discontiguity or a change between writing to only
one destination or writing to both, it must create a new request.
This makes it harder to do vectored writes.
(2) The folios don't have the writeback mark removed until the end of the
request - and a request could be hundreds of megabytes.
(3) In future, I want to support a larger cache granularity, which will
require aggregation of some folios that contain unmodified data (which
only need to go to the cache) and some which contain modifications
(which need to be uploaded and stored to the cache) - but, currently,
these are treated as discontiguous.
There's also a move to get everyone to use writeback_iter() to extract
writable folios from the pagecache. That said, currently writeback_iter()
has some issues that make it less than ideal:
(1) there's no way to cancel the iteration, even if you find a "temporary"
error that means the current folio and all subsequent folios are going
to fail;
(2) there's no way to filter the folios being written back - something
that will impact Ceph with it's ordered snap system;
(3) and if you get a folio you can't immediately deal with (say you need
to flush the preceding writes), you are left with a folio hanging in
the locked state for the duration, when really we should unlock it and
relock it later.
In this new implementation, I use writeback_iter() to pump folios,
progressively creating two parallel, but separate streams and cleaning up
the finished folios as the subrequests complete. Either or both streams
can contain gaps, and the subrequests in each stream can be of variable
size, don't need to align with each other and don't need to align with the
folios.
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple folios, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated, and a subrequest may need splitting),
and doing RMW for content crypto if there's a conflicting change on
the server.
[!] Note that some of the functions are prefixed with "new_" to avoid
clashes with existing functions. These will be renamed in a later patch
that cuts over to the new algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Switch to using unsigned long long rather than loff_t in netfslib to avoid
problems with the sign flipping in the maths when we're dealing with the
byte at position 0x7fffffffffffffff.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Export writeback_iter() so that it can be used by netfslib as a module.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
Use mempools for allocating requests and subrequests in an effort to make
sure that allocation always succeeds so that when performing writeback we
can always make progress.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Remove support for ->launder_folio() from netfslib and expect filesystems
to use filemap_invalidate_inode() instead. netfs_launder_folio() can then
be got rid of.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: devel@lists.orangefs.org
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Implement a replacement for launder_folio. The key feature of
invalidate_inode_pages2() is that it locks each folio individually, unmaps
it to prevent mmap'd accesses interfering and calls the ->launder_folio()
address_space op to flush it. This has problems: firstly, each folio is
written individually as one or more small writes; secondly, adjacent folios
cannot be added so easily into the laundry; thirdly, it's yet another op to
implement.
Instead, use the invalidate lock to cause anyone wanting to add a folio to
the inode to wait, then unmap all the folios if we have mmaps, then,
conditionally, use ->writepages() to flush any dirty data back and then
discard all pages.
The invalidate lock prevents ->read_iter(), ->write_iter() and faulting
through mmap all from adding pages for the duration.
This is then used from netfslib to handle the flusing in unbuffered and
direct writes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: devel@lists.orangefs.org
Viktor Malik says:
====================
libbpf: support "module:function" syntax for tracing programs
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This change enables that by allowing the "module:function" syntax for
the find_kernel_btf_id function. Thanks to this, the syntax can be used
both from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
---
Changes in v2:
- stylistic changes (suggested by Andrii)
- added Andrii's ack to the second patch
====================
Link: https://lore.kernel.org/r/cover.1714469650.git.vmalik@redhat.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The previous patch added support for the "module:function" syntax for
tracing programs. This adds tests for explicitly specifying the module
name via the SEC macro and via the bpf_program__set_attach_target call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8a076168ed847f7c8a6c25715737b1fea84e38be.1714469650.git.vmalik@redhat.com
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This patch enables that by allowing the "module:function" syntax for the
find_kernel_btf_id function. Thanks to this, the syntax can be used both
from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
If the firmware has configured CXL event support to be firmware first
the OS will receive those events through CPER records. The CXL layer has
unique DPA to HPA knowledge and existing event trace parsing in
place.[0]
Add a CXL CPER work item and register it with the GHES code to process
CPER events.
Link: http://lore.kernel.org/r/cover.1711598777.git.alison.schofield@intel.com [0]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20240426-cxl-cper3-v4-2-58076cce1624@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
BIOS can configure memory devices as firmware first. This will send CXL
events to the firmware instead of the OS. The firmware can then inform
the OS of these events via UEFI.
UEFI v2.10 section N.2.14 defines a Common Platform Error Record (CPER)
format for CXL Component Events. The format is mostly the same as the
CXL Common Event Record Format. The difference lies in the use of a
GUID as the CPER Section Type which matches the UUID defined in CXL 3.1
Table 8-43.
Currently a configuration such as this will trace a non standard event
in the log omitting useful details of the event. In addition the CXL
sub-system contains additional region and HPA information useful to the
user.[0]
The CXL code is required to be called from process context as it needs
to take a device lock. The GHES code may be in interrupt context. This
complicated the use of a callback. Dan Williams suggested the use of
work items as an atomic way of switching between the callback execution
and a default handler.[1]
The use of a kfifo simplifies queue processing by providing lock free
fifo operations. cxl_cper_kfifo_get() allows easier management of the
kfifo between the ghes and cxl modules.
CXL 3.1 Table 8-127 requires a device to have a queue depth of 1 for
each of the four event logs. A combined queue depth of 32 is chosen to
provide room for 8 entries of each log type.
Add GHES support to detect CXL CPER records. Add the ability for the
CXL sub-system to register a work queue to process the events.
This patch adds back the functionality which was removed to fix the
report by Dan Carpenter[2].
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: http://lore.kernel.org/r/cover.1711598777.git.alison.schofield@intel.com [0]
Link: http://lore.kernel.org/r/65d111eb87115_6c745294ac@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: http://lore.kernel.org/r/b963c490-2c13-4b79-bbe7-34c6568423c7@moroto.mountain [2]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://lore.kernel.org/r/20240426-cxl-cper3-v4-1-58076cce1624@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A recent bugfix to cxl_pmem_region_alloc() to fix an
error-unwind-memleak [1], highlighted a use case for scope-based resource
management.
Delete the goto for releasing @cxl_region_rwsem, and return error codes
directly from error condition paths.
The caller, devm_cxl_add_pmem_region(), is no longer given @cxlr_pmem
directly it must retrieve it from @cxlr->cxlr_pmem. This retrieval from
@cxlr was already in place for @cxlr->cxl_nvb, and converting
cxl_pmem_region_alloc() to return an int makes it less awkward to handle
no_free_ptr().
Cc: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20240430174540.000039ce@Huawei.com
Link: http://lore.kernel.org/r/20240428030748.318985-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/171451430965.1147997.15782562063090960666.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <ef71f955531d5e41b20d801e1149bb08d155679a.1709886922.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit applies maintainer role of Intel vDPA
driver for myself.
I am the author of this driver and have been contributing to
it for long time, I would like to help this solution evolve
in future.
This driver is still under virtio maintenance.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240227144519.555554-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Having conditional around the of_node pointer of the drm_bridge structure
is not necessary anymore, since drm_bridge structure always has the of_node
member since the commit d8dfccde27 ("drm/bridge: Drop conditionals around
of_node pointers").
So drop the conditional, please also note that this patch is following the
convention used by driver core, see commit c9e358dfc4 ("driver-core:
remove conditionals around devicetree pointers").
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240501051323.805076-1-sui.jingfeng@linux.dev
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmYyS2oACgkQJNaLcl1U
h9AlSAf+NgAd1gg90evWysvl7bmkYqRulKjCR3/qXnuA1TMtCgb3skPEqwHZlF8B
Jj1C6oTelxJQj7ISdACEKE4I5fj2SnOKv2VbSohQymEhBsJKNCWzJjduX3mxVzj5
dBJWdEs6yWUslN2xPhiSAcxPej0Vqid64oBzoAhBCFnd8wTylCZUBV54guRGxDXQ
abrnx6Xvue3sAoWQlOJFP4xhOd1rwb7RA30Mih+ODdZ4kmprSr1wLyvFJSbOvcq3
snj1fctHJFW0XqL+Pk72+9nnf38+bOb67vUOPLsh9t1hCM7hfvMPwIEpccADHAhm
hJbIlaAXStWpLYL3vNspmaifPWS5Fg==
=Q9f5
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
As a follow on to the recent rework of __cxl_parse_cfmws() to always
return errors [1], use cleanup.h helpers to remove goto and other cleanups
now that logging is moved to the cxl_parse_cfmws() wrapper.
This ends up adding more code than it deletes, but __cxl_parse_cfmws()
itself does get smaller. The takeaway from the cond_no_free_ptr()
discussion [2] was to not add new macros to handle the cases where
no_free_ptr() is awkward, instead rework the code to have helpers and
clearer delineation of responsibility.
Now one might say that __free(del_cxl_resource) is excessive given it
is immediately registered with add_or_reset_cxl_resource(). The
rationale for keeping it is that it forces use of "no_free_ptr()" on the
argument passed to add_or_reset_cxl_resource(). That in turn makes it
clear that @res is NULL for the rest of the function which is part of
the point of the cleanup helpers, to turn subtle use after free errors
[3] into loud NULL pointer de-references.
Link: http://lore.kernel.org/r/170820177238.631006.1012639681618409284.stgit@dwillia2-xfh.jf.intel.com [1]
Link: http://lore.kernel.org/r/CAHk-=whBVhnh=KSeBBRet=E7qJAwnPR_aj5em187Q3FiD+LXnA@mail.gmail.com [2]
Link: http://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org [3]
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20240219124041.00002bda@Huawei.com
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/171235474028.2718248.14109646123143505522.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
There's a few simple driver specific fixes here, plus some core cleanups
from Matti which fix issues found with client drivers due to the API
being confusing. The two fixes for the stubs provide more constructive
behaviour with !REGULATOR configurations, issues were noticed with some
hwmon drivers which would otherwise have needed confusing bodges in the
users. The irq_helpers fix to duplicate the provided name for the
interrupt controller was found because a driver got this wrong and it's
again a case where the core is the sensible place to put the fix.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmYyTJMACgkQJNaLcl1U
h9A3swf7B2FEBbSebgtsCPWWurAxnHa5WvZnGnMELxtNvSPrLQfGSqayj3OdEKXX
C54fGrzEkWYKER8Y9qRt4+OTWqC6yvEHI5w8CO8DjvZdx1LpbItwAIa/IzVm0TJW
LZE5f9z8HsN/6yvNcyIltlhnSblYvBBWy60CF1CIf93uUtao9hAW80xLRvWxlTMW
Otl7FId3VgJINU7kZ4QII+8Wta9eP6uRpZwgPYS3oKQvfGXLcsZ+hGpITPX0HI/a
V81CwrofVcT/EA4qDc/Kf9VQtH6kqAI9OwNUWbWzq8z1DEivUE1ATAQn3jCLdtJu
YmIyCi+MAowyjcq8vUsnMURARBDEyg==
=ADux
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
If a vcpu exits for a data abort with an invalid syndrome, the
expectations are that userspace has a chance to save the day if
it has requested to see such exits.
However, this is completely futile in the case of a protected VM,
as none of the state is available. In this particular case, inject
a data abort directly into the vcpu, consistent with what userspace
could do.
This also helps with pKVM, which discards all syndrome information when
forwarding data aborts that are not known to be MMIO.
Finally, document this tweak to the API.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-31-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
For practical reasons as well as security related ones, not all
capabilities are supported for protected VMs in pKVM.
Add a function that restricts the capabilities for protected VMs.
This behaves as an allow-list to ensure that future capabilities
are checked for compatibility and security before being allowed
for protected VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-30-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Initialize r = -EINVAL to get rid of the error-path
initializations in kvm_vm_ioctl_enable_cap().
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-29-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM/arm64 makes use of the SMCCC "Vendor Specific Hypervisor Service
Call Range" to expose KVM-specific hypercalls to guests in a
discoverable and extensible fashion.
Document the existence of this interface and the discovery hypercall.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-28-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In preparation for describing the guest view of KVM/arm64 hypercalls in
hypercalls.rst, move the existing contents of the file concerning the
firmware pseudo-registers elsewhere.
Cc: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-27-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PTP hypercall documentation doesn't produce the best-looking table
when formatting in HTML as all of the return value definitions end up
on the same line.
Reformat the PTP hypercall documentation to follow the formatting used
by hypercalls.rst.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-26-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Expand comment clarifying why the host value representing SVE
vector length being restored for ZCR_EL1 on guest exit isn't the
same as it was on guest entry.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-21-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to determine whether or not a VM or vcpu are protected,
introduce helpers to query this state. While at it, use the vcpu
helper to check vcpus protected state instead of the kvm one.
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-19-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a helper allowing to check when the pkvm static key is enabled to
ease the introduction of pkvm hooks in other parts of the code.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-18-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Move the unlock earlier in user_mem_abort() to shorten the
critical section. This also helps for future refactoring and
reuse of similar code.
This moves out marking the page as dirty outside of the critical
section. That code does not interact with the stage-2 page
tables, which the read lock in the critical section protects.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-16-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Most exit handlers return <= 0 to indicate that the host needs to
handle the exit. Make kvm_handle_mmio_return() consistent with
the exit handlers in handle_exit(). This makes the code easier to
reason about, and makes it easier to add other handlers in future
patches.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-15-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the comment to clarify that __pkvm_vcpu_init_traps()
initializes traps for all VMs in protected mode, and not only
for protected VMs.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-14-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We've added a .data section for the hypervisor, which kmemleak is
eager to parse. This clearly doesn't go well, so add the section
to kmemleak's block list.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-13-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
pKVM maintains its own state at EL2 for tracking the host fpsimd
state. Therefore, no need to map and share the host's view with
it.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-12-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Rename __tlb_switch_to_{guest,host}() to
{enter,exit}_vmid_context() in VHE code to maintain symmetry
between the nVHE and VHE TLB invalidations.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-11-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Typically, TLB invalidation of guest stage-2 mappings using nVHE is
performed by a hypercall originating from the host. For the invalidation
instruction to be effective, therefore, __tlb_switch_to_{guest,host}()
swizzle the active stage-2 context around the TLBI instruction.
With guest-to-host memory sharing and unsharing hypercalls
originating from the guest under pKVM, there is need to support
both guest and host VMID invalidations issued from guest context.
Replace the __tlb_switch_to_{guest,host}() functions with a more general
{enter,exit}_vmid_context() implementation which supports being invoked
from guest context and acts as a no-op if the target context matches the
running context.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Break-before-make (BBM) can be expensive, as transitioning via an
invalid mapping (i.e. the "break" step) requires the completion of TLB
invalidation and can also cause other agents to fault concurrently on
the invalid mapping.
Since BBM is not required when changing only the software bits of a PTE,
avoid the sequence in this case and just update the PTE directly.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Don't just assume that the PTE is valid when checking whether it
describes an executable or cacheable mapping.
This makes sure that we don't issue CMOs for invalid mappings.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Under certain circumstances __get_fault_info() may resolve the faulting
address using the AT instruction. Given that this is being done outside
of the host lock critical section, it is racy and the resolution via AT
may fail. We currently BUG() in this situation, which is obviously less
than ideal. Moving the address resolution to the critical section may
have a performance impact, so let's keep it where it is, but bail out
and return to the host to try a second time.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
On the guest teardown path, pKVM will zero the pages used to back
the guest data structures before returning them to the host as
they may contain secrets (e.g. in the vCPU registers). However,
the zeroing is done using a cacheable alias, and CMOs are
missing, hence giving the host a potential opportunity to read
the original content of the guest structs from memory.
Fix this by issuing CMOs after zeroing the pages.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The lock is already initialized in core KVM code at
kvm_create_vm().
Fixes: 9d0c063a4d ("KVM: arm64: Instantiate pKVM hypervisor VM and vCPU structures from EL1")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
To avoid direct comparison against the fp_owner enum, add a new
function that performs the check, host_owns_fp_regs(), to
complement the existing guest_owns_fp_regs().
To check for fpsimd state ownership, use the helpers instead of
directly using the enums.
No functional change intended.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
guest_owns_fp_regs() will be used to check fpsimd state ownership
across kvm/arm64. Therefore, move it to kvm_host.h to widen its
scope.
Moreover, the host state is not per-vcpu anymore, the vcpu
parameter isn't used, so remove it as well.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since the host_fpsimd_state has been removed from kvm_vcpu_arch,
it isn't pointing to the hyp's version of the host fp_regs in
protected mode.
Initialize the host_data fpsimd_state point to the host_data's
context fp_regs on pKVM initialization.
Fixes: 51e09b5572 ("KVM: arm64: Exclude host_fpsimd_state pointer from kvm_vcpu_arch")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
