Commit graph

1,294,908 commits

Author SHA1 Message Date
Huacai Chen
ec2bbc575e LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-04-10 21:08:51 +08:00
Huacai Chen
1a629fe4cc LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE
When enabling both CONFIG_KFENCE and CONFIG_DEBUG_SG, I get the
following backtraces when running LongArch kernels.

[    2.496257] kernel BUG at include/linux/scatterlist.h:187!
...
[    2.501925] Call Trace:
[    2.501950] [<9000000004ad59c4>] sg_init_one+0xac/0xc0
[    2.502204] [<9000000004a438f8>] do_test_kpp+0x278/0x6e4
[    2.502353] [<9000000004a43dd4>] alg_test_kpp+0x70/0xf4
[    2.502494] [<9000000004a41b48>] alg_test+0x128/0x690
[    2.502631] [<9000000004a3d898>] cryptomgr_test+0x20/0x40
[    2.502775] [<90000000041b4508>] kthread+0x138/0x158
[    2.502912] [<9000000004161c48>] ret_from_kernel_thread+0xc/0xa4

The backtrace is always similar but not exactly the same. It is always
triggered from cryptomgr_test, but not always from the same test.

Analysis shows that with CONFIG_KFENCE active, the address returned from
kmalloc() and friends is not always below vm_map_base. It is allocated
by kfence_alloc() which at least sometimes seems to get its memory from
an address space above vm_map_base. This causes __virt_addr_valid() to
return false for the affected objects.

Let __virt_addr_valid() return 1 for kfence pool addresses, this make
virt_addr_valid()/__virt_addr_valid() work with KFENCE.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-04-10 21:08:51 +08:00
Huacai Chen
0ca84aeaee LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE
KFENCE changes virt_to_page() to be able to translate tlb mapped virtual
addresses, but forget to change virt_to_phys()/phys_to_virt() and other
translation functions as well. This patch fix it, otherwise some drivers
(such as nvme and virtio-blk) cannot work with KFENCE.

All {virt, phys, page, pfn} translation functions are updated:
1, virt_to_pfn()/pfn_to_virt();
2, virt_to_page()/page_to_virt();
3, virt_to_phys()/phys_to_virt().

DMW/TLB mapped addresses are distinguished by comparing the vaddress
with vm_map_base in virt_to_xyz(), and we define WANT_PAGE_VIRTUAL in
the KFENCE case for the reverse translations, xyz_to_virt().

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-04-10 21:08:51 +08:00
Huacai Chen
0871bc0129 mm: Move lowmem_page_address() a little later
LoongArch will override page_to_virt() which use page_address() in the
KFENCE case (by defining WANT_PAGE_VIRTUAL/HASHED_PAGE_VIRTUAL). So move
lowmem_page_address() a little later to avoid such build errors:

error: implicit declaration of function 'page_address'.

Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-04-10 21:08:51 +08:00
Len Brown
3ab7296a7e tools/power turbostat: v2024.04.10
Much of turbostat can now run with perf, rather than using the MSR driver

Some of turbostat can now run as a regular non-root user.

Add some new output columns for some new GFX hardware.

[This patch updates the version, but otherwise changes no function;
 it touches up some checkpatch issues from previous patches]

Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-10 09:07:57 -04:00
Uwe Kleine-König
29b39672bc
drm/bridge: imx8mp-hdmi-pvi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304090555.716327-2-u.kleine-koenig@pengutronix.de
2024-04-10 15:06:45 +02:00
Uros Bizjak
21689e4bfb locking/atomic/x86: Define arch_atomic_sub() family using arch_atomic_add() functions
There is no need to implement arch_atomic_sub() family of inline
functions, corresponding macros can be directly implemented using
arch_atomic_add() inlines with negated argument.

No functional changes intended.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-4-ubizjak@gmail.com
2024-04-10 15:04:55 +02:00
Uros Bizjak
95ece48165 locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions
Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions to
use arch_atomic64_try_cmpxchg().  This implementation avoids one extra
trip through the CMPXCHG loop.

The value preload before the cmpxchg loop does not need to be atomic.
Use arch_atomic64_read_nonatomic(v) to load the value from atomic_t
location in a non-atomic way.

The generated code improves from:

  1917d5:	31 c9                	xor    %ecx,%ecx
  1917d7:	31 db                	xor    %ebx,%ebx
  1917d9:	89 4c 24 3c          	mov    %ecx,0x3c(%esp)
  1917dd:	8b 74 24 24          	mov    0x24(%esp),%esi
  1917e1:	89 c8                	mov    %ecx,%eax
  1917e3:	89 5c 24 34          	mov    %ebx,0x34(%esp)
  1917e7:	8b 7c 24 28          	mov    0x28(%esp),%edi
  1917eb:	21 ce                	and    %ecx,%esi
  1917ed:	89 74 24 4c          	mov    %esi,0x4c(%esp)
  1917f1:	21 df                	and    %ebx,%edi
  1917f3:	89 de                	mov    %ebx,%esi
  1917f5:	89 7c 24 50          	mov    %edi,0x50(%esp)
  1917f9:	8b 54 24 4c          	mov    0x4c(%esp),%edx
  1917fd:	8b 7c 24 2c          	mov    0x2c(%esp),%edi
  191801:	8b 4c 24 50          	mov    0x50(%esp),%ecx
  191805:	89 d3                	mov    %edx,%ebx
  191807:	89 f2                	mov    %esi,%edx
  191809:	f0 0f c7 0f          	lock cmpxchg8b (%edi)
  19180d:	89 c1                	mov    %eax,%ecx
  19180f:	8b 74 24 34          	mov    0x34(%esp),%esi
  191813:	89 d3                	mov    %edx,%ebx
  191815:	89 44 24 4c          	mov    %eax,0x4c(%esp)
  191819:	8b 44 24 3c          	mov    0x3c(%esp),%eax
  19181d:	89 df                	mov    %ebx,%edi
  19181f:	89 54 24 44          	mov    %edx,0x44(%esp)
  191823:	89 ca                	mov    %ecx,%edx
  191825:	31 de                	xor    %ebx,%esi
  191827:	31 c8                	xor    %ecx,%eax
  191829:	09 f0                	or     %esi,%eax
  19182b:	75 ac                	jne    1917d9 <...>

to:

  1912ba:	8b 06                	mov    (%esi),%eax
  1912bc:	8b 56 04             	mov    0x4(%esi),%edx
  1912bf:	89 44 24 3c          	mov    %eax,0x3c(%esp)
  1912c3:	89 c1                	mov    %eax,%ecx
  1912c5:	23 4c 24 34          	and    0x34(%esp),%ecx
  1912c9:	89 d3                	mov    %edx,%ebx
  1912cb:	23 5c 24 38          	and    0x38(%esp),%ebx
  1912cf:	89 54 24 40          	mov    %edx,0x40(%esp)
  1912d3:	89 4c 24 2c          	mov    %ecx,0x2c(%esp)
  1912d7:	89 5c 24 30          	mov    %ebx,0x30(%esp)
  1912db:	8b 5c 24 2c          	mov    0x2c(%esp),%ebx
  1912df:	8b 4c 24 30          	mov    0x30(%esp),%ecx
  1912e3:	f0 0f c7 0e          	lock cmpxchg8b (%esi)
  1912e7:	0f 85 f3 02 00 00    	jne    1915e0 <...>

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-3-ubizjak@gmail.com
2024-04-10 15:04:55 +02:00
Uros Bizjak
e73c4e34a0 locking/atomic/x86: Introduce arch_atomic64_read_nonatomic() to x86_32
Introduce arch_atomic64_read_nonatomic() for 32-bit targets to load
the value from atomic64_t location in a non-atomic way. This
function is intended to be used in cases where a subsequent atomic
operation will handle the torn value, and can be used to prime the
first iteration of unconditional try_cmpxchg() loops.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-2-ubizjak@gmail.com
2024-04-10 15:04:54 +02:00
Uros Bizjak
276b893049 locking/atomic/x86: Introduce arch_atomic64_try_cmpxchg() to x86_32
Introduce arch_atomic64_try_cmpxchg() for 32-bit targets to use
optimized target specific implementation instead of a generic one.
This implementation eliminates dual-word compare after
cmpxchg8b instruction and improves generated asm code from:

    2273:	f0 0f c7 0f          	lock cmpxchg8b (%edi)
    2277:	8b 74 24 2c          	mov    0x2c(%esp),%esi
    227b:	89 d3                	mov    %edx,%ebx
    227d:	89 c2                	mov    %eax,%edx
    227f:	89 5c 24 10          	mov    %ebx,0x10(%esp)
    2283:	8b 7c 24 30          	mov    0x30(%esp),%edi
    2287:	89 44 24 1c          	mov    %eax,0x1c(%esp)
    228b:	31 f2                	xor    %esi,%edx
    228d:	89 d0                	mov    %edx,%eax
    228f:	89 da                	mov    %ebx,%edx
    2291:	31 fa                	xor    %edi,%edx
    2293:	09 d0                	or     %edx,%eax
    2295:	0f 85 a5 00 00 00    	jne    2340 <...>

to:

    2270:	f0 0f c7 0f          	lock cmpxchg8b (%edi)
    2274:	0f 85 a6 00 00 00    	jne    2320 <...>

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-1-ubizjak@gmail.com
2024-04-10 15:04:54 +02:00
Zhang Rui
91a91d3895 tools/power/turbostat: Add support for Xe sysfs knobs
Xe graphics driver uses different graphics sysfs knobs including
   /sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
   /sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
   /sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
   /sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
   /sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
   /sys/class/drm/card0/device/tile0/gt1/freq0/act_freq

Plus that,
   /sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.

Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10 09:02:58 -04:00
Zhang Rui
dc02dc937a tools/power/turbostat: Add support for new i915 sysfs knobs
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
   /sys/class/drm/card0/power/rc6_residency_ms
   /sys/class/drm/card0/gt_cur_freq_mhz
   /sys/class/drm/card0/gt_act_freq_mhz

At the same time, it also supports
   /sys/class/drm/card0/gt/gt0/rc6_residency_ms
   /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
   /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
   /sys/class/drm/card0/gt/gt1/rc6_residency_ms
   /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
   /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.

Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10 09:02:58 -04:00
Zhang Rui
3bbb331c1d tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.

Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.

Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10 09:02:44 -04:00
Uwe Kleine-König
801549ed6a x86/platform/olpc-xo1-sci: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/63c9d1e6b07296916e4218c63f59a2dd6c6b6b16.1712732665.git.u.kleine-koenig@pengutronix.de
2024-04-10 14:59:31 +02:00
Uwe Kleine-König
c741ccfdc0 x86/platform/olpc-x01-pm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/c7d669d8b0c994c77fb4c3bc7bec78aeb8659c74.1712732665.git.u.kleine-koenig@pengutronix.de
2024-04-10 14:59:31 +02:00
Uwe Kleine-König
bcc0403eb4 x86/platform/iris: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/adb9b0aca77d7aa8e54d0a664a4ee290834a60a1.1712732665.git.u.kleine-koenig@pengutronix.de
2024-04-10 14:59:30 +02:00
Zhang Rui
acf68d98ca perf/x86/rapl: Add support for Intel Lunar Lake
Lunar Lake RAPL support is the same as previous Sky Lake.
Add Lunar Lake model for RAPL.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240410124554.448987-2-rui.zhang@intel.com
2024-04-10 14:48:18 +02:00
Zhang Rui
fb70fe74be perf/x86/rapl: Add support for Intel Arrow Lake
Arrow Lake RAPL support is the same as previous Sky Lake.
Add Arrow Lake model for RAPL.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240410124554.448987-1-rui.zhang@intel.com
2024-04-10 14:48:18 +02:00
Jani Nikula
0396403c01 drm/i915/pps: move pps debugfs file to intel_pps.c
Continue with placing debugfs next to the implementation.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408094357.3085319-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-10 14:34:48 +03:00
Wolfram Sang
fb24c1396f drm: tilcdc: don't use devm_pinctrl_get_select_default() in probe
Since commit ab78029ecc ("drivers/pinctrl: grab default handles from
device core"), we can rely on device core for setting the default pins.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230922073714.6164-1-wsa+renesas@sang-engineering.com
2024-04-10 14:27:00 +03:00
Krzysztof Kozlowski
a210aaf7e8 drm/omap: dmm_tiler: drop driver owner assignment
Core in platform_driver_register() already sets the .owner, so driver
does not need to.  Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330202804.83936-1-krzysztof.kozlowski@linaro.org
2024-04-10 14:14:58 +03:00
Dan Carpenter
6b2da5b996 drm: xlnx: db: fix a memory leak in probe
Free "dp" before returning.

Fixes: be318d01a9 ("drm: xlnx: dp: Reset DisplayPort IP")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/86def134-9537-4939-912e-3a424e3a75b6@moroto.mountain
2024-04-10 14:13:04 +03:00
Tomi Valkeinen
a18815ac7b MAINTAINERS: Add myself as maintainer for Xilinx DRM drivers
Add myself as a co-maintainer for Xilinx DRM drivers to help Laurent.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327-xilinx-maintainer-v1-1-c5fdc115f448@ideasonboard.com
2024-04-10 14:13:04 +03:00
Roman Smirnov
3b84adf460 udf: udftime: prevent overflow in udf_disk_stamp_to_time()
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
2024-04-10 13:10:12 +02:00
Yangyu Chen
cd899f85b1 riscv: config: enable ARCH_CANAAN in defconfig
Since K230 has been supported, allow ARCH_CANAAN to be selected to build dt
and drivers for it in defconfig.

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-10 11:42:13 +01:00
Conor Dooley
1553a1c482 RISC-V: drop SOC_VIRT for ARCH_VIRT
The ARCH_ and SOC_ versions of this symbol have persisted for quite a
while now in parallel. Generated .config files from previous LTS kernels
should have both. Finally remove SOC_VIRT and update all config files
using it.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-10 11:37:50 +01:00
Conor Dooley
d2a351e637 RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
All the users in the kernel are gone and generated .config files from
previous LTS kernels will contain ARCH_SIFIVE. Drop SOC_SIFIVE and
update the defconfig.

Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-10 11:35:34 +01:00
Conor Dooley
37c09ed419 RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
SOC_MICROCHIP_POLARFIRE doesn't have any remaining in-kernel users, so
time has come to remove it. Foolish auld me left the "POLARFIRE" in the
new, hidden, config option when I renamed it and changed all of the
users however. As HPSC has been announced, and is not a PolarFire,
drop mention of that specific FPGA family from the new user-visible
config option.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-10 11:34:27 +01:00
Heiner Kallweit
19fa4f2a85 r8169: fix LED-related deadlock on module removal
Binding devm_led_classdev_register() to the netdev is problematic
because on module removal we get a RTNL-related deadlock. Fix this
by avoiding the device-managed LED functions.

Note: We can safely call led_classdev_unregister() for a LED even
if registering it failed, because led_classdev_unregister() detects
this and is a no-op in this case.

Fixes: 18764b883e ("r8169: add support for LED's on RTL8168/RTL8101")
Cc: stable@vger.kernel.org
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-10 10:44:29 +01:00
Michal Wajdeczko
3df49b2e71 drm/xe: Add SR-IOV info attribute to debugfs
As SR-IOV support varies between platforms and the driver can run
in different SR-IOV modes, add debugfs file with these details.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-4-michal.wajdeczko@intel.com
2024-04-10 11:26:21 +02:00
Michal Wajdeczko
146e438495 drm/xe: Add proper detection of the SR-IOV PF mode
SR-IOV PF mode detection is based on PCI capability as reported by
the PCI dev_is_pf() function and additionally on 'max_vfs' module
parameter which could be also used to disable PF capability even
if SR-IOV PF capability is reported by the hardware.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-3-michal.wajdeczko@intel.com
2024-04-10 11:26:18 +02:00
Michal Wajdeczko
e806fac0bd drm/xe: Add max_vfs module parameter
We want to have an option to limit the number of the VFs that the
PF driver will be able to manage.  With this limit set to zero we
will also have a way to completely disable the PF functionality.

Since we currently don't support SR-IOV on any platform, we start
with this limit set to zero by default.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404154431.583-2-michal.wajdeczko@intel.com
2024-04-10 11:26:17 +02:00
Michal Wajdeczko
a918e771e6 drm/xe: Check pat.ops before dumping PAT settings
We may leave pat.ops unset when running on brand new platform or
when running as a VF.  While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.

It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409105106.1067-2-michal.wajdeczko@intel.com
2024-04-10 11:21:48 +02:00
Michal Wajdeczko
5d6678882d drm/xe: Assert pat.ops function pointers
Make sure that pat.ops (if selected) has all required function
pointers setup. Only .program_media may be omitted if we have
older media version.

This should help avoid late runtime checks against individual
function pointers.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409105106.1067-1-michal.wajdeczko@intel.com
2024-04-10 11:21:47 +02:00
Neil Armstrong
fde2d69c16 arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
This adds a basic devicetree for the MNT Reform2 DIY laptop when using a
CM4 adapter and a BPI-CM4 module.

Co-developed-by: Lukas F. Hartmann <lukas@mntre.com>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-7-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-10 10:53:24 +02:00
Neil Armstrong
2a885bad5b arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.

Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-6-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-10 10:53:24 +02:00
Neil Armstrong
6f1c2a12ed arm64: meson: g12-common: add the MIPI DSI nodes
Add the MIPI DSI Analog & Digital PHY nodes and the DSI control
nodes with proper port endpoint to the VPU.

Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-5-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-10 10:53:24 +02:00
Neil Armstrong
ef5a84d716 dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
The MNT Reform 2 CM4 adapter can be populated with any Raspberry Pi CM4
compatible module such as a BPI-CM4 Module, document that.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-1-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-04-10 10:53:24 +02:00
Thomas Gleixner
f87cbcb345 timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpu
tick_do_timer_cpu is used lockless to check which CPU needs to take care
of the per tick timekeeping duty. This is done to avoid a thundering
herd problem on jiffies_lock.

The read and writes are not annotated so KCSAN complains about data races:

  BUG: KCSAN: data-race in tick_nohz_idle_stop_tick / tick_nohz_next_event

  write to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 26:
   tick_nohz_idle_stop_tick+0x3b1/0x4a0
   do_idle+0x1e3/0x250

  read to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 16:
   tick_nohz_next_event+0xe7/0x1e0
   tick_nohz_get_sleep_length+0xa7/0xe0
   menu_select+0x82/0xb90
   cpuidle_select+0x44/0x60
   do_idle+0x1c2/0x250

  value changed: 0x0000001a -> 0xffffffff

Annotate them with READ/WRITE_ONCE() to document the intentional data race.

Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/87cyqy7rt3.ffs@tglx
2024-04-10 10:13:42 +02:00
Arnd Bergmann
452d8950db power: rt9455: hide unused rt9455_boost_voltage_values
The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:

drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]

Enclose the definition in the same #ifdef as the references to it.

Fixes: e86d69dd78 ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-04-10 09:57:29 +02:00
Gil Fine
dcd12acaf3 thunderbolt: Avoid notify PM core about runtime PM resume
Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).

While there add the missing kernel-doc for tb_switch_resume().

Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-04-10 10:49:58 +03:00
Gil Fine
c38fa07dc6 thunderbolt: Fix wake configurations after device unplug
Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.

Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-04-10 10:49:58 +03:00
Jani Nikula
f5d65f40bd drm: remove unused header gma_drm.h
gma_drm.h has become an empty, unused header. Remove.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408104230.3191827-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-10 10:48:07 +03:00
Muhammed Efe Cetin
8711dca3b5 arm64: dts: rockchip: Add SFC to Khadas Edge 2
This commit adds SPI flash support for Khadas Edge 2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/00942603f7e61ecb2a0067bebf6795dab3571613.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10 09:47:30 +02:00
Neil Armstrong
e0892cb473 clk: meson: fix module license to GPL only
Fix the checkpatch warning:
WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240408-amlogic-v6-9-upstream-fix-clk-module-license-v1-1-366ddc0f3db9@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2024-04-10 09:47:18 +02:00
Muhammed Efe Cetin
25e31aaebe arm64: dts: rockchip: Add saradc and adc buttons to Khadas Edge 2 and enable tsadc
This commit enables tsadc, saradc and the
function button on saradc line for Khadas Edge 2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/03feaafefd0c13268ba1630251558749654a567d.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10 09:46:33 +02:00
Neil Armstrong
b70cb1a21a clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.

The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel

vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.

In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT or manually set by the display driver at some point.

The following clock scheme is to be used for DSI:

xtal
\_ gp0_pll_dco
   \_ gp0_pll
      |- vclk2_sel
      |  \_ vclk2_input
      |     \_ vclk2_div
      |        \_ vclk2
      |           \_ vclk2_div1
      |              \_ cts_encl_sel
      |                 \_ cts_encl	-> to VPU LCD Encoder
      |- mipi_dsi_pxclk_sel
      \_ mipi_dsi_pxclk_div
         \_ mipi_dsi_pxclk		-> to DSI controller

The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.

The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
DSI bitclock is the reference base clock to calculate the vclk2_div value
when pixel clock is set on the cts_encl endpoint.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-3-99ecdfdc87fc@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2024-04-10 09:46:21 +02:00
Neil Armstrong
bb5aa08572 clk: meson: add vclk driver
The VCLK and VCLK_DIV clocks have supplementary bits.

The VCLK gate has a "SOFT RESET" bit to toggle after the whole
VCLK sub-tree rate has been set, this is implemented in
the gate enable callback.

The VCLK_DIV clocks as enable and reset bits used to disable
and reset the divider, associated with CLK_SET_RATE_GATE it ensures
the rate is set while the divider is disabled and in reset mode.

The VCLK_DIV enable bit isn't implemented as a gate since it's part
of the divider logic and vendor does this exact sequence to ensure
the divider is correctly set.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-2-99ecdfdc87fc@linaro.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2024-04-10 09:46:21 +02:00
Muhammed Efe Cetin
af6943f502 arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2
Khadas Edge 2 exposes IR receiver pins as same as TF card via EXTIO. The
IR receiver is connected to MCU and SoC.

The board also has 2 PWM RGB leds. One is controlled by MCU and the
other is controlled by SoC. This commit adds support for the led
controlled by SoC using pwm-leds.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/335629f57e593e20418a4a55a1e662505640cbde.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10 09:45:34 +02:00
Muhammed Efe Cetin
f786eda805 arm64: dts: rockchip: USB2, USB3 Host, PCIe2 to Khadas Edge 2
Khadas Edge 2 has 1x USB2 with hub, 1x USB3 Host and 1x USB-C.
This commit adds support for PCIe2, USB3 Host and USB2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/4d22afd70e5583458f405f5170f67690584e7efa.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-10 09:43:19 +02:00