Leonardo Bras <leobras@redhat.com> says:
I just saw the opportunity of optimizing the helper is_compat_task() by
introducing a compile-time test, and it made possible to remove some
#ifdef's without any loss of performance.
I also saw the possibility of removing the direct check of task flags from
general code, and concentrated it in asm/compat.h by creating a few more
helpers, which in the end helped optimize code.
arch_get_mmap_end() just got a simple improvement and some extra docs.
* b4-shazam-merge:
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
Link: https://lore.kernel.org/r/20240103160024.70305-2-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Our definitions for bit 7 and bit 0 of ICL_PORT_TX_DW6 are
swapped. Functionally it doesn't matter as we always set both
bits, but let's rename the bits to match bspec 100%.
And while at it, add the definition for bits 1-6 as well, just
to have it all fully documented.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308072400.28918-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit:
68fb3ca0e4 ("x86/percpu: Disable named address spaces for KASAN")
... disabled support for named address spaces with KASAN due to
the incompatibility issue between named AS and KASAN.
GCC 13.3 has fixed this issue (GCC PR sanitizer/111736) so the
support for named address spaces can be re-enabled with KASAN
for GCC compiler version >= 13.3.
Note that the patch considers GCC 14 to be fixed - if somebody is
using snapshots of the GCC 14 before the fix, they should upgrade.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240320124603.566923-1-ubizjak@gmail.com
Move raw_percpu_xchg_op() together with this_percpu_xchg_op()
and trivially rename some internal variables to harmonize them
between macro implementations.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240320083127.493250-2-ubizjak@gmail.com
Rewrite percpu_xchg_op() using generic percpu primitives instead
of using asm. The new implementation is similar to local_xchg() and
allows the compiler to perform various optimizations: e.g. the
compiler is able to create fast path through the loop, according
to likely/unlikely annotations in percpu_try_cmpxchg_op().
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240320083127.493250-1-ubizjak@gmail.com
Subbaraya Sundeep says:
====================
octeontx2-pf: RVU Mailbox fixes
This patchset fixes the problems related to RVU mailbox.
During long run tests some times VF commands like setting
MTU or toggling interface fails because VF mailbox is timedout
waiting for response from PF.
Below are the fixes
Patch 1: There are two types of messages in RVU mailbox namely up and down
messages. Down messages are synchronous messages where a PF/VF sends
a message to AF and AF replies back with response. UP messages are
notifications and are asynchronous like AF sending link events to
PF. When VF sends a down message to PF, PF forwards to AF and sends
the response from AF back to VF. PF has to forward VF messages since
there is no path in hardware for VF to send directly to AF.
There is one mailbox interrupt from AF to PF when raised could mean
two scenarios one is where AF sending reply to PF for a down message
sent by PF and another one is AF sending up message asynchronously
when link changed for that PF. Receiving the up message interrupt while
PF is in middle of forwarding down message causes mailbox errors.
Fix this by receiver detecting the type of message from the mbox data register
set by sender.
Patch 2:
During VF driver remove, VF has to wait until last message is
completed and then turn off mailbox interrupts from PF.
Patch 3:
Do not use ordered workqueue for message processing since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Patch 4:
When sending link event to VF by PF check whether VF is really up to
receive this message.
Patch 5:
In AF driver, use separate interrupt handlers for the AF-VF interrupt and
AF-PF interrupt. Sometimes both interrupts are raised to two CPUs at same
time and both CPUs execute same function at same time corrupting the data.
v2 changes:
Added missing mutex unlock in error path in patch 1
Refactored if else logic in patch 1 as suggested by Paolo Abeni
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.
Fixes: 7304ac4567 ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When PF sending link status messages to VF, it is possible
that by the time link_event_task work function is executed
VF might have brought down. Hence before sending VF link
status message check whether VF is up to receive it.
Fixes: ad513ed938 ("octeontx2-vf: Link event notification support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only one execution context for the workqueue used for PF and
VFs mailbox communication is incorrect since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Hence use default number of execution contexts by passing zero
as max_active to alloc_workqueue function. With this fix in place,
modify UP messages also to wait until completion.
Fixes: d424b6c024 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During VF driver remove, a message is sent to detach VF
resources to PF but VF is not waiting until message is
complete. Also mailbox interrupts need to be turned off
after the detach resource message is complete. This patch
fixes that problem.
Fixes: 05fcc9e089 ("octeontx2-pf: Attach NIX and NPA block LFs")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.
Fixes: 5a6d7c9dae ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BOs in a bulk move must share all the same reservation object
to make sure that we lock the whole bulk during eviction.
Actually document and enforce that with a warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312105555.3065-1-christian.koenig@amd.com
Due to an error during rebasing the patchset 320 MHz channel support got
broken. ath12k was setting the QoS bit instead of the correct flag.
WMI_PEER_EXT_320MHZ (0x2) is defined as an extended flag, replace
peer_flags by peer_flags_ext while sending peer data.
This affected both QCN9274 and WCN7850 which use the same flag.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: 6734cf9b4c ("wifi: ath12k: peer assoc for 320 MHz")
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240314204651.11075-1-quic_alokad@quicinc.com
Some of the backported intel_uncore_read*() functions used the wrong
types. Change the function declarations accordingly.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314065221.1181158-1-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are some duplicate definitions in wmi.h, remove them.
No functional changes, compile tested only.
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240314021830.305021-1-quic_kangyang@quicinc.com
In tx completion, status desc is obtained from offsetting the address
from wbm ring. Having HTT_TX_WBM_COMP_STATUS_OFFSET(8) and reserved 8
bytes in status desc offsets the address twice and read the values
from the incorrect address. Hence, remove the
HTT_TX_WBM_COMP_STATUS_OFFSET from wbm completion address calculation.
Also this patch is applicable for WCN7850.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240311180708.9334-1-quic_tmariyap@quicinc.com
Considering the caller of the GGTT functions should keep the
backing storage alive before the function completes, it's not
necessary to invalidate with the GGTT lock held. This just adds
latency for every user of the GGTT.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306052002.311196-5-matthew.brost@intel.com
Add XE_BO_GGTT_INVALIDATE flag which indicates the GGTT should be
invalidated when a BO is added / removed from the GGTT. This is
typically set when a BO is used by the GuC as the GuC has GGTT TLBs.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
[mlankhorst: Small fix to only inherit GGTT_INVALIDATE from src bo]
[mlankhorst: Remove _BIT from name]
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306052002.311196-4-matthew.brost@intel.com
Only buffers mapped in the GGTT used by the GuC require an invalidation.
Display buffers do not require an invalidation. Delete the invalidatio
from display code and make invalidation a static function in xe_ggtt.c.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306052002.311196-3-matthew.brost@intel.com
The OV7251 sensor only has a single data lane, so 2 entries is not valid.
Fix this to be 1 entry as the schema specifies.
The schema validation doesn't catch this currently due to some limitations
in handling of arrays vs. matrices, but a fix is being worked on.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
If due to a memory allocation failure mock_chain() returns NULL, it is
passed to dma_fence_enable_sw_signaling() resulting in NULL pointer
dereference there.
Call dma_fence_enable_sw_signaling() only if mock_chain() succeeds.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d62c43a953 ("dma-buf: Enable signaling on fence for selftests")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319231527.1821372-1-p.sakharov@ispras.ru
Add git tree to manage all Realtek WiFi drivers except RTL8180 which is
old and orphan.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240319011925.6855-1-pkshih@realtek.com
Some hardware designs with multiple PCA954x devices use a reset GPIO
connected to all the muxes. Support this configuration by making use of
the reset controller framework which can deal with the shared reset
GPIOs. Fall back to the old GPIO descriptor method if the reset
controller framework is not enabled.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
Two device trees have been added, but those need to be applied
elsewhere.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZfLnNBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uSSkBAKl75gzjiN2AglPaTUDfhCeux8yf
mISgvl4MWKCXXsZ5AQDjRiG+whrV7knOjS7L/r5owb30uF+Bv3d29sG4LVNsBQ==
=RubU
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.9-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Théo adds support for the Mobileye EyeQ5-I2C in the bindings.
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
When benchmarking with multiple threads (-pN, where N>1), we start
contending on single atomic counter that both BPF trigger benchmarks are
using, as well as "baseline" tests in user space (trig-base and
trig-uprobe-base benchmarks). As such, we start bottlenecking on
something completely irrelevant to benchmark at hand.
Scale counting up by using per-CPU counters on BPF side. On use space
side we do the next best thing: hash thread ID to approximate per-CPU
behavior. It seems to work quite well in practice.
To demonstrate the difference, I ran three benchmarks with 1, 2, 4, 8,
16, and 32 threads:
- trig-uprobe-base (no syscalls, pure tight counting loop in user-space);
- trig-base (get_pgid() syscall, atomic counter in user-space);
- trig-fentry (syscall to trigger fentry program, atomic uncontended per-CPU
counter on BPF side).
Command used:
for b in uprobe-base base fentry; do \
for p in 1 2 4 8 16 32; do \
printf "%-11s %2d: %s\n" $b $p \
"$(sudo ./bench -w2 -d5 -a -p$p trig-$b | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-)"; \
done; \
done
Before these changes, aggregate throughput across all threads doesn't
scale well with number of threads, it actually even falls sharply for
uprobe-base due to a very high contention:
uprobe-base 1: 138.998 ± 0.650M/s
uprobe-base 2: 70.526 ± 1.147M/s
uprobe-base 4: 63.114 ± 0.302M/s
uprobe-base 8: 54.177 ± 0.138M/s
uprobe-base 16: 45.439 ± 0.057M/s
uprobe-base 32: 37.163 ± 0.242M/s
base 1: 16.940 ± 0.182M/s
base 2: 19.231 ± 0.105M/s
base 4: 21.479 ± 0.038M/s
base 8: 23.030 ± 0.037M/s
base 16: 22.034 ± 0.004M/s
base 32: 18.152 ± 0.013M/s
fentry 1: 14.794 ± 0.054M/s
fentry 2: 17.341 ± 0.055M/s
fentry 4: 23.792 ± 0.024M/s
fentry 8: 21.557 ± 0.047M/s
fentry 16: 21.121 ± 0.004M/s
fentry 32: 17.067 ± 0.023M/s
After these changes, we see almost perfect linear scaling, as expected.
The sub-linear scaling when going from 8 to 16 threads is interesting
and consistent on my test machine, but I haven't investigated what is
causing it this peculiar slowdown (across all benchmarks, could be due
to hyperthreading effects, not sure).
uprobe-base 1: 139.980 ± 0.648M/s
uprobe-base 2: 270.244 ± 0.379M/s
uprobe-base 4: 532.044 ± 1.519M/s
uprobe-base 8: 1004.571 ± 3.174M/s
uprobe-base 16: 1720.098 ± 0.744M/s
uprobe-base 32: 3506.659 ± 8.549M/s
base 1: 16.869 ± 0.071M/s
base 2: 33.007 ± 0.092M/s
base 4: 64.670 ± 0.203M/s
base 8: 121.969 ± 0.210M/s
base 16: 207.832 ± 0.112M/s
base 32: 424.227 ± 1.477M/s
fentry 1: 14.777 ± 0.087M/s
fentry 2: 28.575 ± 0.146M/s
fentry 4: 56.234 ± 0.176M/s
fentry 8: 106.095 ± 0.385M/s
fentry 16: 181.440 ± 0.032M/s
fentry 32: 369.131 ± 0.693M/s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240315213329.1161589-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d98822 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit d510296d33 ("bpftool: Use syscall/loader program in "prog load"
and "gen skeleton" command.") added new files to the list of objects to
compile in order to build the bootstrap version of bpftool. As far as I
can tell, these objects are unnecessary and were added by mistake; maybe
a draft version intended to add support for loading loader programs from
the bootstrap version. Anyway, we can remove these object files from the
list to make the bootstrap bpftool binary a tad smaller and faster to
build.
Fixes: d510296d33 ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Message-ID: <20240320013457.44808-1-qmo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When trying to load the pid_iter BPF program used to iterate over the
PIDs of the processes holding file descriptors to BPF links, we would
unconditionally silence libbpf in order to keep the output clean if the
kernel does not support iterators and loading fails.
Although this is the desirable behaviour in most cases, this may hide
bugs in the pid_iter program that prevent it from loading, and it makes
it hard to debug such load failures, even in "debug" mode. Instead, it
makes more sense to print libbpf's logs when we pass the -d|--debug flag
to bpftool, so that users get the logs to investigate failures without
having to edit bpftool's source code.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Message-ID: <20240320012241.42991-1-qmo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
BPF raw tracepoint support for BPF cookie
Add ability to specify and retrieve BPF cookie for raw tracepoint programs.
Both BTF-aware (SEC("tp_btf")) and non-BTF-aware (SEC("raw_tp")) are
supported, as they are exactly the same at runtime.
This issue recently came up in production use cases, where custom tried to
switch from slower classic tracepoints to raw tracepoints and ran into this
limitation. Luckily, it's not that hard to support this for raw_tp programs.
v2->v3:
- s/bpf_raw_tp_open/bpf_raw_tracepoint_open_opts/ (Alexei, Eduard);
v1->v2:
- fixed type definition for stubs of bpf_probe_{register,unregister};
- added __u32 :u32 and aligned raw_tp fields (Jiri);
- added Stanislav's ack.
====================
Link: https://lore.kernel.org/r/20240319233852.1977493-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test validating BPF cookie can be passed during raw_tp/tp_btf
attachment and can be retried at runtime with bpf_get_attach_cookie()
helper.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-6-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wire up BPF cookie passing or raw_tp and tp_btf programs, both in
low-level and high-level APIs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-5-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wire up BPF cookie for raw tracepoint programs (both BTF and non-BTF
aware variants). This brings them up to part w.r.t. BPF cookie usage
with classic tracepoint and fentry/fexit programs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-4-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of passing prog as an argument to bpf_trace_runX() helpers, that
are called from tracepoint triggering calls, store BPF link itself
(struct bpf_raw_tp_link for raw tracepoints). This will allow to pass
extra information like BPF cookie into raw tracepoint registration.
Instead of replacing `struct bpf_prog *prog = __data;` with
corresponding `struct bpf_raw_tp_link *link = __data;` assignment in
`__bpf_trace_##call` I just passed `__data` through into underlying
bpf_trace_runX() call. This works well because we implicitly cast `void *`,
and it also avoids naming clashes with arguments coming from
tracepoint's "proto" list. We could have run into the same problem with
"prog", we just happened to not have a tracepoint that has "prog" input
argument. We are less lucky with "link", as there are tracepoints using
"link" argument name already. So instead of trying to avoid naming
conflicts, let's just remove intermediate local variable. It doesn't
hurt readibility, it's either way a bit of a maze of calls and macros,
that requires careful reading.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-3-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_probe_register() and __bpf_probe_register() have identical
signatures and bpf_probe_register() just redirect to
__bpf_probe_register(). So get rid of this extra function call step to
simplify following the source code.
It has no difference at runtime due to inlining, of course.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-2-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A64_LDRSW() takes three registers: Xt, Xn, Xm as arguments and it loads
and sign extends the value at address Xn + Xm into register Xt.
Currently, the offset is being directly used in place of the tmp
register which has the offset already loaded by the last emitted
instruction.
This will cause JIT failures. The easiest way to reproduce this is to
test the following code through test_bpf module:
{
"BPF_LDX_MEMSX | BPF_W",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x00000000deadbeefULL),
BPF_LD_IMM64(R2, 0xffffffffdeadbeefULL),
BPF_STX_MEM(BPF_DW, R10, R1, -7),
BPF_LDX_MEMSX(BPF_W, R0, R10, -7),
BPF_JMP_REG(BPF_JNE, R0, R2, 1),
BPF_ALU64_IMM(BPF_MOV, R0, 0),
BPF_EXIT_INSN(),
},
INTERNAL,
{ },
{ { 0, 0 } },
.stack_depth = 7,
},
We need to use the offset as -7 to trigger this code path, there could
be other valid ways to trigger this from proper BPF programs as well.
This code is rejected by the JIT because -7 is passed to A64_LDRSW() but
it expects a valid register (0 - 31).
roott@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
[11300.490371] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
[11300.491750] test_bpf: #345 BPF_LDX_MEMSX | BPF_W
[11300.493179] aarch64_insn_encode_register: unknown register encoding -7
[11300.494133] aarch64_insn_encode_register: unknown register encoding -7
[11300.495292] FAIL to select_runtime err=-524
[11300.496804] test_bpf: Summary: 0 PASSED, 1 FAILED, [0/0 JIT'ed]
modprobe: ERROR: could not insert 'test_bpf': Invalid argument
Applying this patch fixes the issue.
root@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
[ 292.837436] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
[ 292.839416] test_bpf: #345 BPF_LDX_MEMSX | BPF_W jited:1 156 PASS
[ 292.844794] test_bpf: Summary: 1 PASSED, 0 FAILED, [1/1 JIT'ed]
Fixes: cc88f540da ("bpf, arm64: Support sign-extension load instructions")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240312235917.103626-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's been reported that (void *)map->map_extra is causing compilation
warnings on 32-bit architectures. It's easy enough to fix this by
casting to long first.
Fixes: 79ff13e991 ("libbpf: Add support for bpf_arena.")
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319215143.1279312-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kui-Feng Lee reported a crash on s390x triggered by the
dummy_st_ops/dummy_init_ptr_arg test [1]:
[<0000000000000002>] 0x2
[<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250
[<000000000033145a>] __sys_bpf+0xa1a/0xd00
[<00000000003319dc>] __s390x_sys_bpf+0x44/0x50
[<0000000000c4382c>] __do_syscall+0x244/0x300
[<0000000000c59a40>] system_call+0x70/0x98
This is caused by GCC moving memcpy() after assignments in
bpf_jit_plt(), resulting in NULL pointers being written instead of
the return and the target addresses.
Looking at the GCC internals, the reordering is allowed because the
alias analysis thinks that the memcpy() destination and the assignments'
left-hand-sides are based on different objects: new_plt and
bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot
alias.
This is in turn due to a violation of the C standard:
When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object
...
From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects
and cannot be subtracted. In the practical terms, doing so confuses the
GCC's alias analysis.
The code was written this way in order to let the C side know a few
offsets defined in the assembly. While nice, this is by no means
necessary. Fix the noncompliance by hardcoding these offsets.
[1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/
Fixes: f1d5df84cd ("s390/bpf: Implement bpf_arch_text_poke()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240320015515.11883-1-iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure exec queue freeing happens at one place, that is in
__xe_exec_queue_free(). It releases q->vm reference also. Set
q->vm before handling extensions as they can potentially reference it.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319175947.15890-1-niranjana.vishwanathapura@intel.com
Abstract out the core part of sched_done and deregister_done handlers
to separate functions to decouple them from any protocol error handling
part and make them more readable.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319184153.16667-1-niranjana.vishwanathapura@intel.com
For Earlier platforms, the Pipe source size is 12-bits so
max pipe source width and height is 4096. For newer platforms it is
13-bits so theoretically max width/height is 8192. For few of the
earlier platforms the scaler did not use all bits of the PIPESRC,
so max scaler source size was used to make that the pipe source
size is programmed within limits, before using scaler.
This creates a problem, for MTL where scaler source size is 4096, but
max pipe source width can theroretically be 8192.
Switch the check to use the max scaler destination size, which closely
match the limits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313143825.3461208-1-ankit.k.nautiyal@intel.com
The timerlat tracer provides an interface for any application to wait
for the timerlat's periodic wakeup. Currently, rtla timerlat uses it
to dispatch its user-space workload (-u option).
But as the tracer interface is generic, rtla timerlat can also be used
to monitor any workload that uses it. For example, a user might
place their own workload to wait on the tracer interface, and
monitor the results with rtla timerlat.
Add the -U option to rtla timerlat top and hist. With this option, rtla
timerlat will not dispatch its workload but only setting up the
system, waiting for a user to dispatch its workload.
The sample code in this patch is an example of python application
that loops in the timerlat tracer fd.
To use it, dispatch:
# rtla timerlat -U
In a terminal, then run the python program on another terminal,
specifying the CPU to run it. For example, setting on CPU 1:
#./timerlat_load.py 1
Then rtla timerlat will start printing the statistics of the
./timerlat_load.py app.
An interesting point is that the "Ret user Timer Latency" value
is the overall response time of the load. The sample load does
a memory copy to exemplify that.
The stop tracing options on rtla timerlat works in this setup
as well, including auto analysis.
Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rv, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
Link: https://lkml.kernel.org/r/2a38a8f7b8dc65fa790381ec9ab42fb62beb2e25.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rtla, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
rtla is built using perf infra-structure when building inside the
kernel tree.
At this point, rtla diverges from perf in two points: Documentation
and tarball generation/build.
At the documentation level, rtla is one step ahead, placing the
documentation at Documentation/tools/rtla/, using the same build
tools as kernel documentation. The idea is to move perf
documentation to the same scheme and then share the same makefiles.
rtla has a tarball target that the (old) RHEL8 uses. The tarball was
kept using a simple standalone makefile for compatibility. The
standalone makefile shares most of the code, e.g., flags, with
regular buildings.
The tarball method was set as deprecated. If necessary, we can make
a rtla tarball like perf, which includes the entire tools/build.
But this would also require changes in the user side (the directory
structure changes, and probably the deps to build the package).
Inspired on perf and objtool.
Link: https://lkml.kernel.org/r/57563abf2715d22515c0c54a87cff3849eca5d52.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build latency-collector, inheriting
the benefits of it. For example: Before this patch, a missing
tracefs/traceevents headers will result in fail like this:
~/linux/tools/tracing/latency $ make
cc -Wall -Wextra -g -O2 -o latency-collector latency-collector.c -lpthread
latency-collector.c:26:10: fatal error: tracefs.h: No such file or directory
26 | #include <tracefs.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:14: latency-collector] Error 1
Which is not that helpful. After this change it reports:
~/linux/tools/tracing/latency# make
Auto-detecting system features:
... libtraceevent: [ OFF ]
... libtracefs: [ OFF ]
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
Makefile.config:29: *** Please, check the errors above.. Stop.
This type of output is common across other tools in tools/ like perf
and objtool.
Link: https://lkml.kernel.org/r/872420b0880b11304e4ba144a0086c6478c5b469.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.
Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.
Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de