Load DMC for Xe2LPD. The value 0x8000 is the maximum payload size for
any Xe2LPD DMC firmware.
v2:
- s/XE2LPD_MAX_FW_SIZE/XE2LPD_DMC_MAX_FW_SIZE/. (Lucas)
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-8-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit 394b4b7df9 ("drm/i915/lnl: Add CDCLK table") and commit
3d3696c0fe ("drm/i915/lnl: Start using CDCLK through PLL") started
adding support for CDCLK programming support for Xe2LPD. One final piece
is missing, which is the programming necessary for changed in the ratio
between MDCLK and CDCLK. Let's do that now.
BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the
ratio between MDCLK and CDCLK changes. The updates must be done before
changing the CDCLK when decreasing the frequency; or after it when
increasing the frequency.
Ratio-related updates to MBUS_CTL also depend on the state of MBus
joining, so they are performed by either CDCLK change sequence or by
changes in MBus joining. Since one might happen independently of the
other, we need to make sure that both logics see the necessary state
values when programming that register. MBus joining logic needs to know
the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio
field of struct intel_dbuf_state.
For the CDCLK logic, we need to have something similar: we need to
propagate the status of MBus joining to struct intel_cdclk_state. Do
that by adding the field joined_mbus to struct intel_cdclk_config.
(Preferably, that field would be added to intel_cdclk_state, however
currently only intel_cdclk_config is passed down to the functions that
do the register programming. We might revisit this decision if we find
that refactoring the code to pass the whole intel_cdclk_state is worth
it.)
Bspec: 68864, 68868, 69090, 69482
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-7-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe2LPD always selects the CDCLK PLL as source for the MDCLK. Because of
that, the ratio between MDCLK and CDCLK is not be constant anymore. As
such, make sure to have the current ratio available in intel_dbuf_state
so that it can be used during dbuf programming.
Note that we write-lock the global state instead of serializing to a
hardware commit because a change in the ratio should be rather handled
in the CDCLK change sequence, which will need to take care of updating
the necessary registers in that case. We will implement that in upcoming
changes.
That said, changes in the MBus joining state should be handled by the
DBUF/MBUS logic, just like it is already done, but the logic will need
to know the ratio to properly update the registers.
v2:
- Make first sentence of commit message more intelligible. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-6-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
As of Xe2LPD, it is now possible to select the source of the MDCLK
as either the CD2XCLK or the CDCLK PLL.
Previous display IPs were hardcoded to use the CD2XCLK. For those, the
ratio between MDCLK and CDCLK remained constant, namely 2. For Xe2LPD,
when we select the CDCLK PLL as the source, the ratio will vary
according to the squashing configuration (since the cd2x divisor is
fixed for all supported configurations).
To help the transition to supporting changes in the ratio, extract the
function intel_dbuf_mdclk_cdclk_ratio_update() from the existing logic
and call it using 2 as hardcoded ratio. Upcoming changes will use that
function for updates in the ratio due to CDCLK changes.
Bspec: 50057, 69445, 49213, 68868
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-5-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It is no use computing the squash waveform if we are not going to use
it. Move the call to cdclk_squash_waveform() inside the block guarded by
HAS_CDCLK_SQUASH(dev_priv).
v2:
- Move "u16 waveform" declaration to inside the block where it is
initialized and used. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-4-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently, only Xe2LPD uses CDCLK PLL as the source of MDCLK and
previous display IPs use the CD2XCLK. There will be changes in code
paths common to those platforms that will rely on which source is being
used. As such, let's make that information explicit with the addition of
the predicate function mdclk_source_is_cdclk_pll().
Arguably, an enum could be created, but using a boolean should suffice
here, since we there are only two possible sources and the logic that
will rely on it will be very localized.
In order to get the code into a more consistent state, let's also take
this opportunity to hook the selection of CDCLK_CTL's "MDCLK Source
Select" to that new function. Even though currently only
MDCLK_SOURCE_SEL_CDCLK_PLL will be returned, having this extra logic is
arguably better than keeping stuff untied and prone to bugs.
v2:
- Extract mdclk_source_is_cdclk_pll() out of xe2lpd_mdclk_source_sel()
to make latter only about the register's field.
Bspec: 69090, 68861
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-3-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The CDCLK table is tied to Xe2LPD display and not to the platform. Let's
rename lnl_cdclk_table to xe2lpd_cdclk_table in order to reflect that.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312163639.172321-2-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In the RISC-V specification, the stimecmp register doesn't have a default
value. To prevent the timer interrupt from being triggered during timer
initialization, clear the timer interrupt by writing stimecmp with a
maximum value.
Fixes: 9f7a8ff639 ("RISC-V: Prefer sstc extension if available")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240306172330.255844-1-leyfoon.tan@starfivetech.com
This reverts commit 50e3ed0f93.
The SCTLR_EL1.WXN control forces execute-never when a page has write
permissions. While the idea of hardening such write/exec combinations is
good, with permissions indirection enabled (FEAT_PIE) this control
becomes RES0. FEAT_PIE introduces a slightly different form of WXN which
only has an effect when the base permission is RWX and the write is
toggled by the permission overlay (FEAT_POE, not yet supported by the
arm64 kernel). Revert the patch for now.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/ZfGESD3a91lxH367@arm.com
If CONFIG_X86_32=y, the section start address is defined to be
"LOAD_OFFSET + LOAD_PHYSICAL_ADDR", which is the same as
__START_KERNEL_map.
Unify it with the 64-bit definition to simplify the code.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240313075839.8321-5-richard.weiyang@gmail.com
In vmlinux.lds.S, we define LOAD_OFFSET conditionally to __PAGE_OFFSET
or __START_KERNEL_map. While __START_KERNEL_map is already defined to
the same value with the same condition.
So it is fine to define LOAD_OFFSET to __START_KERNEL_map directly.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240313075839.8321-4-richard.weiyang@gmail.com
When bringing a CPU online, some of the PMC and LBR related registers
are reset. The same is done when a CPU is taken offline although that
is unnecessary. This currently happens in the "cpu_dead" callback which
is also incorrect as the callback runs on a control CPU instead of the
one that is being taken offline. This also affects hibernation and
suspend to RAM on some platforms as reported in the link below.
Fixes: 21d59e3e2c ("perf/x86/amd/core: Detect PerfMonV2 support")
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/550a026764342cf7e5812680e3e2b91fe662b5ac.1706526029.git.sandipan.das@amd.com
The Revision Guide for AMD Family 19h Model 10-1Fh processors declares
Erratum 1452 which states that non-branch entries may erroneously be
recorded in the Last Branch Record (LBR) stack with the valid and
spec bits set.
Such entries can be recognized by inspecting bit 61 of the corresponding
LastBranchStackToIp register. This bit is currently reserved but if found
to be set, the associated branch entry should be discarded.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://bugzilla.kernel.org/attachment.cgi?id=305518
Link: https://lore.kernel.org/r/3ad2aa305f7396d41a40e3f054f740d464b16b7f.1706526029.git.sandipan.das@amd.com
lt9611uxc_connector_get_modes() propagates the return value of
drm_edid_connector_add_modes() but stores the int temporarily in an
unsigned int. Use the correct type.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ed97f4f036263cdc4f34330cef91214970f99a77.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
None of the callers of drm_panel_get_modes() expect it to return
negative error codes. Either they propagate the return value in their
struct drm_connector_helper_funcs .get_modes() hook (which is also not
supposed to return negative codes), or add it to other counts leading to
bogus values.
On the other hand, many of the struct drm_panel_funcs .get_modes() hooks
do return negative error codes, so handle them gracefully instead of
propagating further.
Return 0 for no modes, whatever the reason.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79f559b72d8c493940417304e222a4b04dfa19c4.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 870c7ad4a5 ("devlink: protect devlink->dev by the instance
lock") added devlink instance locking inside a loop that iterates over
all the registered devlink instances on the machine in the pre-doit
phase. This can lead to serialization of devlink commands over
different devlink instances.
For example: While the first devlink instance is executing firmware
flash, all commands to other devlink instances on the machine are
forced to wait until the first devlink finishes.
Therefore, in the pre-doit phase, take the devlink instance lock only
for the devlink instance the command is targeting. Devlink layer is
taking a reference on the devlink instance, ensuring the devlink->dev
pointer is valid. This reference taking was introduced by commit
a380687200 ("devlink: take device reference for devlink object").
Without this commit, it would not be safe to access devlink->dev
lockless.
Fixes: 870c7ad4a5 ("devlink: protect devlink->dev by the instance lock")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the class3270 structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-6-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of checking if rc is 0, check whether it is non-zero and return
early if so. The call to class_create() can fail, so add a check to it and
move it out of the mutex region.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-5-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the tape_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-4-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the vmlogrdr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-3-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the vmur_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-2-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the zcrypt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-1-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a very simple ARCH_HAS_DEBUG_VIRTUAL implementation.
For now errors are only reported for the following cases:
- Trying to translate a vmalloc or module address to a physical address
- Translating a supposed to be ZONE_DMA virtual address into a physical
address, and the resulting physical address is larger than two GiB
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma64() and friends to properly convert virtual to physical and
hysical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion and use new dma types and helper
functions to allow for type checking. This does not fix a bug since virtual
and physical address spaces are currently the same.
Tested-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion. This does not fix a bug since
virtual and physical address spaces are currently the same.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Only the last 12 bits of virtual / physical addresses are used when masking
with IDA_BLOCK_SIZE - 1. Given that the bits are the same regardless of
virtual or physical address, remove the virtual to physical address
conversion.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Adjust coding style, partially refactor code, and use kcalloc()
instead of kmalloc() to allocate an idaw array.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>