Commit graph

1,294,908 commits

Author SHA1 Message Date
Arnaldo Carvalho de Melo
21fdd8dd37 tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:

  d8b0f54650 ("wire up syscalls for statmount/listmount")
  5f42375904 ("LSM: wireup Linux Security Module syscalls")

Used in some architectures to create syscall tables.

This addresses this perf build warning:

  Warning: Kernel ABI header differences:
    diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h

Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-29 13:05:44 -03:00
Yonghong Song
ced33f2cfa docs/bpf: Improve documentation of 64-bit immediate instructions
For 64-bit immediate instruction, 'BPF_IMM | BPF_DW | BPF_LD' and
src_reg=[0-6], the current documentation describes the 64-bit
immediate is constructed by:

  imm64 = (next_imm << 32) | imm

But actually imm64 is only used when src_reg=0. For all other
variants (src_reg != 0), 'imm' and 'next_imm' have separate special
encoding requirement and imm64 cannot be easily used to describe
instruction semantics.

This patch clarifies that 64-bit immediate instructions use
two 32-bit immediate values instead of a 64-bit immediate value,
so later describing individual 64-bit immediate instructions
becomes less confusing.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/bpf/20240127194629.737589-1-yonghong.song@linux.dev
2024-01-29 16:54:33 +01:00
Alexander Tsoy
346f59d1e8 ALSA: usb-audio: Check presence of valid altsetting control
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29 16:46:01 +01:00
Menglong Dong
efaa47db92 bpf: Remove unused field "mod" in struct bpf_trampoline
It seems that the field "mod" in struct bpf_trampoline is not used
anywhere after the commit 31bf1dbccf ("bpf: Fix attaching
fentry/fexit/fmod_ret/lsm to modules"). So we can just remove it now.

Fixes: 31bf1dbccf ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Signed-off-by: Menglong Dong <dongmenglong.8@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240128055443.413291-1-dongmenglong.8@bytedance.com
2024-01-29 16:44:53 +01:00
Geliang Tang
f149d03f45 selftests/bpf: Drop return in bpf_testmod_exit
bpf_testmod_exit() does not need to have a return value (given the void),
so this patch drops this useless 'return' in it.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/5765b287ea088f0c820f2a834faf9b20fb2f8215.1706442113.git.tanggeliang@kylinos.cn
2024-01-29 16:41:29 +01:00
Pu Lehui
06a33d0248 riscv, bpf: Optimize bswap insns with Zbb support
Optimize bswap instructions by rev8 Zbb instruction conbined with srli
instruction. And Optimize 16-bit zero-extension with Zbb support.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-7-pulehui@huaweicloud.com
2024-01-29 16:25:33 +01:00
Pu Lehui
519fb722be riscv, bpf: Optimize sign-extention mov insns with Zbb support
Add 8-bit and 16-bit sign-extention wraper with Zbb support to optimize
sign-extension mov instructions.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-6-pulehui@huaweicloud.com
2024-01-29 16:25:33 +01:00
Pu Lehui
647b93f65d riscv, bpf: Add necessary Zbb instructions
Add necessary Zbb instructions introduced by [0] to reduce code size and
improve performance of RV64 JIT. Meanwhile, a runtime deteted helper is
added to check whether the CPU supports Zbb instructions.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://github.com/riscv/riscv-bitmanip/releases/download/1.0.0/bitmanip-1.0.0-38-g865e7a7.pdf [0]
Link: https://lore.kernel.org/bpf/20240115131235.2914289-5-pulehui@huaweicloud.com
2024-01-29 16:25:33 +01:00
Pu Lehui
361db44c3c riscv, bpf: Simplify sext and zext logics in branch instructions
There are many extension helpers in the current branch instructions, and
the implementation is a bit complicated. We simplify this logic through
two simple extension helpers with alternate register.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-4-pulehui@huaweicloud.com
2024-01-29 16:25:33 +01:00
Pu Lehui
914c7a5ff1 riscv, bpf: Unify 32-bit zero-extension to emit_zextw
For code unification, add emit_zextw wrapper to unify all the 32-bit
zero-extension operations.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-3-pulehui@huaweicloud.com
2024-01-29 16:25:33 +01:00
Pu Lehui
e33758f749 riscv, bpf: Unify 32-bit sign-extension to emit_sextw
For code unification, add emit_sextw wrapper to unify all the 32-bit
sign-extension operations.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-2-pulehui@huaweicloud.com
2024-01-29 16:25:32 +01:00
Andrii Nakryiko
ad57654053 libbpf: Fix faccessat() usage on Android
Android implementation of libc errors out with -EINVAL in faccessat() if
passed AT_EACCESS ([0]), this leads to ridiculous issue with libbpf
refusing to load /sys/kernel/btf/vmlinux on Androids ([1]). Fix by
detecting Android and redefining AT_EACCESS to 0, it's equivalent on
Android.

  [0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
  [1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250

Fixes: 6a4ab8869d ("libbpf: Fix the case of running as non-root with capabilities")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240126220944.2497665-1-andrii@kernel.org
2024-01-29 16:17:44 +01:00
Arnaldo Carvalho de Melo
29788f39a4 bpftool: Be more portable by using POSIX's basename()
musl libc had the basename() prototype in string.h, but this is a
glibc-ism, now they removed the _GNU_SOURCE bits in their devel distro,
Alpine Linux edge:

  https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7

So lets use the POSIX version, the whole rationale is spelled out at:

  https://gitlab.alpinelinux.org/alpine/aports/-/issues/15643

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/lkml/ZZhsPs00TI75RdAr@kernel.org
Link: https://lore.kernel.org/bpf/Zbe3NuOgaupvUcpF@kernel.org
2024-01-29 16:08:46 +01:00
Keith Busch
6d3c7fb17b nvme: use ctrl state accessor
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.

Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-29 07:02:50 -08:00
Dave Kleikamp
e42e29cc44 Revert "jfs: fix shift-out-of-bounds in dbJoin"
This reverts commit cca974daeb.

The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2024-01-29 08:45:10 -06:00
Florian Westphal
7ad269787b netfilter: ebtables: allow xtables-nft only builds
Same patch as previous one, but for ebtables.

To build a kernel that only supports ebtables-nft, the builtin tables
need to be disabled, i.e.:

CONFIG_BRIDGE_EBT_BROUTE=n
CONFIG_BRIDGE_EBT_T_FILTER=n
CONFIG_BRIDGE_EBT_T_NAT=n

The ebtables specific extensions can then be used nftables'
NFT_COMPAT interface.

Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:21 +01:00
Florian Westphal
a9525c7f62 netfilter: xtables: allow xtables-nft only builds
Add hidden IP(6)_NF_IPTABLES_LEGACY symbol.

When any of the "old" builtin tables are enabled the "old" iptables
interface will be supported.

To disable the old set/getsockopt interface the existing options
for the builtin tables need to be turned off:

CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_SECURITY is not set

Same for CONFIG_IP6_NF_ variants.

This allows to build a kernel that only supports ip(6)tables-nft
(iptables-over-nftables api).

In the future the _LEGACY symbol will become visible and the select
statements will be turned into 'depends on', but for now be on safe side
so "make oldconfig" won't break things.

Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:21 +01:00
Florian Westphal
4654467dc7 netfilter: arptables: allow xtables-nft only builds
Allows to build kernel that supports the arptables mangle target
via nftables' compat infra but without the arptables get/setsockopt
interface or the old arptables filter interpreter.

IOW, setting IP_NF_ARPFILTER=n will break arptables-legacy, but
arptables-nft will continue to work as long as nftables compat
support is enabled.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Phil Sutter <phil@nwl.cc>
2024-01-29 15:43:20 +01:00
Kunwu Chan
d5f9142fb9 ipvs: Simplify the allocation of ip_vs_conn slab caches
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Kunwu Chan
2ae6e9a03d netfilter: nf_conncount: Use KMEM_CACHE instead of kmem_cache_create()
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Pablo Neira Ayuso
a128885ace netfilter: nf_tables: pass flags to set backend selection routine
No need to refetch the flag from the netlink attribute, pass the
existing flags variable which already provide validated flags.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Phil Sutter
31bf508be6 netfilter: nf_tables: Implement table adoption support
Allow a new process to take ownership of a previously owned table,
useful mostly for firewall management services restarting or suspending
when idle.

By extending __NFT_TABLE_F_UPDATE, the on/off/on check in
nf_tables_updtable() also covers table adoption, although it is actually
not needed: Table adoption is irreversible because nf_tables_updtable()
rejects attempts to drop NFT_TABLE_F_OWNER so table->nlpid setting can
happen just once within the transaction.

If the transaction commences, table's nlpid and flags fields are already
set and no further action is required. If it aborts, the table returns
to orphaned state.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Phil Sutter
da5141bbe0 netfilter: nf_tables: Introduce NFT_TABLE_F_PERSIST
This companion flag to NFT_TABLE_F_OWNER requests the kernel to keep the
table around after the process has exited. It marks such table as
orphaned (by dropping OWNER flag but keeping PERSIST flag in place),
which opens it for other processes to manipulate. For the sake of
simplicity, PERSIST flag may not be altered though.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Phil Sutter
941988af57 netfilter: uapi: Document NFT_TABLE_F_OWNER flag
Add at least this one-liner describing the obvious.

Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
2024-01-29 15:43:20 +01:00
Jakub Kicinski
723de3ebef net: free altname using an RCU callback
We had to add another synchronize_rcu() in recent fix.
Bite the bullet and add an rcu_head to netdev_name_node,
free from RCU.

Note that name_node does not hold any reference on dev
to which it points, but there must be a synchronize_rcu()
on device removal path, so we should be fine.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 14:40:38 +00:00
Rafael J. Wysocki
54d94009cb thermal: gov_bang_bang: Fix possible cooling device state ping-pong
The current behavior of thermal_zone_trip_update() in the bang-bang
thermal governor may be problematic for trip points with 0 hysteresis,
because when the zone temperature reaches the trip temperature and
stays there, it will then cause the cooling device go "on" and "off"
alternately, which is not desirable.

Address this by requiring the zone temperature to actually fall below
trip->temperature - trip->hysteresis for the cooling device to go off.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-01-29 15:37:56 +01:00
Rafael J. Wysocki
f2675e588f thermal: gov_fair_share: Fix dependency on trip points ordering
The computation in the fair share governor's get_trip_level() function
currently works under the assumption that the temperature ordering of
trips[] in a thermal zone is ascending, which need not be the case.

However, get_trip_level() can be made work regardless of whether or not
the trips table is ordered by temperature in any way, so change it
accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-01-29 15:37:56 +01:00
Mario Limonciello
c92c108403 Revert "drm/amd/pm: fix the high voltage and temperature issue"
This reverts commit 5f38ac54e6.
This causes issues with rebooting and the 7800XT.

Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: stable@vger.kernel.org
Fixes: 5f38ac54e6 ("drm/amd/pm: fix the high voltage and temperature issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29 08:56:13 -05:00
David Howells
ca9ca1a5d5 netfs: Fix missing zero-length check in unbuffered write
Fix netfs_unbuffered_write_iter() to return immediately if
generic_write_checks() returns 0, indicating there's nothing to write.
Note that netfs_file_write_iter() already does this.

Also, whilst we're at it, put in checks for the size being zero before we
even take the locks.  Note that generic_write_checks() can still reduce the
size to zero, so we still need that check.

Without this, a warning similar to the following is logged to dmesg:

	netfs: Zero-sized write [R=1b6da]

and the syscall fails with EIO, e.g.:

	/sbin/ldconfig.real: Writing of cache extension data failed: Input/output error

This can be reproduced on 9p by:

	xfs_io -f -c 'pwrite 0 0' /xfstest.test/foo

Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Reported-by: Eric Van Hensbergen <ericvh@kernel.org>
Link: https://lore.kernel.org/r/ZbQUU6QKmIftKsmo@FV7GG9FTHL/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-3-dhowells@redhat.com
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc:  <v9fs@lists.linux.dev>
cc:  <linux_oss@crudebyte.com>
cc:  <netfs@lists.linux.dev>
cc:  <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-01-29 14:53:21 +01:00
Marc Dionne
2147caaac7 netfs: Fix i_dio_count leak on DIO read past i_size
If netfs_begin_read gets a NETFS_DIO_READ request that begins
past i_size, it won't perform any i/o and just return 0.  This
will leak an increment to i_dio_count that is done at the top
of the function.

This can cause subsequent buffered read requests to block
indefinitely, waiting for a non existing dio operation to complete.

Add a inode_dio_end() for the NETFS_DIO_READ case, before returning.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-2-dhowells@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc:  <linux-afs@lists.infradead.org>
cc:  <netfs@lists.linux.dev>
cc:  <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-01-29 14:53:18 +01:00
Geert Uytterhoeven
55cda67bf3 arm64: dts: renesas: r8a779g2: Add White Hawk Single support
The White Hawk Single board is a single-board integration of the Renesas
White Hawk CPU and Breakout board stack, based on the R-Car V4H ES2.0
(R8A779G2) SoC.

For now, the only visible differences compared to the board stack are:
  - The SoC is an updated version of R-Car V4H (R8A779G0),
  - The serial console uses an FT2232H instead of a CP2102 USB-UART
    bridge, with CTS/RTS wired.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/2b8d37949c17cca170c1d9e97f10a100b20c5cd9.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
7605e7e90b arm64: dts: renesas: Add Renesas R8A779G2 SoC support
Add support for the Renesas R-Car V4H ES2.0 (R8A779G2) SoC, which is an
updated version of the R-Car V4H (R8A779G0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/4f773dbb66af5da51d1e171424ec8f97ee933b36.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
874dca5d21 arm64: dts: renesas: white-hawk: Factor out common parts
Factor out the parts on the White Hawk BreakOut board that are also
present on the White Hawk Single board, so they can be reused when
introducing support for the latter.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/8c05b4d283b5d765fbc6f64cee9a247cded29409.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
b84bd2230a arm64: dts: renesas: white-hawk-cpu: Factor out common parts
Factor out the parts on the White Hawk CPU board that are also present
on the White Hawk Single board, so they can be reused when introducing
support for the latter.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/50676e7e9ac1c50ab450c030481f60ece4c3947e.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
a9baf0b42d arm64: dts: renesas: white-hawk: Add SoC name to top-level comment
The White Hawk CPU and BreakOut board DTS is specific to R-Car V4H.
Document it in the top-level comment.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/de81db7ca38c8f4737092bdac6891e9db4bb9bd6.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
1b940d036d arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards
The White Hawk CSI/DSI and RAVB/Ethernet(1000Base-T1) sub boards are not
specific to R-Car V4H.

Hence rename their DTS file names to drop the "r8a779g0-" prefix, and
remove any references to R-Car V4H.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f89613d0df04cfa6196f8797fe655cf7cec812de.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
48683d4a88 arm64: dts: renesas: white-hawk-cpu: Restore sort order
Alphabetical by node name.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f375293d6e21659ee30a86e2b46e4998a75ea3b5.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Geert Uytterhoeven
c90efc452a arm64: dts: renesas: r8a779g0: Add standalone White Hawk CPU support
The White Hawk CPU board can be used standalone, without connecting it
to the White Hawk BreakOut board.

Add a DTS file for supporting this use case.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/95ac53e7f2bc42402eb411ad7f64a66864a3de01.1706192990.git.geert+renesas@glider.be
2024-01-29 14:22:26 +01:00
Wolfram Sang
7eb30251e1 arm64: dts: renesas: ulcb-kf: Add node for GNSS
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-01-29 14:22:21 +01:00
Wolfram Sang
bb235b728b arm64: dts: renesas: ulcb-kf: Drop duplicate 3.3v regulators
Schematics say that all these 3.3v sources are driven by "D3.3V".
We have a regulator for it already in ulcb.dtsi.  Use it instead.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-01-29 14:21:54 +01:00
Maxime Ripard
4db102dcb0
Merge drm/drm-next into drm-misc-next
Kickstart 6.9 development cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-29 14:20:23 +01:00
Geert Uytterhoeven
c18327b36e dt-bindings: soc: renesas: Document R-Car V4H White Hawk Single
Document the compatible values for the Renesas R-Car V4H ES2.0
(R8A779G2) SoC and the Renesas White Hawk Single board.
The former is an updated version of R-Car V4H (R8A779G0).
The latter is a single-board integration of the Renesas White Hawk CPU
and Breakout board stack.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a44d990c962c8e0aac3b133eaa563f8c92b2ce29.1706192990.git.geert+renesas@glider.be
2024-01-29 14:12:54 +01:00
Tobias Schramm
9e1aa985d6 dt-bindings: nfc: ti,trf7970a: fix usage example
The TRF7970A is a SPI device, not I2C.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 13:02:07 +00:00
Min Li
1ddfecafab ptp: add FemtoClock3 Wireless as ptp hardware clock
The RENESAS FemtoClock3 Wireless is a high-performance jitter attenuator,
frequency translator, and clock synthesizer. The device is comprised of 3
digital PLLs (DPLL) to track CLKIN inputs and three independent low phase
noise fractional output dividers (FOD) that output low phase noise clocks.

FemtoClock3 supports one Time Synchronization (Time Sync) channel to enable
an external processor to control the phase and frequency of the Time Sync
channel and to take phase measurements using the TDC. Intended applications
are synchronization using the precision time protocol (PTP) and
synchronization with 0.5 Hz and 1 Hz signals from GNSS.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 13:00:23 +00:00
Min Li
ea1cc3ee34 ptp: introduce PTP_CLOCK_EXTOFF event for the measured external offset
This change is for the PHC devices that can measure the phase offset
between PHC signal and the external signal, such as the 1PPS signal of
GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to
the existing ptp_extts_event so that application such as ts2phc can
poll the external offset the same way as extts. Hence, ts2phc can use
the offset to achieve the alignment between PHC and the external signal
by the help of either SW or HW filters.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 13:00:23 +00:00
David S. Miller
cf8e51ef51 Merge branch 'net-module-description'
Breno Leitao says:

====================
Fix MODULE_DESCRIPTION() for net (p3)

There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:

        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o
        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o
        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o

This part3 of the patchset focus on the missing ethernet drivers, which
is now warning free. This also fixes net/pcs and ieee802154.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:12:51 +00:00
Breno Leitao
d06aa0eb0a net: fill in MODULE_DESCRIPTION()s for arcnet
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to arcnet module.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:12:51 +00:00
Breno Leitao
6aa89bf8ac net: fill in MODULE_DESCRIPTION()s for ieee802154
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to ieee802154 modules.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:12:51 +00:00
Breno Leitao
be884c15de net: fill in MODULE_DESCRIPTION()s for PCS drivers
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Lynx, XPCS and LynxI PCS drivers.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:12:51 +00:00
Breno Leitao
ad979679d6 net: fill in MODULE_DESCRIPTION()s for ec_bhf
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-29 12:12:51 +00:00