Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.
But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also print out the data_opts, so that we can see what specifically is
being done to an extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.
This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmWsdg4ACgkQE6szbY3K
bnZbig/9ESwBSIpxRkPW7oD6pjolGkrk2AU2sgKnUxCGMitYxPUpjY8HG2LpYFls
vJSJ0ZPoIUqnbIXLhrju6weJAfERrdyr0s1Pzpu4qKLqmjgTAk1bnv5WJD5PW24+
O903uBwop1oacDgFH5J5EiOIVgj9rUf4/5MFjB2OhiPNvurHrYh9iLWutIQCwYG5
979mSYtfPoXoq5ANXrfNJhOlO2GsIItA79YJKDHo4QY+xlnayw6EAIErOmx7POIV
z/X9gf10UroaxjW8zDXICz4c6EGhVDaPKgxbfm/jlS+zkzgBgEZSZjPbo0vkklYk
xeJjiKEDilZEfjJbHweryU9vtDK3lqCVfufbviIqchkBD4PZ9taYya/SwSfBAVZY
6qaSOtSePOasuA8Jki81p+4RzWdMmDftxeBbi1scrWizUaVlGqY719YbaurnZuh/
dOn4JpBFsL54q4qfFgbu+UFVI8Jr9Lo4FN7JgY/+f4Ju8BDK+u4Dsfw63arYGe73
VA82CY/5SdjSB9AHrGzV3FU6YJqaVK4NM1t0EmloafoT0hOVsDufEkuMXPh4bMiM
ONSgz+ONqWE2MEpozd1xEVL7oxXd7SZLYfvSlJRD3u9e0Kg4zzFeFNKEpcve1G75
RHFfWGpFHtjNhfKOaZtJXhxIQ6YxB56FmSOSXXY+BjjqHzjPlUY=
=jxxB
-----END PGP SIGNATURE-----
Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs
Pull header fix from Kent Overstreet:
"Just one small fixup for the RT build"
* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
spinlock: Fix failing build for PREEMPT_RT
idpf registers multiple netdevs (virtual ports) for one PCI function,
but it does not provide a way for userspace to distinguish them with
sysfs attributes. Per Documentation/ABI/testing/sysfs-class-net, it is
a bug not to set dev_port for independent ports on the same PCI bus,
device and function.
Without dev_port set, systemd-udevd's default naming policy attempts
to assign the same name ("ens2f0") to all four idpf netdevs on my test
system and obviously fails, leaving three of them with the initial
eth<N> name.
With this patch, systemd-udevd is able to assign unique names to the
netdevs (e.g. "ens2f0", "ens2f0d1", "ens2f0d2", "ens2f0d3").
The Intel-provided out-of-tree idpf driver already sets dev_port. In
this patch I chose to do it in the same place in the idpf_cfg_netdev
function.
Fixes: 0fe45467a1 ("idpf: add create vport and netdev configuration")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.
Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue
In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.
v3: - make sk_busy_loop_end() nicer (Willem)
v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.
This tweaks the reflink path to take extents btree locks in the right
order.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.
This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we added logging in the write path to ensure that any
unexpected errors getting reported to userspace have a log message; but
BCH_WRITE_ALLOC_NOWAIT is a special case, it's used for promotes where
errors are expected and not reported out to userspace - so we need to
silence those.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
In sisfb_check_var(), var->pixclock is used as a divisor to caculate
drate before it is checked against zero. Fix this by checking it
at the beginning.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
Although pixclock is checked in savagefb_decode_var(), but it is not
checked properly in savagefb_probe(). Fix this by checking whether
pixclock is zero in the function savagefb_check_var() before
info->var.pixclock is used as the divisor.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7824
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The irq-gpios description misleading, apparently saying that driving the
IRQ GPIO resets the device, which is even more puzzling as there is a reset
GPIO as well.
In reality the IRQ pin can be driven during the reset sequence to configure
the client address, as it becomes clear after checking both the datasheet
and the driver code. Improve the text to clarify that.
Also rephrase to remove reference to the driver, which is not appropriate
in the bindings.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240102081934.11293-1-luca.ceresoli@bootlin.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmWsTxUACgkQiiy9cAdy
T1GrcwwAl6fLD+A6r7GHFQ7LiA7KxXhQrnsdOibtWH0QRPqaiiNq2ctLg9+6pM16
vuTqsLF/sglJyjm1X5qP+xne2GFS5o7y6Vnpsj0cxoogt6I9f+q/uPrdIafJL9or
N2RaWvKINuiKpHoz3jwrnDTjhvWGrc95tYKKUBRvfQF94gWQbBfLjEBP7KbU14BL
jNJ+Zi4ZvEn1ITZNdiE8cqquCQuVG+lrQuqhzn9d9tDTU7rhkOan3jE7yyJPVSce
4HqtHvxnWUvOfNUyp8/bGYQhkTWEh2vy2Jo+mIPSwzwj0xSxYl3SITWo8F2mIV3U
MY12FQlJLzkUhkSj0oOgkMltOe35IjPEDgBCRvjj7qm33FbCparIKLs1lx8rfghj
pwzbgG3OX8yB3bIyyTmVRYl31uztN0RehYas8g4KPbVcF7w9HjHjsiemxBDTnOkb
A9jxfwan8RJcO+e4e4OG7+AKMZxQt1dwf99Bo2nWhVQmV/aYJyswBCGp9hGBfrB4
0PGp7zlz
=vwnz
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
"Various smb client fixes, including multichannel and for SMB3.1.1
POSIX extensions:
- debugging improvement (display start time for stats)
- two reparse point handling fixes
- various multichannel improvements and fixes
- SMB3.1.1 POSIX extensions open/create parsing fix
- retry (reconnect) improvement including new retrans mount parm, and
handling of two additional return codes that need to be retried on
- two minor cleanup patches and another to remove duplicate query
info code
- two documentation cleanup, and one reviewer email correction"
* tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update iface_last_update on each query-and-update
cifs: handle servers that still advertise multichannel after disabling
cifs: new mount option called retrans
cifs: reschedule periodic query for server interfaces
smb: client: don't clobber ->i_rdev from cached reparse points
smb: client: get rid of smb311_posix_query_path_info()
smb: client: parse owner/group when creating reparse points
smb: client: fix parsing of SMB3.1.1 POSIX create context
cifs: update known bugs mentioned in kernel docs for cifs
cifs: new nt status codes from MS-SMB2
cifs: pick channel for tcon and tdis
cifs: open_cached_dir should not rely on primary channel
smb3: minor documentation updates
Update MAINTAINERS email address
cifs: minor comment cleanup
smb3: show beginning time for per share stats
cifs: remove redundant variable tcon_exist
Updates to the device_attr_show semantic patch to reflect the new
guidelines of the Linux kernel documentation.
The problem was identified by Li Zhijian <lizhijian@fujitsu.com>, who
proposed an initial fix.
-----BEGIN PGP SIGNATURE-----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=l440
-----END PGP SIGNATURE-----
Merge tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Updates to the device_attr_show semantic patch to reflect the new
guidelines of the Linux kernel documentation.
The problem was identified by Li Zhijian <lizhijian@fujitsu.com>, who
proposed an initial fix"
* tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: device_attr_show: simplify patch case
coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replacing the final expression argument by ... allows the format
string to have multiple arguments.
It also has the advantage of allowing the change to be recognized as
a change in a single statement, thus avoiding adding unneeded braces.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>