Commit graph

740,858 commits

Author SHA1 Message Date
Kim Phillips
ffd3d18c20 perf tools: Add ARM Statistical Profiling Extensions (SPE) support
'perf record' and 'perf report --dump-raw-trace' supported in this
release.

Example usage:

 # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000
 # perf report --dump-raw-trace

Note that the perf.data file is portable, so the report can be run on
another architecture host if necessary.

Output will contain raw SPE data and its textual representation, such
as:

0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000  offset: 0  ref: 0x1891ad0e  idx: 1  tid: 2227  cpu: 1
.
. ... ARM SPE data: size 2097152 bytes
.  00000000:  49 00                                           LD
.  00000002:  b2 c0 3b 29 0f 00 00 ff ff                      VA 0xffff00000f293bc0
.  0000000b:  b3 c0 eb 24 fb 00 00 00 80                      PA 0xfb24ebc0 ns=1
.  00000014:  9a 00 00                                        LAT 0 XLAT
.  00000017:  42 16                                           EV RETIRED L1D-ACCESS TLB-ACCESS
.  00000019:  b0 00 c4 15 08 00 00 ff ff                      PC 0xff00000815c400 el3 ns=1
.  00000022:  98 00 00                                        LAT 0 TOT
.  00000025:  71 36 6c 21 2c 09 00 00 00                      TS 39395093558
.  0000002e:  49 00                                           LD
.  00000030:  b2 80 3c 29 0f 00 00 ff ff                      VA 0xffff00000f293c80
.  00000039:  b3 80 ec 24 fb 00 00 00 80                      PA 0xfb24ec80 ns=1
.  00000042:  9a 00 00                                        LAT 0 XLAT
.  00000045:  42 16                                           EV RETIRED L1D-ACCESS TLB-ACCESS
.  00000047:  b0 f4 11 16 08 00 00 ff ff                      PC 0xff0000081611f4 el3 ns=1
.  00000050:  98 00 00                                        LAT 0 TOT
.  00000053:  71 36 6c 21 2c 09 00 00 00                      TS 39395093558
.  0000005c:  48 00                                           INSN-OTHER
.  0000005e:  42 02                                           EV RETIRED
.  00000060:  b0 2c ef 7f 08 00 00 ff ff                      PC 0xff0000087fef2c el3 ns=1
.  00000069:  98 00 00                                        LAT 0 TOT
.  0000006c:  71 d1 6f 21 2c 09 00 00 00                      TS 39395094481
...

Other release notes:

- applies to acme's perf/{core,urgent} branches, likely elsewhere

- Report is self-contained within the tool.
  Record requires enabling the kernel SPE driver by
  setting CONFIG_ARM_SPE_PMU.

- The intel-bts implementation was used as a starting point; its
  min/default/max buffer sizes and power of 2 pages granularity need to be
  revisited for ARM SPE

- Recording across multiple SPE clusters/domains not supported

- Snapshot support (record -S), and conversion to native perf events
  (e.g., via 'perf inject --itrace'), are also not supported

- Technically both cs-etm and spe can be used simultaneously, however
  disabled for simplicity in this release

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:23:31 -03:00
Steven Rostedt (VMware)
d777f8de99 tools lib traceevent: Fix get_field_str() for dynamic strings
If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.

Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:23:21 -03:00
Taeung Song
806efaed3c tools lib traceevent: Fix missing break in FALSE case of pevent_filter_clear_trivial()
Currently the FILTER_TRIVIAL_FALSE case has a missing break statement,
if the trivial type is FALSE, it will also run into the TRUE case, and
always be skipped as the TRUE statement will continue the loop on the
inverse condition of the FALSE statement.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org
Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:57 -03:00
Michael Sartain
6d36ce2616 tools lib traceevent: Add UL suffix to MISSING_EVENTS
Add UL suffix to MISSING_EVENTS since ints shouldn't be left shifted by 31.

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20171016165542.13038-4-mikesart@fastmail.com
Link: http://lkml.kernel.org/r/20180112004822.829533885@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:49 -03:00
Federico Vaga
67dfc376f3 tools lib traceevent: Use asprintf when possible
It makes the code clearer and less error prone.

clearer:
- less code
- the code is now using the same format to create strings dynamically

less error prone:
- no magic number +2 +9 +5 to compute the size
- no copy&paste of the strings to compute the size and to concatenate

The function `asprintf` is not POSIX standard but the program
was already using it. Later it can be decided to use only POSIX
functions, then we can easly replace all the `asprintf(3)` with a local
implementation of that function.

Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it
Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:19 -03:00
Steven Rostedt (VMware)
e877372880 tools lib traceevent: Show contents (in hex) of data of unrecognized type records
When a record has an unrecognized type, an error message is reported,
but it would also be helpful to see the contents of that record. At
least show what it is in hex, instead of just showing a blank line.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:13 -03:00
Steven Rostedt (VMware)
37db96bb49 tools lib traceevent: Handle new pointer processing of bprint strings
The Linux kernel printf() has some extended use cases that dereference
the pointer. This is dangerouse for tracing because the pointer that is
dereferenced can change or even be unmapped. It also causes issues when
the trace data is extracted, because user space does not have access to
the contents of the pointer even if it still exists.

To handle this, the kernel was updated to process these dereferenced
pointers at the time they are recorded, and not post processed. Now they
exist in the tracing buffer, and no dereference is needed at the time of
reading the trace.

The event parsing library needs to handle this new case.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:08 -03:00
Steven Rostedt (VMware)
38d70b7ca1 tools lib traceevent: Simplify pointer print logic and fix %pF
When processing %pX in pretty_print(), simplify the logic slightly by
incrementing the ptr to the format string if isalnum(ptr[1]) is true.
This follows the logic a bit more closely to what is in the kernel.

Also, this fixes a small bug where %pF was not giving the offset of the
function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:22:03 -03:00
Jan Kiszka
d63444739b tools lib traceevent: Print value of unknown symbolic fields
Aligns trace-cmd with the behavior of the kernel.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004822.118332436@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:57 -03:00
Steven Rostedt (VMware)
3df76c9a81 tools lib traceevent: Show value of flags that have not been parsed
If the value contains bits that are not defined by print_flags() helper,
then show the remaining bits. This aligns with the functionality of the
kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/e60c889f-55e7-4ee8-0e50-151e435ffd8c@siemens.com
Link: http://lkml.kernel.org/r/20180112004821.976225232@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:45 -03:00
Michael Sartain
952a99ccfa tools lib traceevent: Fix bad force_token escape sequence
Older kernels have a bug that creates invalid symbols. event-parse.c
handles them by replacing them with a "%s" token. But the fix included
an extra backslash, and "\%s" was added incorrectly.

Signed-off-by: Michael Sartain <mikesart@fastmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004821.827168881@goodmis.org
Link: http://lkml.kernel.org/r/d320000d37c10ce0912851e1fb78d1e0c946bcd9.1497486273.git.mikesart@fastmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-17 10:21:39 -03:00
Christoffer Dall
0482b50546 arm64: mm: Add additional parameter to uaccess_ttbr0_disable
Add an extra temporary register parameter to uaccess_ttbr0_disable which
is about to be required for arm64 PAN support.

This patch doesn't introduce any functional change but ensures that the
kernel compiles once the KVM/ARM tree is merged with the arm64 tree by
ensuring a trivially mergable conflict with commit
6b88a32c7a
("arm64: kpti: Fix the interaction between ASID switching and software PAN").

Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2018-01-17 13:57:49 +01:00
Arnd Bergmann
2c957902b1 microblaze: fix iounmap prototype
The missing 'volatile' keyword on the iounmap argument leads to lots of
harmless warnings in an allmodconfig build:

sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-17 13:34:35 +01:00
Arnd Bergmann
71e7673dad microblaze: fix endian handling
Building an allmodconfig kernel fails horribly because of
endian mismatch. It turns out that the -mlittle-endian
switch was not honored at all as we were using the wrong
Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS.
Finally, the linker flags did not get set right.

This addresses all three of those issues, which now lets
me build both big-endian and little-endian kernels for
testing.

Fixes: 428dbf156c ("arch: change default endian for microblaze")
Fixes: 206d3642d8 ("arch/microblaze: add choice for endianness and update Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-17 13:34:28 +01:00
Michal Suchanek
1b689a95ce powerpc/pseries: include linux/types.h in asm/hvcall.h
Commit 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h

This breaks hvcall.h users that do not include the header themselves.

Fixes: 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17 23:30:46 +11:00
Michael Ellerman
236003e6b5 powerpc/64s: Allow control of RFI flush via debugfs
Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.

eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
    1
    $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
    $ cat /sys/kernel/debug/powerpc/rfi_flush
    0

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
2018-01-17 23:30:21 +11:00
Michael Ellerman
fd6e440f20 powerpc/64s: Wire up cpu_show_meltdown()
The recent commit 87590ce6e3 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:

  /sys/devices/system/cpu/vulnerabilities/meltdown

This commit wires up that file for 64-bit Book3S powerpc.

For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17 23:30:20 +11:00
Sudeep Holla
343a8d17fa cpufreq: scpi: remove arm_big_little dependency
The dependency on physical_package_id from the topology to get the
cluster identifier is wrong. The concept of cluster used in ARM topology
is unfortunately not well defined in the architecture, we should avoid
using it. Further the frequency domain need not be mapped to so called
"clusters" one to one.

SCPI already provides means to obtain the frequency domain id from the
device tree. In order to support some new topologies(e.g. DSU which
contains 2 frequency domains within the physical cluster), pseudo
clusters are created to make this driver work which is wrong again.

In order to solve those issues and also remove dependency of topological
physical id for frequency domain, this patch removes the arm_big_little
dependency from scpi driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:59:33 +01:00
Sudeep Holla
dff4113d5e drivers: psci: remove cluster terminology and dependency on physical_package_id
Since the definition of the term "cluster" is not well defined in the
architecture, we should avoid using it. Also the physical package id
is currently mapped to so called "clusters" in ARM/ARM64 platforms which
is already argumentative.

Currently PSCI checker uses the physical package id assuming that CPU
power domains map to "clusters" and the physical package id in the code
as it stands also maps to cluster boundaries. It does that trying to
test "cluster" idle states to its best. However the CPU power domain
often but not always maps directly to the processor topology.

This patch removes the dependency on physical_package_id from the topology
in this PSCI checker. Also it replaces all the occurences of clusters to
cpu_groups which is derived from core_sibling_mask and may not directly
map to physical "cluster".

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:59:33 +01:00
Luis de Bethencourt
01857cf774 powercap: intel_rapl: Fix trailing semicolon
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:56:24 +01:00
Sinan Kaya
90fd94e4ab ACPI/PCI: pci_link: reduce verbosity when IRQ is enabled
When ACPI Link object is enabled, the message is printed with a warning
prefix. Some test tools are capturing warning and test error types as
errors. Let's reduce the verbosity of success case.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:53:04 +01:00
Geert Uytterhoeven
1131b0a4af dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
The current (empty) system sleep callbacks rely on the PM core to force
a runtime resume to reinitialize the DMAC registers during system
resume.  Without a reinitialization, e.g. SCIF DMA will hang silently
after a system resume on R-Car Gen3.

Make this explicit by using pm_runtime_force_{suspend,resume}() as the
system sleep callbacks instead.  Use SET_LATE_SYSTEM_SLEEP_PM_OPS() as
DMA engines must be initialized before all DMA slave devices.

Fixes: 17218e0092 "PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:46:18 +01:00
Ulf Hansson
617fcb6730 PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
The pm_runtime_force_suspend|resume() helpers currently requires the device
to at some level (PM domain, bus, etc), have the ->runtime_suspend|resume()
callbacks assigned for it, else -ENOSYS is returned as an error.

However, there are no reason for this requirement, so let's simply remove
it by allowing these callbacks to be NULL.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:42:49 +01:00
Kyungsik Lee
8ffdfe35b8 PM / hibernate: Drop unused parameter of enough_swap
Parameter flags is no longer used, remove it.

Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-17 12:41:22 +01:00
Adrian Hunter
81b14543ac mmc: sdhci: Rework sdhci_enable_irq_wakeups()
In preparation for adding more conditions for whether IRQ wakeup is
enabled, rework sdhci_enable_irq_wakeups() so that needed bits are added
instead of adding them all and then removing the unneeded bits.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-17 12:30:43 +01:00
Adrian Hunter
58e79b6075 mmc: sdhci: Handle failure of enable_irq_wake()
Now that sdhci_enable_irq_wakeups() is a local function, change it to
return whether the IRQ wakeup was successfully enabled. This is in
preparation for adding more conditions for whether IRQ wakeup is enabled.

Note it is assumed, for SDHCI devices, that suspend is more important than
wakeup, so we continue to suspend regardless.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-17 12:30:43 +01:00
Adrian Hunter
551d6bde46 mmc: sdhci: Stop exporting sdhci_enable_irq_wakeups()
Now that it is not being used by any drivers, stop exporting it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-17 12:30:43 +01:00
Adrian Hunter
e92cc35d62 mmc: sdhci-pci: Use device wakeup capability to determine MMC_PM_WAKE_SDIO_IRQ capability
PCI and ACPI determine if a device is wakeup capable, so use that to
determine the MMC_PM_WAKE_SDIO_IRQ capability correctly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-17 12:30:43 +01:00
Adrian Hunter
5c3c6126b6 mmc: sdhci-pci: Stop calling sdhci_enable_irq_wakeups()
sdhci_enable_irq_wakeups() is already called by sdhci_suspend_host() so
sdhci-pci should not need to call it. However sdhci_suspend_host() only
calls it if wakeups are enabled, and sdhci-pci does not enable them until
after calling sdhci_suspend_host(). So move the calls to
sdhci_pci_init_wakeup() before calling sdhci_suspend_host(), and
stop calling sdhci_enable_irq_wakeups(). That results in some
simplification because sdhci_pci_suspend_host() and
__sdhci_pci_suspend_host() no longer need to be separate functions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-17 12:30:43 +01:00
David Howells
e1e871aff3 Expand INIT_STRUCT_PID and remove
Expand INIT_STRUCT_PID in the single place that uses it and then remove it.
There doesn't seem any point in the macro.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17 11:30:16 +00:00
David Howells
3678e2fcc2 Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove
There doesn't seem to be any need to have the INIT_SIGNALS and INIT_SIGHAND
macros, so expand them in their single places of use and remove them.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17 11:30:16 +00:00
David Howells
4e7e3adbba Expand various INIT_* macros and remove
Expand various INIT_* macros into the single places they're used in
init/init_task.c and remove them.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17 11:30:16 +00:00
David Howells
d11ed3ab31 Expand INIT_TASK() in init/init_task.c and remove
It's no longer necessary to have an INIT_TASK() macro, and this can be
expanded into the one place it is now used and removed.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-17 11:30:16 +00:00
Colin Ian King
fb2fcaeaad
ASoC: Intel: remove second duplicated assignment to pointer 'res'
The second assignment to res is identical to the previous assignment
so it is redundant and can be removed.

Cleans up clang warning:
sound/soc/intel/skylake/skl-topology.c:191:25: warning: Value stored to
'res' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-17 11:21:53 +00:00
Kailang Yang
1b6832be1b ALSA: hda/realtek - update ALC215 depop optimize
Add ALC215 its own depop functions for alc_init and alc_shutup.
Assign it to ALC225 usage.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-17 12:14:35 +01:00
Kailang Yang
c2b691ee35 ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289
This patch will enable headset mode for ALC215/ALC285/ALC289 platform.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-17 12:14:21 +01:00
Thomas Gleixner
45d55e7bac x86/apic/vector: Fix off by one in error path
Keith reported the following warning:

WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120
  x86_vector_free_irqs+0xa1/0x180
  x86_vector_alloc_irqs+0x1e4/0x3a0
  msi_domain_alloc+0x62/0x130

The reason for this is that if the vector allocation fails the error
handling code tries to free the failed vector as well, which causes the
above imbalance warning to trigger.

Adjust the error path to handle this correctly.

Fixes: b5dc8e6c21 ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors")
Reported-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Keith Busch <keith.busch@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos
2018-01-17 12:11:36 +01:00
Thomas Gleixner
d479244173 x86/intel_rdt/cqm: Prevent use after free
intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then
proceeds accessing it.

 BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80
 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195
 find_first_bit+0x1f/0x80
 has_busy_rmid+0x47/0x70
 intel_rdt_offline_cpu+0x4b4/0x510

 Freed by task 195:
 kfree+0x94/0x1a0
 intel_rdt_offline_cpu+0x17d/0x510

Do the teardown first and then free memory.

Fixes: 24247aeeab ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Peter Zilstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: "Roderick W. Smith" <rod.smith@canonical.com>
Cc: 1733662@bugs.launchpad.net
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161957510.2366@nanos
2018-01-17 11:56:47 +01:00
Andi Kleen
6cfb521ac0 module: Add retpoline tag to VERMAGIC
Add a marker for retpoline to the module VERMAGIC. This catches the case
when a non RETPOLINE compiled module gets loaded into a retpoline kernel,
making it insecure.

It doesn't handle the case when retpoline has been runtime disabled.  Even
in this case the match of the retcompile status will be enforced.  This
implies that even with retpoline run time disabled all modules loaded need
to be recompiled.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: rusty@rustcorp.com.au
Cc: arjan.van.de.ven@intel.com
Cc: jeyu@kernel.org
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20180116205228.4890-1-andi@firstfloor.org
2018-01-17 11:35:14 +01:00
Maarten Lankhorst
3f5b933e60 drm/i915: Do not WARN_ON with small framebuffers.
It's perfectly legal to create a fb with stride < 512, and one of
the kms_plane_scaling subtests creates a very small fb.

Downgrade the WARN_ON to a simple check check, and because this
function is potentially called on every atomic update/pageflip,
downgrade the other WARN_ON to a WARN_ON_ONCE, and do the right
thing here.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155331.75175-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-01-17 10:14:01 +01:00
Hans de Goede
341a0ffcea drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
All Kconfig menu menu entries should have a depends on MENU_OPTION, the
menu stops after the first Kconfig entry without this depends on.

Since the PANEL_ORIENTATION_QUIRKS option is also used outside of DRM,
it deliberately does not have a depends on DRM, but this causes all
items after it to show as separate items rather then under the DRM
menuconfig.

This commit moves PANEL_ORIENTATION_QUIRKS to the end of the drm Kconfig
file, grouping it with DRM_LIB_RANDOM which also does not depend on DRM,
fixing the DRM menuconfig.

Fixes: 404d1a3edc ("drm: Add panel orientation quirks, v6.")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117081032.6411-1-hdegoede@redhat.com
2018-01-17 10:10:18 +01:00
Woody Suwalski
2b0bc68ccc drm/vmwgfx: Fix a boot time warning
The 4.15 vmwgfx driver shows a warning during boot.
It is caused by a mismatch between the result of vmw_enable_vblank()
and what the drm_atomic_helper expects.

Signed-off by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-01-17 09:09:27 +01:00
Colin Ian King
40a3c9db08 gpiolib: remove redundant initialization of pointer desc
The initialized value stored in pointer desc is never read as it
is updated in the first executable statement in the function.
This is therefore redundant and can be removed.

Cleans up clang warning:
drivers/gpio/gpiolib.c:3710:20: warning: Value stored to 'desc'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:16 +01:00
Linus Walleij
605f2d34ea gpio: of: Fix NPE from OF flags
Some calls to of_get_named_gpio() calls sets the flags
argument to NULL because they are not interested in the
flags. This caused a null pointer exception since we were
unconditionally using these flags. Fix it.

Fixes: 6a537d4846 ("gpio: of: Support regulator nonstandard GPIO properties")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:16 +01:00
Markus Elfring
0f7192318b gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe()
The local variable "irq" will eventually be set to an appropriate value
a bit later. Thus omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:16 +01:00
Markus Elfring
757ad058da gpio: stmpe: Move an assignment in stmpe_gpio_probe()
Move the assignment for the local variable "irq" so that its setting
will only be performed directly before it is checked by this function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:15 +01:00
Markus Elfring
64fec0bcea gpio: stmpe: Improve a size determination in stmpe_gpio_probe()
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:15 +01:00
Markus Elfring
0d83a5eb65 gpio: stmpe: Use seq_putc() in stmpe_dbg_show()
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:15 +01:00
Linus Walleij
7d18f0a14a gpio: No NULL owner
Sometimes a GPIO is fetched with NULL as parent device, and
that is just fine. So under these circumstances, avoid using
dev_name() to provide a name for the GPIO line.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:14 +01:00
Patrice Chotard
b888fb6f2a gpio: stmpe: i2c transfer are forbiden in atomic context
Move the workaround from stmpe_gpio_irq_unmask() which is executed
in atomic context to stmpe_gpio_irq_sync_unlock() which is not.

It fixes the following issue:

[    1.500000] BUG: scheduling while atomic: swapper/1/0x00000002
[    1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28
[    1.520000] Hardware name: STM32 (Device Tree Support)
[    1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc)
[    1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58)
[    1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2)
[    1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64)
[    1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164)
[    1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc)
[    1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe)
[    1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148)
[    1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70)
[    1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e)
[    1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a)
[    1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24)
[    1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24)
[    1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22)
[    1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78)
[    1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c)
[    1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8)
[    1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a)
[    1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a)
[    1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60)
[    1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54)
[    1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c)
[    1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe)
[    1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8)
[    1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c)
[    1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46)
[    1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124)
[    1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a)
[    1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8)
[    1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134)
[    1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c)
[    1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c)

Cc: stable@vger.kernel.org
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-17 07:44:14 +01:00