When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max_channel_switch_time field in struct wiphy_nan_capa was documented
as being in milliseconds, but it is actually in microseconds as defined
in the Wi-Fi Aware specification and as indicated in the nl80211
NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME attribute.
Fix the documentation to say microseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504121734.d0a0152f7d8c.I47e5c91f7ead4f8006fb13f9194d95a55cf9c398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_sigpool is no longer used. It existed only as a workaround for
issues in the design of the crypto_ahash API, which have been avoided by
switching to the much easier-to-use library APIs instead. Remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-6-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since tcp-ao now uses the crypto library API instead of crypto_ahash,
and MACs and keys now have a statically-known maximum size, many tcp-ao
functions can no longer fail. Propagate this change up into the return
types of various functions.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-5-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
qstats_overlimit_inc() is only used to increment per cpu overlimits.
It can use this_cpu_inc() to avoid this_cpu_ptr() extra cost
and avoid potential store tearing.
Change qstats_overlimit_inc() name and its argument type.
Also add a WRITE_ONCE() in qdisc_qstats_overlimit() to prevent
store tearing.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-91 (-91)
Function old new delta
tcf_skbmod_act 772 764 -8
tcf_police_act 733 725 -8
tcf_gate_act 318 310 -8
tcf_pedit_act 1295 1284 -11
tcf_mirred_to_dev 1126 1114 -12
tcf_ife_act 1077 1061 -16
tcf_mirred_act 1324 1296 -28
Total: Before=24274627, After=24274536, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260428070919.3109557-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit db359fccf2 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmnwhAAACgkQ1w0aZmrP
KyGSsxAAh1gE5UmUum0Q9x0K0a3C+Vh07c2YRw4zuI6sy0xh0W0ZQongj5p5QQUA
dL8b9pAZkV0Kr0WKhOTDvz5HhUFNWH0I/5hppwJ94Swx0PcEq4P+PZ+8eEYH7jfp
7bxSJu4vsjzGxn4qP6lzI221ICDsiifQisDE1+J0HyNyfV0Qr9oUIkW3usxiJsnP
IsIMp/zk/9PNC+IOSlQCEwl7tO/86p5g1XyCOP/WUCDa2DfpfBTPWAueMTTacN8r
Wgk+Butf6xJe7OfteGMJ07kg2oyqUr4pFiwoKog+MxV0EDQCQgm15t10AtYJl4D9
IIHVBIw4e7MgwlS0P/F5Vhb860U+gguaGuwLx/UPW4QyUV8fkT+ileIvAZdxd15i
RDwPup0Q+8fKeY9WnIOdvBpdPHh1T7UgrppoVwwwj6PxQZHCf6R6EgvtlftBNVyI
Zlys4rSwtDG8pbPngVPoIZlPYGMnlx0IljXiQCijHVtnU61afp7D7Rv/gH+Se+N8
2p9ne5rQ7MRevYdH07etWbMPmlZ/nbgbha9+hCC5jvZceyhekC7TCxfi2PtswGon
uW1RQhuemZnHHvmtPzsQrHOddwCv7FmozKankdLoEfnYIfjkNywbJCAAnuD7jCg+
s0utZwXb7uarQszEb7PMy3bCuHoKzqRy8ICw6SDBw2Vc7x2HFQk=
=E/L6
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) IEEE1394 ARP payload contains no target hardware address in the
ARP packet. Apparently, arp_tables was never updated to deal with
IEEE1394 ARP properly. To deal with this, return no match in case
the target hardware address selector is used, either for inverse or
normal match. Moreover, arpt_mangle disallows mangling of the target
hardware and IP address because, it is not worth to adjust the
offset calculation to fix this, we suspect no users of arp_tables
for this family.
2) Use list_del_rcu() to delete device hooks in nf_tables, this hook
list is RCU protected, concurrent netlink dump readers can be
walking on this list, fix it by adding a helper function and use it
for consistency. From Florian Westphal.
3) Add list_splice_rcu(), this is useful for joining the local list of
new device hooks to the RCU protected hook list in chain and
flowtable. Reviewed by Paul E. McKenney.
4) Use list_splice_rcu() to publish the new device hooks in chain and
flowtable to fix concurrent netlink dump traversal.
5) Add a new hook transaction object to track device hook deletions.
The current approach moves device hooks to be deleted around during
the preparation phase, this breaks concurrent RCU reader via netlink
dump. This new hook transaction is combined with NFT_HOOK_REMOVE
flag to annotate hooks for removal in the preparation phase.
6) xt_policy inbound policy check in strict mode can lead to
out-of-bound access of the secpath array due to incorrect.
The iteration over the secpath needs to be reversed in the inbound
to check for the human readable policy, expecting inner in first
position and outer in second position, the secpath from inbound
actually stores outer in first position then in second position.
From Jiexun Wang.
7) Fix possible zero shift in nft_bitwise triggering UBSAN splat,
reject zero shift from control plane, from Kai Ma.
8) Replace simple_strtoul() in the conntrack SIP helper since it relies
on nul-terminated strings. From Florian Westphal.
* tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_sip: don't use simple_strtoul
netfilter: reject zero shift in nft_bitwise
netfilter: xt_policy: fix strict mode inbound policy matching
netfilter: nf_tables: add hook transactions for device deletions
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
rculist: add list_splice_rcu() for private lists
netfilter: nf_tables: use list_del_rcu for netlink hooks
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
====================
Link: https://patch.msgid.link/20260428095840.51961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to providing HE/EHT/UHR operation, also check
and provide HT/VHT operation, so that drivers have it and
can use it, e.g. to correctly calculate station bandwidth.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.32ad98454543.Ia9692671b699164edcc0bdaf4fdbdbefc50b18f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT/VHT/HE/EHT/UHR operation can change, and might thus be
updated on each beacon update. Move them to the beacon struct
and parse them out of the beacon also on updates, not just on
starting the AP.
This also fixes checks in two ways:
- Regulatory checks in nl80211_validate_ap_phy_operation() are
now done also on updates, disallowing enabling HE/EHT/UHR on
channels that don't allow that after start. This checks only
operation now, but clients can't use it without operation.
- NL80211_ATTR_UHR_OPERATION is now required whenever UHR is
present in the beacon, and rejected otherwise.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.f70758a46904.I0d21120b41eed661eefc61d5417dadaae7145845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The arm-linux-gnueabi-gcc compiler, align the field followed by union
members, causing size of struct ieee80211_rx_status over skb->cb
(48 bytes). By investigation, the union member starts at offset 32,
and the offset of next field rate_idx is 36 instead of expected 33, and
the total size is (unexpected) 52.
When compiling rtw88 driver, it throws:
In file included from /work/linux-src/linux-stable/include/linux/string.h:386,
from /work/linux-src/linux-stable/include/linux/bitmap.h:13,
from /work/linux-src/linux-stable/include/linux/cpumask.h:11,
from /work/linux-src/linux-stable/include/linux/smp.h:13,
from /work/linux-src/linux-stable/include/linux/lockdep.h:14,
from /work/linux-src/linux-stable/include/linux/mutex.h:17,
from /work/linux-src/linux-stable/include/linux/kernfs.h:11,
from /work/linux-src/linux-stable/include/linux/sysfs.h:16,
from /work/linux-src/linux-stable/include/linux/kobject.h:20,
from /work/linux-src/linux-stable/include/linux/dmi.h:6,
from pci.c:5:
In function 'fortify_memcpy_chk',
inlined from 'rtw_pci_rx_napi.constprop' at pci.c:1095:4:
/work/linux-src/linux-stable/include/linux/fortify-string.h:569:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
569 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After this patch, the size of struct ieee80211_rx_status is 48.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260411072509.1556635-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- some minor cleanup
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAmnrRHgACgkQq06b7GqY
5nDgGw/7BG4ry89+Q2UR5T+/zqNj/kISpemz2F0Q62lPiQEIv3IvAAGErsGR6DiR
dGvIzvsPLUAWv8gzwhfCn9zFCO92gmMRav5BxOhFpaHfqy6TTJIqe7DoRjbjjjhR
7wUId3WZ8U1V9Z7Ea3oE2gpf/rR+iwACu/O0U1ZYhuJIcmJRsBIWGnWsaZr+PWSf
VuM74YrdGcdrgMkB2hGxezjZ16MBGekWmVBjbWbQVWiUg1FBiewug9syUlJxgEnv
WatEdPu/gWcfGj9bY3RAAlUnP5YJRX22xfmLNVayBOV1LThvKDRd7RKicyDFLIWe
2NbvIaEtyMvupS8w+n0fsDFqL4/yRTwO6p26YV5nDOOMWr5yrQ6bNNmMJrJvJroP
rtG5ww8c7mKLv7wBDJua7m6IIwHxAjzpmWbvX51+ap6uN2oQL7BWbGT3NrDuRVFj
CblbXS4GzTMo5EbmOjuqO0HbA9a2gAPn6g8ElxFfKBUOJx6U86hDJ3CDfRs5i8ft
SUXXJQYJqyhniK7INPvINSoIYn/+5cQavyFay+LgMBPZ8yNY9qSZVskb/Q5AugWI
LdPoJ9DthzMzaSEiEn/sJcq8FGt8w7cOlOABYCMRazSAGWEGIwzHxOtXZp8UfifG
ULbtc9uAGxZClbaO7p2T7cWHveAz+kvvhQn0+LxLJZ+/RzuRc/w=
=miGY
-----END PGP SIGNATURE-----
Merge tag '9p-for-7.1-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- 9p access flag fix (cannot change access flag since new mount API implem)
- some minor cleanup
* tag '9p-for-7.1-rc1' of https://github.com/martinetd/linux:
9p/trans_xen: replace simple_strto* with kstrtouint
9p/trans_xen: make cleanup idempotent after dataring alloc errors
9p: document missing enum values in kernel-doc comments
9p: fix access mode flags being ORed instead of replaced
9p: fix memory leak in v9fs_init_fs_context error path
Old code like amateur radio and NFC have long been a burden
to core networking developers. syzbot loves to find bugs
in BKL-era code, and noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted.
We've talked about these deletions multiple times in the past
and every time someone wanted the code to stay. It is never
very clear to me how many of those people actually use the code
vs are just nostalgic to see it go. Amateur radio did have
occasional users (or so I think) but most users switched
to user space implementations since its all super slow stuff.
Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC
so we're giving that a chance. Let's try to put the rest of
this code behind us.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmnqqWYACgkQMUZtbf5S
IrtEpQ/9F5+8POE6dg6gJVLDKx1+i6GiaOIweAl8h5DatzhBAAGuGr9JyTw0P/iy
QX7/SU8WQIhi+LVTYBX9M5bJ3Rf+Iws4dll0CyoTTdOFvGwCAck8Ee/w+1gZdsQY
aG0mQPmftfMEdZGX3KXt8UPDWG7QX4w1gSqxqYcSs1ohN6Txi1F94tmgqXgzYHzv
vxWP3cF3XTv4eM6BpQj4tiLT3hvrTUfoCZEn9oF4Hn+miYU/yNlWxh0/pmfNjcxd
vpNN0VfJVK48uPrj57Ep2x9OjkHPviojrUZT0Y55ENBhn1Lykry4MaxsJVsVYhuC
OqJHQYTFyxwT/USTJxs1gplFyO0i37oCEEt43BKm2KS7rYHgc4pQgMJz7R2IS3wL
z1xFl45QFt5kX3pw8BvWPXwBomkbDeFORB40Y1qc8RHMfAUKqOhbhzV8rDq9uKup
0nJxdijdh3/2qdO+LB1pU5rq/MbfAxOQSnRJmKLoKLVljaZHMAVbm829sdap8OM+
VMnyPF5hOAuTHV0NZJJ2BbcznI4MFDxM1lNEWFuRC39RQeeGRIHsNMjvs4HMHLaW
V827UBXpUOK6HR3nGCKX3VpLJByUYAIkdIKvRugbWdynvXAw+FJUHx4wRzvFi6oi
E7ucUY+FI5YOS1rmQJ+rqBjhThcIAdj2U9SNAykDKRVa7zPEUMU=
=3vMU
-----END PGP SIGNATURE-----
Merge tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery.
A newer big source is Sashiko/Gemini (Roman Gushchin's system),
which points out issues in existing code during patch review
(maybe 25% of fixes here likely originating from Sashiko).
Nice thing is these are often fixed by the respective maintainers,
not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised
to be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=knNy
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf2 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2 ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a8).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Fixes: b6d9014a33 ("netfilter: nf_tables: delete flowtable hooks via transaction list")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
From the MCTP Base specification (DSP0236 v1.2.1), the first byte of
the MCTP header contains a 4 bit reserved field, and 4 bit version.
On our current receive path, we require those 4 reserved bits to be
zero, but the 9500-8i card is non-conformant, and may set these
reserved bits.
DSP0236 states that the reserved bits must be written as zero, and
ignored when read. While the device might not conform to the former,
we should accept these message to conform to the latter.
Relax our check on the MCTP version byte to allow non-zero bits in the
reserved field.
Fixes: 889b7da23a ("mctp: Add initial routing framework")
Signed-off-by: Yuan Zhaoming <yuanzm2@lenovo.com>
Cc: stable@vger.kernel.org
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260417141340.5306-1-yuanzhaoming901030@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Usual collection of driver changes, more core infrastructure updates that
typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
- Promote UMEM to a core component, split out DMA block iterator logic
- Introduce FRMR pools with aging, statistics, pinned handles, and netlink
control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
- Fixes:
IB/core zero dmac neighbor resolution race
GID table memory free
rxe pad/ICRC validation and r_key async errors
mlx4 external umem for CQ
umem DMA attributes on unmap
mana_ib RX steering on RSS QP destroy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
=dd92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE(), WRITE_ONCE() data_race() annotations to keep KCSAN happy.
Fixes: bb7c19f960 ("tcp: add related fields into SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>