Commit graph

536,164 commits

Author SHA1 Message Date
Daniel Vetter
cc4ceb484b drm: Global atomic state handling
Some differences compared to Rob's patches again:
- Dropped the committed and checked booleans. Checking will be
  internally enforced by always calling ->atomic_check before
  ->atomic_commit. And async handling needs to be solved differently
  because the current scheme completely side-steps ww mutex deadlock
  avoidance (and so either reinvents a new deadlock avoidance wheel or
  like the current code just deadlocks).

- State for connectors needed to be added, since now they have a
  full-blown drm_connector_state (so that drivers have something to
  attach their own stuff to).

- Refcounting is gone. I plane to solve async updates differently,
  since the lock-passing scheme doesn't cut it (since it abuses ww
  mutexes). Essentially what we need for async is a simple ownership
  transfer from the caller to the driver. That doesn't need full-blown
  refcounting.

- The acquire ctx is a pointer. Real atomic callers should have that
  on their stack, legacy entry points need to put the right one
  (obtained by drm_modeset_legacy_acuire_ctx) in there.

- I've dropped all hooks except check/commit. All the begin/end
  handling is done by core functions and is the same.

- commit/check are just thin wrappers that ensure that ->check is
  always called.

- To help out with locking in the legacy implementations I've added a
  helper to just grab all locks in the backoff case.

v2: Add notices that check/commit can fail with EDEADLK.

v3:
- More consistent naming for state_alloc.
- Add state_clear which is needed for backoff and retry.

v4: Planes/connectors can switch between crtcs, and we need to be
careful that we grab the state (and locks) for both the old and new
crtc. Improve the interface functions to ensure this.

v5: Add functions to grab affected connectors for a crtc and to recompute
the crtc->enable state. This is useful for both helper and atomic ioctl
code when e.g. removing a connector.

v6: Squash in fixup from Fengguang to use ERR_CAST.

v7: Add debug output.

v8: Make checkpatch happy about kcalloc argument ordering.

v9: Improve kerneldoc in drm_crtc.h

v10:
- Fix another kcalloc argument misorder I've missed.
- More polish for kerneldoc.

v11: Clarify the ownership rules for the state object. The new rule is
that a successful drm_atomic_commit (whether synchronous or asnyc)
always inherits the state and is responsible for the clean-up. That
way async and sync ->commit functions are more similar.

v12: A few bugfixes:
- Assign state->state pointers correctly when grabbing state objects -
  we need to link them up with the global state.
- Handle a NULL crtc in set_crtc_for_plane to simplify code flow a bit
  for the callers of this function.

v13: Review from Sean:
- kerneldoc spelling fixes
- Don't overallocate states->planes.
- Handle NULL crtc in set_crtc_for_connector.

v14: Sprinkle __must_check over all functions which do wait/wound
locking to make sure callers don't forget this. Since I have ;-)

v15: Be more explicit in the kerneldoc when functions can return
-EDEADLK what to do. And that every other -errno is fatal.

v16: Indent with tabs instead of space, spotted by Ander.

v17: Review from Thierry, small kerneldoc and other naming polish.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 18:05:36 +01:00
Dmitry Monakhov
88c6b61ff1 ext4: move_extent improve bh vanishing success factor
Xiaoguang Wang has reported sporadic EBUSY failures of ext4/302
Unfortunetly there is nothing we can do if some other task holds BH's
refenrence.  So we must return EBUSY in this case.  But we can try
kicking the journal to see if the other task releases the bh reference
after the commit is complete.  Also decrease false positives by
properly checking for ENOSPC and retrying the allocation after kicking
the journal --- which is done by ext4_should_retry_alloc().

[ Modified by tytso to properly check for ENOSPC. ]

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-05 11:52:38 -05:00
Lars-Peter Clausen
1b86a3fa4e ASoC: ad193x: Keep DAC output stage active in idle
Setting the DAC power-down bit for the ad193x will also disable the DAC
output amplifier. This will cause audible clicks and pops when starting or
stopping playback. To prevent this a new widget is introduced that controls
the DAC power-down bit. This widget is connected to both the DAC and a newly
introduced VMID widget. This makes sure that the DAC power-down bit is not
set as long as a audio sink is connected to the DAC output. At the same time
the PLL and SYSCLK will still be disabled when no playback or capture stream
is active.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 16:33:08 +00:00
Borislav Petkov
85be07c324 x86, microcode: Fix accessing dis_ucode_ldr on 32-bit
We should be accessing it through a pointer, like on the BSP.

Tested-by: Richard Hendershot <rshendershot@mchsi.com>
Fixes: 65cef1311d ("x86, microcode: Add a disable chicken bit")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05 17:28:06 +01:00
Catalin Marinas
97b56be103 arm64: compat: Enable bpf syscall
Following the arm32 commit 2d605a3029 (ARM: enable bpf syscall), wire
this syscall for arm64 compat as well.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-05 16:26:35 +00:00
Daniel Vetter
144ecb97cd drm: Add atomic driver interface definitions for objects
Heavily based upon Rob Clark's atomic series.
- Dropped the connector state from the crtc state, instead opting for a
  full-blown connector state. The only thing it has is the desired
  crtc, but drivers which have connector properties have now a
  data-structure to subclass.

- Rename create_state to duplicate_state. Especially for legacy ioctls
  we want updates on top of existing state, so we need a way to get at
  the current state. We need to be careful to clear the backpointers
  to the global state correctly though.

- Drop property values. Drivers with properties simply need to
  subclass the datastructures and track the decoded values in there. I
  also think that common properties (like rotation) should be decoded
  and stored in the core structures.

- Create a new set of ->atomic_set_prop functions, for smoother
  transitions from legacy to atomic operations.

- Pass the ->atomic_set_prop ioctl the right structure to avoid
  chasing pointers in drivers.

- Drop temporary boolean state for now until we resurrect them with
  the helper functions.

- Drop invert_dimensions. For now we don't need any checking since
  that's done by the higher-level legacy ioctls. But even then we
  should also add rotation/flip tracking to the core drm_crtc_state,
  not just whether the dimensions are inverted.

- Track crtc state with an enable/disable. That's equivalent to
  mode_valid, but a bit clearer that it means the entire crtc.

The global interface will follow in subsequent patches.

v2: We need to allow drivers to somehow set up the initial state and
clear it on resume. So add a plane->reset callback for that. Helpers
will be provided with default behaviour for all these.

v3: Split out the plane->reset into a separate patch.

v4: Improve kerneldoc in drm_crtc.h

v5: Remove unused inline functions for handling state objects, those
callbacks are now mandatory for full atomic support.

v6: Fix commit message nit Sean noticed.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 17:23:26 +01:00
Daniel Vetter
b7a1aafda6 drm/modeset_lock: document trylock_only in kerneldoc
I've forgotten to do this in:

commit cb597bb3a2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 27 19:09:33 2014 +0200

    drm: trylock modest locking for fbdev panics

Oops, fix this asap.

In my defense kerneldoc is really awful and there's no way it can pick
up structured comments per struct member. Which means we need both
since people won't scroll up even a few lines.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-05 17:23:16 +01:00
Hannes Reinecke
f9ca5ab832 libata-scsi: Update SATL for ZAC drives
ZAC (zoned-access command) drives translate into ZBC (Zoned block
command) device type for SCSI. So implement the correct mappings
into libata-scsi and update the SCSI command set versions.

Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-11-05 11:22:07 -05:00
Hannes Reinecke
9162c6579b libata: Implement ATA_DEV_ZAC
Add new ATA device type for ZAC devices.

Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-11-05 11:22:06 -05:00
Hannes Reinecke
1cbd772d9a libsas: use ata_dev_classify()
Use the ata device class from libata in libsas instead of checking
the supported command set and switch to using ata_dev_classify()
instead of our own method.

Cc: Tejun Heo <tj@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-11-05 11:22:06 -05:00
Hartmut Knaack
81ebe850a0 iio:pressure:bmp280: fix pressure calculation
According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:58:35 +00:00
Abhilash Kesavan
c1b501564c iio: adc: exynos_adc: Add support for exynos7
The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
	- exynos7-adc has 8 input channels (as against 10 in ADCv2).
	- exynos7 does not include an ADC PHY control register.
	- Some ADC_CON2 register bits being used in ADCv2 are listed as
	  reserved in exynos7-adc. This results in a different init_hw
	  function for exynos7.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:38:25 +00:00
Naveen Krishna Chatradhi
db9bf4d657 ARM: dts: exynos: Add sysreg phandle to ADC node
Instead of using the ADC_PHY register base address, use sysreg phandle
in ADC node to control ADC_PHY configuration register.

This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250,
and Exynos5420, Exynos5800.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:30:32 +00:00
Naveen Krishna Chatradhi
b626c8f0d9 Documentation: dt-bindings: update exynos-adc.txt with syscon handle
This patch updates the DT bindings for ADC in exynos-adc.txt with the
syscon phandle to the ADC nodes.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: devicetree@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:30:16 +00:00
Naveen Krishna Chatradhi
fafb37cfae iio: exyno-adc: use syscon for PMU register access
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:30:09 +00:00
Shuah Khan
7069a97a14 selftests/net: move test out of Makefile into a shell script
Currently bpf test run from the Makefile. Move it out of the
Makefile to be run from a shell script to allow the test to
be run as stand-alone test, in addition to allowing the test
run from a make target.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
2014-11-05 08:12:40 -07:00
Mark Brown
2a7509b187 Merge remote-tracking branches 'regulator/fix/max1586', 'regulator/fix/max77686', 'regulator/fix/max77693', 'regulator/fix/max77802', 'regulator/fix/max8860' and 'regulator/fix/s2mpa01' into regulator-linus 2014-11-05 14:59:25 +00:00
Mark Brown
df3307126b Merge remote-tracking branch 'regulator/fix/core' into regulator-linus 2014-11-05 14:59:24 +00:00
Oder Chiou
d65fd3a42e ASoC: rt5677: Minor coding style and typo fix
Minor coding style and typo fix

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:56:43 +00:00
Tomasz Pala
f5b10c45ef amd64_edac: Build module on x86-32
By popular demand, enable amd64_edac on 32-bit too.

Boris:
 - update Kconfig text.
 - add a warning on load which states that 32-bit configurations are unsupported.

Signed-off-by: Tomasz Pala <gotar@polanet.pl>
Link: http://lkml.kernel.org/r/20141102102212.GA7034@polanet.pl
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-11-05 15:54:34 +01:00
Lars-Peter Clausen
b131c02e99 ASoC: wm8995: Use table based DAPM and control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:49:51 +00:00
Lars-Peter Clausen
c4f50dbc56 ASoC: wm8961: Use table based DAPM and control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:49:29 +00:00
Lars-Peter Clausen
a6bf306988 ASoC: wm8737: Use table based DAPM and control setup
Makes the code a bit cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:49:06 +00:00
Lars-Peter Clausen
c8b5d089d6 ASoC: wl1273: Use table based control setup
Makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:48:40 +00:00
Lars-Peter Clausen
e3f1ff318e ASoC: tas2552: Use table based DAPM setup
Makes the code a bit cleaner and shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:48:05 +00:00
Lars-Peter Clausen
0c239fa6eb ASoC: sn95031: Use table based control setup
Makes the code a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 14:47:40 +00:00
Karol Wrona
b6d5be5702 staging: iio: Add notrigger mode for generic_buffer
Some IIO devices do not use the triggers. This patch makes trigger setting
conditional so generic_buffer can be used when triggers are disabled.

Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 14:45:18 +00:00
Takashi Iwai
19566b0bd9 Merge branch 'for-linus' into for-next
This merges the USB-audio disconnect fix and resolves the conflicts
so that we can continue working on development of usb-audio stuff.

Conflicts:
	sound/usb/card.c
2014-11-05 15:37:22 +01:00
Takashi Iwai
0725dda207 ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect
Some USB-audio devices show weird sysfs warnings at disconnecting the
devices, e.g.
 usb 1-3: USB disconnect, device number 3
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180()
 sysfs group ffffffff8183df40 not found for kobject 'midiC1D0'
 Call Trace:
  [<ffffffff814a3e38>] ? dump_stack+0x49/0x71
  [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0
  [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50
  [<ffffffff813521e9>] ? device_del+0x39/0x180
  [<ffffffff81352339>] ? device_unregister+0x9/0x20
  [<ffffffff81352384>] ? device_destroy+0x34/0x40
  [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd]
  [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi]
  [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd]
  [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd]
  [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd]
  [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio]
  [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore]
  [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0
  [<ffffffff81355485>] ? device_release_driver+0x25/0x40
  [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130
  [<ffffffff813522b9>] ? device_del+0x109/0x180
  [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore]
  [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore]
  [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore]
  [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80
  [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0
  [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0
  [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
  [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
  [<ffffffff8105973e>] ? kthread+0xce/0xf0
  [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
  [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0
  [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
 ---[ end trace 40b1928d1136b91e ]---

This comes from the fact that usb-audio driver may receive the
disconnect callback multiple times, per each usb interface.  When a
device has both audio and midi interfaces, it gets called twice, and
currently the driver tries to release resources at the last call.
At this point, the first parent interface has been already deleted,
thus deleting a child of the first parent hits such a warning.

For fixing this problem, we need to call snd_card_disconnect() and
cancel pending operations at the very first disconnect while the
release of the whole objects waits until the last disconnect call.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931
Reported-and-tested-by: Tomas Gayoso <tgayoso@gmail.com>
Reported-and-tested-by: Chris J Arges <chris.j.arges@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05 15:36:25 +01:00
Sudip Mukherjee
9161bd0d1c ALSA: echoaudio: cleanup of unnecessary messages
commit "b5b4a41b39" was dereferencing
chip after it has been freed. This patch fixes that and at the same
time removes some debugging messages, which are unnecessary, as they
are just printing information about entry and exit from a function,
and which switch-case it is executing.
we can easily get from ftrace the information about the entry and exit
from a function.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-05 15:35:57 +01:00
Ville Aakko
7bb9d64365 HID: saitek: quirk for Saitek R.A.T.7 works with R.A.T.9 too
I have tested HID quirk for Saitek R.A.T.7 with my R.A.T. 9. It works fine for
me. Attached patch makes the necessary changes to use the quirk on the R.A.T.9
too, and necessary Kconfig changes too.

I have stylized the Kconfig option name to include Mad Catz in the option name,
as (at least some of) the devices are marketed under Mad Catz brand.

Signed-off-by: Ville Aakko <ville.aakko@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-05 15:13:59 +01:00
Miklos Szeredi
3f822c6264 ovl: don't poison cursor
ovl_cache_put() can be called from ovl_dir_reset() if the cache needs to be
rebuilt.  We did list_del() on the cursor, which results in an Oops on the
poisoned pointer in ovl_seek_cursor().

Reported-by: Jordi Pujol Palomer <jordipujolp@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Jordi Pujol Palomer <jordipujolp@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-05 08:49:38 -05:00
George McCollister
455f0049e0 iio: as3935: Remove unnecessary semicolons
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 13:47:42 +00:00
Namhyung Kim
96d78059d6 perf tools: Make vmlinux short name more like kallsyms short name
The previous patch changed kernel dso name from '[kernel.kallsyms]' to
vmlinux.  However it might add confusion to old users accustomed to the
old name.  So change the short name to '[kernel.vmlinux]' to reduce such
confusion.

Before:
  # Overhead  Command         Shared Object            Symbol
  # ........  ..............  .......................  ...............................
  #
       9.83%  swapper         vmlinux                  [k] intel_idle
       4.10%  awk             libc-2.20.so             [.] __strcmp_sse2
       1.86%  sed             libc-2.20.so             [.] __strcmp_sse2
       1.78%  netctl-auto     libc-2.20.so             [.] __strcmp_sse2
       1.23%  netctl-auto     libc-2.20.so             [.] __mbrtowc
       1.21%  firefox         libxul.so                [.] 0x00000000024b62bd
       1.20%  swapper         vmlinux                  [k] cpuidle_enter_state
       1.03%  sleep           vmlinux                  [k] copy_user_generic_unrolled

After:
  # Overhead  Command         Shared Object            Symbol
  # ........  ..............  .......................  ...............................
  #
       9.83%  swapper         [kernel.vmlinux]         [k] intel_idle
       4.10%  awk             libc-2.20.so             [.] __strcmp_sse2
       1.86%  sed             libc-2.20.so             [.] __strcmp_sse2
       1.78%  netctl-auto     libc-2.20.so             [.] __strcmp_sse2
       1.23%  netctl-auto     libc-2.20.so             [.] __mbrtowc
       1.21%  firefox         libxul.so                [.] 0x00000000024b62bd
       1.20%  swapper         [kernel.vmlinux]         [k] cpuidle_enter_state
       1.03%  sleep           [kernel.vmlinux]         [k] copy_user_generic_unrolled

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:14:09 -03:00
Namhyung Kim
b837a8bdc4 perf tools: Fix build-id matching on vmlinux
There's a problem on finding correct kernel symbols when perf report
runs on a different kernel.  Although a part of the problem was solved
by the prior commit 0a7e6d1b68 ("perf tools: Check recorded kernel
version when finding vmlinux"), there's a remaining problem still.

When perf records samples, it synthesizes the kernel map using
machine__mmap_name() and ref_reloc_sym like "[kernel.kallsyms]_text".
You can easily see it using 'perf report -D' command.

After finishing record, it goes through the recorded events to find
maps/dsos actually used.  And then record build-id info of them.

During this process, it needs to load symbols in a dso and it'd call
dso__load_vmlinux_path() since the default value of the symbol_conf.
try_vmlinux_path is true.  However it changes dso->long_name to a real
path of the vmlinux file (e.g. /lib/modules/3.16.4/build/vmlinux) if one
is running on a custom kernel.

It resulted in that perf report reads the build-id of the vmlinux, but
cannot use it since it only knows about the [kernel.kallsyms] map.  It
then falls back to possible vmlinux paths by using the recorded kernel
version (in case of a recent version) or a running kernel silently.

Even with the recent tools, this still has a possibility of breaking
the result.  As the build directory is a symbolic link, if one built a
new kernel in the same directory with different source/config, the old
link to vmlinux will point the new file.  So it's absolutely needed to
use build-id when finding a kernel image.

In this patch, it's now changed to try to search a kernel dso in the
existing dso list which was constructed during build-id table parsing
so it'll always have a build-id.  If not found, search "[kernel.kallsyms]".

Before:

  $ perf report
  # Children      Self  Command  Shared Object      Symbol
  # ........  ........  .......  .................  ...............................
  #
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] set_curr_task_rt
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] native_calibrate_tsc
      72.15%     0.00%  swapper  [kernel.kallsyms]  [k] tsc_refine_calibration_work
      71.87%    71.87%  swapper  [kernel.kallsyms]  [k] module_finalize
   ...

After (for the same perf.data):

      72.15%     0.00%  swapper  vmlinux  [k] cpu_startup_entry
      72.15%     0.00%  swapper  vmlinux  [k] arch_cpu_idle
      72.15%     0.00%  swapper  vmlinux  [k] default_idle
      71.87%    71.87%  swapper  vmlinux  [k] native_safe_halt
   ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140924073356.GB1962@gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:14:08 -03:00
Namhyung Kim
00dc865798 perf record: Do not save pathname in ./debug/.build-id directory for vmlinux
When perf record finishes a session, it pre-processes samples in order
to write build-id info from DSOs that had samples.

During this process it'll call map__load() for the kernel map, and it
ends up calling dso__load_vmlinux_path() which replaces dso->long_name.

But this function checks kernel's build-id before searching vmlinux path
so it'll end up with a cryptic name, the pathname for the entry in the
~/.debug cache, which can be confusing to users.

This patch adds a flag to skip the build-id check during record, so
that it'll have the original vmlinux path for the kernel dso->long_name,
not the entry in the ~/.debug cache.

Before:
  # perf record -va sleep 3
  mmap size 528384B
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.196 MB perf.data (~8545 samples) ]
  Looking at the vmlinux_path (7 entries long)
  Using /home/namhyung/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551 for symbols

After:
  # perf record -va sleep 3
  mmap size 528384B
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.193 MB perf.data (~8432 samples) ]
  Looking at the vmlinux_path (7 entries long)
  Using /lib/modules/3.16.4-1-ARCH/build/vmlinux for symbols

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:14:08 -03:00
Namhyung Kim
e195fac807 perf build-id: Move build-id related functions to util/build-id.c
It'd be better managing those functions in a separate place as
util/header.c file is already big.

It now exports following 3 functions to others:

  bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
  int perf_session__write_buildid_table(struct perf_session *session, int fd);
  int perf_session__cache_build_ids(struct perf_session *session);

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/545733E7.6010105@intel.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:14:07 -03:00
Namhyung Kim
714c9c4a98 perf build-id: Rename dsos__write_buildid_table()
The dsos__write_buildid_table() is not use struct dso and it mostly
uses perf_session struct.

So rename it to perf_session__write_buildid_ table() so that it
corresponds to other related functions such as
perf_session__read_build_ids() and perf_session__cache_build_ids().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:14:07 -03:00
Namhyung Kim
e92ce12ed6 perf tools: Add gzip decompression support for kernel module
Now my Archlinux box shows module symbols correctly.

Before:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/date, maybe install a debug package?
  No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found
  [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols
  No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found
  [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols
  No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found
  [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found
  [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols
  No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found
  [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols
  No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found
  [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols
  No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found
  [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols
  No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found
  [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols
  No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found
  [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols
  No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found
  [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols
  ...
  #
  # Overhead  Command          Shared Object            Symbol
  # ........  ...............  .......................  ........................................................
  #
       0.03%  swapper          [ext4]                   [k] 0x000000000000fe2e
       0.03%  swapper          [kernel.kallsyms]        [k] account_entity_enqueue
       0.03%  swapper          [ext4]                   [k] 0x000000000000fc2b
       0.03%  irq/50-iwlwifi   [iwlwifi]                [k] 0x000000000000200b
       0.03%  swapper          [kernel.kallsyms]        [k] ktime_add_safe
       0.03%  swapper          [kernel.kallsyms]        [k] elv_completed_request
       0.03%  swapper          [libata]                 [k] 0x0000000000003997
       0.03%  swapper          [libahci]                [k] 0x0000000000001f25
       0.03%  swapper          [kernel.kallsyms]        [k] rb_next
       0.03%  swapper          [kernel.kallsyms]        [k] blk_finish_request
       0.03%  swapper          [ext4]                   [k] 0x0000000000010248
       0.00%  perf             [kernel.kallsyms]        [k] native_write_msr_safe

After:
  $ perf report --stdio
  Failed to open /tmp/perf-3477.map, continuing without symbols
  no symbols found in /usr/bin/tr, maybe install a debug package?
  ...
  #
  # Overhead  Command          Shared Object                Symbol
  # ........  ...............  ...........................  ......................................................
  #

       0.04%  kworker/u16:3    [ext4]                       [k] ext4_read_block_bitmap
       0.03%  kworker/u16:0    [mac80211]                   [k] ieee80211_sta_reset_beacon_monitor
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_get_bssid
       0.02%  firefox          [e1000e]                     [k] __ew32_prepare
       0.02%  swapper          [libahci]                    [k] ahci_handle_port_interrupt
       0.02%  emacs            libglib-2.0.so.0.4000.0      [.] g_mutex_unlock
       0.02%  swapper          [e1000e]                     [k] e1000_clean_tx_irq
       0.02%  dwm              [kernel.kallsyms]            [k] __schedule
       0.02%  gnome-terminal-  [vdso]                       [.] __vdso_clock_gettime
       0.02%  swapper          [e1000e]                     [k] e1000_alloc_rx_buffers
       0.02%  irq/50-iwlwifi   [mac80211]                   [k] ieee80211_rx
       0.01%  firefox          [vdso]                       [.] __vdso_gettimeofday
       0.01%  irq/50-iwlwifi   [iwlwifi]                    [k] iwl_pcie_rxq_restock.part.13

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-11-05 10:11:26 -03:00
Jani Nikula
babc94936b drm/edid: add #defines and helpers for ELD
In the interest of reducing magic numbers and having to cross check with
the specs all the time.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 14:03:44 +01:00
Todd Previte
e9cf6194ab drm/dp: Add counters in the drm_dp_aux struct for I2C NACKs and DEFERs
These counters are used for Displayort compliance testing to detect error
conditions when executing tests 4.2.2.4 and 4.2.2.5 in the Displayport Link
CTS specificaiton. They determine whether to use the preferred/requested
mode or the failsafe mode during these tests.

V2:
- Addressed previous review feedback
- Updated commit message
- Changed from uint8_t to uint32_t

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Todd Previte <tprevite@gmail.com>
[danvet: s/uint32_t/unsigned/ for clearer intent. Also drop the i915
from the subject, it's all core stuff.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 14:03:22 +01:00
Will Deacon
f2001bd5b8 UEFI updates for arm64
This series consists of:
 - fixes for compliance with PE/COFF and UEFI specs
 - added support for SMBIOS, including upcoming version 3.0
 - cleanups and diagnostic output improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQF8BAABCgBmBQJUWf+KXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w
 ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ5Q0QyQTBEQTZBRDhGNzMzMDE3NUUyQkJD
 MjM3MjA3RTk1NzRGQTdEAAoJEMI3IH6VdPp9T+MH/227Uei0tw1aTghisTqQ3cY5
 4EowpMAJggFW5flBv5f+6vP0LMb8WTRsj2phlHZLlIatTD+TPcatSI6VnIxT2RWg
 UUD9mSxPYfIu5FVYGryySIpr5lU66nQmbafRAbQ16n20cZSsbAxaBkpIR1/R1sL3
 ZQQdBcjiV6wIFuM9o7jd4pDzBfYzlM5rQh3nGb+6385CqazFaiWq7JR+uvICMu14
 0nBtP9u9yxALlGC60HqbRxU7fBa9K5uPVVnedR6BJQLDJrZPEaQCGLsxL9XX/O7z
 jqO6F3drjKcRZ3dy+2OR8MtIl2uleUoA7XDT6cPDgm24FAlWOP9VfYzHVcK6vUU=
 =Gpfl
 -----END PGP SIGNATURE-----

Merge tag 'for-3.19' of git://git.linaro.org/people/ard.biesheuvel/linux-arm into ard/efi-for-3.19

Pull UEFI updates from Ard Biesheuvel:

  - fixes for compliance with PE/COFF and UEFI specs
  - added support for SMBIOS, including upcoming version 3.0
  - cleanups and diagnostic output improvements

Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-05 13:01:13 +00:00
Mauro Carvalho Chehab
a235473742 [media] cx24110: Simplify error handling at cx24110_set_fec()
move the return to happen before the logic. This way, we can
avoid one extra identation.

This also fixes an identation issue on this function.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 10:00:45 -02:00
Mauro Carvalho Chehab
6deaca2bc3 [media] cx23110: Fix return code for cx24110_set_fec()
When a parameter is invalid, the right return code is
-EINVAL.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:58:07 -02:00
Mauro Carvalho Chehab
5eb2829212 [media] cx24110: Fix whitespaces at cx24110_set_fec()
It is hard to read what's there, because it doesn't follow the
CodingStyle.

Add missing whitespaces to split function arguments.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:57:33 -02:00
Mauro Carvalho Chehab
b8e64df002 [media] cx24110: Fix a spatch warning
This is actually a false positive:
	drivers/media/dvb-frontends/cx24110.c:210 cx24110_set_fec() error: buffer overflow 'rate' 7 <= 8

But fixing it is easy: just ensure that the table size will be
limited to FEC_AUTO.

While here, fix spacing on the affected lines.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:56:12 -02:00
Mauro Carvalho Chehab
667c952e71 [media] cx22700: Fix potential buffer overflow
As new FEC types were added, we need a check to avoid overflows:
	drivers/media/dvb-frontends/cx22700.c:172 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6
	drivers/media/dvb-frontends/cx22700.c:173 cx22700_set_tps() error: buffer overflow 'fec_tab' 6 <= 6

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:42:22 -02:00
Nadav Amit
d29b9d7ed7 KVM: x86: Fix uninitialized op->type for some immediate values
The emulator could reuse an op->type from a previous instruction for some
immediate values.  If it mistakenly considers the operands as memory
operands, it will performs a memory read and overwrite op->val.

Consider for instance the ROR instruction - src2 (the number of times)
would be read from memory instead of being used as immediate.

Mark every immediate operand as such to avoid this problem.

Cc: stable@vger.kernel.org
Fixes: c44b4c6ab8
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-05 12:36:58 +01:00
Mauro Carvalho Chehab
b9f62ffe05 [media] stb0899: don't go past DiSEqC msg buffer
As reported by spatch:
	drivers/media/dvb-frontends/stb0899_drv.c:720 stb0899_send_diseqc_msg() error: buffer overflow 'cmd->msg' 6 <= 7

The buffer size is 6 and not 8. Anyway, the best is to use sizeof(),
to avoid such mistakes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:34:12 -02:00
Mauro Carvalho Chehab
fb9b1641ba [media] rc-main: Fix rc_type handling
As reported by smatch:
	drivers/media/rc/rc-main.c:1426 rc_register_device() warn: should '1 << rc_map->rc_type' be a 64 bit type?

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-05 09:28:01 -02:00