This spinlock isn't necessary because if we are in TX_ON/TX_ARET_ON
state the transceiver can't be interrupted e.g. by receiving a frame
when a SHR was detected. In this time the transceiver doesn't leave
the TX_ON/TX_ARET_ON state until the tx complete irq change the state
into RX_AACK_ON again. This means a receiving interrupt in state
TX_ON/TX_ARET_ON can't happen and is_tx is protected by transceiver.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch cleanups the checking of different mac phy depended values by
handling depended mac settings per hw support flag in one condition.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add support for the AM43xx HDQ/1-wire driver and fix the GPTIMER data
for DRA7xx.
Note that I do not have AM43xx nor DRA7xx boards, and cannot test these
patches on those platforms.
Basic build, boot, and PM test logs are available at:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.1/20150324185246/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LU/x
-----END PGP SIGNATURE-----
Merge tag 'for-v4.1/omap-hwmod-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v4.1/soc
OMAP hwmod data changes for AM43xx and DRA7xx for v4.1
Add support for the AM43xx HDQ/1-wire driver and fix the GPTIMER data
for DRA7xx.
Note that I do not have AM43xx nor DRA7xx boards, and cannot test these
patches on those platforms.
Basic build, boot, and PM test logs are available at:
http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.1/20150324185246/
Flash lock/unlock is a flash-specific operations. Factor out a callback
for it to more readily support other vendors.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: VIET NGA DAO <vndao@altera.com>
This driver will set RT5645_DEPOP_MAN bit in headphone power up
depop process. We need to restore it in headphone power down
process. Otherwise, we will get headphone noise when push button
function is enabled.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In codec bias level off, we need to disable gate mode with MCLK
for power saving. It is set by one bit. We don't need to write
while register for that.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5645 doesn't support auto incrementing writes so driver should set
the use_single_rw flag for regmap.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5650 and rt5645 use different register bits for format configuration.
This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support
both codecs.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.
This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We must not send a close or delegreturn that would result in a
return-on-close of the layout without ensuring that we've also
sent the necessary layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the caller does not specify the O_SYNC flag, then it is legitimate
to return from O_DIRECT without doing a pNFS layoutcommit operation.
However if the file is opened O_DIRECT|O_SYNC then we'd better get it
right.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
File unlock needs to update both data and metadata on the NFS server
in order to act as a synchronisation point for other clients.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
pnfs_set_layoutcommit() and pnfs_commit_set_layoutcommit() are 100% identical
except for the function arguments. Refactor to eliminate the difference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the NFS_INO_LAYOUTCOMMIT flag was unset, then we _must_ ensure that
we also reset the last write byte (lwb) for that layout. The current
code depends on us clearing the lwb when we clear NFS_INO_LAYOUTCOMMIT,
which is not the case when we call pnfs_clear_layoutcommit().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The spec says that once all layouts that reference a given deviceid
have been returned, then we are only allowed to continue to cache
the deviceid if the metadata server supports notifications.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We are only allowed to cache deviceinfo if the server supports notifications
and actually promises to call us back when changes occur. Right now, we
request those notifications, but then we don't check the server's reply.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use of synchronize_rcu() when unmounting and potentially freeing a lot
of deviceids is problematic. There really is no reason why we can't just
use kfree_rcu() here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This driver is orphaned now that mach-msm has been removed.
Delete it.
Cc: Chris Ball <chris@printf.net>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
This driver is orphaned now that mach-msm has been removed.
Delete it.
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
The maintainers for mach-msm no longer have any plans to support
or test the platforms supported by this architecture[1]. Most likely
there aren't any active users of this code anyway, so let's
delete it.
[1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add me to co-author and fix no '>' in greg kh's email
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
We remove non-used define in this patch to avoid wrong usage.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
We extract TIOCGSERIAL section in f81232_ioctl() to f81232_get_serial_info()
to make it clarify.
Also we fix device type from 16654 to 16550A, and set it's baud_base
to 115200 (1.8432MHz/16).
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The original driver had do not any h/w change in driver.
This patch implements with configure H/W for
baud/parity/word length/stop bits functional in f81232_set_termios().
This patch also implement DTR/RTS control when baudrate B0.
We drop DTR/RTS when B0, otherwise enable it.
We are checking baudrate in set_termios() too, If baudrate larger then 115200,
it will be changed to 115200 and use tty_encode_baud_rate() to encode into tty
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
We put FCR/IER initial step to f81232_port_enable()/f81232_port_disable().
When port is open, it set MSR interrupt on. Otherwise set it off.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
This patch implement relative MCR/MSR function, such like
tiocmget()/tiocmset()/dtr_rts()/carrier_raised()
original f81232_carrier_raised() compared with wrong value UART_DCD.
It's should compared with UART_MSR_DCD.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The interrupt endpoint will report current IIR. If we got IIR with MSR changed
, We will do read MSR with interrupt_work worker to do f81232_read_msr()
function.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The original driver lock with spin_lock_irqsave()/spin_unlock_irqrestore()
because of it's maybe used in interrupt context f81232_process_read_urb().
We had remove it from previous patch "implement RX bulk-in EP", so we can
change it from busying loop spin_lock to sleepable mutex_lock.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The F81232 bulk-in is RX data + LSR channel, data format is
[LSR+Data][LSR+Data]..... , We had implemented in f81232_process_read_urb().
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
[johan: reword comment in process_read_urb ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Change private struct member name from line_status to modem_status.
It will store MSR for some functions used
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The smatch tool report warning:
...
CHECK sound/soc/intel/sst-haswell-pcm.c
sound/soc/intel/sst-haswell-pcm.c:1110 hsw_pcm_probe() error: buffer overflow\
'hsw_dais' 4 <= 4
sound/soc/intel/sst-haswell-pcm.c:1112 hsw_pcm_probe() error: buffer overflow\
'hsw_dais' 4 <= 4
...
fix it by use its own struct member for post-process module, rather than sharing
unused pcm member.
Signed-off-by: Lu, Han <han.lu@intel.com>
Acked-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kinglong Mee reports that asynchronous delegations are being killed
by the call to rpc_shutdown_client() when unmounting. This can lead
to state leakage on the server until the client lease expires.
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the task needs to give up the socket lock in order to allow a
reconnect to occur, then it must also clear the 'rq_bytes_sent' field
so that when it retransmits, it knows to start from the beginning.
Fixes: 718ba5b873 ("SUNRPC: Add helpers to prevent socket create from racing")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Add some tracepoints for ata_qc_issue, ata_qc_complete, and
ata_eh_link_autopsy.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
If NCQ autosense or the sense data reporting feature is enabled
the LBA of the offending command should be stored in the sense
data 'information' field.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
ACS-4 defines a sense data reporting feature set.
This patch implements support for it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some newer devices support NCQ autosense (cf ACS-4), so we should
be using it to retrieve the sense code and speed up recovery.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
