Commit cd28a1a9ba ("net: dsa: fully divert PHY reads/writes if
requested") introduced a check for particular PHYs that need to be
accessed using the slave MII bus created by DSA, but this check was too
inclusive. This would prevent fixed PHYs from being successfully
registered because those should not go through the slave MII bus created
by DSA.
Make sure we check that the PHY is not a fixed PHY to prevent that from
happening.
Fixes: cd28a1a9ba ("net: dsa: fully divert PHY reads/writes if requested")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On adding an interface br_add_if() sets the MTU to the min of
all the interfaces. Do the same thing on removing an interface too
in br_del_if.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"Misc i915, vmwgfx and radeon fixes along with a fix for one of those
recursive sleep mutex debug cases in the mst code"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix an issue with the device losing its irq line on module unload
drm/vmwgfx: Correctly NULLify dma buffer pointer on failure
drm/vmwgfx: Reorder device takedown somewhat
drm/vmwgfx: Fix a couple of lock dependency violations
drm/radeon: drop setting UPLL to sleep mode
drm/radeon: fix wait to actually occur after the signaling callback
drm/i915: Prevent TLB error on first execution on SNB
drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
drm/i915: use in_interrupt() not in_irq() to check context
drm/mst: fix recursive sleep warning on qlock
drm: Don't assign fbs for universal cursor support to files
This is a simple fix for a domain revalidation crash which has recently turned
up in the libsas code (applies to mvsas, isc and aic94xx).
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJVBHs/AAoJEDeqqVYsXL0M9AkH/3x305Mi8z4Lcf4ZT6ZY8Xik
pSYXPzBEKSTKYYdVJ1sIWoi1lhGLTDQEEB1WrCCy5esJK0uJY656ZeQM7kEyDBiA
ynfu5WWad4vRSEXUAOtWoqplHWBIjXIbhxv+DA4oeFOr6q02wxOHuAQO3s8yFLXi
6hSPvH9Fu3EHQIF6NgJ3XSvnLfKyFeJsvwJwrPnFijsvKCOLzyRLup5w2W1EvWKz
+dozzVoRBEmhllskIQaGECeQww44tPiDpiLayMIsRt7cqk7e+UBd+h5kZEOqSvQX
pgJiCQFp2J9lRLCU8Er/xDx/BLcr+BFWi6IM46XqcoAWpRBwUYI9KLOZyCyxijk=
=U7/F
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"This is a simple fix for a domain revalidation crash which has
recently turned up in the libsas code (applies to mvsas, isc and
aic94xx)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
libsas: Fix Kernel Crash in smp_execute_task
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-03-13
This series contains updates to ixgbe and ixgbevf.
Don adds additional support for X550 MAC types, which require additional
steps around enabling and disabling Rx. Also cleans up variable type
inconsistency.
I provide a patch to allow relaxed ordering to be enabled on SPARC
architectures. Also cleans up ixgbevf whitespace and code comments to
align the driver with networking coding standard. Lastly cleaned up
uses of memcpy() where ether_addr_copy() could have been used.
Alex removes some dead code in the ixgbe cleanup patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the missing toshiba_bluetooth and toshiba_haps entries and add
myself as their maintainer.
Also add the Maintainers entry for toshiba_acpi driver and change its
status to maintained.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds a few more events sent to TOSXXXX devices, some of
them are already identified, while some others simply print a message
informing the type of event received.
Also, a netlink event is generated so that userspace apps, daemons,
etc. act accordingly to these events.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Eric Dumazet says:
====================
inet: tcp listener refactoring, part 9
This preliminary work pushes socket convergence a bit more:
1) request sock ir_iif is universally set
2) inet_diag can use common helpers to reduce LOC
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now the three type of sockets share a common base, we can factorize
code in inet_diag_msg_common_fill().
inet_diag_entry no longer requires saddr_storage & daddr_storage
and the extra copies.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_sk_diag_fill() only copes with non timewait and non request socks
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once request socks will be in ehash table, they will need to have
a valid ir_iff field.
This is currently true only for IPv6. This patch extends support
for IPv4 as well.
This means inet_diag_fill_req() can now properly use ir_iif,
which is better for IPv6 link locals anyway, as request sockets
and established sockets will propagate consistent netlink idiag_if.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This should be >= instead of > because otherwise we read one element
past the end of the hotkey_keycode_map[] array.
The hotkey_keycode_map[] array has TPACPI_HOTKEY_MAP_LEN elements.
Fixes: 6a68d85570 ('thinkpad_acpi: Add support for more adaptive kbd buttons')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Bastien Nocera <hadess@hadess.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This needs to be signed for the error handling to work. Valid modes are
small positive integers.
Fixes: b790ceeb0f ('thinkpad_acpi: Add adaptive_kbd_mode sysfs attr')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Bastien Nocera <hadess@hadess.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds ABI documentation entries for
in_accel_thresh_falling_value, and in_accel_thresh_rising_value in /events.
There is at least one user for these, lis3l02dq in accel.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a separate structure for triggers and add the infrastructure to
support an arbitrary number of triggers. Each trigger is associated
with an interrupt and has an enabled/disabled state.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Since both triggers and events can share an interrupt, add a data
structure that tracks the users of an interrupt so that it enables or
disables it only for the first users and respectively last user.
This will allows us to easily add more events or triggers.
The patch also adds an interrupt enabled counter, so that we can
easily know if we need to put the device in normal mode when the
resume callback is issued.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When an error occurred during event registration memory was freed twice
resulting in kernel memory corruption and a crash in unrelated code.
The problem was caused by
iio_device_unregister_eventset()
iio_device_unregister_sysfs()
being called twice, once on the error path and then
again via iio_dev_release().
Fix this by making these two functions idempotent so they
may be called multiple times.
The problem was observed before applying
78b33216 iio:core: Handle error when mask type is not separate
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jon Maloy says:
====================
tipc: some optimizations and impovements
The commits in this series contain some relatively simple changes that
lead to better throughput across TIPC connections. We also make changes
to the implementation of link transmission queueing and priority
handling, in order to make the code more comprehensible and maintainable.
v2: Commit #2: Redesigned tipc_msg_validate() to use pskb_may_pull(),
as per feedback from David Miller.
Commit #3: Some cosmetic changes to tipc_msg_extract(). I tried to
replace the unconditional skb_linearize() with calls to
pskb_may_pull() at selected locations, but I gave up.
First, skb_trim() requires a fully linearized buffer.
Second, it doesn't make much sense; the whole buffer
will end up linearized, one way or another.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Messages transferred by TIPC are assigned an "importance priority", -an
integer value indicating how to treat the message when there is link or
destination socket congestion.
There is no separate header field for this value. Instead, the message
user values have been chosen in ascending order according to perceived
importance, so that the message user field can be used for this.
This is not a good solution. First, we have many more users than the
needed priority levels, so we end up with treating more priority
levels than necessary. Second, the user field cannot always
accurately reflect the priority of the message. E.g., a message
fragment packet should really have the priority of the enveloped
user data message, and not the priority of the MSG_FRAGMENTER user.
Until now, we have been working around this problem in different ways,
but it is now time to implement a consistent way of handling such
priorities, although still within the constraint that we cannot
allocate any more bits in the regular data message header for this.
In this commit, we define a new priority level, TIPC_SYSTEM_IMPORTANCE,
that will be the only one used apart from the four (lower) user data
levels. All non-data messages map down to this priority. Furthermore,
we take some free bits from the MSG_FRAGMENTER header and allocate
them to store the priority of the enveloped message. We then adjust
the functions msg_importance()/msg_set_importance() so that they
read/set the correct header fields depending on user type.
This small protocol change is fully compatible, because the code at
the receiving end of a link currently reads the importance level
only from user data messages, where there is no change.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct tipc_link contains one single queue for outgoing packets,
where both transmitted and waiting packets are queued.
This infrastructure is hard to maintain, because we need
to keep a number of fields to keep track of which packets are
sent or unsent, and the number of packets in each category.
A lot of code becomes simpler if we split this queue into a transmission
queue, where sent/unacknowledged packets are kept, and a backlog queue,
where we keep the not yet sent packets.
In this commit we do this separation.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The unicast packet header contains a broadcast acknowledge sequence
number, that may need to be conveyed to the broadcast link for proper
treatment. Currently, the function tipc_rcv(), which is on the most
critical data path, calls the function tipc_bclink_acknowledge() to
have this done. This call is made for each received packet, and results
in the unconditional grabbing of the broadcast link spinlock.
This is unnecessary, since we can see directly from tipc_rcv() if
the acknowledged number differs from what has been previously acked
from the node in question. In the vast majority of cases the numbers
won't differ, and there is nothing to update.
We now make the call to tipc_bclink_acknowledge() conditional
to that the two ack values differ.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we currently extract a bundled buffer from a message bundle in
the function tipc_msg_extract(), we allocate a new buffer and explicitly
copy the linear data area.
This is unnecessary, since we can just clone the buffer and do
skb_pull() on the clone to move the data pointer to the correct
position.
This is what we do in this commit.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, TIPC linearizes all incoming buffers directly at reception
before passing them upwards in the stack. This is clearly a waste of
CPU resources, and must be avoided.
In this commit, we eliminate this unnecessary linearization. We still
ensure that at least the message header is linear, and that the buffer
is linearized where this is still needed, i.e. when unbundling and when
reversing messages.
In addition, we ensure that fragmented messages are validated after
reassembly before delivering them upwards in the stack.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function link_buf_validate() is in reality re-entrant and context
independent, and will in later commits be called from several locations.
Therefore, we move it to msg.c, make it outline and rename the it to
tipc_msg_validate().
We also redesign the function to make proper use of pskb_may_pull()
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TIPC protocol spec has defined a 13 bit capability bitmap in
the neighbor discovery header, as a means to maintain compatibility
between different code and protocol generations. Until now this field
has been unused.
We now introduce the basic framework for exchanging capabilities
between nodes at first contact. After exchange, a peer node's
capabilities are stored as a 16 bit bitmap in struct tipc_node.
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix inconsistency in the semantics of the scale attribute.
For scale the write_raw function was considering the scale table index
and writing the appropriate value into the range register, while
for read_raw it was outputting the actual scale.
Fix this behaviour and adhere to the iio ABI specification.
Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Reviewed-by: Viorel Suman <viorel.suman@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A hardware fifo reset always imply an invalidation of the
existing timestamps, so we'll clear timestamps fifo on
successfull hardware fifo reset.
Signed-off-by: Viorel Suman <viorel.suman@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Without this change file name for hmc5843 is empty in
/sys/bus/iio/devices/iio\:device*/name
With this change name is reported correctly:
cat /sys/bus/iio/devices/iio\:device*/name
hmc5843
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Currently driver reports device bandwidth list as available
sampling frequency. But sampling frequency is actually twice
the device bandwidth. This patch fixes this issue.
Signed-off-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This block should not be enabled by default or else if the kconfig is set,
it will try to load/probe even if there's no phy connected.
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G4si
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.0-20150314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
Hello David, this is a pull request for net/master, consisting of two patches:
In the first patch Michal Simek enables the xilinx CAN driver for ARM64. The
second patch by Ahmed S. Darwish fixes a race condition in the tx-queue of the
kvaser_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The regexp option is a nice way to catch even weirder paths like the current
drivers/gpu/drm/rockchip/* or others in the future.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan Hedberg says:
====================
Here's another set of Bluetooth & ieee802154 patches intended for 4.1:
- Added support for QCA ROME chipset family in the btusb driver
- at86rf230 driver fixes & cleanups
- ieee802154 cleanups
- Refactoring of Bluetooth mgmt API to allow new users
- New setting for static Bluetooth address exposed to user space
- Refactoring of hci_dev flags to remove limit of 32
- Remove unnecessary fast-connectable setting usage restrictions
- Fix behavior to be consistent when trying to pair already paired device
- Service discovery corner-case fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds ABI documentation entries for in_proximity_en,
in_proximity_type, and in_proximity_index in the scan_elements directory.
At least one user for these is present, the AS3935 Franklin lightning sensor.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch adds ABI documentation entries for in_magn_offset.
There is one user, hid-sensor-magn-3d in drivers/iio/magnetometer.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Qx9q
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux
Pull file locking bugfix from Jeff Layton:
"Just a small fix for a potential problem in one of the lease
tracepoints"
* tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux:
locks: fix generic_delete_lease tracepoint to use victim pointer
- add TLB invalidation for page table tear-down which was missed when
support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table
freeing was always deferred)
- use UEFI for system and reset poweroff if available
- fix asm label placement in relation to the alignment statement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q1+X
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- add TLB invalidation for page table tear-down which was missed when
support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table
freeing was always deferred)
- use UEFI for system and reset poweroff if available
- fix asm label placement in relation to the alignment statement
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: put __boot_cpu_mode label after alignment instead of before
efi/arm64: use UEFI for system reset and poweroff
arm64: Invalidate the TLB corresponding to intermediate page table levels
selftests/exec: Check if the syscall exists and bail if not
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WFmj
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"selftests/exec: Check if the syscall exists and bail if not"
* tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/exec: Check if the syscall exists and bail if not
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@
-EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
These registers are also changed by transceiver and should be volatile
for right accessing via regmap debugfs.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a handling for calibration if we are 5 minutes in PLL
state. I first tried to implement the calibration functionality in
TX_ON state via register values CF_START and DCU_START, but this occurs
a one second delay at each calibration time.
An another solution to start a calibration is to switch from TRX_OFF
state into TX_ON, then a calibration is done automatically by
transceiver. This method will be used in this patch, after each transmit
of a frame we check with jiffies if the PLL is set 5 minutes without
doing a TRX_OFF->(TX_ON || RX_AACK_ON) or channel switch. The worst case
would be a transceiver in receiving mode only, but this is under normal
operation very unlikely.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Cc: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch replace the state change timing relevant sleeps with
hrtimers. Currently the sleeps are done in the complete handler of
spi_async. The relation of doing the state change timing sleep with a
timer will get the sleep functionality out of spi_async complete handler
context.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch initialize xtal_trim value to zero. The xtal_trim property is
an optional device tree value. Currently if no xtal_trim property is
given the xtal_trim value can be contain random data, because it's a
stack variable. This patch init the xtal_trim value to zero which is
also the default value after reset for at86rf230 transceivers.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch fix the max sifs size correction when the
IEEE802154_HW_TX_OMIT_CKSUM flag is set. With this flag the sk_buff
doesn't contain the CRC, because the transceiver will add the CRC
while transmit.
Also add some defines for the max sifs frame size value and frame check
sequence according to 802.15.4 standard.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It's only necessary to offer the name and index, others value are
available over netlink.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently the wpan_phy under /sys/class/ieee802154/ is named as
"wpan-phy#", this patch will change the name to phy. This will
introduce the same naming convention like wireless.
Note: wpan-tools users will not type "wpan-phy#" anymore, just a simple
"phy#" is enough.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently there exists two interface types with ARPHRD_IEEE802154. These
are the 802.15.4 interfaces and 802.15.4 6LoWPAN interfaces. This is
more a bug because some userspace applications checks on this value like
wireshark. This occurs that wireshark will always try to parse a lowpan
interface as 802.15.4 frames. With ARPHRD_6LOWPAN wireshark will parse
it as IPv6 frames which is correct.
Much applications checks on this value to readout the EUI64 mac address
which should be the same for ARPHRD_6LOWPAN. BTLE 6LoWPAN and ieee802154
6LoWPAN will share now the same ARPHRD.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
